For price, delivery, and to place orders, please contact Maxim Distribution at 1-888-629-4642,
or visit Maxim’s website at www.maxim-ic.com.
General Description
The MAX7418–MAX7425 5th-order, low-pass, switched-
capacitor filters (SCFs) operate from a single +5V
(MAX7418–MAX7421) or +3V (MAX7422–MAX7425)
supply. These devices draw only 3mA of supply current
and allow corner frequencies from 1Hz to 45kHz, mak-
ing them ideal for low-power post-DAC filtering and anti-
aliasing applications. They feature a shutdown mode
that reduces supply current to 0.2µA.
Two clocking options are available: self-clocking
(through the use of an external capacitor), or external
clocking for tighter corner-frequency control. An offset
adjust pin allows for adjustment of the DC output level.
The MAX7418/MAX7422 deliver 53dB of stopband
rejection and a sharp rolloff with a 1.6 transition ratio.
The MAX7421/MAX7425 achieve a sharper rolloff with a
1.25 transition ratio while still providing 37dB of stop-
band rejection. The MAX7419/MAX7423 Bessel filters
provide low overshoot and fast settling, and the
MAX7420/MAX7424 Butterworth filters provide a maxi-
mally flat passband response. Their fixed response sim-
plifies the design task of selecting a clock frequency.
Applications
ADC Anti-Aliasing CT2 Base Stations
DAC Postfiltering Speech Processing
Features
5th-Order, Lowpass Filters
Elliptic Response (MAX7418/MAX7421/
MAX7422/MAX7425)
Bessel Response (MAX7419/MAX7423)
Butterworth Response (MAX7420/MAX7424)
Clock-Turnable Corner Frequency (1Hz to 45kHz)
Single-Supply Operation
+5V (MAX7418–MAX7421)
+3V (MAX7422–MAX7425)
Low Power
3mA (Operating Mode)
0.2µA (Shutdown Mode)
Available in 8-Pin µMAX Package
Low Output Offset: ±4mV
MAX7418–MAX7425
5th-Order, Lowpass,
Switched-Capacitor Filters
________________________________________________________________ Maxim Integrated Products 1
OS
OUTVDD
1
2
8
7
CLK
SHDNIN
GND
COM
µMAX
TOP VIEW
3
4
6
5
MAX7418–
MAX7425
VDD
IN
CLK
OUT
GND
INPUT
0.1µF
0.1µF
CLOCK
SHDN
OUTPUT
VSUPPLY
COM
OS
MAX7418
MAX7425
Typical Operating Circuit
19-1821; Rev 0; 11/00
Pin Configuration
Ordering Information
Selector Guide
PART
MAX7418EUA -40°C to +85°C
TEMP. RANGE PIN-PACKAGE
8 µMAX
Selector Guide continued at end of data sheet.
Ordering Information continued at end of data sheet.
MAX7418CUA 0°C to +70°C 8 µMAX
MAX7419CUA 0°C to +70°C 8 µMAX
MAX7419EUA -40°C to +85°C 8 µMAX
MAX7420CUA 0°C to +70°C 8 µMAX
MAX7420EUA -40°C to +85°C 8 µMAX
MAX7421CUA 0°C to +70°C 8 µMAX
MAX7421EUA -40°C to +85°C 8 µMAX
PART FILTER RESPONSE OPERATING
VOLTAGE (V)
MAX7418 r = 1.6 +5
MAX7419 Bessel +5
MAX7420 Butterworth +5
MAX7421 r = 1.25 +5
MAX7418–MAX7425
5th-Order, Lowpass,
Switched-Capacitor Filters
2 _______________________________________________________________________________________
ABSOLUTE MAXIMUM RATINGS
ELECTRICAL CHARACTERISTICSMAX7418MAX7421
(VDD = +5V, filter output measured at OUT, 10k|| 50pF load to GND at OUT, OS = COM, 0.1µF capacitor from COM to GND,
SHDN = VDD, fCLK = 2.2MHz, TA= TMIN to TMAX, unless otherwise noted. Typical values are at TA= +25°C.)
Stresses beyond those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. These are stress ratings only, and functional
operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to
absolute maximum rating conditions for extended periods may affect device reliability.
