Datasheet Intel(R) Dialogic(R) D/120JCT-LS Combined Media Board The D/120JCT-LS board is a 12port analog PCI board ideal for developing advanced communications applications that require multimedia resources. This highperformance, scalable product supports voice, fax, and software-based speech recognition processing in a single PCI slot, and provides 12 analog telephone interface circuits for direct connection to analog loop start lines. Features and Benefits Intel in Communications Supports continuous speech processing, a flexible speech processing technology. When coupled with efficient drivers, this off-loads critical real-time signal processing in speech-enabled applications to onboard DSPs. It reduces system latency, increases recognition accuracy, and improves overall system response time for high-density speech solutions. H.100 support ensures a single universal bus standard, allowing simplified expansion to the industry-standard CT Bus Universal 32-bit PCI edge-connector for compatibility with 3.3 volt and 5.0 volt bus signals enables deployment in a wide variety of PCI chassis from popular manufacturers. Support for Windows NT*, Windows 2000*, and Linux* operating systems ensure high reliability in multitasking environments. Caller ID and global dial pulse detection (DPD) support advanced global communications solution. Configure multiple boards in a single PCI chassis for easy and cost-effective system expansion. Spring Ware downloadable signal and call processing firmware provides easy feature enhancement and field-proven performance. PerfectDigit DTMF (touchtone) provides reliable detection during voice playback - lets callers "type-ahead" through menus. Silence-compressed recording eliminates silence and preserves hard disk space. Board Locator Technology eliminates confusing DIP switch or jumper settings and simplifies installation. Supports Simple Network Management Protocol (SNMP) software used for remote CT board diagnostics/management. Earth Recall capability provides support for switches in the UK in addition to complementing existing infrastructure. Intel(R) NetMergeTM Converged Communications Server Software support facilitates multi-vendor application development. Fully supports Japanese CID including the ability to detect polarity reversals while online. Datasheet Intel(R) Dialogic(R) D/120JCT-LS Combined Media Board The D/120JCT-LS board is part of the next generation of Intel(R) Dialogic(R) analog PCI boards, offering the enhanced capabilities an evolving communications market segment demands. The product is ideal for advanced computer telephony (CT)-based communications applications that require multimedia resources. This high-performance, scalable CT product, based on Spring Ware technology, offers a rich set of advanced features in addition to supporting state-of-the-art digital signal processing (DSP) technology and signal processing algorithms, ensuring a competitive edge for your solutions. Advanced features include new voice coders such as G.726 and GSM for complying with Voice Profile for Internet Messaging (VPIM) standards. Advanced features including software-based fax and speech recognition also let developers add robust enhancements without additional hardware. With the support of the industry-standard PCI bus architecture and the international standard CTR21 in a single board, developers can integrate the D/120JCT-LS board at a price and performance level previously unmatched in the communications industry. With all these features and advanced technologies, the 12-port D/120JCT-LS PCI analog voice processing board is well suited as the principal building block for developing multimedia communications applications such as Web-enabled contact centers, unified messaging, and speech-enabled interactive media response (IMR) systems. Spring Ware firmware also provides reliable DTMF detection, DTMF cut-through, and talk off/play off suppression over a wide variety of telephone line conditions. Global dial pulse detection (DPD) algorithm, available as a software option for the D/41JCT-LS board, lets developers use the board in countries with