3-1649328-1 - TE CONNECTIVITY

10-2014, Rev. 1014

www.te.com

a TE Connectivity Ltd. company

Datasheets and product speciﬁcation

according to IEC 61810-1 and to be used

only together with the ‘Deﬁnitions’ section.

Datasheets and product data is subject to the

terms of the disclaimer and all chapters of

the ‘Deﬁnitions’ section, available at

http://relays.te.com/definitions

Datasheets, product data, ‘Deﬁnitions’ sec-

tion, application notes and all speciﬁcations

are subject to change.

SCHRACK

General Purpose Relays

PCB Relays

n 1 pole 12A/16A, 1 form C (CO) or 1 form A (NO) contact

n DC or AC coil

n 5kV/10mm coil-contact, reinforced insulation

n Ambient temperature 85°C (DC coil)

n WG version: product in accordance to IEC 60335-1

n Reﬂow version: for THR (Through-Hole Reﬂow) soldering process

Typical applications

Boiler control, timers, garage door control, POS automation, interface

modules

Approvals

VDE Cert. No. 40007571, cULus E214025, cCSAus 1142018;

CQC in preparation

Technical data of approved types on request

Contact Data 12A 16A

Contact arrangement 1 form C (CO) or 1 form A (NO)

Rated voltage 250VAC

Max. switching voltage 400VAC

Rated current 12A 16A

Limiting continuous current 12A 16A, UL: 20A

Limiting making current

max. 4s, duty factor 10% 25A 30A

Breaking capacity max. 3000VA 4000VA

Contact material AgNi 90/10, AgNi 90/10 gold plated

Frequency of operation, with/without load

DC coil 360/72000h-1

AC coil 360/36000h-1

Operate/release time max., DC coil 8/6ms

Bounce time max., DC coil, form A/form B 4/6ms

Electrical endurance see electrical endurance graph1)

Contact ratings

Type Contact Load Cycles

IEC 61810

RT314 DC-coil A (NO) 16A, 250VAC, cosφ=1, 85°C 30x103

RT314 DC-coil C (CO) 16A, 250VAC, cosφ=1, 85°C 10x103

RT314 DC-coil A (NO) 10A, 400VAC, cosφ=1, 85°C 150x103

RT114 DC-coil A (NO) 12A, 250VAC, cosφ=1, 85°C 50x103

RT114 AC-coil A (NO) 12A, 250VAC, cosφ=1, 70°C 100x103

UL 508

RT314 A/B (NO/NC)

20A, 250VAC, general purpose, 85°C

6x103

RT334 A (NO)

16A, 250VAC, gen. purpose, 85°C

50x103

RT314 A (NO) 1hp, 240VAC, 40°C 1x103

RT314 A (NO)

FLA/LRA, 4.5/13.1A, 480VAC, 70°C

100x

103

EN60947-5-1

RT314 DC-coil A/B (NO/NC) 2A, 24VDC, DC13 6.050

EN60730-1

RT314 DC-coil A (NO) 12(2)A, 250VAC, 85°C 100x103

1) For reﬂow solderable versions: actual contact performance may be inﬂuenced by the

reﬂow soldering process.

Contact Data (continued)

Mechanical endurance

DC coil >30x106 operations

AC coil >10x106 operations

AC coil, reﬂow version >5x106 operations

Coil Data

Coil voltage range, DC coil/ AC coil 5 to 110VDC / 24 to 230VAC

Operative range, IEC 61810 2

Coil insulation system according UL class F

Coil versions, DC coil

Coil Rated Operate Release Coil Rated coil

code voltage voltage voltage resistance power

VDC VDC VDC Ω±10%2) mW

005 5 3.5 0.5 62 403

006 6 4.2 0.6 90 400

009 9 6.3 0.9 200 400

012 12 8.4 1.2 360 400

020 20 14.0 2.0 952 420

024 24 16.8 2.4 1440 400

048 48 33.6 4.8 5520 417

060 60 42.0 6.0 85702) 420

110 110 77.0 11.0 288002) 420

2) Coil resistance ±12%.

All ﬁgures are given for coil without pre-energization, at ambient temperature +23°C.