VDD to GND..............................................................-0.3V to +6V
IN, OUT, COM, OS, CLK, SHDN ................-0.3V to (VDD + 0.3V)
OUT Short-Circuit Duration.......................................................1s
Continuous Power Dissipation (TA= +70°C)
8-Pin µMAX (derate 4.1mW/°C above +70°C) .............330mW
Operating Temperature Ranges
MAX74 _ _C_A ...................................................0°C to +70°C
MAX74 _ _E_A ................................................-40°C to +85°C
Junction Temperature......................................................+150°C
Storage Temperature Range .............................-65°C to +160°C
Lead Temperature (soldering, 10s) .................................+300°C
CLOCK
FILTER CHARACTERISTICS
86 110 135
±50 ±75
MAX7419/MAX7420
MAX7418/MAX7421
MAX7419/MAX7420
MAX7418/MAX7421
-0.2 0 +0.2MAX7419/MAX7420
MAX7418/MAX7421
0.001 to 30VIN = 4Vp-p (Note 1)
Input Voltage Range at OS
2.0 2.5 3.0
COM Voltage Range
Maximum Capacitive Output
Load Drive
UNITS
kHz
ppm/°C
V
mV
dB
V/V
V
V
k
mVp-p
k
pF
µA
µA
kHz
µA
V
V
Clock Output Current
(Internal Oscillator Mode) ICLK
±40 ±60
Clock Input High VIH 4.5
Clock Input Low VIL 0.5
VCLK = 0 or 5V
PARAMETER SYMBOL MIN TYP MAX
DC Insertion Gain with
Output Offset Removed
0 0.2 0.4
Output Offset Voltage VOFFSET ±4 ±25
Output Voltage Range 0.25 VDD - 0.25
Clock-to-Corner Tempco 10
Offset Voltage Gain AOS 1
VCOM
Corner Frequency fc
Clock-to-Corner Ratio fCLK /f
C100:1
2.3 2.5 2.7
VOS VCOM ±0.1
Input Resistance at COM RCOM 100 140
Clock Feedthrough 5
Resistive Output Load Drive RL10 1
CL50 500
Input Leakage Current at COM ±0.1 ±10
Input Leakage Current at OS ±0.1 ±10
Internal Oscillator Frequency fOSC
68 87 106
CONDITIONS
Output, COM unconnected
VCOM = VDD / 2
(Note 2)
VIN = VCOM = VDD / 2
Input, OS externally driven
OS to OUT
Input, COM externally driven
SHDN = GND, VCOM = 0 to VDD
VOS = 0 to VDD
COSC = 1000pF
(Note 3)
-78MAX7419
MAX7418 -76
-78MAX7421
MAX7420 dB
Total Harmonic Distortion
plus Noise THD+N -67
fIN = 2kHz,
VIN = 4Vp-p,
measurement
bandwidth = 80kHz
FILTER CHARACTERISTICS
CLOCK
MAX7418–MAX7425
5th-Order, Lowpass,
Switched-Capacitor Filters
_______________________________________________________________________________________ 3
Corner-Frequency Range 0.001 to 45
5th-Order, Lowpass,
Switched-Capacitor Filters
ELECTRICAL CHARACTERISTICSMAX7418MAX7421 (continued)
(VDD = +5V, filter output measured at OUT, 10k|| 50pF load to GND at OUT, OS = COM, 0.1µF capacitor from COM to GND,
SHDN = VDD, fCLK = 2.2MHz, TA= TMIN to TMAX, unless otherwise noted. Typical values are at TA= +25°C.)
ELECTRICAL CHARACTERISTICSMAX7422MAX7425
(VDD = +3V, filter output measured at OUT pin, 10k|| 50pF load to GND at OUT, OS = COM, 0.1µF capacitor from COM to GND,
SHDN = VDD, fCLK = 2.2MHz, TA= TMIN to TMAX, unless otherwise noted. Typical values are at TA= +25°C.)
FILTER CHARACTERISTICS
0.001 to 45
MAX7423/MAX7424
MAX7422/MAX7425
-0.2 0 +0.2MAX7423/MAX7424
MAX7422/MAX7425
UNITS
kHz
ppm/°C
V
mV
dB
V/V
V
k
mVp-p
k
pF
µA
µA
PARAMETER SYMBOL MIN TYP MAX
DC Insertion Gain with Output
Offset Removed
0 0.2 0.4
Output Offset Voltage VOFFSET ±4 ±25
Output Voltage Range 0.25 VDD - 0.25
Clock-to-Corner Tempco 10
Offset Voltage Gain AOS 1
VCOM
fC
Clock-to-Corner Ratio fCLK/fC100:1
Input Voltage Range at OS VOS VCOM ±0.1
Input Resistance at COM RCOM 100 140
Clock Feedthrough 3
Resistive Output Load Drive RL10 1
CL50 500
Input Leakage Current at COM ±0.1 ±10
Input Leakage Current at OS ±0.1 ±10
CONDITIONS
VCOM = VDD / 2
(Note 2)
VIN = VCOM = VDD / 2
Measured with respect to COM
OS to OUT
VIN = 2.5Vp-p
(Note 1)
SHDN = GND, VCOM = 0 to VDD
VOS = 0 to VDD
Maximum Capacitive Load
at OUT
-81MAX7423
MAX7422 -80
-80MAX7425
MAX7424 dB
Total Harmonic Distortion plus
Noise THD+N -70
fIN = 2kHz,
VIN = 2.5Vp-p,
measurement
bandwidth = 80kHz
1.4 1.5 1.6Input, COM externally driven VCOM Voltage Range 1.4 1.5 1.6Output, COM internally driven
FILTER CHARACTERISTICS
SHUTDOWN
POWER REQUIREMENTS
3.4 4.1MAX7419/MAX7420
MAX7418/MAX7421
µA±0.2 ±10
VSHDN = 0 to VDD
SHDN Input Leakage Current
UNITS
V
mA
µA
dB
V
V
Supply Voltage VDD 4.5 5.5
IDD
Supply Current 2.9 3.6
Shutdown Current ISHDN 0.2 1
Power-Supply Rejection Ratio PSRR 70
SHDN Input High VSDH 4.5
SHDN Input Low VSDL 0.5
Operating mode,
no load
SHDN = GND
IN = COM (Note 4)
PARAMETER SYMBOL MIN TYP MAXCONDITIONS
MAX7418–MAX7425
5th-Order, Lowpass,
Switched-Capacitor Filters
4 _______________________________________________________________________________________
FILTER CHARACTERISTICS
(VDD = +5V for MAX7418–MAX7421, VDD = +3V for MAX7422–MAX7425 filter output measured at OUT, 10k|| 50pF load to GND at
OUT, SHDN = VDD, fCLK = 2.2MHz, TA = TMIN to TMAX, unless otherwise noted.)