limited touchtone telephone service. The Global DPD product can be optimized on a country-by-country basis to provide superior dial pulse detection. Applications 2 Interactive media response Web-enabled contact center Unified messaging Speech-enabled auto-attendant Intel voice products offer a rich set of advanced features, including state-of-the-art DSP technology and signal processing algorithms, for building the core of any converged communications system. With industrystandard PCI bus expansion boards developers can integrate Intel voice products easily and cost effectively into exactly the type of system they require, with superior performance. Configurations Use the D/120JCT-LS board to build sophisticated CT systems with capabilities such as speech recognition, facsimile, and text-to-speech (TTS). The D/120JCT-LS board shares a common hardware and firmware architecture with other Intel CT Bus and SCbus based boards for maximum flexibility and scalability. Add features or grow the system while protecting your investment in hardware and application code. Applications can be easily ported to lower- or higherline-density platforms with minimal modifications. The D/120JCT-LS board provides 12 channels of call processing and loop start interfaces in a single PCI slot. The unique dual-processor architecture, comprised of DSPs and a general-purpose microprocessor, handles all telephony signaling and performs all DTMF (touchtone) and audio/voice signal processing tasks. Downloaded firmware algorithms such as Spring Ware provide variable voice coding at 24 and 32 Kb/s ADPCM, and 48 and 64 Kb/s -law or A-law PCM. For advanced messaging applications, new low bit rate coders (GSM at 13 Kb/s and G.726 at 32 Kb/s) are also available. Sampling rates and coding methods are selectable on a channel-by-channel basis. Applications can dynamically switch the sampling rate and coding method to optimize data storage or voice quality as the need arises. Spring Ware firmware also reliable DTMF detection, DTMF cut-through, and talk-off/play-off suppression over a wide variety of telephone line conditions. Intel(R) Dialogic(R) D/120JCT-LS Combined Media Board Datasheet CT Bus PSTN (Analog Loop Start Lines) 12 D/120JCT-LS Other CT Bus Products D/120JCT-LS Configuration Diagram Offered as a software option, global dial pulse detection (DPD) converts rotary pulses to DTMF in countries that have limited touchtone telephone service. Global DPD is also optimized in several countries to provide superior dial pulse detection and conversion. Software Support The D/120JCT-LS board is currently supported by the Intel(R) Dialogic(R) System Release (SR) software and software development kits (SDKs) for the Windows NT* and Windows* 2000 operating systems and the SR software and SDKs for Linux* operating systems. These packages contain a set of tools for developing complex multichannel applications. 3 Datasheet Intel(R) Dialogic(R) D/120JCT-LS Combined Media Board Voltage Regulators Trans-hybrid Transformer DC Hold Loop Current Detect Earth Recall/ Hook Switch Analog Connection/ Protection Hi-Z On-hook MF, Ring Detection Chan. 1-12 QSLACs/CODECs Trans-hybrid Transformer DC Hold Loop Current Detect Earth Recall/ Hook Switch Analog Connection/ Protection Hi-Z On-hook MF, Ring Detection Functional Block Diagram Functional Description circuitry. This FCC-approved ring detector is less The D/120JCT-LS board connects 12 analog loop start susceptible to spurious rings created by random telephone lines to 12 onboard call processing voltage fluctuations on the network. Each interface also resources or to other resources via the CT Bus. incorporates circuitry that protects against high-voltage spikes and adverse network conditions and allows This board provides: 4 Interference suppression Ring and on-hook/off-hook signaling control Tone detection and generation Digitization and playback of voice files applications to go off-hook any time during ring cadence without damaging the board. The telephone line interface applies the inbound signal including the ring and on-hook/off-hook signals to analog/digital inputs of