saia-burgess Switches Ph: 800-429-0365 www.saia-burgess-usa.com Fax: 847-549-9625
B2
B
Snap-action Microswitches – Subminiature XC
XC
Characteristics
KWide range of actuating forces
KLong mechanical and electrical life
KSolder, PCB, faston (quick connect) terminals
Rating
Up to 250 V, 10 A
Dimensions (mm)
19.9 x 9.5 x 6.4
Actuator
Plunger, plain, roller, plastic, simulated roller lever
Approvals
UL, cUL, CSA, ENEC
Preferred Product Range
Ordering Reference
Actuating Force Operating
position
Terminal Circuit Actuator Contacts Electrical rating
(N) (oz) (mm) (in) ENEC UL/CSA
XCG3Z1
1.7 6.07 8.4 0.33 Solder CO Plunger Ag 6(2) A 5 A
XCG3-J1Z1
0.6 2.14 10.2 0.40 Solder CO Plain lever Ag 6(2) A 5 A
XCG3-S1Z1
0.7 2.49 15.6 0.61 Solder CO Roller lever Ag 6(2) A 5 A
XCG5Z1
1.7 6.07 8.4 0.33 Faston 2.8 x 0.5 mm CO Plunger Ag 6(2) A 5 A
XCG5-J1Z1
0.6 2.14 10.2 0.40 Faston 2.8 x 0.5 mm CO Plain lever Ag 6(2) A 5 A
XCG5-S1Z1
0.7 2.49 15.6 0.61 Faston 2.8 x 0.5 mm CO Roller lever Ag 6(2) A 5 A
XCG8Z1
1.7 6.07 8.4 0.33 PCB CO Plunger Ag 6(2) A 5 A
XCG8-J1Z1
0.6 2.14 10.2 0.40 PCB CO Plain lever Ag 6(2) A 5 A
XCG8-S1Z1
0.7 2.49 15.6 0.61 PCB CO Roller lever Ag 6(2) A 5 A
XCF3Z1
3.0 10.70 8.4 0.33 Solder CO Plunger Ag 10(3) A 10.1 A
XCF3-J1Z1
1.05 3.74 10.2 0.40 Solder CO Plain lever Ag 10(3) A 10.1 A
XCF3-S1Z1
1.1 3.92 15.6 0.61 Solder CO Roller lever Ag 10(3) A 10.1 A
saia-burgess Switches Ph: 800-429-0365 www.saia-burgess-usa.com Fax: 847-549-9625 B3
B
Snap-action Microswitches – Subminiature XC
Specifications
Housing Phenolic-Melamine, Thermosetting
Plunger POM for T85, PBT for T140
Mechanism Snap-action system with stainless steel tension spring
Functions Change-over, NO, NC
Contacts Pure silver (Ag) or 10 µm Gold (Au), microprofile
Terminals Solder, faston and various PCB terminals (side of housing or side of lid, as well as 1/10” o lin pitch)
Temperature range ºC -40°C to +85°C (special version up to 140°C)
Mechanical life up to 5–107cycles (sinusoidal actuation)
Protection Enclosure IP40
Mounting Side mounting through mounting holes
Actuators Stainless steel, PA66-GF35
Contact Carrier CuZn or CuSn
Circuit
diagram
Dimensions
(mm)
abd
0.5
2.3 + 0.05
– 0.02
2.4
7. 5
2.35 + 0.1
– 0.15
2.5 + 0.05
– 0.02
9.5 ± 0.1
19.9 + 0.25
– 0.35
3.45 3.2
5.25 + 0.20
– 0.25
8.85
OP
FP
6.4 ± 0.2
9.5
