If you need detailed product information, or help choosing the right
product for your application, see our Interactive Catalog. Use the
Interactive Catalog to access the most complete and up-to-date
information available.
The Interactive Catalog provides an extensive collection of product
specifications, application data, and technical literature that can be
searched based on criteria you select.
This PDF catalog information was published in November 2000.
Sensing and Control
Honeywell Inc.
11 West Spring Street
Freeport, IL 61032
www.honeywell.com/sensing
Sensing and Control
Interactive
Catalog...
Click this icon to try
the Interactive Catalog.
Interactive Catalog Supplements Catalog PDFs
Manual Switches AML Series
Advanced Manual Line
8 Honeywell1SensingandControl11-800-537-6945USA1F1-815-235-6847International11-800-737-3360Canada
Solid state switches AML10 series
AML11/12pushbuttonswitches..........................................12/13
Electronic control switches AML20 series
AML21/22pushbuttonswitches.........................................14/15
AML23/25paddleswitches.............................................16/17
AML24/26rockerswitches..............................................18/19
AML27keylockswitches..................................................20
Power duty switches AML30 series
AML31/32pushbuttonswitches............................................21
AML33/35paddleswitches................................................22
AML34/36rockerswitches.................................................23
Indicators, Annunciators AML40 series
AML41/42indicators......................................................24
AML45annunciators......................................................25
Buttons, rockers, covers, cap assemblies AML50 series
AML59annunciatorcapassemblies........................................28
AML51/52pushbuttonswitchandindicatorbuttons........................30/31
AML53/55paddleswitchcovers.........................................35/36
AML54/56rockerswitchoperators.......................................30/40
Mounting hardware AML60 series
AML61mountingbracketassembly.........................................43
Accessories AML70 series
AML71barriersandAML75panelseals.....................................44
AML76switchguardsandAML78panelplugs,dummyhousing................45
AML79connectorblock...................................................45
Lamps and LEDs AML90 series
AML91incandescentwedgebaseT-134lampsandAML92T-134LEDs...........46
Mountingdimensions....................................................47
Manual Switches AML Series
Advanced Manual Line
Honeywell1SensingandControl11-800-537-6945USA1F1-815-235-6847International11-800-737-3360Canada9
IN FRONT OF THE PANEL
Coordinated, attractive appearance.
AMLfeaturesinnovationsdesignedbyin-
dustrialdesignerstoachievethebestbal-
ance of human factors and aesthetic ap-
pearance. Operator height, bezel size,
and the compatibility of square and rect-
angular shapes blend with other compo-
nents to harmonize your panel. There’s
no visual clutter to distract from man/
machine communication.
This comprehensive line of lighted and
unlighted manual controls features:
1Pushbuttons for high and
intermediate frequency functions;
1Rocker and paddle switches, with 2 or
3 positions, for less frequent control
functions;
1Plus lighted indicators and
annunciators which complement
AML’s universal appeal.
Various controls can be matched with
their functions to accommodate the most
natural and efficient habit pattern reflex.
Keylock operated switches can be used
to assure ‘‘authorized personnel only’’
access.
Displayflexibility.AMLoffersachoiceof
five legend sizes, four button heights, full
or split section display, and illumination
by incandescent lamps, LED’s or neons.
Colorsarebrightanduniform,providinga
strongdefinitionandgoodvisibility.(Non-
illuminateddeviceshavethesameattrac-
tive colors.)
Color display options include:
1Transmitted color color can be
distinguished whether lamp is On or
Off.
1Dead front display appears black,
until illumination causes legend and
color to appear.
1Projected color white display is
diffused with color when illuminated.
BEHIND THE PANEL
AML’s simple, cost effective design pro-
vides many behind-panel benefits for the
designer and installer/user.
Simple to install. They snap in from the
panel front individually or in vertical or
horizontalstrips; or insubpanel mounted
strips and matrices that can be pre-as-
sembled and pre-wired to assure accu-
rate alignment and efficient panel build-
ing.
Electricalflexibility. Solidstateswitches
with Hall effect integrated circuits
interface directly with microprocessors
and other logic level devices. These IC’s
werefirstappliedinMICROSWITCHsolid
state keyboards. Today, many MICRO
SWITCH products incorporate the Hall
effecttechnologytomeet a wide range of
position sensing and manual control
needs.
Electronic control switches with gold or
silver contacts, and 1, 2, or 4 poles, will
handleupto3amps.Includinganencod-
ed version which generates different bi-
nary coded outputs merely by changing
cam-keyed buttons.
Power duty switches meet line discon-
nectapplicationneedswith10-amppush-
buttons and 15-amp paddle and rocker
switches.
Easy to wire. All AML devices present
single level termination. This means fas-
ter, easier, neater, and more economical
wiring. And there is a choice of solder,
quick-connect, push-on, and printed cir-
cuit termination.
MATING RECEPTACLES
The .110 ×.020quick-connect/solderter-
minal (types 2 and 8) is designed for use
with receptacles that comply with the UL
standard for insertion and withdrawal
forces.Maximum insertion force is12lbs.
max., withdrawal force is 14 lbs. These
receptacles are supplied by: AMP Inc.,
Berg, Augat, Hollingsworth, MALCO,
Zierick,andothers.RefertoThomasReg-
ister or the Yellow Pages for the location
of your local supplier.
Manuals
Manual Switches AML Series
Advanced Manual Line
10Honeywell1SensingandControl11-800-537-6945USA1F1-815-235-6847International11-800-737-3360Canada
FEATURES
1Complete selection of pushbutton,
rocker and paddle (toggle type)
switches accommodates different
functions and promotes operator
efficiency.
1Solid state, electronic, and power
duty control.
1Full or split screen incandescent
display switches and indicators
provide vivid transmitted color,
projected color (for neutral display
when unlit), and dead front (hidden
color).
1Wide-angle visibility LED and line
voltage neon display switches and
indicators.
1Annunciators back-lighted by LED’s
enable high density message display.
1Keylock switches available for
controlled access applications.
1All AML terminations at the same
shallow depth (1.7 in. /43,1mm) for
convenient wiring or PC board
termination.
1Snap-in surface mount or sub-panel
(hidden bezel) mount with mounting
hardware.
1Pad printed legends with a clear
polyurethane overcoat available in a
choice of five standard sizes.
1Metric design for worldwide accept-
ance.
1UL recognized, CSA certification.
1Selected listings are certified by VDE
and CE. (For compliance status,
contact the 800 number.)
MICRO SWITCH AML Advanced Manual
Line combines functional flexibility with
electrical versatility to provide a broad
range of options to choose from.
EASY TO RELAMP
Relamping of T-1-3/4 incandescent
AML91 lamps is accomplished from the
front of the panel without tools. (AML92
T-1-3/4 LEDs can be added in the same
manner.)
FULL GUARD BEZEL OPTION
As an alternative to standard height be-
zels (.06 in./1,5 mm), pushbutton switch-
escanbefurnishedwithfullguardbezels
extending .19 in./5.0 mm from the mount-
ing surface. In the free position, standard
buttons are flush with full guard bezels.
Theraised bezelguardsagainstacciden-
taloperationbysomeoneleaningagainst
or dropping something on a control con-
sole.
High Intensity LEDs For Full-face AML Lighted Display
AML92 Series
1Full-face illumination for high visibility lighted colors.
1Advanced illumination technology combines high-intensity LED in standard
T-1-3/4 wedge base lamp package.
1Easy plug-in installation in AML lighted switches and indicators.
1Low operating temperature permits high density, continuous operation with
minimal heat build-up.
AML92 Series LEDs have a quad chip assembled in a T-1-3/4 wedge base lamp
package.Theyprovidefull-faceilluminationwhenusedwithlightedpushbutton,
rocker and paddle switches, or indicators equipped with incandescent lamp
sockets.Fororderinginformation,refertopage46.
Manual Switches AML Series
Advanced Manual Line
Honeywell1SensingandControl11-800-537-6945USA1F1-815-235-6847International11-800-737-3360Canada11
AML CHARACTERISTICS AML 10 Series AML 20 Series AML 30 Series AML 40 Series
Electrical/Mechnical Life* N/A
Pushbuttons–Momentary 1,000,000 25,000 (silver)/
100,000 (gold) 25,000 ---
Pushbuttons–Alternate 25,000 25,000 25,000 ---
Rockers 25,000 25,000 25,000 ---
Paddles 25,000 25,000 25,000 ---
Agency Ratings
(May not apply to every
series division)
UL File E53576 File E12252 File E12252 File E58932
CSA File LR4442 File LR4442 File LR4442 File LR4442
VDE None File 0630/10.78+File 0630/10.78++ None
CE Rating 1710 Rating 1710
No. 4275.5788 No. 4275.5788
*95% Survival
+Exception: Four-Pole AML’s are not included in VDE Approval
++ Exception: Only the 2-pole AML33 and AML34 are certified by VDE
AML ELECTRICAL DATA
1AML10 Series
Electrical Characteristics Absolute Maximum Rating4
Switching Time
Max.
Output
Leakage Voltage
Integrated Supply Output Current Rise Fall Supply Externally Loads
Circuit Current Voltage max. 10% to 90% to Voltage Applied to to Storage
Function (Max.) (Operated) (Released) 90% 10% (VS) Output Output Temperature
4.5-24 VDC
Sinking 5V
7.0 mA
(Released)
24 V
9.0 mA
(Released)
14.0 mA
(Operated-
no load)
+.4 Volt
(Sinking
10 mA)
10 µA 1.5 µsec
(Sinking
10 mA)
0.5 µsec
(Sinking
10 mA)
–30 to +30
VDC –0.5 Volt min. +24
Volts max. (Off
condition)
20 mA
(Sinking) –40Cto
+65°C (–40°
to +149°F)
1Over temperature range of 0°to +55°C(+32°to 2Over temperature range of 0°to +55°C(+32°to 4As with all solid state components, performance can be
+131°F) and supply voltage of 4.5 to 5.5 VDC. +131°F) and supply voltage of 16 VDC. expected to deteriorate as rating limits are approached;
however, they will not be damaged unless the limits are
exceeded.