a signal converter called a The signals from the 12 loop start telephone lines codec (COder/DECoder) that samples and digitizes connected to the D/120JCT-LS board first pass through these signals. These digitized signals are sent to a a telephone line interface that provides transient QSLAC chip where they are routed via the CT Bus protection and electromagnetic interference (EMI) either to an onboard Motorola* 56303 Onyx DSP or to suppression (see daughterboard block diagram). an external resource on any of the 1024 CT Bus time These telephone line interfaces use reliable, solid-state slots. This enables the application to reroute calls to hook switches (no mechanical contacts) and FCC-Part any added resource, such as speech recognition, 68 Class A ring voltage and Class B ring frequency facsimile, or text-to-speech (TTS). Intel(R) Dialogic(R) D/120JCT-LS Combined Media Board Datasheet Part of the D/120JCT-LS board's telephone interface includes an on-hook audio path that detects Caller ID information. Depending on the level of service offered by the local telephone provider, Caller ID can include the date, time, caller's telephone number, and the name of the person calling (in some enhanced Caller ID environments). The on-hook audio path can also detect touchtones while the line is on-hook. This capability lets developers use the D/120JCT-LS board behind PBXs that require on-hook touchtone detection for signaling. When the onboard call processing resources are used, the network signals are extracted and passed to the onboard control processor, which can change channel status and communicate channel events to the application via a shared RAM and the host PC PCI bus. The Motorola 56303 Onyx DSP processes the digitized voice data based on Spring Ware firmware loaded in code/data RAM. Each Motorola 56303 Onyx DSP performs the following signal analysis and operations. On the incoming data: Applies automatic gain control (AGC) to compensate for variations in the level of the incoming audio signal Applies an Adaptive Differential Pulse Code Modulation (ADPCM), Pulse Code Modulation (PCM) algorithm, G.726 32 Kb/s coding or GSM, to compress the digitized voice and save disk storage space Detects the presence of tones (DTMF, MF, or an application-defined, single or dual tone) Detects silence to determine whether the line is quiet and the caller is not responding For outbound data: Expands stored, compressed audio data for playback Adjusts the volume and rate of speed of playback upon application or user request Generates tones -- DTMF, MF, or any applicationdefined general-purpose tone The dual-processor combination also performs the following outbound dialing and call progress monitoring: Transmits an off-hook signal to the telephone network Dials out (places an outbound call) Monitors and reports results: line busy or congested; operator intercept; ring, no answer; or if the call is answered, whether answered by a person, an answering machine, a facsimile machine or a modem When recording speech, the Motorola 56303 Onyx DSP can use digitizing rates from 24 to 64 Kb/s as selected by the application for the best speech quality and most efficient storage. The digitizing rate is selected on a channel-by- channel basis and can be changed each time a record or play function is initiated. The DSPprocessed speech is transmitted by the control processor to the host PC for disk storage. The D/120JCT-LS board can record incoming signals with the telephony interface in either the high-impedance on-hook state or the normal off-hook state. When replaying a stored file, the processor retrieves the voice information from the host PC and passes it to the Motorola 56303 Onyx DSP, which converts the file into digitized voice. The DSP sends the digitized voice responses to the codec, which is controlled by three QSLAC chips. The codec converts the digitized voice into analog voice and sends the voice response to the caller via the telephone line interface. Although this product is capable of recording incoming signals in an on-hook state, applications such as call logging should use the D/160SC-LS-HiZ (ISA form factor), which is specifically designed for analog highimpedance recording. When the system is initialized, Spring Ware firmware is downloaded from the host PC to the board. Spring Ware controls all board operations and gives the board all of its intelligence and enables easy feature enhancements and upgrades. The onboard control processor controls all operations of the D/120JCT-LS board via a local bus and interprets and executes commands from the host PC. This processor handles real-time events, manages data flow to the host PC to provide faster system response time, reduces PC host processing demands, processes DTMF and telephony signaling before passing them to the application, and frees the Motorola 56303 Onyx DSPs to perform signal processing. Communication between the processor and the host PC is via shared RAM that acts as an input/output buffer and thus increases the efficiency of disk file transfers. This RAM interfaces to the host PC via the PCI bus. All operations are interrupt-driven to meet the demands of real-time systems. The Board Locator Technology circuit operates in conjunction with a rotary switch that eliminates the need to set confusing jumpers or DIP switches. 5 Datasheet Intel(R) Dialogic(R) D/120JCT-LS Combined Media Board Technical Specifications Number of ports 12 Maximum boards/operating system 8 (Linux, Windows NT, Windows 2000). Number may be limited by application and system performance. Analog network interface Onboard loop start interface Resource sharing bus CT Bus Control microprocessor Intel(R) 80486 GXSF running at 32.768 MHz with 2 MB SDRAM Digital signal processors Two Motorola* DSP 56303 (Onyx) @ 100 MHz, 24-bit, each with 256 K word private SRAM Bus compatibility PCI compatible (complies with PCISIG Bus Specification, Rev. 2.2) Bus speed 33 MHz maximum Bus mode 32-bit Host Interface Shared memory 32 KB to 64 KB page Interrupt level One IRQ is shared by all D/120JCT-LS boards I/O ports None Trunk type Loop start. Ground start for inbound applications with AC ringing. Telephone Interface1 Impedance 600 Ohms nominal Loop current range 20 mA to 60 mA, (Euro) 20 mA to 120 mA, polarity insenstive Ring detection 40 Vrms to 130 Vrms, 15.3 Hz to 68.0 Hz Echo return loss 17 dB min. (at country impedance) Crosstalk coupling > -75 dB Speech digitization 64 Kb/s, -law PCM (companding to ADPCM performed in Spring Ware) Frequency response 300 Hz to 3400 Hz 3 dB Connector RJ-25, 6-port, 6-position Environmental Requirements +5 VDC 1.2 A +12 VDC 200 mA -12 VDC 80 mA max. Operating temperature 0C to +50C Form factor Universal slot (5 V or 3.3 V) PCI long card 12.28 in. (31.2 cm) long 4.2 in. (10.67 cm) high Safety and EMI Certifications United States Canada UL: 1950 CSA: 225 (by UL) For specific country approval designation, see the Intel Communications Systems Products Global Product Approvals listing on the Intel Web site or contact your Intel technical sales representative 1 6 Estimated MTBF 154,000 hours per Bellcore Method Warranty Intel(R) Telecom Products Warranty Information at http://www.intel.com/network/csp/products/3144web.htm Average speech mandates +16 dB peaks above average and preserves -13 dB valleys below average. Intel(R) Dialogic(R) D/120JCT-LS Combined Media Board Datasheet Spring Ware Firmware Technical Specifications Facsimilie Fax compatibility ITU-T G3 compliant (T.4, T.30) ETSI NET/30 compliant Maximum data rate 14,400 b/s (v.17) send 9600 b/s (v.29) receive Variable speed selection Automatic step-down to 12,000 b/s, 9600 b/s, 7200 b/s, 4800 b/s, and lower Transmit data modes Modified Huffman (MH) Modified Read (MR) Receive data modes MH, MR File data formats Tagged Image File Format (TIFF/F) for transmit/receive MH and MR ASCII-to-fax conversion Host-PC-based conversion Direct transmission of text files All Windows* fonts supported Page headers generated automatically Error correction Detection, reporting, and correction of faulty scan lines Image widths 8.5 in. (215 mm) 10.0 in. (255 mm) 11.9 in. (303 mm) Image scaling Automatic horizontal and vertical scaling between page sizes Polling modes Normal