0.4
3.1
4
3.6
+ 0.2
– 0.3
4.8
2.4
1.3
Recommended Maximum Electrical Ratings
Voltage Resistive load Motor load Approvals ENEC Approvals UL
(VAC) (A) (A) (A) (VAC) (A) (VAC)
XCF
250 10 3 10 (3) 250 1E4 10.1 250
XCG
250 6 2 6 (2) 250 5E4 5 250
XCK
250 5 3 5 (3) 250 1E4 5 250
XCC
250 3 1 3 (1) 250 5E4 2 250
XCH
250 1.5 0.3 1.5 (0.3) 250 5E4 0.1 30
CO NO NC
FP = Free Position
OP = Operating Position
saia-burgess Switches Ph: 800-429-0365 www.saia-burgess-usa.com Fax: 847-549-9625
B4
B
Snap-action Microswitches – Subminiature XC
Operating Characteristics
Actuating Release Free Operating Movement Total travelled
Actuator Reference Force Force Position Position Differential position
Maximum Minimum Maximum Maximum Maximum
(N) (oz) (N) (oz) (mm) (in) (mm) (in) (mm) (in) (mm) (in)
Plunger
XCF.. 3 10.70 0.5 1.78 8.8 0.34 8.4 0.33 0.1 0.003 7.7 0.30
(mm)
XCG.. 1.7 6.07 0.3 1.07 8.8 0.34 8.4 0.33 7.7 0.30
XCK.. 1.2 4.28 0.2 0.71 8.8 0.34 8.4 0.33 0.1 0.003 7.7 0.30
XCC.. 0.6 2.14 0.1 3.57 8.8 0.34 8.4 0.33 0.1 0.003 7.7 0.30
XCH.. 0.35 1.24 0.07 0.24 8.8 0.34 8.4 0.33 0.1 0.003 7.7 0.30
-J1 Lever
XCF.. 1.05 3.74 0.16 0.57 12.2 0.48 10.2 ± 1.0 0.401 ± 0.039 0.6 0.023 8.4 0.33
(mm)
XCG.. 0.6 2.14 0.08 0.28 12.2 0.48 10.2 ± 0.9 0.401 ± 0.035 0.5 0.019 8.5 0.34
XCK.. 0.42 1.49 0.056 0.19 12.2 0.48 10.3 ± 0.9 0.405 ± 0.035 0.5 0.019 8.7 0.34
XCC.. 0.22 0.78 0.025 0.08 12.2 0.48 10.3 ± 0.9 0.404 ± 0.035 0.4 0.015 8.7 0.34
XCH.. 0.13 0.46 0.02 0.07 12.2 0.48 10.4 ± 0.9 0.409 ± 0.035 0.4 0.015 8.8 0.35
Width of lever 4.0 mm/0.16 in
-L1 Lever
XCF.. 1.1 3.92 0.17 0.6 17.6 0.69 15.6 ± 1.1 0.614 ± 0.043 0.6 0.023 14 0.56
(mm)
XCG.. 0.7 2.49 0.09 0.32 17.6 0.69 15.6 ± 1.0 0.614 ± 0.039 0.5 0.019 14.1 0.56
XCK.. 0.43 1.53 0.058 0.2 17.6 0.69 15.7 ± 1.0 0.618 ± 0.039 0.4 0.015 14.3 0.56
XCC.. 0.23 0.82 0.026 0.09 17.6 0.69 15.7 ± 1.0 0.618 ± 0.039 0.4 0.015 14.3 0.56
XCH.. 0.14 0.49 0.021 0.07 17.6 0.69 15.8 ± 1.0 0.622 ± 0.039 0.4 0.015 14.4 0.57
Width of lever 4.0 mm/0.16 in
-S1 Lever
XCF.. 1.1 3.92 0.17 0.6 17.6 0.69 15.6 ± 1.2 0.614 ± 0.047 0.6 0.023 14.1 0.56
(mm)
XCG.. 0.7 2.49 0.09 0.32 17.6 0.69 15.6 ± 1.1 0.614 ± 0.043 0.5 0.019 14.2 0.56
XCK.. 0.43 1.53 0.058 0.2 17.6 0.69 15.7 ± 1.1 0.618 ± 0.043 0.4 0.015 14.4 0.57
XCC.. 0.23 0.82 0.026 0.09 17.6 0.69 15.7 ± 1.1 0.618 ± 0.043 0.4 0.015 14.4 0.57