ELECTRICAL CHARACTERISTICSMAX7422MAX7425 (continued)
(VDD = +3V, filter output measured at OUT pin, 10k|| 50pF load to GND at OUT, OS = COM, 0.1µF capacitor from COM to GND,
SHDN = VDD, fCLK = 2.2MHz, TA= TMIN to TMAX, unless otherwise noted. Typical values are at TA= +25°C.)
CONDITIONS MIN TYP MAXSYMBOLPARAMETER
Measured at DC
SHDN = GND
0.5VSDL
SHDN Input Low
2.5VSDH
SHDN Input High
70PSRRPower-Supply Rejection Ratio
0.2 1ISHDN
Shutdown Current
2.6 3.4
2.7 3.6VDD
Supply Voltage
V
V
dB
µA
V
UNITS
SHDN Input Leakage Current VSHDN = 0 to VDD ±0.2 ±10 µA
COSC = 1000pF
(Note 3)
68 87 106
fOSC
Internal Oscillator Frequency kHz
0.5VIL
Clock Input Low V
2.5VIH
Clock Input High V
68 87 106
ICLK
Clock Output Current (Internal
Oscillator Mode) kHz
MAX7422/MAX7425
MAX7423/MAX7424 86 110 135
MAX7422/MAX7425
MAX7423/MAX7424 86 110 135
Operating mode,
no load 3.0 3.8
Supply Current IDD mA
MAX7422/MAX7425
MAX7423/MAX7424
MIN TYP MAXCONDITIONSPARAMETER
-0.4 ±0.2 0.4fIN = 0.38fC
UNITS
Insertion Gain with DC Gain
Error Removed (Note 4) dB
fIN = 0.68fC-0.4 ±0.2 0.4
-0.4 ±0.2 0.4fIN = 0.87fC
-36 -33fIN = 1.25fC
fIN = 0.97fC-0.4 ±0.2 0.4
-0.7 ±0.2 0.2fIN = fC
fIN = 1.43fC-37.2 -35
-1 -0.74fIN = 0.5fC
fIN = 3.25fC-37.2 -35
Insertion Gain Relative to
DC Gain dB
fIN = fC-3.6 -3.0 -2.4
fIN = 4fC-41.0 -35
-67 -60fIN = 7fC
CLOCK
POWER REQUIREMENTS
ELLIPTIC, r = 1.2MAX7421/MAX7425
BESSEL FILTERSMAX7419/MAX7423
SHUTDOWN
MAX7418–MAX7425
5th-Order, Lowpass,
Switched-Capacitor Filters
_______________________________________________________________________________________ 5
Note 1: The maximum fCis defined as the clock frequency fCLK = 100 x fCat which the peak S / (THD+N) drops to 68dB with a
sinusoidal input at 0.2fC. Maximum fC increases as VIN signal amplitude decreases.
Note 2: DC insertion gain is defined as VOUT / VIN.
Note 3: MAX7418/MAX7421/MAX7422/MAX7425: fOSC (kHz) 87x103/ COSC (pF).
MAX7419/MAX7420/MAX7423/MAX7424: fOSC (kHz) 110x103/ COSC (pF).
Note 4: PSRR is the change in output voltage from a VDD of 4.5V and a VDD of 5.5V.
-70 -65fIN = 5fC
-47.5 -43
-3.6 -3.0 -2.4fIN = fC
fIN = 3fC
-0.3 0
dB
fIN = 0.5fC
PARAMETER MIN TYP MAX UNITSCONDITIONS
BUTTERWORTH FILTERSMAX7420/MAX7424BUTTERWORTH FILTERSMAX7420/MAX7424
FILTER CHARACTERISTICS
(VDD = +5V for MAX7418–MAX7421, VDD = +3V for MAX7422–MAX7425 filter output measured at OUT, 10k|| 50pF load to GND at
OUT, SHDN = VDD, fCLK = 2.2MHz, TA = TMIN to TMAX, unless otherwise noted.)
__________________________________________Typical Operating Characteristics
(VDD = +5V for MAX7418–MAX7421, VDD = +3V for MAX7422–MAX7425, fCLK = 2.2MHz, SHDN = VDD, VCOM = VOS = VDD / 2,
TA= +25°C, unless otherwise noted.)