3At 24°C. (+75°F)
1AML20 Series
Contacts Voltage Current Load Type
Silver 250 VAC 2 Amps 75% Power Factor
or 125 VAC 3 Amps 75% Power Factor
Gold-plated Silver 24 VDC 2 Amps Resistive
Gold 125 VAC/DC 100 mA Resistive
1AML30 Series
Current
Voltage Pushbuttons Rockers or Paddles Load Type
125 VAC 10 amps 15 amps 60% power factor
250 VAC 10 amps 15 amps 60% power factor
Manuals
Manual Switches AML11 Series
Solid State Pushbutton
12Honeywell1SensingandControl11-800-537-6945USA1F1-815-235-6847International11-800-737-3360Canada
INCANDESCENT OR NON-LIGHTED DISPLAY
Buttons ordered separately.
ElectricalDatapage11
Buttonspage30
LampsandLEDspage46
Accessoriespages44/45
MountingDimensionspages47/48
FEATURES
1Hall effect reliability.
1Provides low voltage signals that
interface with nearly all DC logic level
loads.
14.5-24VDC
supply voltage.
1Fullguardbezeloption.
1Lamps can be furnished installed or
ordered separately.
1UL recognized.
1Lamp circuit independent of switch
circuit.
AML11 ORDER GUIDE
AML11 B B A 2 EA
Housing
Type
Standard Bezel:
AML11B Square Non-Lighted
AML11C Square 1 Lamp Ckt.
AML11E Rect. Non-Lighted
AML11F Rect. 1 Lamp Ckt.
AML11G Rect. 2 Lamp Ckts.
Full Guard Bezel:
AML11H Square Non-Lighted
AML11J Square 1 Lamp Ckt.
AML11K Rect. Non-Lighted
AML11L Rect. 1 Lamp Ckt.
AML11M Rect. 2 Lamp Ckts.
Bezel
Color
B
Black
Incandescent
Lamp Type
A
No Lamp
Installed
B
6 V Lamp*
C
14 V Lamp*
E
28 V Lamp*
Terminal
Type
2
.110 ×.020
(Solder or
Quick-Connect)
3
.025 H.025
(Printed
Circuit, or
Push-On)
Circuitry
Codes
4.5-24
VDC
Sinking
EA
Momentary
Action
EE
Alternate
Action
* Lampswillbeinstalledpereachlampcircuitspec-
ified in the Housing Type.
Example:AML11BBA2EA
Squarepushbutton switch housing, non-lighted; blackbezel; .110×.020termination;
momentaryaction;currentsinkingoutputforusewith4.5 voltsupply.
CURRENT SINKING OUTPUT
AML10 SERIES
A permanent magnet plunger moves ad-
jacent to the Hall effect integrated circuit
to give a digital, current sinking normally
high output.
Manual Switches AML12 Series
Solid State Pushbutton
Honeywell1SensingandControl11-800-537-6945USA1F1-815-235-6847International11-800-737-3360Canada13
LED DISPLAY
LED
‘‘
window’’ buttons ordered separately.
LEDs are not replaceable.
FEATURES
1Hall effect reliabilty (Refer to facing
page for electrical specifications.)
1Rectangular, high efficiency LED’s
give flush display area and wide angle
indication.
1Available with or without diode
protection for the LED’s.
14.5 thru24VDCdeviceshavean
internal resistor to maintain LED
current at nominal 20 mA.
ElectricalDatapage11
Buttonspages30/31
LampsandLEDspage46
Accessoriespages44/45
MountingDimensionspages47/48
1LED circuit independent of switch
circuit.
1UL recognized.
AML12 ORDER GUIDE
AML12C B B 2 EA
Housing Type
Standard Bezel:
AML12C Square 1 LED
Full Guard Bezel:
AML12J Square 1 LED
Bezel
Color
B
Black
LED Color/
Voltage
Red
BV*
C5V
D10 V
E15 V
F24 V
Yellow
HV*
J5V
K10 V
L15 V
M24 V
Green
RV*
S5V
T10 V
W15 V
X24 V
Terminal Type/
Diode Protection
2
.110 ×.020
(Solder or
Quick-Connect)
3
.025 ×.025
(Printed Circuit
or Push-On)
8
.110 ×.020
With Diode
Protection
Circuitry
Codes
4.5-24
VDC
Sinking
EA
Momentary
Action
EE
Alternate
Action
* See LED application information for devices
withoutcurrent-limitingresistor,page46.
Example:AML12CBB2EA
Square pushbutton switch housing;
blackbezel;redLED;.110×.020termina-
tion;currentsinkingoutputforusewith4.5
volt supply; momentary action.
Manuals
Manual Switches AML21 Series
Electronic Control Pushbutton
14Honeywell1SensingandControl11-800-537-6945USA1F1-815-235-6847International11-800-737-3360Canada
INCANDESCENT OR NON-LIGHTED DISPLAY
Buttons ordered separately.
ElectricalDatapage11
Buttonspage30/31
LampsandLEDspage46
Accessoriespages44/45
MountingDimensionspages47/50
FEATURES
11, 2, or 4 poles.
1Silver or gold contacts.
1Full guard bezel option.
1Momentary or 2-level alternate action
(push-on, push-off).
1UL recognized, CSA certified.
1Lamps can be furnished installed or
ordered separately.
1Lamp circuit independent of switch circuit.
**
*AML21 Series: 1 pole and 2-pole
only.
AML21 ORDER GUIDE
AML21 B B A 2 AA
Housing Bezel Incandescent Terminal Circuitry Codes
Type Color Lamp Type Type (Each pole has double-throw)
Standard Bezel: B A 2 Silver Mom. Action
AML21B Square Non-Lighted
AML21C Square 1 Lamp Ckt.
AML21E Rect. Non-Lighted
AML21F Rect. 1 Lamp Ckt.
AML21G Rect. 2 Lamp Ckts.
Full Guard Bezel:
AML21H Square Non-Lighted
AML21J Square 1 Lamp Ckt.
AML21K Rect. Non-Lighted
AML21L Rect. 1 Lamp Ckt.
AML21M Rect. 2 Lamp Ckts.
Black No Lamp
Installed
B
6 V Lamp*
C
14 V Lamp*
E
28 V Lamp*
.110 ×.020
(Solder or
Quick-Connect)
3
.025 ×.025
(Printed Ckt. or
Push-On)
Contacts AA 1-Pole
AC 2-Pole
CC 4-Pole
Alt. Action
AB 1-Pole
AD 2-Pole
CD 4-Pole
Gold
Contacts Mom. Action
BA 1-Pole
BC 2-Pole
DC 4-Pole
Alt. Action
BB 1-Pole
BD 2-Pole
DD 4-Pole
Gold-Plated
Silver
Contacts
Mom. Action
EA 1-Pole
EC 2-Pole
Alt. Action
EB 1-Pole
ED 2-Pole
* Lamps will be installed per each lamp circuit specified in the Housing Type.
Example: AML21BBA2AA
Square pushbutton switch housing non-
lighted; black bezel; .110 ×.020 termina-
tion; momentary action; 1-pole, double-
throw; silver contacts.
Manual Switches AML22 Series
Electronic Control Pushbutton
Honeywell1SensingandControl11-800-537-6945USA1F1-815-235-6847International11-800-737-3360Canada15
LED DISPLAY
Buttons with LED
‘‘
window’’ ordered separately.
LEDs are not replaceable.
FEATURES
1Identical to AML21switches, except
furnished with high efficiency LED
display.
1Rectangular LED’s are flush with
button surface, providing wide angle
indication.
1Optional diode protection for LED’s.
15 thru 24 VDC LED devices have an
internal resistor to maintain current at
nominal 20 mA.
1UL recognized, CSA certified.
1LED circuit independent of switch
circuit.
ElectricalDatapage11
Buttonspages30/31
LampsandLEDspage46
Accessoriespages44/45
MountingDimensionspages47/50
**
*AML22 Series: 1 pole and
2-pole only.
AML22 ORDER GUIDE
AML22 C B B 2 AA
Housing Bezel LED Color/ Terminal Circuitry Codes
Type Color Voltage Type (Each pole has double-throw)
Standard Bezel: B Red 2 Silver Mom. Action
AML22C Square 1 LED
AML22H Square 1 High-
Profile LED (For use with
AML52-A buttons)
Full Guard Bezel:
AML22J Square 1 LED
Black BV*
C5V
D10V
E15V
F24V
Yellow
HV*
J5V
K10V
L15V
M24V
Green
RV*
S5V
T10V
W15V
X24V
.110 ×.020
(Solder or
Quick-Connect)
3
.025 ×.025
(Printed Ckt.,
or Push-On)
8
.110 ×.020
With Diode
Protection
for LED
Contacts AA 1-Pole
AC 2-Pole
CC 4-Pole
Alt. Action
AB 1-Pole
AD 2-Pole
CD 4-Pole
Gold
Contacts Mom. Action
BA 1-Pole
BC 2-Pole
DC 4-Pole
Alt. Action
BB 1-Pole
BD 2-Pole
DD 4-Pole
Gold-Plated
Silver
Contacts
Mom. Action
EA 1-Pole
EC 2-Pole
Alt. Action
EB 1-Pole
ED 2-Pole
*SeeLEDinformationfordeviceswithoutcurrentlimitingresistor,page46.
Example: AML22CBB2AA
Square pushbutton switch housing with
one LED, black bezel; red LED (without
resistor); .110 ×.020 termination; mo-
mentary action,1-pole, double-throw; sil-
ver contacts.
CONTACT ARRANGEMENT
1, 2 or 4 poles: Form C
Manuals
Manual Switches AML23 Series
Electronic Control Paddle
16Honeywell1SensingandControl11-800-537-6945USA1F1-815-235-6847International11-800-737-3360Canada
INCANDESCENT OR NON-LIGHTED DISPLAY
Covers ordered separately.
