1
Power entry modules without line filter 6135
www.schurter.com/pg05
Connectors
IEC appliance inlet C14 with circuit breaker TA35, 2-pole
C14
70° C
Description
- Panel Mount:
Snap-in version from front side
- 2 Functions:
Appliance inlet, Protection class I, Circuit breaker type TA35, 2-pole
- Quick connect terminal 6.3 x 0.8 mm
- Alternative: version for 16 A (20 A) 6136
- Substitute for type 7764
Approvals
- VDE License Number: 40023066
- UL License Number: E96454
Characteristics
- Unwired
- Switch non-illuminated or illuminated
Thermal overload protection
- Qualified for use in equipment according IEC/EN 60950
Other versions on request
- Pre-wired version
- Quick-connect terminals 4.8 x 0.8 mm
- Protection class II, 70°C
Weblinks
Approvals, RoHS, CHINA-RoHS, e-Store, SCHURTER-Stock-Check,
Distributor-Stock-Check
Technical Data
Ratings IEC 10 A / 250 VAC; 50 Hz
Ratings UL/CSA 15 A / 250 VAC; 60 Hz
Dielectric Strength > 2.5 kVAC between L-N
> 3 kVAC between L/N-PE
(1 min/50 Hz)
Allowable Operation Temp. -25 °C to 60 °C
Degree of Protection from front side IP 40 acc. to IEC 60529
Protection Class Suitable for appliances with protection
class I acc. to IEC 61140
Terminal Quick connect terminals 6.3 x 0.8 mm
Panel Thickness s Snap-in 1.5/ 2/ 2.5 mm
Material: Housing Thermoplastic, black, UL 94V-0
Appliance-Inlet/-Outlet C14 acc. to IEC/EN 60320-1
UL 498, CSA C22.2 no. 42 (for cold
conditions) pin-temperature 70 °C, 10 A,
Protection class I
Circuit breaker Acc. IEC/EN 60934, UL 1077, CSA
22.2 no. 235
2-pole rocker switch, illuminated or non-
illuminated.
Conditional short circuit Inc:
2000A
Dimensions Length 65.4 mm
R 3
59
58.8 x 27.2
+0.20
0
27.4 +0.20
0
max. R 0.2
S± 0.05
31.830
28.4
10.6 3.2
6
65.4
3
Power entry modules without line filter 6135
www.schurter.com/pg05
Connectors
Technical data (continued)
Circuit breaker
Tripping characteristics
In < 3 A
Tripping characteristics
In > 3... < 15 A
Effect of ambient temperature
The unit is calibrated for an ambient temperature of +23 °C. To
determine the rated current for lower or higher ambient temperature,
use a correction factor from the table below.
* Ambient Correction factor
temperature [°C]
–25 0.79
–20 0.81
0 0.90
+23 1.00
+40 1.03
+50 1.04
+60 1.06
* Temperature must be measured at the rear of the breaker
next to the terminals after equipment operating tempera-
ture has been reached.
Example:
Rated current at +23 °C 10 A
Ambient temperature +60 °C
Correction factor 1.06
Chosen rated current at +60 °C
ambient temperature: 10 A x 1.06 = 10.6 A
Type Order code TA35
6135 C B D W F 1 2 0 C 0 . 0 2 1 0
see table 1
Order code (Order example)
Please note that Schurter will establish an
internal part number for logistica use in
addition to the order code. The format of
this internal part number is, for example:
6135.xxxx.xxxx
Wiring
1 wired
0 unwired
Terminals
1 Quick connect 6.3 x 0.8 mm
0 Protection class 1
Mounting
2 Snap-in s = 1.5 mm
3 Snap-in s = 2.0 mm
4 Snap-in s = 2.5 mm
The above tripping characteristics apply to symmetrical overloads on the two poles.
At asymmetric overloads on two pole types the tripping current will be increased by factor 1.05 (TC-2).