-90
-60
-70
-80
-50
-40
-30
-20
-10
0
10
04020 60 80 100
MAX7418/MAX7422
FREQUENCY RESPONSE (ELLIPTIC, r = 1.6)
MAX7418 toc01
INPUT FREQUENCY (kHz)
GAIN (dB)
-60
-40
-50
-20
-30
0
-10
10
04020 60 80 100
MAX7419/MAX7423
FREQUENCY RESPONSE (BESSEL)
MAX7418 toc02
INPUT FREQUENCY (kHz)
GAIN (dB)
-80
-60
-70
-30
-40
-50
0
-10
-20
10
04020 60 80 100
MAX7420/MAX7424
FREQUENCY RESPONSE (BUTTERWORTH)
MAX7418 toc03
INPUT FREQUENCY (kHz)
GAIN (dB)
Insertion Gain Relative to
DC Gain
____________________________Typical Operating Characteristics (continued)
(VDD = +5V for MAX7418–MAX7421, VDD = +3V for MAX7422–MAX7425, fCLK = 2.2MHz, SHDN = VDD, VCOM = VOS = VDD / 2,
TA= +25°C, unless otherwise noted.
MAX7418–MAX7425
5th-Order, Lowpass,
Switched-Capacitor Filters
6 _______________________________________________________________________________________
-90
-60
-70
-80
-50
-40
-30
-20
-10
0
10
04020 60 80 100
MAX7421/MAX7425
FREQUENCY RESPONSE (ELLIPTIC, r = 1.25)
MAX7418 toc04
INPUT FREQUENCY (kHz)
GAIN (dB)
-4.0
-3.0
-3.5
-1.5
-2.0
-2.5
0
-0.5
-1.0
0.5
09.04.5 13.5 18.0 22.5
MAX7420/MAX7424
PASSBAND FREQUENCY RESPONSE
(BUTTERWORTH)
MAX7418 toc07
INPUT FREQUENCY (kHz)
GAIN (dB)
MAX7418 toc05
-1.0
-0.6
-0.8
-0.2
-0.4
0.2
0
0.4
0 9.04.5 13.5 18.0 22.5
MAX7418/MAX7422
PASSBAND FREQUENCY RESPONSE
(ELLIPTIC, r = 1.6)
INPUT FREQUENCY (kHz)
GAIN (dB)
-4.0
-3.0
-3.5
-1.5
-2.0
-2.5
0
-0.5
-1.0
0.5
09.04.5 13.5 18.0 22.5
MAX7419/MAX7423
PASSBAND FREQUENCY RESPONSE
(BESSEL)
MAX7418 toc06
INPUT FREQUENCY (kHz)
GAIN (dB)
-1.0
-0.6
-0.8
-0.2
-0.4
0.2
0
0.4
0 9.04.5 13.5 18.0 22.5
MAX7421/MAX7425
PASSBAND FREQUENCY RESPONSE
(ELLIPTIC, r = 1.25)
MAX7418 toc08
INPUT FREQUENCY (kHz)
GAIN (dB)
-450
-350
-400
-200
-250
-300
-50
-100
-150
0
08124 16202428
MAX7418/MAX7422
PHASE RESPONSE (ELLIPTIC, r = 1.6)
INPUT FREQUENCY (kHz)
PHASE SHIFT (DEGREES)
MAX7418 toc09
-250
-200
-100
-150
-50
0
084 1216202428
MAX7419/MAX7423
PHASE RESPONSE (BESSEL)
MAX7418 toc10
INPUT FREQUENCY
(
kHz
)
PHASE SHIFT (DEGREES)
-350
-250
-300
-150
-200
-50
-100
0
08124 16202428
MAX7420/MAX7424
PHASE RESPONSE (BUTTERWORTH)
MAX7418 toc11
INPUT FREQUENCY
(
kHz
)
PHASE SHIFT (DEGREES)
-450
-350
-400
-200
-250
-300
-50
-100
-150
0
08124 16202428
MAX7424/MAX7425
PHASE RESPONSE (ELLIPTIC, r = 1.25)
MAX7418 toc12
INPUT FREQUENCY
(
kHz
)
PHASE SHIFT (DEGREES)
____________________________Typical Operating Characteristics (continued)
(VDD = +5V for MAX7418–MAX7421, VDD = +3V for MAX7422–MAX7425, fCLK = 2.2MHz, SHDN = VDD, VCOM = VOS = VDD / 2,
TA= +25°C, unless otherwise noted.