Turnaround Image resolution Normal (203 pels/in. x 98 lines/in.) (203 pels/2.54 cm x 98 lines/2.54 cm) Fine (203 pels/in. x 196 lines/in.) (203 pels/2.54 cm x 196 lines/2.54 cm) Fill minimization Automatic fill bit insertion and stripping Receive range -40 dBm to -7 dBm nominal, configurable by parameter Automatic gain control Application can enable/disable. Above -22 dBm results in full-scale recording, configurable by parameter. Silence detection -40 dBm nominal, software adjustable Transmit level (weighted average) -9.5 dBm nominal, configurable by parameter Transmit volume control 40 dB adjustment range, with application-definable increments and legal limit cap 24 Kb/s 300 Hz to 2600 Hz 3 dB 32 Kb/s 300 Hz to 3400 Hz 3 dB 48 Kb/s 300 Hz to 2600 Hz 3 dB 64 Kb/s 300 Hz to 3400 Hz 3 dB 13 Kb/s GSM @ 8 kHz sampling 24 Kb/s OKI(R) ADPCM @ 6 kHz sampling 32 Kb/s OKI(R) ADPCM @ 8 kHz sampling 32 Kb/s G.726 @ 8 kHz sampling 48 Kb/s -law PCM @ 6 kHz sampling Audio Signal Frequency Response Audio Digitizing 64 Kb/s -law PCM @ 8 kHz sampling Digitization selection Selectable by application on function call-by-call basis Playback speed control Pitch controlled Available for 24 Kb/s and 32 Kb/s data rates Adjustment range: 50% Adjustable through application or programmable DTMF control 7 Datasheet Intel(R) Dialogic(R) D/120JCT-LS Combined Media Board Spring Ware Firmware Technical Specifications (cont.) DTMF Tone Detection DTMF digits 0 to 9, *, #, A, B, C, D per Bellcore LSSGR Sec 6 Dynamic range -38 dBm to -3 dBm per tone, configurable by parameter Minimum tone duration 40 ms, can be increased with software configuration Interdigit timing Detects like digits with a >40 ms interdigit delay Detects different digits with a 0 ms interdigit delay Twist and frequency variation Meets Bellcore LSSGR Sec 6 and EIA 464 requirements Noise tolerance Meets Bellcore LSSGR Sec 6 and EIA 464 requirements for Gaussian, impulse, and power line noise tolerance Cut-through Local echo cancellation permits 100% detection with a >4.5 dB return loss line Talk off Detects less than 20 digits while monitoring Bellcore TR-TSY-000763 standard speech tapes (LSSGR requirements specify detecting no more than 470 total digits). Detects 0 digits while monitoring MITEL speech tape #CM 7291. Tone type Programmable for single or dual Max. number of tones Application-dependent Frequency range Programmable within 300 Hz to 3500 Hz Global Tone Detection Max. frequency deviation Programmable in 5 Hz increments Frequency resolution 5 Hz. Separation of dual-frequency tones is limited to 62.5 Hz at a signal-to-noise ratio of 20 dB. Timing Programmable cadence qualifier, in 10 ms increments Dynamic range Programmable, default set at -6 dBm to -3 dBm per tone Tone type Generate single or dual tones Global Tone Generation Frequency range Programmable within 200 Hz to 4000 Hz Frequency resolution 1 Hz Duration 10 ms increments Amplitude -43 dBm to -3 dBm per tone, programmable MF digits 0 to 9, KP, ST, ST1, ST2, ST3 per Bellcore LSSGR Sec 6, TR-NWT-000506 and CCITT Q.321 Transmit level Complies with Bellcore LSSGR Sec 6, TR-NWT-000506 MF Signaling 8 Signaling mechanism Complies with Bellcore LSSGR Sec 6, TR-NWT-000506 Dynamic range for detection -25 dBm to -3 dBm per tone Acceptable twist 6 dB Acceptable frequency variation Less than 1 Hz Intel(R) Dialogic(R) D/120JCT-LS Combined Media Board Datasheet Spring Ware Firmware Technical Specifications (cont.) Call Progress Analysis Busy tone detection Default setting designed to detect 74 out of 76 unique busy/congestion tones used in 97 countries as specified by CCITT Rec. E., Suppl. #2. Default uses both frequency and cadence detection. Application can select frequency only for faster detection in specific environments. Ring back detection Default setting designed to detect 83 out of 87 unique ring back tones used in 96 countries as specified by CCITT Rec. E., Suppl. #2. Uses both frequency and cadence detection. Positive voice detection accuracy >99% based on tests on a database of real world calls in North America. Performance in other markets may vary. Positive voice detection