FEATURES
1Silver or gold contacts.
11, 2 or 4 poles.
1Toggle type paddle operators
permanently installed in rectangular
housings.
1Covers for the switch housing may be
lighted or unlighted.
1UL recognized, CSA certified.
1Lamps can be furnished installed or
ordered separately.
1Lamp circuit independent of switch
circuit.
ElectricalDatapage11
PaddleCoverspage35
LampsandLEDspage46
Accessoriespage45
MountingDimensionspages47/50
**
*AML23 Series: 1 pole and
2-pole only.
*AML23 ORDER GUIDE
AML23 E B A 2 AA 01
Housing Operator/Bezel Incandescent Terminal Circuitry Operating
Type Color Lamp Type Type Codes Action
AML23 E B A 2 Insert Code
letters as
shown in
Circuitry Chart
Insert Code numbers
from Operating
Action Chart
Rectangular Black/Black No Lamp
Installed
B
6 V Lamp*
C
14 V Lamp*
E
28 V Lamp*
.110 ×.020
(Solder or
Quick-Connect)
3
.025 ×.025
(Printed Ckt.,
or Push-on)
Non-Lighted
AML23 F
Rectangular
1 Lamp Ckt. (A)
AML23 G
Rectangular
2 Lamp Ckts.
(A&B)
* Lamps will be installed per each lamp circuit specified in the Housing Type.
1The ‘‘MICRO SWITCH’’
identification is shown
on this side of the
switch housings.
Example: AML23EBA2AA01
Rectangular non-lighted paddle switch
housing; black paddle and bezel; .110 ×
.020 terminals; with one circuit ON and
one circuit OFF in each extreme operator
position (maintained).
CIRCUITRY
Silver Gold 2-Position 3-Position
Contacts Contacts
AA BA
AC BC
(Non-illuminated
switches only)
CA DA
CC DC
(Non-illuminated
switches only)
OPERATING ACTION
2-Position:
01
Maint. None Maint.
02
Mom. None Maint.
03
Maint. None Mom.
3-Position:
04
Maint. Maint. Maint.
05
Mom. Maint. Mom.
06
Maint. Maint. Mom.
07
Mom. Maint. Maint.
Manual Switches AML25 Series
Electronic Control Paddle
Honeywell1SensingandControl11-800-537-6945USA1F1-815-235-6847International11-800-737-3360Canada17
LED DISPLAY
Covers with LED
‘‘
window’’ ordered separately.
FEATURES
1Identical to AML23, except furnished
with one or two rectangular high
efficiency LED’s which give flush
display area and wide angle
indication.
1Available with or without diode
protection for LED’s.
1LED circuit independent of switch
circuit.
ElectricalDatapage11
PaddleCoverspage36
LampsandLEDspage46
Accessoriespage45
MountingDimensionspages47/50
15 thru 24 VDC devices have internal
resistor to maintain current at nominal
20 mA.
1UL recognized, CSA certified.
**
*AML25 Series: 1 pole and
2-pole only.
AML25 ORDER GUIDE
AML25 F B B 2 AA 01 R X
Housing Operator/ LED Terminal Type/ Circuitry Operating LED Color LED Color
Type Bezel Color Voltage Diode Protection Codes Code (LED A) (LED B)
AML25 F B B 2 Insert code Insert code RR
Rectangular Black/Black V* .110 ×.020 letters numbers Red Red
1 LED (Solder or Q-C) as shown in from YY
CCircuitry Operating Yellow Yellow
AML25 G 5V 3Chart Action GG
Rectangular .025 ×.025 Chart Green Green
2 LED’s D(Printed Ckt., LED version XX
10 V or Push-On available No LED No LED
only withE8 AA15 V .110 ×.020 BAw/Diode CAF protection DA24 V circuitry
*SeeLEDapplicationinformationfordeviceswithoutcurrent-limitingresistor,page46.
Example: AML25FBB2AA01RX
Rectangular paddle switch; illuminated
with one red LED, this device has a black
paddle and bezel, and .110 ×.020 termi-
nals; with one circuit ON and one circuit
OFF in each extreme operator position
(maintained).
NOTE: For further information on re-
placement LED’s, call the 800 number.
Covers
ordered
separately
1The ‘‘MICRO SWITCH’’ identification is
shown on this side of the switch housings.
Manuals
Manual Switches AML24 Series
Electronic Control Rocker
18Honeywell1SensingandControl11-800-537-6945USA1F1-815-235-6847International11-800-737-3360Canada
INCANDESCENT OR NON-LIGHTED DISPLAY
Rocker operators ordered separately.
FEATURES
1Silver or gold contacts.
12 or 3 position operation.
1UL recognized, CSA certified.
1Lamps can be furnished installed or
ordered separately.
1Lamp circuit independent of switch
circuit.
ElectricalDatapage11
Rockerspage39
Lampspage46
Accessoriespages44/45
MountingDimensionspages47/50
**
*AML24 Series: 1 pole and
2-pole only.
AML24 ORDER GUIDE
AML24 E B A 2 AA 01
Housing Bezel Incandescent Terminal Circuitry Operating
Type Color Lamp Type Type Codes Action
AML24 E B A 2 Insert Code
letters as
shown in
Circuitry Chart
Insert Code numbers
from Operating
Action Chart
Rectangular Black No Lamp
Installed
B
6 V Lamp*
C
14 V Lamp*
E
28 V Lamp*
.110 ×.020
(Solder or
Quick-Connect)
3
.025 ×.025
(Printed Ckt.,
or Push-on)
Non-Lighted
AML24 F
Rectangular
1 Lamp Ckt. (A)
AML24 G
Rectangular
2 Lamp Ckts.
1The ‘‘MICRO SWITCH’’
identification is shown
on this side of the
switch housings.
* Lamps will be installed per each lamp circuit specified in the Housing Type.
Example: AML24EBA2AA01
Rectangular non-lighted rocker switch
housing; black bezel; .110 ×.020 termi-
nals; with one circuit ON and one circuit
OFF in each extreme operator position
(maintained).
CIRCUITRY
Silver Gold 2-Position 3-Position
Contacts Contacts
AA BA
AC BC
(Non-illuminated
switches only)
CA DA
CC DC
(Non-illuminated
switches only)
OPERATING ACTION
2-Position:
01
Maint. None Maint.
02
Mom. None Maint.
03
Maint. None Mom.
3-Position:
04
Maint. Maint. Maint.
05
Mom. Maint. Mom.
06
Maint. Maint. Mom.
07
Mom. Maint. Maint.
Manual Switches AML26 Series
Electronic Control Rocker
Honeywell1SensingandControl11-800-537-6945USA1F1-815-235-6847International11-800-737-3360Canada19
LED DISPLAY
Rocker operators ordered separately.
LEDs are not replaceable.
FEATURES
1Identical to AML24, except furnished
with one or two rectangular high
efficiency LED’s which give flush
display area and wide angle
indication.
1Available with or without diode
protection for LED’s.
1LED circuit independent of switch
circuit.
ElectricalDatapage11
Rockerspage40
LampsandLEDspage46
Accessoriespage45
MountingDimensionspages47/50
15 thru 24 VDC LED devices have
internal resistor to maintain current at
nominal 20 mA.
1UL recognized, CSA certified.
**
*AML26 Series: 1 pole and
2-pole only.
AML26 ORDER GUIDE
AML26 F B B 2 AA 01 R X
Housing LED Terminal Type/ Circuitry Operating LED Color LED Color
Type Bezel Color Voltage Diode Protection Codes Action (LED A) (LED B)
AML26 F B B 2 Insert code Insert code RR
1 LED Black V* .110 ×.020 letters numbers Red Red
(Solder or as shown in from YY
AML26 G C Quick-Connect Circuitry Operating Yellow Yellow
2 LED’s 5 V Chart Action GG
3Chart Green Green
D.025 ×.025 LED version XX
10 V (Printed Ckt., available No LED No LED
or Push-On) only withEAA15 V 8BA.110 ×.020 CAF w/Diode DA24 V for LED circuitryprotection
*SeeLEDapplicationinformationfordeviceswithoutcurrent-limitingresistor,page46.
Example: AML26FBB2AA01RX
Rectangular rocker switch; illuminated
with one LED, this device has a black
bezel, .110 ×.020 terminals; with one
circuit ON and one circuit OFF in each
extreme operator position (maintained).
1The ‘‘MICRO SWITCH’’ identification is
shown on this side of the switch housings.
Rocker
ordered
separately
Manuals
Manual Switches AML27 Series
Electronic Control Keylock
20Honeywell1SensingandControl11-800-537-6945USA1F1-815-235-6847International11-800-737-3360Canada
NON-LIGHTED FEATURES
1Enable control of access to computer
peripherals, keyboards, point-of-sale
terminals, and security systems which
are locked when unattended; and
other locations where tampering must
be discouraged.
12 or 3 positions, maintained
(90°throw) and momentary action
(60°throw).
15-bit key combinations
ElectricalDatapage11
Accessoriespages44/45
MountingDimensionspages47/50
1UL recognized, CSA certified.
1Static discharge protection (up to
20 kV when grounded).
AML27 ORDER GUIDE
AML27 A B K 2 AA 21 BA
Circuitry Codes Operation Action
Housing Bezel Button Terminal (Each pole has (Key out in center position, Key
Type Color Color Type double-throw) except where noted) Combinations
AML27 A B K 2 Silver Contacts: (Two Keys
Black Black .110 ×.020 AA Furnished)
Square (Solder or 1 pole
housingQuick-Connect)ACBABS
2poleBB BT
Non-Lighted3BDBV
.025×.025GoldContacts:BEBW
(PrintedBA
Circuit or 1 pole
Push-On) BC
2 pole
CCW Center CW
21
None Maint. Maint.
22*
None Maint. Maint.
23
None Maint. Mom.
24
Maint. Maint. Maint.
25
Mom. Maint. Mom.
26**
Maint. Maint. Maint.
27***
Mom. Maint. Maint.
28***
Maint. Maint. Maint.
29†
Maint. Maint. Maint.
30†
Maint. Maint. Mom.
31†
Maint. Maint. Mom.
* Key out in both positions.
** Key out in all three positions.
*** Key out in center and CW
positions.
Key out in center and
CCW positions.
†† KeyoutinCCWonly.
REPLACEMENT KEYS
One key per listing.
Key
Com-
bination Key
Code Catalog
Listing
BA 110 30PA101-AML
BB 109 30PA102-AML
BD10730PA104-AML
BE10630PA105-AML
BS117 30PA117-AML
BT118 30PA118-AML
BV11930PA119-AML
BW 12030PA120-AML
Note: These keys fit the 5-bit keylocks in
the Order Guide.
SpecifydifferentKeyCombinationstoac-
quire different keys, i.e.;
AML27ABK2AA21BB and
AML27ABK2AA21BEhavedifferentkeys.
AML27ABK2AA21BB and
AML27ABK3BC25BB have identical inter-
changeable keys.
Example: AML27ABK2AC28BB
Squarehousing;blackbezelandbutton;.110
×.020 terminals; 2-pole double-throw; silver
contacts; 3-position maintained and key
code ‘‘BB’’.
CIRCUITRY
2-Position Switches:
Key Turned
Normal to Right
Position* (CW)
1 Pole
2 Pole
3-Position Switches (Available in 2-pole only.)
Key
Turned
to Left
(CCW) Normal
Position*
Key
Turned to
Right (CW)
2 Pole
* Circuit remains the same with key in or out.
28 and 29 op-
erating actions
should be used
with Key Com-
binationsBA
and BB.
ManualSwitchesAML31/32Series
PowerDutyPushbutton
Honeywell1SensingandControl11-800-537-6945USA1F1-815-235-6847International11-800-737-3360Canada21
INCANDESCENT,NEON,ORNON-LIGHTEDDISPLAY
Buttonsorderedseparately.
ElectricalDatapage11
Buttonspage30
LampsandLEDspage46
Accessoriespages44/45
MountingDimensionspage48
FEATURES
1ULrecognized,CSAcertified.
1AML31lampcircuitindependentof
switchcircuit.
**
*AML31 Series: 2-pole.
*AML32 Series: 2-pole.
CONTACT ARRANGEMENT
2 poles (Form X)
AML31 ORDER GUIDE
AML31accepts one incandescent lamp which can be furnished installed or ordered separately.
AML31 E B A 4 AC
Housing Bezel Incandescent Terminal Circuitry
Type Color Lamp Type Type Codes
Standard Bezel: B A 4 2-Pole, Single-Throw
AML31E Rect. Non-Lighted Black No Lamp Installed .187 ×.020 Normally-Open, Form X:
AML31F Rect. 1 Lamp Ckt. (Solder or
Quick-Connect) AD AC
B
6 V Lamp*
C
14 V Lamp*
E
28 V Lamp*
Alt.
Action Mom.
ActionFull Guard Bezel:
AML31K Rect. Non-Lighted
AML31L Rect. 1Lamp Ckt.
* Lamps will be installed per each lamp circuit specified in the Housing Type.
Example: AML31EBA4AC
Rectangular pushbutton switch housing,
non-lighted; black bezel; .187 ×.020 ter- minals;momentaryaction;2-pole,single-
throw, normally open, Form X.
AML32 ORDER GUIDE
AML32 has neon lamp wired to125 or 250 VAC resistor.
AML32 F B C 7 AC
Housing Bezel Neon Lamp Terminal Type Circuitry
Type Color Voltage/Color Lamp Circuit Codes
Standard Bezel: B Red 4 2-Pole, Single-Throw
Normally-Open, Form X:AML32F Rect. 1 Neon Lamp Black B125 VAC .187 ×.020
C250 VAC (Solder or
Quick-Connect)
with isolated
lamp circuit
7
.187 ×.020
with integral
lamp circuit
AD
Alt.
Action
AC
Mom.
Action
Full Guard Bezel:
AML32L Rect. 1 Neon Lamp Clear
K125 VAC
L250 VAC
Green
M125 VAC
P250 VAC
Example: AML32FBC7AC
Rectangular pushbutton switch housing;
blackbezel;250volt, redneonlamp; .187
×.020 terminals with integral lamp cir-
cuit; momentary action; 2-pole, single-
throw, normally open, Form X.
Isolated neon circuit Integral neon circuit
Manuals
Manual Switches AML33/35 Series
Power Duty Paddle
22Honeywell1SensingandControl11-800-537-6945USA1F1-815-235-6847International11-800-737-3360Canada
INCANDESCENT, NEON, OR NON-LIGHTED DISPLAY
Colored housing covers ordered separately.
CONTACT ARRANGEMENT
1or 2 poles: Form A
ElectricalDatapage11
PaddleCoverspage35
Lampspage46
MountingDimensionspage48
FEATURES
1Toggle type paddle operators
permanently installed in rectangular
housings.
12-position maintained action.
1AML33 lamp circuit independent of
switch circuit.
1UL recognized, CSA certified.
**
*AML33 Series: 2-pole only.
*AML35 Series: 1-pole and
2-pole.
AML33 ORDER GUIDE
AML33 accepts one incandescent lamp which can be furnished installed or ordered separately.
AML33 E B A 4 AA 01
Housing Operator/Bezel Incandescent Terminal Circuitry Operating
Type Color Lamp Type Type Codes Action
AML33 E B A 4 Silver Contacts:
AA
1-Pole
(One Form A
Single-throw,
Normally-Open)
Rectangular Black/Black No Lamp .187 ×.020
(Solder or
Quick-Connect)
Non-Lighted
AML33 F
Rectangular
1 Lamp Ckt.
Installed
B
6 V Lamp*
C
14 V Lamp*
E
28 V Lamp*
AC
2-Pole
(Two Form A)
01
Maint. Maint.
ON OFF
*Lamps will be installed per each lamp circuit specified in the Housing Type.
AML35 ORDER GUIDE
AML35 has neon lamp wired to125 or 250 VAC resistor.
AML35 F B B 4 AA 01
Housing Operator/Bezel Neon Lamp Terminal Type/ Circuitry Operating
Type Color Voltage Lamp Circuit Codes Action
AML35 F
Rectangular
1 Neon Lamp
B
Black/Black Red
B
125 VAC
C
250 VAC
Green
M
125 VAC
P
250 VAC
4
.187 ×.020
(Solder or
Quick-Connect)
With Isolated
Lamp Circuit
7
.187 ×.020
With Integral Lamp
Circuit (Available
with 2-Pole
devices only
Silver Contacts:
AA
(One Form A
Single-Throw)
Available only
with isolated
lamp circuit,
term. type 4.
AC
2-Pole
(Two Form A)
01
Maint. Maint.
ON OFF
1The ‘‘MICRO SWITCH’’ identification is
shown on this side of the switch housing.
Example: AML35FBB4AA01
Rectangular paddle switch housing;
black paddle and bezel; 125 VAC neon
lamp; .187 ×.020 terminals with isolated
lampcircuit;1-PoleFormASingle-Throw;
with circuit ON in one extreme position
and OFF in the other (maintained).
Manual Switches AML34/36 Series
Power Duty Rocker
Honeywell1SensingandControl11-800-537-6945USA1F1-815-235-6847International11-800-737-3360Canada23
INCANDESCENT, NEON, OR NON-LIGHTED DISPLAY
Rocker operators ordered separately. ElectricalDatapage11
Rockerspage39
Lampspage46
MountingDimensionspage48
FEATURES
1Same circuitry, and electrical rating as
power duty paddle switches.
1Neon lamp circuitry can be isolated or
integral on 2-pole switches; isolated-
only on1-pole switches (see
schematics).
1UL recognized, CSA certified.
1AML34 lamp circuit independent of
switch circuit.
**
AML34 Series: 2-pole only.
AML36 Series: 1-pole and
2-pole.
AML34 ORDER GUIDE
AML34 accepts one incandescent lamp which can be furnished installed or ordered separately.
AML34 E B A 4 AA 01
Housing Bezel Incandescent Terminal Circuitry Operating
Type Color Lamp Type Type Codes Action
AML34 E B A 4 Silver Contacts:
AA
1-Pole
(One Form A
Single-Throw)
Rectangular Black No Lamp .187 ×.020
(Solder or
Quick-Connect)
Non. Illum.
AML34 F
Rectangular
1 Lamp Ckt.
Installed
B
6 V Lamp*
C
14 V Lamp*
E
28 V Lamp*
AC
2-Pole
(Two Form A)
01
Maint. Maint.
ON OFF
*Lamps will be installed per each lamp circuit specified in the Housing Type.
AML36 ORDER GUIDE
AML36 has neon lamp wired to125 or 250 VAC resistor.
AML36 F B B 4 AA 01
Housing Bezel Neon Lamp Terminal Type/ Circuitry Operating
Type Color Voltage Lamp Circuit Codes Action
AML36 F
Rectangular
1 Neon Lamp
B
Black Red
B
125 VAC
C
250 VAC
Green
M
125 VAC
P
250 VAC
4
.187 ×.020
(Solder or
Quick-Connect)
With Isolated
Lamp Circuit
7
.187 ×.020
(Solder or
Quick-Connect)
With Integral Lamp
Circuit
Silver Contacts:
AA
(One Form A
Single-Throw)
Not available with
terminal type 7
AC
2-Pole
(Two Form A)
01
Maint. Maint.
ON OFF
1The ‘‘MICRO SWITCH’’ identification is
shown on this side of the switch housing.
Example: AML36FBB4AA01
Rectangularrockerswitchhousing;black
bezel; 125 VAC neon lamp; .187 ×.020
terminals with isolated lamp circuit; 1-
Pole Form A single-throw; with circuit ON
in one extreme position and OFF in the
other.