MAX7418–MAX7425
5th-Order, Lowpass,
Switched-Capacitor Filters
_______________________________________________________________________________________ 7
-90
-70
-80
-40
-50
-60
-10
-20
-30
0
021 345
MAX
741
8
THD + NOISE vs. INPUT SIGNAL AMPLITUDE
(ELLIPTIC, r = 1.6)
MAX7418 toc13
AMPLITUDE (Vp-p)
THD
+
N
(dB)
SEE TABLE A
D
E
-90
-70
-80
-40
-50
-60
-10
-20
-30
0
021 345
MAX7421
THD + NOISE vs. INPUT SIGNAL AMPLITUDE
(ELLIPTIC, r = 1.25)
MAX7418 toc16
AMPLITUDE (Vp-p)
THD + N (dB)
SEE TABLE A
D
E
-90
-70
-80
-40
-50
-60
-10
-20
-30
0
021 345
MAX7419
THD + NOISE vs. INPUT SIGNAL AMPLITUD
E
(BESSEL)
MAX7418 toc14
AMPLITUDE (Vp-p)
THD + N (dB)
SEE TABLE A
D
E-90
-70
-80
-40
-50
-60
-10
-20
-30
0
021 345
MAX7420
THD + NOISE vs. INPUT SIGNAL AMPLITUDE
(BUTTERWORTH)
MAX7418 toc15
AMPLITUDE (Vp-p)
THD + N (dB)
SEE TABLE A
D
E
-90
-70
-80
-40
-50
-60
-10
-20
-30
0
0 1.00.5 1.5 2.0 2.5 3.0
MAX7422
THD + NOISE vs. INPUT SIGNAL AMPLITUDE
(ELLIPTIC, r = 1.6)
MAX7418 toc17
AMPLITUDE (Vp-p)
THD + N (dB)
B
A
C
SEE TABLE A
-90
-70
-80
-40
-50
-60
-10
-20
-30
0
01.00.5 1.5 2.0 2.5 3.0
MAX7423
THD + NOISE vs. INPUT SIGNAL AMPLITUDE
(BESSEL)
MAX7418 toc18
AMPLITUDE (Vp-p)
THD + N (dB)
A
C
B
SEE TABLE A
-90
-70
-80
-40
-50
-60
-30
-20
-10
0
0 0.5 1.0 1.5 2.0 2.5 3.0
MAX7424
THD + NOISE vs. INPUT SIGNAL AMPLITUDE
(BUTTERWORTH)
MAX7418 toc19
AMPLITUDE (Vp-p)
THD + N (dB)
B
A
C
SEE TABLE A
-90
-70
-80
-40
-50
-60
-30
-20
-10
0
0 0.5 1.0 1.5 2.0 2.5 3.0
MAX7425
THD + NOISE vs. INPUT SIGNAL AMPLITUDE
(ELLIPTIC, r = 1.25)
MAX7418 toc20
AMPLITUDE (Vp-p)
THD + N (dB)
B
A
C
SEE TABLE A
0
2000
1000
4000
3000
6000
5000
7000
INTERNAL OSCILLATOR FREQUENCY
vs. SMALL CAPACITANCE (pF)
MAX7418 toc21
CAPACITANCE ( pF)
OSCILLATOR FREQUENCY (kHz)
1 10 100 1000 10000
ELLIPTIC
BESSEL/BUTTERWORTH
____________________________Typical Operating Characteristics (continued)
(VDD = +5V for MAX7418–MAX7421, VDD = +3V for MAX7422–MAX7425, fCLK = 2.2MHz, SHDN = VDD, VCOM = VOS = VDD / 2,
TA= +25°C, unless otherwise noted.
MAX7418–MAX7425
5th-Order, Lowpass,
Switched-Capacitor Filters
8 _______________________________________________________________________________________
0
2
1
4
3
5
6
10 100 1000
INTERNAL OSCILLATOR FREQUENCY
vs. LARGE CAPACITANCE (nF)
MAX7418 toc22
CAPACITANCE (nF)
OSCILLATOR FREQUENCY (Hz)
ELLIPTIC
BESSEL/BUTTERWORTH
2.3
2.5
2.9
2.7
3.1
3.3
2.5 3.53.0 4.0 4.5 5.0 5.5
ELLIPTIC SUPPLY CURRENT
vs. SUPPLY VOLTAGE
MAX7418 toc25
SUPPLY VOLTAGE (V)
SUPPLY CURRENT (µA)
84.0
85.0
84.5
86.0
85.5
86.5
87.0
2.5 3.5 4.03.0 4.5 5.0 5.5
ELLIPTIC INTERNAL OSCILLATOR
FREQUENCY vs. SUPPLY VOLTAGE
MAX7418 toc23
SUPPLY VOLTAGE (V)
OSCILLATOR FREQUENCY (kHz)
COSC = 1000PF
84.0
85.0
84.5
86.0
85.5
86.5
87.0
-40 10-15 356085
ELLIPTIC INTERNAL OSCILLATOR
FREQUENCY vs. TEMPERATURE
MAX7418 toc24
TEMPERATURE (°C)
OSCILLATOR FREQUENCY (kHz)
VDD = 3V
VDD = 5V
COSC = 1000pF
2.5
2.6
2.8
2.7
2.9
3.0
-40 10-15 35 60 85
ELLIPTIC SUPPLY CURRENT
vs. TEMPERATURE
MAX7418 toc26
TEMPERATURE (°C)
SUPPLY CURRENT (mA)
VDD = 5V
VDD = 3V
1
fIN
(kHz)
2
2
1
2
10
fC
(kHz)
E
30
22
10
22
1000
LABEL
A
B
fCLK
(kHz)
3000
2200
1000C
D2200
22
BW
(kHz)
80
80
22
80
Table A.