XCH.. 0.14 0.49 0.021 0.07 17.6 0.69 15.8 ± 1.1 0.622 ± 0.043 0.4 0.015 14.5 0.57
Width of roller 4.0 mm/0.16 in. for high temperature use -T1 lever
-P5 Lever
XCF.. 1.3 4.62 0.17 0.6 17.6 0.69 15.6 ± 1.1 0.614 ± 0.043 0.6 0.023 14 0.55
(mm)
XCG.. 0.75 2.67 0.09 0.32 17.6 0.69 15.6 ± 1.0 0.614 ± 0.039 0.5 0.019 14.1 0.56
XCK.. 0.6 2.13 0.058 0.2 17.6 0.69 15.7 ± 1.0 0.618 ± 0.039 0.4 0.015 14.3 0.56
XCC.. 0.31 1.10 0.026 0.09 17.6 0.69 15.7 ± 1.1 0.618 ± 0.043 0.4 0.015 14.3 0.56
XCH.. 0.22 0.78 0.021 0.07 17.6 0.69 15.8 ± 1.0 0.622 ± 0.039 0.4 0.015 14.4 0.57
-P6 Lever
XCF.. 1.05 3.74 0.16 0.57 14.3 0.56 12.5 ± 1.1 0.49 ± 0.043 0.6 0.023 10.6 0.42
(mm)
XCG.. 0.6 2.13 0.08 0.28 14.3 0.56 12.5 ± 1.0 0.49 ± 0.039 0.5 0.019 10.7 0.42
XCK.. 0.42 1.49 0.056 0.21 14.3 0.56 12.6 ± 1.0 0.5 ± 0.039 0.5 0.015 10.8 0.43
XCC.. 0.22 0.78 0.025 0.11 14.3 0.56 12.6 ± 1.0 0.5 ± 0.039 0.4 0.015 10.8 0.43
XCH.. 0.13 0.46 0.02 0.07 14.3 0.56 12.7 ± 1.0 0.5 ± 0.039 0.4 0.015 10.9 0.43
Ls
Lo
7.5
2.4
6.1
18.0
12.7
Lo
Ls
16
5.9
60º
6.1
12.7
Ls
Lo
Ø 4.8
6.1
12.7
Ls
Lo
16.8
+0.003
–0.011
+0.1
–0.3
saia-burgess Switches Ph: 800-429-0365 www.saia-burgess-usa.com Fax: 847-549-9625 B5
B
Snap-action Microswitches – Subminiature XC
Actuating
XCF 3 N 6.07 oz
Characteristic
XCG 1.7 N 10.70 oz
XCK 1.2 N 4.28 oz
XCC 0.6 N 2.14 oz
XCH 0.35 N 1.24 oz
Circuits
No digit Change-over
4 Normally closed (NC 2)
5 Normally open (NO 4)
Terminals
3 Solder
4 Faston 2.8 x 0.5 mm DIN
5 Faston 2.8 x 0.5 mm IEC/AMP
8 PCB (straight)
9 PCB (1/10” pitch)
10 Side mounting PCB, Base side
11 Side mounting PCB, cover side
Other terminals on special request.
Version
No digit, Housing material MP, Europe up to 85°C, UL up to 90°C
V (High temperature 125°C), Housing material MP / Plunger PBT, Europe up to 125°C, UL up to 130°C
W (High temperature 140°C), Housing material Polyester PBT, Europe up to 140°C, UL up to 150°C
Contacts
No digit Ag (silver)
-81 µ profile Au 10 µm
Actuators
No digit Plunger
-J1 Plain lever 18.0 mm (0.71 in)
-J2 Plain lever 25.0 mm (0.98 in)
-J5 Plain lever 40.0 mm (1.57 in)
-S1 Roller lever 16.8 mm (0.66 in)
-L1 Cam follower 16.0 mm (0.63 in)
-P5 Plastic lever 16.0 mm (0.63 in)
-P6 Plastic lever 18.0 mm (0.71 in)
Other actuators on special request.
Ordering Reference – How to Build a Part Number