Manuals
Manual Switches AML41/42 Series
Lighted Indicators
24Honeywell1SensingandControl11-800-537-6945USA1F1-815-235-6847International11-800-737-3360Canada
Toorderlampsseepage46.
FEATURES
1Pushbutton style indicators match
display of standard bezel lighted
switches. Choice of incandescent
or LED illumination.
1Lens style indicators use a special
cap-like button which covers the
bezel to present a larger display area,
without affecting family appearance.
Up to 3-lamp split screen capability.
Incandescent illumination.
AML41 AML41
(Use AML51 push- (Use AML51-J/-K/-L
buttonsonly.lensbuttonsonly.
Page30.)Page30.)
AML41 INCANDESCENT DISPLAY INDICATORS ORDER GUIDE
AML41 C B A 2
Housing Type Incand.
Pushbutton Lens Bezel Lamp Terminal
Style: Style: Color Type Type
AML41 C AML41 J B A 2
Square
1 lamp ckt.
AML41 D
Square
2 lamp ckts.
AML41 F
Rectangular
1 lamp ckt.
AML41 G
Rectangular
2 lamp ckts.
Rectangular
1 lamp ckt.
AML41 K
Rectangular
2 lamp ckts.
AML41 L
Rectangular
3 lamp ckts.
Black No lamp
installed
B
6 V Lamp*
C
14 V Lamp*
E
28 V Lamp*
.110 ×.020
(Solder or Quick-
Connect)
3
.025 ×.025
(Printed
Circuit
or Push-On)
* Lamps will be installed per each lamp circuit specified in the Housing Type.
Examples:
AML41CBA2
Square (pushbutton style) indicator
housing with one lamp circuit; black be-
zel; .110 ×.020 termination.
AML41JBA2
Rectangular (lens style) indicator hous-
ingwithonelampcircuit;blackbezel;.110
×.020 termination.
AML42C AML42S
(Use AML52-C/-A
pushbuttons only.
Page31.)
AML42 LED DISPLAY INDICATORS ORDER GUIDE
LEDs are not replaceable.
AML42 S B C 2
Housing Bezel LED Color/ Terminal Type/
Type Color Voltage Diode Protection
AML42 C B Red 2 8
Square Black BV* .110 ×.020 .110 ×.020
1 LED C5 V (Solder or Q.C.) w/diode to
D10 V protect LED
AML42 S E 15 V 3
Compact F24 V .025 ×.025 9
1 LED Yellow Green (Printed Circuit .025 ×.025
HV* RV* or Push-On) w/diode to
J5V S5 V protect LED
K10 V T10 V
L15 V W15 V
M24 V X24 V *SeeLEDapplicationdata,page46,forthese
devices without current-limiting resistor.
Example: AML42SBC2
Compactindicatorwithblackbezel;5volt
red LED; .110 ×.020 termination.
Manual Switches AML45/59 Series
Solid State LED Annunciators
Honeywell1SensingandControl11-800-537-6945USA1F1-815-235-6847International11-800-737-3360Canada25
FEATURES
1Messages are backlighted with LED’s
for long, reliable operating life.
Reduces service and maintenance
costs.
1Low voltage and current (without
inrush), enables direct drive with
integrated circuits. Reduces cost of
interface components (and
installation), and power supply.
1Low operating temperature allows
high-density, continuous operation.
Minimal heat build-up.
1Inherently rugged. Resists effects of
shock and vibration (no filaments to
break).
1High density message display.
Illuminates up to four legend sectors
in color, in a 0.8 ×1.2 inch area.
1Dead front hides legends until
illuminated. Non-glare display with no
flickering.
1UL recognized.
AML45/59 solid state LED annunciators
are a state-of-the-art advancement over
traditional back-lighted legend displays
which utilize incandescent lamps. The
LED light source imparts the benefits of
solidstatelong-lifeandreliability,withlow
power requirements. Operating life is
measured by years, instead of hours.
The AML45 housing has two high effi-
ciencyLED’s which illuminate color filters
and film legends located in the snap-on
AML59capassembly.Thereisachoiceof
full face one-color and split one-color or
two-colordisplays. Coloroptionsarered,
green, and yellow.
Film legends offer a choice of negative or
positive formats. (Note: human factors
engineers generally favor negative an-
nunciator messages, reserving the posi-
tive format for use if special attention is
necessary, such as ‘‘PAPER JAM.’’)
When unlighted, the legend is hidden
(dead front).
NEGATIVE
When illuminated, colored legend ap-
pear1001s against a black background.
NEGATIVE
POSITIVE
When illuminated, black legend appears
against a colored background.
POSITIVE
This annunciator is totally compatible
withother deivces in the MICRO SWITCH
AML Advanced Manual Line both in front
of,andbehindthepanel.Twoofthemfitin
the same space as a rectangular AML
indicators or switch. All terminals exit at
AML’sstandard1.7-inch depth for conve-
nient, single-level wiring.
Manuals
Manual Switches AML45/59 Series
Solid State LED Annunciators
26Honeywell1SensingandControl11-800-537-6945USA1F1-815-235-6847International11-800-737-3360Canada
AML45 LED HOUSINGS
LEDs should be specified as the same
color if a full or split screen one-color
display is desired (RR =red); or different
colors for a split screen two-color display
(RY =red/yellow). (Baffle plate inside
housing prevents light spillage from one
LED color section to the other on split
screen versions.)
LED colors should match filter colors
specified in AML59 cap assembly (see
page28).
Spring clips on sides of the housing hold
units securely in panel. For mounting
stripsoftwoor moreunits,AML61mount-
inghardwaremaybeused(seepage43).
LED APPLICATION INFORMATION
Refertopage47.PANELORIENTATION
Drawing(above)indicatesSide1and
Side2LEDlocations,withMICRO
SWITCHidentificationsfacingUP.Con-
siderthisorientationwhenorderingan
AML45ShousingwithtwodifferentLED
colors,suchasRG(red/Side1,green/
Side 2). Since LED’s are permanently in-
stalled, color location is specially impor-
tanttonotewhenthedeviceistobetermi-
nated in a printed circuit board.
AML45 ORDER GUIDE
AML45 S W A 2 RY
LED Color
Housing Color of LED Terminal
Type Housing Bezel Voltage* Type Side 1 Side 2
AML45 R
2 LED’s
(For use with
Full Screen)
AML45 S
2 LED’s
(For use with
Split Screen)
W
White
K
Black
A
2.4 V
B
5V
C
10 V
D
15 V
F
24 V
2
.110 ×.020
(Solder or
Quick-Connect)
3
.025 ×.025
(Printed Circuit)
8
.110 ×.020
with diode protection
for LED’s
R
Red
Y
Yellow
G
Green
R
Red
Y
Yellow
G
Green
Example: AML45SWA2RY
Split screen type housing with white bezel,
2.4 V LED’s, .110 ×.020 termination, red
LED in Side1 and yellow LED in Side 2.
* Current draw is 20 mA.
‘‘
B’’,
‘‘
C’’,
‘‘
D’’ and
‘‘
F’’ have built-in
current limiting resistors.
Manual Switches AML45/59 Series
Solid State Annunciators
Honeywell1SensingandControl11-800-537-6945USA1F1-815-235-6847International11-800-737-3360Canada27
SUBPANEL MOUNTING
Order AML45/59 annunciators and
AML61mounting hardware separately.
AML61 mounting hardware may be used
for mounting strips of two or more an-
nunciatorsinpairsinasinglecutout.This
method is most cost-effective for multi-
unit application, since it generally takes
lesstimetomakeonelargeholetoaccept
several units than it does to make a hole
for each individual unit. Also, if the front
panel is not required for mounting sup-
port,itcanbemadethinner,andeasierto
cut out, minimizing installed cost.
AML61 strips are factory assembled with
metal cans welded together, and mount-
ingbracketsweldedtotheendcans.Re-
fertopage33 fororderinginformation.
INSTALLATION
Each rectangular AML61 mounting can
will accommodate two annunciators, as
shown in the drawing. Panel appearance
is enhanced if a spacer .05 in./1,3 mm
thick (approx.) is installed between the
housingsattheterminalend.SpecifyCat-
alog Listing 30PA1-AML for a package of
10 spacers.
Mounting centers and panel cutout di-
mensionsareshownonpage52.Anin-
stallationinstructionsheetPK8520is
shippedwitheachorder.
PRINTEDCIRCUITBOARDDIMENSIONS
Suggestedprintedcircuitboardlayoutforup
totenAML45unitsassembledinanAML61
assembly:
3.125Nminimumdiameterholerecommendedtopermit
accesstoannunciator,allowingittobedrivenout
panelfrontshouldreplacementbecomenecessary.
Manuals
Maual Switches AML45/59 Series
Solid State LED Annunciators
28Honeywell1SensingandControl11-800-537-6945USA1F1-815-235-6847International11-800-737-3360Canada
AML59 CAP ASSEMBLIES
Thecapassembly consists of: black cap,
color filter(s), and optional film legend;
furnished unassembled. It snaps onto
housing, flush with the housing bezel.
Filters, assembled with their matte finish
facing the LED’s, efficiently diffuse the
illumination.Theyarecolor-tintedtocom-
plementthered,yellow,andgreenLED’s.
NOTE: Cap assembly should not be sub-
jected to the temperature and chemical
atmosphereassociatedwithwavesolder-
ing. These parts should be installed after
soldering and cleanup.
Catalog listings for AML59 cap assem-
blies are derived from the ordering guide
below.TheorderingguideforAML45LED
housingsisonpage26.
CUSTOM LEGENDS
A 2:1 drawing in black ink is required for
satisfactory reproduction of custom film
legends. As an alternative, you may sub-
mit an office copy of a page from a ty-
pographicsuppliercatalogsuchasChar-
tpak, Letraset, and Zipatone. MICRO
SWITCH can also furnish graphic leg-
ends from the ‘‘Henry Dreyfus Symbol
Source Book.’’ (Custom legends require
a one-time start-up charge.)
1Viewing area inside cap:
XJ1.04 min.; Y J.272 min.