Other coil voltages on request.

Coil versions, AC coil 50/60 Hz

Coil Rated Operate Release Coil Rated coil

code voltage voltage voltage resistance power

VAC VAC VAC Ω±15%3) VA

524 24 18.0 3.6 3503) 0.76

615 115 86.3 17.3 8100 0.76

620 120 90.0 18.0 8800 0.75

700 200 150.0 30.0 24350 0.76

730 230 172.5 34.5 32500 0.74

3) Coil resistance ±10%.

All ﬁgures are given for coil without pre-energization, at ambient temperature +23°C, 50 Hz.

Other coil voltages on request.

Power PCB Relay RT1

F0144-C

10-2014, Rev. 1014

www.te.com

a TE Connectivity Ltd. company

Datasheets and product speciﬁcation

according to IEC 61810-1 and to be used

only together with the ‘Deﬁnitions’ section.

Datasheets and product data is subject to the

terms of the disclaimer and all chapters of

the ‘Deﬁnitions’ section, available at

http://relays.te.com/definitions

Datasheets, product data, ‘Deﬁnitions’ sec-

tion, application notes and all speciﬁcations

are subject to change.

SCHRACK

General Purpose Relays

PCB Relays

Power PCB Relay RT1 (Continued)

Other Data (continued)

Terminal type

standard version PCB-THT, plug-in

reﬂow version PCB-THR

Mounting distance AC coil: ≥2.5mm

Weight 14g

Resistance to soldering heat THT, IEC 60068-2-20

RTII 270°C/10s

RTIII 260°C/5s

Resistance to soldering heat THR

reﬂow soldering (for reﬂow version) forced gas convection 4) or

vapour phase 5)

temperature proﬁle according EN61730

Packaging/unit tube/20 pcs., box/500 pcs.

4) infrared heating not allowed

5) recommended ﬂuid LS/230

Accessories

For details see datasheet

Accessories Industrial Power Relay RT

NOTE: indicated contact ratings and electrical endurance data for direct

wiring of relays (according IEC 61810-1); for relays mounted on sockets

deratings may apply.

Insulation Data

Initial dielectric strength

between open contacts 1000Vrms

between contact and coil 5000Vrms

Clearance/creepage

between contact and coil ≥10/10mm

Material group of insulation parts IIIa

Tracking index of relay base PTI 250V

reﬂow version PTI 175V

Other Data

Material compliance: EU RoHS/ELV, China RoHS, REACH, Halogen content

refer to the Product Compliance Support Center at

www.te.com/customersupport/rohssupportcenter

Resistance to heat and ﬁre

WG version or Reﬂow version according EN60335, par30

Ambient temperature

DC coil -40 to 85°C

AC coil -40 to 70°C

Category of environmental protection, IEC 61810

standard version RTII - ﬂux proof, RTIII - wash tight

reﬂow version RTII - ﬂux proof

Vibration resistance (functional)

form A/form B contact, 30 to 500Hz 20g/5g

Shock resistance (destructive) 100g

PCB layout / terminal assignment

Bottom view on solder pins

12 A, pinning 3.5 mm

1 form C (CO) contact

1 form A (NO) contact

12 A, pinning 5 mm

1 form C (CO) contact

1 form A (NO) contact

16 A, pinning 5 mm

1 form C (CO) contact

1 form A (NO) contact

S0418-CB S0418-CN S0418-CA

S0163-BES0163-BCS0163-BG

S0163-BH S0163-BD S0163-BF

*) With the recommended PCB hole sizes a grid

pattern from 2.5 mm to 2.54 mm can be used.

10-2014, Rev. 1014

www.te.com

a TE Connectivity Ltd. company

Datasheets and product speciﬁcation

according to IEC 61810-1 and to be used

only together with the ‘Deﬁnitions’ section.

Datasheets and product data is subject to the

terms of the disclaimer and all chapters of

the ‘Deﬁnitions’ section, available at

http://relays.te.com/definitions

Datasheets, product data, ‘Deﬁnitions’ sec-

tion, application notes and all speciﬁcations

are subject to change.