Type pTA3 5
Rated current <3 A (TC-1, TC-2)
Ambient temp. +23 °C
Multiple of rated current [ x In ]
1,05 10854321,35
Tripping time
10'000
60
2`000
1`000
500
200
100
50
20
10
[ sec ][ min ]
10
5
1
30
20
5
2
1
0,5
0,3
0,2
0,1
1,05 10854321,35
10'000
60
2`000
1`000
500
200
100
50
20
10
[ sec [ min ]
10
5
1
30
20
5
2
1
0,5
0,3
0,2
0,1
]
> 3–15A (TC-1, TC-2)
Type TA35
Rated current
Ambient temp. +23 °C
Multiple of rated current [ x In ]
Tripping time
4
Power entry modules without line filter
6135
www.schurter.com/pg05
Connectors
Rated current In (A)
Other rated currents on request
In Code
1,0 J10
2,0 J20
4,0 040
5,0 050
6,0 060
In Code
8,0 080
10,0 100
12,0 120
15,0 150
F 120 C0
No other
features
F embossed
H printed white
K printed black
L printed white
M printed black
Surface Illustration Colour of print
Rocker legend
l
0
ON
OFF
ON
OFF
ll
00
Other legends on request
Colours
Switch front Rocker
non-illuminated illuminated
W black white –
B black black –
3 black – red transparent
4 black – green transparent
6 black – orange transparent
Other colours on request
CBD W
TA35-
ORDER CODE
Switch without CBT CBD
illumination
Switch illuminated 240 V C12 C32
120 V C14 C34
Other versions on request
Table 1 Selection for type TA35
Order example
Position of the rocker
legend e.g. F
LINE
LOAD
LINE
LOAD
Number of switched poles 2-pole
Number of protected poles 1 2
5
Power entry modules without line filter 6135
www.schurter.com/pg05
Connectors
Packaging unit 40 Pcs
Accessory
Description
Assorted Covers
Rear Cover
Cord retaining kits
Cord retainning strain reliefe
Mating Outlet/Connector
Category / Description
Appliance Inlet
IEC cord connector C15, rewirable, angled 0169
Appliance Outlet
IEC cord connector C15, rewirable, straight 0101
IEC cord connector C15A, rewirable, straight 0102
IEC cord connector C15A, rewirable, straight 0102-G
IEC cord connector C15A, rewirable, angled 0112
IEC cord connector C13, rewirable, angled 4012
IEC cord connector C13, rewirable, angled 4013
IEC cord connector C13, rewirable, straight 4020
IEC cord connector C13, rewirable, straight 4021
IEC cord connector C13, rewirable, straight 4022
IEC cord connector C13, rewirable, angled 4300-06
...
Power Entry Module
Power Cord with IEC Appliance Connector C13, angled, 70°C 0311
Power Cord with IEC Appliance Connector C13, angled, 70°C 3011
Power Cord with IEC Appliance Connector C13, angled, 70°C 3012
Power Cord with IEC Appliance Connector C13, angled, 70°C 3013
Power Cord with IEC Appliance Connector C13, 70°C 3020
Power Cord with IEC Appliance Connector C13, straight, 70°C 3027
Power Cord with IEC Appliance Connector C13, straight, 70°C 302U
Power Cord with IEC Appliance Connector C13, straight, 70°C 3030
Power Cord with IEC Appliance Connector C13, angled, 70°C 311L
Power Cord with IEC Appliance Connector C13, angled, 70°C 312L
...
6
Power entry modules without line filter
6135
www.schurter.com/pg05
Connectors
Category / Description
xxx
IEC appliance outlet F oder H, screw-on mounting, front side, solder/PCB/quick connect terminal 5091
IEC appliance outlet F oder H, screw-on mounting, front side, solder/quick connect terminal 5092
The specifications, descriptions and illustrations indicated in this document are based on
current information. All content is subject to modifications and amendments.