MAX7418–MAX7425
5th-Order, Lowpass,
Switched-Capacitor Filters
_______________________________________________________________________________________ 9
Pin Description
_______________Detailed Description
The MAX7418/MAX7421/MAX7422/MAX7425 elliptic
lowpass filters provide sharp rolloff with good stopband
rejection. The MAX7419/MAX7423 Bessel filters provide
low overshoot and fast settling responses, and the
MAX7420/MAX7424 Butterworth filters provide a maxi-
mally flat passband response. All parts operate with a
100:1 clock-to-corner frequency ratio.
Most switch capacitor filters (SCFs) are designed with
biquadratic sections. Each section implements two
pole-zero pairs, and the sections can be cascaded to
produce higher order filters. The advantage to this
approach is ease of design. However, this type of
design is highly sensitive to component variations if any
section’s Q is high. The MAX7418–MAX7425 use an
alternative approach, which is to emulate a passive net-
work using switched-capacitor integrators with sum-
ming and scaling. The passive network may be
synthesized using CAD programs, or may be found in
many filter books. Figure 1 shows a basic 5th-order lad-
der filter structure.
Typical Operating Characteristics (continued)
(VDD = +5V for MAX7418–MAX7421, VDD = +3V for MAX7422–MAX7425, fCLK = 2.2MHz, SHDN = VDD, VCOM = VOS = VDD / 2,
TA= +25°C, unless otherwise noted.
0
0.5
1.5
1.0
2.0
2.5
2.5 3.53.0 4.0 4.5 5.0 5.5
DC OFFSET VOLTAGE
vs. SUPPLY VOLTAGE
MAX7418 toc28
SUPPLY VOLTAGE (V)
DC OFFSET VOLTAGE (mV)
0
1.0
0.5
2.0
1.5
2.5
3.0
-40 10-15 356085
DC OFFSET VOLTAGE
vs. TEMPERATURE
MAX7418 toc27
TEMPERATURE (°C)
DC OFFSET VOLTAGE (mV)
VDD = 5V
VDD = 3V
Filter OutputOUT5
Offset Adjust Input. To adjust output offset, connect OS to an external supply through a resistive voltage-
divider (Figure 4). Connect OS to COM if no offset adjustment is needed. See the Offset and Common-Mode
Input Adjustment section.
OS6
Shutdown Input. Drive low to enable shutdown mode; drive high or connect to VDD for normal operation.
SHDN
7
Clock Input. Connect an external capacitor (COSC) from CLK to ground. To override the internal oscillator,
connect CLK to an external clock: fC= fCLK /100.
CLK8
Positive Supply Input: +5V for MAX7418–MAX7421, +3V for MAX7422–MAX7425. Bypass VDD to GND with
a 0.1µF capacitor.
VDD
4
Ground GND3
PIN
Filter InputIN2
Common Input Pin. Biased internally at midsupply. Bypass COM externally to GND with a 0.1µF capacitor.
To override internal biasing, drive COM with an external supply.
COM1
FUNCTIONNAME
MAX7418–MAX7425
5th-Order, Lowpass,
Switched-Capacitor Filters
10 ______________________________________________________________________________________
An SCF that emulates a passive ladder filter retains
many of the same advantages. The component sensi-
tivity of a passive ladder filter is low when compared to
a cascaded biquadratic design because each compo-
nent affects the entire filter shape rather than a single
pole-zero pair. In other words, a mismatched compo-
nent in a biquadratic design has a concentrated error
on its respective poles, while the same mismatch in a
ladder filter design spreads its error over all poles.
Elliptic Characteristics
Lowpass elliptic filters such as the MAX7418/MAX7421/
MAX7422/MAX7425 provide the steepest possible
rolloff with frequency of the four most common filter
types (Butterworth, Bessel, Chebyshev, and elliptic).
The high-Q value of the poles near the passband edge
combined with the stopband zeros allow for the sharp
attenuation characteristic of elliptic filters, making these
devices ideal for anti-aliasing and post-DAC filtering in
single-supply systems (see Anti-Aliasing and Post-DAC
Filtering).
In the frequency domain, the first transmission zero
causes the filter’s amplitude to drop to a minimum level
(Figure 2). Beyond this zero, the response rises as the
frequency increases until the next transmission zero.
The stopband begins at the stopband frequency, fS. At
frequencies above fS, the filter’s gain does not exceed
the gain at fS. The corner frequency, fC, is defined as
the point at which the filter output attenuation falls just
below the passband ripple. The transition ratio (r) is
defined as the ratio of the stopband frequency to the
corner frequency:
r = fS / fC
The MAX7418/MAX7422 have a transition ratio of 1.6
and typically 53dB of stopband rejection. The
MAX7421/MAX7425 have a transition ratio of 1.25 (pro-
viding a steeper rolloff) and typically 37dB of stopband
rejection.