2Customers ordering film legends from
commercial photographic or typeset-
ting sources should specify that the
film be precision cut, per the following
dimensions, to insure proper retention
and alignment on the face of the an-
nunciator: A J.007 max.; B J1.1 ±
.010; C J.300 ±.003.
STANDARD LEGENDS
AML59LegendSheet(seepage30)pro-
vides ordering information for negative
and positive standard film legends in the
type style (14-point Helvetica condensed
bold) shown below. Use separate legend
sheet for each AML59 catalog listing and
attach it (them) to your purchase order.
AML59 ORDER GUIDE
AML59-R K 10 R
Filter Color
Cap Cap Legend
Style Color Type Full Screen Split Screen
AML59-R
Full Screen
AML59-S
Split Screen
K
Black 10
No
Legend
20
Negative
Film
Legend
21
Positive
Film
Legend
R
Red
Y
Yellow
G
Green
R
Red
Y
Yellow
G
Green
R
Red
Y
Yellow
G
Green
Examples:
AML59-RK10R
Full screen style, black cap, no legend,
and red filter.
AML59-SK20RY
Splitscreenstyle,blackcap,negativefilm
legend, red and yellow color filters.
Manual Switches AML59 Series
Legend Sheet
Honeywell1SensingandControl11-800-537-6945USA1F1-815-235-6847International11-800-737-3360Canada29
Manuals
Manual Switches AML51 Series
Buttons/Lens for Switches and Indicators
30Honeywell1SensingandControl11-800-537-6945USA1F1-815-235-6847International11-800-737-3360Canada
AML51 PUSHBUTTON ORDER GUIDE (All possible color combinations may not be available.)
For Incandescent or non-lighted display switches and pushbutton style indicators.
AML51-C 10 R
For AML11, 21, 31 switches and AML41 indicators: Display Full Color or 2nd
Pushbutton Style Legend/Type 1st Color Split Color Split
AML51-C AML51-F AML51-G
AML51-A AML51-H AML51-Nu
AML51-B* AML51-E* AML51-M*
AML51-R*
For AML41D indicators only:
AML51-D
R
Red
Y
Yellow
G
Green
B
Blue
W****
White
K***
Black
L***
Gray
A**
Amber
R
Red
Y
Yellow
G
Green
B
Blue
W****
White
K***
Black
L***
Gray
A**
Amber
Transmitted Color
10 No legend
20 With legend
on cap.
Transmitted Color
(Clear cap and
color insert)
11 No legend
21 With legend
on insert
Dead Front
(Smoky gray cap
and color insert)
30 No legend
40 With legend
on insert
****Projected Color
(White cap and
color insert)
50 No legend
60 With legend
on cap
*Available with transmitted color (10 or 20) only.
****Insert is clear for projected color when
‘‘
W’’ is used.
Example: AML51-C10R
Square full color button; with transmitted color,
no legend; red.
**Available with transmitted color and dead front only.
***Black and gray not recommended for lighted display.
AML51-N buttons not available with Display/Legend Types
10 and 20.
Note: Dimensions include the .060 in bezel.
AML51 LENS ORDER GUIDE (All possible color combinations may not be available.)
For incandescent display AML41J, K, and L lens style indicators only.
AML51-J 10 R
Full Color
Display/Legend or 1st 2nd 3rd
Lens style Type Color Split Color Split Color Split
AML51-J
AML51-K
AML51-L
Transmitted Color R R R
10 No legend Red Red Red
20 With legend YY Y
Transmitted Color Yellow Yellow Yellow
(Clear cap and
color insert) GG G
11 No legend Green Green Green
21 With legend BB B
Dead Front Blue Blue Blue
(Smoky gray cap
and color insert) W**** W**** W****
30 No legend White White White
40 With legend A** A** A**
****Projected Color Amber Amber Amber
(White cap and
color insert)
50 No legend
60 With legend
**Not available with projected color.
****Insert is clear for projected color when
‘‘
W’’ is used.
AML51 lens buttons provide added dis-
play area by snapping onto and covering
the bezel of AML41J, K, and L indicators.
They do not fit other indicators or switch-
es.
Example: AML51-J10R
Rectangular lens type button; full color;
transmitted color, no legend; red.
HOW TO ORDER BUTTON LEGENDS
When specifying legended buttons, sub-
mit a legend order sheet to cover each
listing. To insure proper legend orienta-
tion, AML housings (when viewed from
the panel front) should have the ‘‘MICRO
SWITCH’’ identification facing UP on
square devices and UP or to the LEFT on
rectangular.
Buttonlegendordersheets areshownon
the following pages. Reproduce them on
your office copier.
Legend Sheet Form No.
AML51Pushbuttons FO-63394
AML51Lens buttons FO-63395
AML52 Pushbuttons FO-63504
AML53 Paddle switch covers FO-63567
AML55 Paddle switch covers FO-63565
AML54 Rockers FO-63566
AML56 Rockers FO-63564
Manual Switches AML51/52 Series
Buttons for Switches and Indicators
Honeywell1SensingandControl11-800-537-6945USA1F1-815-235-6847International11-800-737-3360Canada31
AML52 BUTTON ORDER GUIDE (All possible color combinations may not be available.)
For AML12, AML22 (w/o light pipe), AML32, AML42 LED display.
AML52-N 10 R
Button Display/Legend Button
Type Type Color
For LED Devices
AML52-C
AML52-A*
For AML32 Neon Devices
AML52-N
Transmitted Color
10
No Legend
20
With Legend
R
Red
Y
Yellow
G
Green
B
Blue
W
White
K
Black
A
Amber
L
Gray
Examples:
AML52-N10R
Rectangular full screen; for use on neon
power switch with transmitted color, no
legend; red button.
AML52-C10K
Square full screen; for use with LED de-
vice; transmitted color, no legend; black
button.
Manuals
Manual Switches AML52 Series
Pushbutton Legend Sheet
32Honeywell1SensingandControl11-800-537-6945USA1F1-815-235-6847International11-800-737-3360Canada
Manual Switches AML51 Series
Pushbutton Legend Sheet
Honeywell1SensingandControl11-800-537-6945USA1F1-815-235-6847International11-800-737-3360Canada33
Manuals
Manual Switches AML51 Series
Lens Legend Sheet
34Honeywell1SensingandControl11-800-537-6945USA1F1-815-235-6847International11-800-737-3360Canada
Manual Switches AML53/55 Series
Covers for Paddle Switches
Honeywell1SensingandControl11-800-537-6945USA1F1-815-235-6847International11-800-737-3360Canada35
Colored covers simply snap into the top
of paddle switch housings.
COLOR DISPLAY OPTIONS
Transmitted color Color is displayed
whether lamp is On or Off. Choice of
1-piece covers (types 10 or 20) or covers
with clear cap and colored translucent
insert (types11or12).
Deadfronthiddencolor/hiddenlegend
Cover appears black with lamp Off. Leg-
end and color appear when illuminated
(types 30 or 40).
ProjectedcolorTranslucentwhitecov-
er with transparent colored insert (types
50 or 60). White cover appears colored
when illuminated.
AML53 PADDLE SWITCH COVER ORDER GUIDE (All possible color combinations may not be available.)
For AML13, AML23, and AML33 incandescent or non-lighted display.
AML53-T 10 R G
Cover Color
Paddle 12cover, Other side of
Switch Display/Legend or one side of two-piece cover
Cover Type Type two-piece cover (see note)
AML53-E
12Cover
AML53-T
Two-Piece Cover
Transmitted Color R
Red
Y
Yellow
G
Green
B
Blue
***W
White
K*
Black
L*
Gray
A**
Amber
R
Red
Y
Yellow
G
Green
B
Blue
***W
White
K*
Black
L*
Gray
A**
Amber
10 No legend
20 With legend on
cap
Transmitted Color
(Clear cap and
color insert)
11 No legend
21 With legend on
insert
Dead Front
(Smoky gray cap
and color insert)
30 No legend
40 With legend on
insert
***Projected Color
(White cap and
color insert)
50 No legend
60 With legend on
cap
Note:Only one color codeletterisneces-
sary when ordering 12covers.
Example: AML53-T10RG
Two-piece cover; with transmitted color,
no legend; red and green.
*Not for lighted display.
**Not available with projected color.
***Insert is clear for projected color when
‘‘
W’’
is used.
AML55 PADDLE SWITCH COVER ORDER GUIDE (All possible color combinations may not be available.)
For AML35 neon display.
AML55-N 10 R Y
Paddle Switch Display/Legend Lens Cover
Cover Type Type Color Color
AML55-N
Full Neon Cover,
with colored lens
Transmitted Color
10
No Legend
20
With Legend
T
Clear
R
Red
R
Red
Y
Yellow
G
Green
B
Blue
W
White
K
Black
L
Gray
AML55-Ncovershaveacoloredlenticular
lenswindowwhichextendsovertheneon
lamp.
Example: AML55-N10RY
Fullneonpaddle switchcover;withtrans-
mitted color, no legend; red lens and yel-
low cover.
Manuals
Manual Switches AML55 Series
Covers for Paddle Switches
36Honeywell1SensingandControl11-800-537-6945USA1F1-815-235-6847International11-800-737-3360Canada
HOW TO ORDER LEGENDS
FOR PADDLE SWITCH COVERS
Whenspecifyinglegendedpaddleswitch
covers, submit a legend order sheet to
cover each catalog listing. These forms
identifythe maximumnumberoflines per
area and the maximum characters per
line, based on the type size you request.
Toinsureproperlegendorientation,pad-
dle switch housings (when viewed from
the panel front) should have the ‘‘MICRO
SWITCH’’ identification facing UP or to
the LEFT.
Legend order sheets for covers are
shown on the following pages. Repro-
duce them on your office copier or re-
quest a pad of them from the 800 num-
ber:
Legend Sheet Form No.
AML53 Covers FO-63567
AML55 Covers FO-63565
AML55 PADDLE SWITCH COVER ORDER GUIDE (All possible color combinations
may not be available.)