SCHRACK

General Purpose Relays

PCB Relays

Power PCB Relay RT1 (Continued)

Product code structure Typical product code RT 3 1 4 024

Type

RT Power PCB Relay RT1

Version

1 12A, pinning 3.5mm, ﬂux proof

2 12A, pinning 5mm, ﬂux proof *)

3 16A, pinning 5mm, ﬂux proof

B 12A, pinning 3.5mm, wash tight

D 16A, pinning 5mm, wash tight

Contact arrangement

1 1 form C (CO) contact

3 1 form A (NO) contact

Contact material

4 AgNi 90/10

5 AgNi 90/10 gold plated (for type RT31.)

Coil

Coil code: please refer to coil versions table

Version

Blank Standard version

WG Product in accordance with IEC 60335-1 (domestic appliances)

R Reﬂow solderable

*) Wash tight version on request

Dimensions

S0272-BB

Process conditions for Reﬂow soldering

according to EN61760-1

THT version THR version (reﬂow solderable)

S0272-BRB

10-2014, Rev. 1014

www.te.com

a TE Connectivity Ltd. company

Datasheets and product speciﬁcation

according to IEC 61810-1 and to be used

only together with the ‘Deﬁnitions’ section.

Datasheets and product data is subject to the

terms of the disclaimer and all chapters of

the ‘Deﬁnitions’ section, available at

http://relays.te.com/definitions

Datasheets, product data, ‘Deﬁnitions’ sec-

tion, application notes and all speciﬁcations

are subject to change.

SCHRACK

General Purpose Relays

PCB Relays

Power PCB Relay RT1 (Continued)

Product code Version Contacts Contact material Coil Version Part number

RT114009 12A, pinning 3.5mm, 1 form C (CO) AgNi 90/10 9VDC Standard 1393239-9

RT114012 ﬂux proof contact 12VDC 1419108-1

RT114012WG IEC60335-1 compliant 7-1415538-6

RT114024 24VDC Standard 1-1393239-3

RT114024WG IEC60335-1 compliant 1415539-4

RT114730 230VAC Standard 1-1393239-9

RT115024 AgNi 90/10 gold pl. 24VDC 2-1393239-1

RT134012 1 form A (NO) AgNi 90/10 12VDC 2-1393239-6

RT134024 contact 24VDC 3-1393239-0

RT214012 12A, pinning 5mm, 1 form C (CO) 12VDC 5-1393239-4

RT214024 ﬂux proof contact 24VDC 5-1393239-5

RT214524 24VAC 5-1393239-9

RT214730 230VAC 1419108-6

RT314005 16A, pinning 5mm, 5VDC 9-1393239-1

RT314006 ﬂux proof 6VDC 9-1393239-3

RT314012 12VDC 9-1393239-5

RT314012WG IEC60335-1 compliant 8-1415535-6

RT314024 24VDC Standard 9-1393239-8

RT314024WG IEC60335-1 compliant 1415538-7

RT314048 48VDC Standard 1393240-1

RT314730 230VAC 1393240-7

RT315024 AgNi 90/10 gold pl. 24VDC 1-1393240-4

RT334009WG 1 form A (NO) AgNi 90/10 9VDC IEC60335-1 compliant 3-1415538-1

RT334012 contact 12VDC Standard 4-1393240-5

RT334012WG IEC60335-1 compliant 1-1415527-1

RT334024 24VDC Standard 4-1393240-8

RT334048 48VDC 5-1393240-0

RTB14005 12A, pinning 3.5mm, 1 form C (CO) 5VDC 1-1393238-2

RTB14012 wash tight contact 12VDC 1-1393238-5

RTB14024 24VDC 1-1393238-9

RTB14524 24VAC 2-1393238-4

RTD14005 16A, pinning 5mm, 5VDC 5-1393238-9

RTD14012 wash tight 12VDC 6-1393238-2

RTD14024 24VDC 6-1393238-8

RTD14048 48VAC 6-1393238-9

RTD34012 1 form A (NO) 12VDC 3-1419108-5

RTD34024 contact 24VDC 3-1419108-8

This list represents the most common types and does not show all variants covered by this datasheet.

Other types on request