Bessel Characteristics
Lowpass Bessel filters such as the MAX7419/MAX7423
delay all frequency components equally, preserving the
line up shape of step inputs (subject to the attenuation
of the higher frequencies). Bessel filters settle quickly—
an important characteristic in applications that use a
multiplexer (mux) to select an input signal for an ana-
log-to-digital converter (ADC). An anti-aliasing filter
placed between the mux and the ADC must settle
quickly after a new channel is selected.
Butterworth Characteristics
Lowpass Butterworth filters such as the MAX7420/
MAX7424 provide a maximally flat passband response,
making them ideal for instrumentation applications that
require minimum deviation from the DC gain throughout
the passband.
The difference between Bessel and Butterworth filters
can be observed when a 1kHz square wave is applied
to the filter input (Figure 3, trace A). With the filter cutoff
frequencies set at 5kHz, trace B shows the Bessel filter
response and trace C shows the Butterworth filter
response.
Clock Signal
External Clock
These SCFs are designed for use with external clocks
that have a 40% to 60% duty cycle. When using an
external clock, drive the CLK pin with a CMOS gate
powered from 0 to VDD. Varying the rate of the external
clock adjusts the corner frequency of the filter:
ff
CCLK
=100
L4
C5C3
C1
VIN
+
-RL
L2
RS
Figure 1. 5th-Order Ladder Filter Network
PASSBAND STOPBAND
GAIN (dB)
FREQUENCY
fCfS
fS
fCfS
fC
TRANSITION RATIO =
RIPPLE
Figure 2. Elliptic Filter Response
MAX7418–MAX7425
5th-Order, Lowpass,
Switched-Capacitor Filters
______________________________________________________________________________________ 11
Internal Clock
When using the internal oscillator, the capacitance
(COSC) on CLK determines the oscillator frequency:
where
k = 87 x 103 for the
MAX7418/MAX7421/MAX7422/MAX7425
and
k = 110 x 103for the
MAX7419/MAX7420/MAX7423/ MAX7424.
Since COSC is in the low picofarads, minimize the stray
capacitance at CLK so that it does not affect the inter-
nal oscillator frequency. Varying the rate of the internal
oscillator adjusts the filter’s corner frequency by a
100:1 clock-to-corner frequency ratio. For example, an
internal oscillator frequency of 2.2MHz produces a
nominal corner frequency of 2.2kHz.
Input Impedance vs. Clock Frequencies
The MAX7418–MAX7425s’ input impedance is effective
as a switched-capacitor resistor and is inversely propor-
tional to frequency. The input impedance values deter-
mined by the equation represents the average input
impedance, since the input current is not continuous.
As a rule, use a driver with an output resistance less
than 10% of the filter’s input impedance.
Estimate the input impedance of the filter by using the
following formula:
where fCLK = clock frequency and CIN = 1pF.
Low-Power Shutdown Mode
The MAX7418–MAX7425 have a shutdown mode that is
activated by driving SHDN low. In shutdown mode, the
filter supply current reduces to 0.2µA, and the output of
the filter becomes high impedance. For normal opera-
tion, drive SHDN high or connect to VDD.
Applications Information
Offset (OS) and Common-Mode (COM)
Input Adjustment
COM sets the common-mode input voltage and is
biased at midsupply with an internal resistor-divider. If
the application does not require offset adjustment, con-
nect OS to COM. For applications in which offset
adjustment is required, apply an external bias voltage
through a resistor-divider network to OS, as shown in
Figure 4. For applications that require DC level shifting,
adjust OS with respect to COM. (Note: Do not leave OS
unconnected.) The output voltage is represented by
these equations:
where (VIN - VCOM) is lowpass filtered by the SCF and
OS is added at the output stage. See the Electrical
Characteristics table for the input voltage range of COM
VVVV
VVtyp
OUT IN COM OS
COM DD
( )
()
=− +
=2
Z 1
(f C )
IN CLK IN
=×
f
OSC(kHz) k
COSC(pF)
=
VDD
VSUPPLY
IN
CLK
GND
INPUT
OUTPUT
50k
50k
50k
OUT
0.1µF
0.1µF
0.1µF
CLOCK
SHDN
COM
OS
MAX7418
MAX7425
Figure 4. Offset Adjustment Circuit
A
2V/div
2V/div
2V/div
C
A: 1kHz INPUT SIGNAL
B: MAX7419 BESSEL FILTER RESPONSE; fC = 5kHz
C: MAX7420 BUTTERWORTH FILTER RESPONSE; fC = 5kHz
B
200µs/div
Figure 3. Bessel vs. Butterworth Filter Response
MAX7418–MAX7425
5th-Order, Lowpass,
Switched-Capacitor Filters
12 ______________________________________________________________________________________
and OS. Changing the voltage on COM or OS signifi-
cantly from midsupply reduces the dynamic range.
Power Supplies
The MAX7418–MAX7421 operate from a single +5V
supply and the MAX7422–MAX7425 operate from a sin-
gle +3V supply. Bypass VDD to GND with a 0.1µF
capacitor. If dual supplies are required, connect COM
to the system ground and GND to the negative supply.
Figure 5 shows an example of dual-supply operation.
