Thermofit Molded Parts Part Number: 101A073X-04 Specification Control Drawing Description : Cap, Round End Limited Distribution NOTES inches 1. All dimensions are in _Y_ [millimeters] P +| 2. Dimensions appearing in table SEE NOTE 4 are as follows: a As Supplied b - After Unrestricted Recovery 3. Coating is optional. As supplied _ ___ | H DIA H DIA dimensions appearing in table are for uncoated parts. When coating is added, entry diameters will be reduced by .06 max. 4. Recovered parts may have angularity of Ww 30 - 45. AS SUPPLIED AFTER UNRESTRICTED RECOVERY TABLE OF DIMENSIONS PART H P w NUMBER Min Max +10% | 20% a b a b 1.55 :71 2.30 10 101A073-X04 | 254] |cie.o] |t5a4] |[25.4] Raychem Rae aE eR OR TON OE Revision: A Part Number : 101A073X04 MENLO PARK, CALIFORNIA 94025 Date: 10/16/96 Description : Cap, Round End Thermofit Molded Parts Part Number: 101A073X-04 Specification Control Drawing Description : Cap, Round End Limited Distribution COMPATABILITY CHART MATERIAL DASH NO} MATERIAL DESCRIPTION RT SPEC COATING SLASH NO. COATING S NO. COATING DESCRIPTION -3 Polyolefin, SemiRigid RT-301 [ ORDERING INFORMATION 101A073 X -04 /XXX Base part number ne Material dash number (See Compatability Chart) Modification number (lf necessary, see front of scd binder or a complete list) Adhesive slash number {If necessary, see Compatability Chart) THIS DRAWING IS SUBJECT TO CHANGE WITHOUT NOTICE; CONSULT YOUR NEAREST FIELD REPRESENTATIVE FOR CURRENT REVISION See SAR DRIVE Revision : A Part Number : 101A073X04 MENLO PARK, CALIFORNIA 94028 Date: 10/16/96 Description : Cap, Round End CAD FILE MP96579