For AML15 and AML25 LED display. See notes below
AML55-T 10 Y R
Cover Color See notes below
Paddle 1/2-cover,
Switch Display/Legend or LED side of Other side of
Cover Type Type two-piece covers* two piece covers
AML55-E
1/2 Cover
(For one LED)*
AML55-T
Two-Piece Cover
(For one LED)
AML55-H
Two-Piece Cover
(For two LED’s)
Transmitted Color
10 No Legend
20 With Legend
RR
Red Red
Y
Yellow
G
Green
B
Blue
W
White
K
Black
L
Gray
Y
Yellow
G
Green
B
Blue
W
White
K
Black
L
Gray
AML55-E,-T,and-Hcovershaveanopen
window which allows LED’s to be flush
with the cover surface.
* Notes:
1Only one color code letter is necessary
for AML55-E1/2 covers.
2To order a 1/2-cover without the LED
‘‘window,’’ specify an AML53-E listing
from the previous page.
Example: AML55-T10YR
Two-piececover;withLEDwindowinone
side,transmittedcolor,nolegend;yellow
(LED side) and red (non-LED side).
Manual Switches AML53 Series
Paddle Operator (Cover) Legend Sheet
Honeywell1SensingandControl11-800-537-6945USA1F1-815-235-6847International11-800-737-3360Canada37
Manuals
Manual Switches AML55 Series
Paddle (Cover) Legend Sheet
38Honeywell1SensingandControl11-800-537-6945USA1F1-815-235-6847International11-800-737-3360Canada
Manual Switches AML54/56 Series
Rocker Switch Operators
Honeywell1SensingandControl11-800-537-6945USA1F1-815-235-6847International11-800-737-3360Canada39
COLOR DISPLAY OPTIONS
Rocker operators are assembled to the
switches by simply snapping them into
recesses in the switch operator sockets.
Transmitted color Color is displayed
whether lamp is On or Off. Choice of 1-
piece rockers (types 10 or 20) or rockers
with clear cap and colored translucent
insert (types11or12).
Deadfronthiddencolor/hiddenlegend
Rockerappears black with lamp Off. Leg-
end and color appear when illuminated
(types 30 or 40).
Projected color Translucent white
rocker with transparent colored insert
(types 50 or 60). White rocker appears
colored when illuminated.
AML54 ROCKER OPERATOR ORDER GUIDE (All possible color combinations may
not be available.)
For AML14, AML24, AML34 incandescent or non-lighted display.
AML54-F 10 R
Rocker Color See Note Below
Rocker
Operator Type Display/Legend
Type
Full rocker,
1/2 rocker,
or one side of
two-piece
rockers
Other side
of two-piece
rockers
AML54-F
Full Rocker
AML54-E
1/2 Rocker
AML54-T
Two-Piece Rocker
Transmitted Color
10 No legend
20 With legend on cap
Transmitted Color
(Clear cap and
color insert)
11 No legend
21 With legend on
insert
Dead Front
(Smoky gray cap
and color insert)
30 No legend
40 With legend on
insert
***Projected Color
(White cap and
color insert)
50 No legend
60 With legend on cap
R
Red
Y
Yellow
G
Green
B
Blue
***W
White
K*
Black
L*
Gray
A**
Amber
R
Red
Y
Yellow
G
Green
B
Blue
***W
White
K*
Black
L*
Gray
A**
Amber
*Not for lighted display.
**Not available with projected color or dead
front.
***Insert is clear for projected color when
‘‘
W’’
is used.
Not available for use with AML34 power
switches.
Example: AML54-F10R
Full rocker; with transmitted color, no
legend; red.
NOTE: AML54-F10 and AML54-F20 are
one-piece, one-color full rockers. Thus
only one color code letter is necessary
when ordering. Include a two letter code
for all other AML54-E (and AML54-T)
catalog listings.
AML56 ROCKER OPERATOR ORDER GUIDE
For AML36 neon display.
AML56-N 10 R Y
Rocker Display/Legend Lens Rocker
Operator Type Type Color Color
AML56-N Transmitted Color T R
10 Clear Red
No Legend RY
Red Yellow
20 Y G
With Legend Yellow Green
B
Full Rocker
with
Colored Lens
Blue
W
White
K
Black
AML56-N rockers have a colored lentic-
ular lens window which extends over the
neon lamp.
Example: AML56-N10RY
Fullrocker;withtransmittedcolor,noleg-
end; yellow rocker and red lens.
Manuals
Manual Switches AML56 Series
Rocker Switch Operators
40Honeywell1SensingandControl11-800-537-6945USA1F1-815-235-6847International11-800-737-3360Canada
HOW TO ORDER ROCKER LEGENDS
When specifying legended rockers, sub-
mit a legend order sheet to cover each
catalog listing. These forms identify the
maximum number of lines per area and
the maximum characters per line, based
on the type size you request. To insure
proper legend orientation, rocker switch
housings (when viewed from the panel
front)shouldhavethe‘‘MICROSWITCH’’
identification facing UP or to the LEFT.
Rockerlegendordersheetsareshownon
the following pages. Reproduce them on
your office copier.
Legend Sheet Form No.
AML54 Rockers FO-63566
AML56 Rockers FO-63564
AML56 ORDER GUIDE
For AML16 and AML26 LED display.
AML56-T 10 R B
Rocker Color See Notes Below
1/2-rocker
Rocker Display/Legend or LED side of Other side of
Operator Type Type two-piece rockers two piece rockers
AML56-E
1/2-Rocker*
(For one LED)
AML56-T
Two-Piece Rocker
(For one LED)
AML56-H
Two-Piece Rocker
(For two LED’s)
Transmitted Color
10 No Legend
20 With Legend
RR
Red Red
Y
Yellow
G
Green
B
Blue
W
White
K
Black
L
Gray
Y
Yellow
G
Green
B
Blue
W
White
K
Black
L
Gray
Example: AML56-T10RB
Two-piece rocker; with LED window in
one side, transmitted color, no legend;
red (LED side) and blue (non-LED side).
* Notes:
1Only one color code letter is necessary
for AML56-E 1/2-rockers. AML56-E, -T,
and -H rockers have an open window
which allows LEDs to be flush with the
rocker surface.
2To order a 1/2-rocker without the LED
‘‘window,’’ specify an AML54-E listing
from the previous page.
Manual Switches AML54 Series
Rocker Legend Sheet
Honeywell1SensingandControl11-800-537-6945USA1F1-815-235-6847International11-800-737-3360Canada41
Manuals
Manual Switches AML56 Series
Rocker Legend Sheet
42 Honeywell1SensingandControl11-800-537-6945USA1F1-815-235-6847International11-800-737-3360Canada
Manual Switches AML61 Series
Mounting Hardware
Honeywell1SensingandControl11-800-537-6945USA1F1-815-235-6847International11-800-737-3360Canada43
FOR STRIP AND MATRIX MOUNT ASSEMBLIES FEATURES
1Enables subpanel mounting of
devices in factory assembled metal
cans which are welded together in
strips or matrices. Assures accurate
alignment and enables pre-wiring.
1L-shaped mounting brackets conform
to various panel thicknesses, using
spacers.
1Simplifies panel fabrication, since
only one large cutout is required.
1Facilitates printed circuit board
mounting. Operating force is
transmitted to mounting hardware,
rather than P.C. board.
1For custom matrices contact the
MICRO SWITCH Application Center.
1Mountingdimensionspage52.AML61 MOUNTING HARDWARE ORDER GUIDE
(For standard strip mount assemblies)
AML61 B A 5 A
Mounting Bracket Number Mounting Bracket
Type Orientation of Cans Location
Square cans:
AML61 B
(Plain finish)
AML61 J
(Black finish)
A
E
1
2
3
4
5
6
7
8
9*
10*
11*
12*
*A,C,D&E
orientation only.
Rect. cans: B
AML61 E
(Plain finish)
AML61 K C D
(Black finish)
AG
BK
CL
DP
ET
F
U
NO
BRACKETS
1To order one rectangular can with mounting brackets on short sides, specify AML61EB1
or AML61KB1 .
Example: AML61EC5A
Five rectangular cans, plain finish (un-
painted), long sides abutting; type A
mountingbracketsonlongsides,located
flushwith switch or indicatorbezel. (Type
Tbracketbrings top of annunciator bezel
flush with top of .160 in./4,1mm panel.)
This strip has Type F brackets for P.C.
board mounting.
NON-STANDARD ASSEMBLIES
Use the order form on the following page
to specify non-standard AML61 strip or
matrix assemblies. You may reproduce it
on your office copier, or order pads from
the 800 number. Request FO-63558.
Manuals
Manual Switches AML71/75 Series
Barriers/Panel Seal Accessories
44Honeywell1SensingandControl11-800-537-6945USA1F1-815-235-6847International11-800-737-3360Canada
AML71 BARRIERS
Drawingshowstwoswitches, slotmount-
ed.Fromlefttoright: onecenterbarrier, a
second switch, plus another end barrier
to complete the arrangement.
Whenmountinganindividualunit,anend
barrier is attached to each side of the
housing. The center barrier is used in a
slot mount array.
FEATURES
1Barriers separate individually
mounted switches and indicators
help prevent inadvertent actuation of
two pushbutton switches with a single
push.
1Front of panel mounting simplifies
installation.
AML71 BARRIER ORDER GUIDE (See notes)
Barriers shown in order guide are black.
Barrier Length Type Catalog Listing
Short Center AML71SCB
(For use with square devices and short side
of rectangular devices.) End AML71SEB
Long Center AML71LCB
(For use with long side of rectangular
devices.) End AML71LEB
Notes:
Not for use with AML61mounting hardware or any full guard bezel products.
Not for use with AML41J, K, or L lens type indicators; or AML45 annunciators.
AML75 PANEL SEAL FEATURES
1AML75 panel seals fit pushbutton
switches and indicators.
1Provides protection from
contamination from accidental
beverage spills, dust, and dirt.