Single-supply and dual-supply performance are equiv-
alent. For either single-supply or dual-supply operation,
drive CLK and SHDN from GND (V- in dual supply
operation) to VDD. Use the MAX7418–MAX7421 for
±2.5, and use the MAX7422–MAX7425 for ±1.5V. For
±5V dual-supply applications, refer to the MAX291/
MAX292/MAX295/MAX296 and MAX293/MAX294/
MAX297 data sheets.
Input Signal Amplitude Range
The optimal input signal range is determined by observ-
ing the voltage level at which the signal-to-noise plus
distortion (SINAD) ratio is maximized for a given corner
frequency. The Typical Operating Characteristics show
the THD + Noise response as the input signal’s peak-to-
peak amplitude is varied.
Anti-Aliasing and Post-DAC Filtering
When using the MAX7418–MAX7425 for anti-aliasing or
post-DAC filtering, synchronize the DAC (or ADC) and
the filter clocks. If the clocks are not synchronized, beat
frequencies may alias into the desired passband.
Harmonic Distortion
Harmonic distortion arises from nonlinearities within the
filter. These nonlinearities generate harmonics when a
pure sine wave is applied to the filter input. Tables 1, 2,
and 3 list typical harmonic distortion values with a 10k
load at TA= +25°C.
Table 1. MAX7418/MAX7421/MAX7422/MAX7425 Typical Harmonic Distortion
FILTER fIN
(kHz)
VIN
(Vp-p)
MAX7418 2
MAX7421 2
24
2nd 4th
fCLK
(MHz)
2.2
1.5
2
<-80<-80
<-80
MAX7422
4
TYPICAL HARMONIC DISTORTION (dB)
<-80
<-80
4
22
4.0
2.2
<-80<-80
<-80
<-80
<-80
<-80
<-80
<-80
<-80
<-80 <-80
3rd 5th
2.2
1.5
<-80<-80
<-80
4
<-80
<-80
MAX7425 22
4.0
2.2
<-80
<-80
<-80
<-80
<-80
<-80
<-80
<-80
<-80
<-80
<-80
VDD
V+
V-
IN
CLK
GND
INPUT
OUTPUTOUT
0.1µF
CLOCK
*CONNECT SHDN TO V- FOR LOW-POWER SHUTDOWN MODE.
SHDN
COM
OS
0.1µF
MAX7418
MAX7425
*
V+
V-
Figure 5. Dual-Supply Operation
MAX7418–MAX7425
5th-Order, Lowpass,
Switched-Capacitor Filters
______________________________________________________________________________________ 13
Table 3. MAX7419/MAX7423 Typical Harmonic Distortion
Table 2. MAX7420/MAX7424 Typical Harmonic Distortion
Chip Information
TRANSISTOR COUNT: 1457
PROCESS: BiCMOS
Ordering Information (continued)
PART TEMP. RANGE PIN-PACKAGE
MAX7423CUA
MAX7423EUA -40°C to +85°C
0°C to +70°C 8 µMAX
8 µMAX
MAX7422CUA 0°C to +70°C 8 µMAX
MAX7422EUA -40°C to +85°C 8 µMAX
PART FILTER RESPONSE OPERATING
VOLTAGE (V)
MAX7422 r = 1.6 +3
MAX7423 Bessel +3
MAX7424 Butterworth +3
MAX7425 r = 1.25 +3
Selector Guide (continued)
MAX7424CUA 0°C to +70°C 8 µMAX
MAX7424EUA -40°C to +85°C 8 µMAX
MAX7425CUA 0°C to +70°C 8 µMAX
MAX7425EUA -40°C to +85°C 8 µMAX
FILTER fIN
(kHz)
VIN
(Vp-p)
MAX7420 2
24
-77
< -80
TYPICAL HARMONIC DISTORTION (dB)
< -80
< -80
2nd 4th
fCLK
(MHz)
2.2
1.5
3
MAX7424 22
3.5
2.2
< -80
< -80
< -80
< -80
-67 -76
-70
-70
-77
< -80
< -80
< -80
3rd 5th
FILTER fIN
(kHz)
VIN
(Vp-p)
MAX7419 2
24
< -80
< -80
TYPICAL HARMONIC DISTORTION (dB)
< -80
< -80
2nd 4th
fCLK
(MHz)
2.2
1.5
3
MAX7423 22
3.5
2.2
< -80
< -80
< -80
< -80
-77 < -80
-80
-75
< -80
< -80
< -80
< -80
3rd 5th
MAX7418–MAX7425
5th-Order, Lowpass,
Switched-Capacitor Filters
Maxim cannot assume responsibility for use of any circuitry other than circuitry entirely embodied in a Maxim product. No circuit patent licenses are
implied. Maxim reserves the right to change the circuitry and specifications without notice at any time.
14 ____________________Maxim Integrated Products, 120 San Gabriel Drive, Sunnyvale, CA 94086 408-737-7600
© 2000 Maxim Integrated Products Printed USA is a registered trademark of Maxim Integrated Products.
________________________________________________________Package Information
8LUMAXD.EPS