speed Detects voice in as little as 1/10th of a second Positive answering machine detection accuracy >85% based on application and environment Fax/modem detection Pre-programmed Intercept detection Detects entire sequence of the North American tri-tone. Other intercept tones sequences can be programmed. Dial tone detection before dialing Application enable/disable Supports up to three different user-definable dial tones Programmable dial tone drop out debouncing DTMF digits 0 to 9, *, #, A, B, C, D per Bellcore LSSGR Sec 6, TR-NWT-000506 Tone Dialing Frequency variation Less than 1 Hz Rate 10 digits/s maximum, configurable by parameter Level -4.0 dBm per tone, nominal, configurably parameter 10 digits 0 to 9 Pulsing rate 10 pulses/s, nominal 20 pulses/s for Japan, configurable by parameter Break ratio 60% nominal, configurable by parameter Pulse Dialing Analog Caller Identification Applicable standards Bellcore TR-TSY-000030 Bellcore TR-TSY-000031 TAS T5 PSTN1 ACLIP: 1994 (Singapore) Modem standard Bell 202 or V.23, serial 1200 bits/sec (simplex FSK signaling) Receive sensitivity -48 dBm (-50 dBv) to -1 dBm Noise tolerance Minimum 18 dB SNR over 0 to -48 dBm dynamic range for error-free performance Data formats Single Data Message (SDM) and Multiple Data Message (MDM) formats via API calls and commands Line impedance AC coupled 600 Ohm (@ 1.8 kHz) termination during Caller ID on-hook detection interval Message formats ASCII or binary SDM, MDM message content Analog Display Services Interface (ADSI) FSK generation per Bellcore TR-NWT-000030 CAS tone generation and DTMF detection per Bellcore TR-NWT-001273 Analog levels: 0 dBm0 corresponds to a level of +3 dBm at tip-ring analog point. Values vary depending on country requirements; contact your account manager. 9 Datasheet Intel(R) Dialogic(R) D/120JCT-LS Combined Media Board Hardware System Requirements Intel(R) Pentium(R) processor based (PCI) bus or compatible computer. Operating system hardware requirements vary according to the number of channels being used. Additional Components (with Item Market Names) Multidrop CT Bus cables (CBLCTB68C3DROP, CBLCTB68C4DROP, CBLCTB68C8DROP, CBLCTB68C12DROP, CBLCTB68C16DROP) CT Bus/SCbus adapter (CTBUSTOSCBUSADP) SCbus terminator kits (1SCBUS1TERMKIT, 2SCBUS1TERMKIT, 3SCBUS1TERMKIT) Six-strand RJ-type cable (preferred solution for customers using all 12 channels) (RJ-11 connectors to standard 50-pin Amphenol connector) (CBLD120PCI25PP) plus breakout box (BOB25POSJ11) -- Support for both US and Euro cards -- One cable and one breakout box per board required "Two-into-one" conversion cable (preferred solution for customers using only one or two channels) -- Six cables per board required -- US (CBLRJ14TORJ11YA) and Euro (CBLD120PCIYADAP) cables sold separately 10 To learn more, visit our site on the World Wide Web at http://www.intel.com. 1515 Route Ten Parsippany, NJ 07054 Phone: 1-973-993-3000 IINFORMATION IN THIS DOCUMENT IS PROVIDED IN CONNECTION WITH INTEL(R) PRODUCTS. NO LICENSE, EXPRESS OR IMPLIED, BY ESTOPPEL OR OTHERWISE, TO ANY INTELLECTUAL PROPERTY RIGHTS IS GRANTED BY THIS DOCUMENT. EXCEPT AS PROVIDED IN INTEL'S TERMS AND CONDITIONS OF SALE FOR SUCH PRODUCTS, INTEL ASSUMES NO LIABILITY WHATSOEVER, AND INTEL DISCLAIMS ANY EXPRESS OR IMPLIED WARRANTY, RELATING TO SALE AND/OR USE OF INTEL PRODUCTS INCLUDING LIABILITY OR WARRANTIES RELATING TO FITNESS FOR A PARTICULAR PURPOSE, MERCHANTABILITY, OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT. Intel products are not intended for use in medical, life saving, life sustaining, critical control or safety systems, or in nuclear facility applications. Intel may make changes to specifications, product descriptions, and plans at any time, without notice. Intel, Intel Dialogic, Intel386, Intel486, Pentium, and the Intel logo are trademarks or registered trademarks of Intel Corporation or its subsidiaries in the United States and other countries. *Other names and brands may be claimed as the property of others. Printed in the USA Copyright (c) 2003 Intel Corporation All rights reserved. e Printed on recycled paper. 08/03 00-6046-008