1Easy to install, without tools
1No effect on display color, light
intensity, or legend quality.
1Replace seal or change lamps without
removing switch from panel.
1For .19-inch standard height square or
rectangular pushbuttons.
1Mountingdimensionspage53.
The design complements AML’s func-
tional appearance, creating a pleasing
framed effect around the button. It con-
sists of a matte black plastic base which
press-fits between the panel and switch
bezel, and a transparent flexible seal
whichsnaps intothebase. PK8521,ship-
pedwitheachorder,providesinstallation
instructions.
Buttoncolorsandlegends canbeviewed
without distortion whether lighted or un-
lighted. Seals can be conveniently re-
placedorremovedfor relamping,without
removing the switch from panel.
Operating temperature range is 32°to
131°F(0°to 55°C).
AML75 PANEL SEAL ORDER GUIDE
For Use With:
Square .19NRectangular .19N
Description high pushbuttons high pushbuttons Rockers
Base & Seal AML75ABC AML75BBC AML75RBC
Notes:
Multipleunitsshouldnot be mounted in a
single slot, since this would create an
unsealed space between each unit.
AML75seals are notfor use withbarriers,
full guard bezels, AML61 mounting hard-
ware,AML45annunciators,orAML41J,K,
or L lens type indicators.
MATERIAL
Base: Polypropylene
Cap: Polyvinyl Chloride
Manual Switches AML76/78 Series
Switch Guard/Panel Plugs, Dummy Housings
Honeywell1SensingandControl11-800-537-6945USA1F1-815-235-6847International11-800-737-3360Canada45
FEATURES
1Button cannot be operated when
switch guard cover is closed,
preventing accidental operation
1Wire lock-down feature further
prevents unintentional actuation of the
switch.
1Lamps can be replaced with the
switch guard attached, without
special tools, saving maintenance
time
1Can be used with alternate or
momentary action square or
rectangular .19 inch standard height
AML buttons
1Shock resistant construction, for long,
maintenance-free life
AML76 switch guard protects square
and rectangular .19-inch standard
height pushbuttons from inadvertent
actuation. It is for use with standard
bezel type switches only.
Seepage53formountingdimensions.
The switch guard cover is clear, polycar-
bonate thermoplastic through which the
button is easily visible. The word ‘‘lift’’ is
molded onto the top front edge of the
guard. The bracket is bright-finished
stainless steel.
The switch guard may be assembled to
the AML pushbutton before the switch is
installed in a panel. Or, the guard can be
assembled to a pushbutton already
mounted in a panel, providing the wiring
is sufficiently slack to raise the switch be-
zel above the panel; and if there is suffi-
cient clearance with adjacent units. PK
8522 contains installation instructions
and is shipped with each order.
AML switch guards may be mounted in
horizontal or vertical matrices. A wire
lock-down feature, using .020-inch diam-
eterlockingwire,maybeusedasanaddi-
tional protection.
SWITCH GUARD ORDER GUIDE
Guard Type* Catalog Listing
Square AML76C10T01P
Rectangular AML76F10T01P
* The word
‘‘
LIFT’’ is molded into the cover. If other
languages are desired contact the 800 number.
Note: Switch guard is not designed for use with
AML61 mounting hardware, AML71 barriers, or full
guard bezel switches.
CONNECTOR BLOCK
AML79CC
This connector block can be used with
square 1 and 2 pole AML21 and AML22
switches with .110 ×.020 terminals to
enable plug-in wiring.
AML78 PANEL PLUGS
Plastic panel plugs (shown above) en-
able the user to provide for future needs
by punching extra panel holes. Finished
in matte black, they are the same height
as the standard AML bezel when snap-
ped in place from the panel front.
Panel plugs are only for use in individual
holes or with AML61 mounting hardware
in multi-station strips. (Use dummy hous-
ings in strip cutouts without AML61
mounting hardware.)
PANEL PLUG ORDER GUIDE
Plug Type Catalog Listing
Square AML78CB
Rectangular AML78FB
AML78 DUMMY HOUSINGS
Dummyhousingscanbeusedtoprovide
for expansion needs in strip cutouts with-
out AML61 mounting hardware. They
havemountingclips,butthereisnoprovi-
sion for switching or illumination.
DUMMY HOUSING ORDER GUIDE
Catalog
Dummy Housing Type* Listing
Rectangular AML78F100
(Pushbutton style)
Rectangular AML78J100
(Lens indicator style)
* Order AML51 Buttons/lenses for use with dummy
housings.
Manuals
Manual Switches AML91 Series
Lamps, Soldering Recommendations, Receptacles
46Honeywell1SensingandControl11-800-537-6945USA1F1-815-235-6847International11-800-737-3360Canada
AML91 LAMP ORDER GUIDE
Lamp Industry Catalog
Type Lamp No. Voltage Listing
86 6.3 AML91LA86
Incandescent
T-1-3/4 73 14.0 AML91LA73
wedge base 85 28.0 AML91LA85
LAMP DATA
The following data was compiled from
manufacturer’s specifications, for refer-
ence only.
INCANDESCENT LAMPS
Industry Life
Lamp No. Volts Amps Watts MSCP A/C Volts
86 6.3 .200 1.25 .49 20,000 hours
5.5 .185 1.12 .246 106,200 hours
5.0 .177 .89 .185 290,000 hours
73 14.0 .080 1.12 .30 15,000 hours
12.0 .077 1.00 .23 36,450 hours
85 28.0 .04 1.12 .30 7,000 hours
24.0 .037 .89 .177 41,860 hours
Neon Lamps
25,000 hours (half life)
INTEGRAL LEDs
Peak Inverse Voltage
w/o Diode w/Diode
LEDs Furnished
Permanently
Installed in
These Products VfIfVPD Protection Protection
AML12, 15, 16, 2.4 V 20 mA .7 V 5 V 34 V
22, 25, 26, 42
AML45 2.4 V 20 mA .7 V 4 V 33 V
100,000 hours (half life).
AML92 SERIES LEDs
For use with these AML switches and in-
dicators equipped with lamp sockets:
Pushbutton switches: AML11 (Square
Only)*, AML21(rectangular and square),
and AML31.
Paddle switches: AML31/23/33
Rocker switches: AML14/24/34
Indicators: AML41
* Rectangularsolidstatewithoneortwolampcircuits
cannot be used with LED catalog listings ending in
‘‘
L’’.
OPERATING CHARACTERISTICS
VFFwd. Voltage (typ.)
Type Yellow Green Red White IFFwd.
Current VRRev.
Voltage
Quad Chip 8.6 8.6 7.8 15 mA 16 V
Six Chip 4 V 4 V 4 V 4 V 50 mA 5.6 V
TEMPERATURE RANGE
(Quad Chip or Six Chip)
Operating: –20 to 60°C (–4 to140°F)
Storage: –30 to100°C (–22 to 212°F)
AML92 ORDER GUIDE
LED Color Quad Chip Six Chip
Red AML92ERY AML92ERL
Green AML92EGY AML92EGL
Yellow AML92EYY AML92EYL
White AML92EWL**
** For use with white or yellow buttons.
SOLDERING RECOMMENDATIONS
Allterminalsaresolderplated.Propersol-
dering and cleaning procedures must be
followed to maintain the reliability of AML
products during installation. An instruc-
tion sheet which outlines these proce-
dures is included with AML shipments.
You may also obtain a copy from your
MICRO SWITCH Sales Office. Request
PK 8518.
Asageneralguide,thefollowinginforma-
tion may be used:
Use a 280°C (538°F) solder iron tip, up to
6 seconds duration, with a 60-40 rosin
core solder. This allows the terminal to
heatquicklyontheexteriorofthehousing
only, and greatly reduces the chance of
flux migrating inside the housing.
LED APPLICATION INFORMATION
Forthosedeviceswithoutinternalcurrent
limitingresistors,suitableexternalcontrol
of the LED current must be provided. It is
recommended that a minimum of 5 VDC
open circuit voltage with an appropriate
seriesresistancebeusedtodriveLEDde-
vices.Thisminimizestheeffectoftemper-
ature (current variation) on forward volt-
age of the LED.
Resistor values can be determined by
supply voltage or current for LED:
RSJE–V
f
I
f
WHERE: RSJSeries Resistance
EJSupply Voltage
VfJForward Voltage of LED
IfJCircuit Current
If a diode is added in series for reverse
polarity protection then:
RSJE–V
f–V
PD
If
WHERE: VPD Forward Voltage of
Protection Diode
Manual Switches AML Series
Mounting Dimensions (For Reference Only)
Honeywell1SensingandControl11-800-537-6945USA1F1-815-235-6847International11-800-737-3360Canada47
AML11/12 and 21/22 SWITCHES Note: Top of full guard bezel housing AML27 SWITCHES
AML41C/D and AML42C INDICATORS .19/5,0 from panel.
PUSHBUTTONS KEYLOCK
Forterminallocations,seepage49.Forterminallocations,seepage50.
AML14/16 and AML24/26 SWITCHES AML13/15 and 23/25 SWITCHES
ROCKERS PADDLES
Forterminallocations,seepage49/50.Forterminallocations,seepage49/50.
AML41 INDICATOR AML42 INDICATOR TERMINAL TYPES
LENS STYLE MINIATURE
Forterminallocations,seepage50.
NOTE
1Dimensions are mm or mm/IN
IN
Solder Hole will accept two #22 AWG
Stranded Conductor (per NEMA publication
DC-2 1976)
Manuals
Manual Switches AML Series
Mounting Dimensions (For Reference Only)
48Honeywell1SensingandControl11-800-537-6945USA1F1-815-235-6847International11-800-737-3360Canada
AML31/32 SWITCHES AML34/36 SWITCHES
PUSHBUTTON ROCKER
AML33/35 SWITCHES TERMINAL LOCATIONS
PADDLE PUSHBUTTON ROCKER AND PADDLE
PANEL CUTOUT FOR SINGLE-STATION
FRONT-OF-PANEL MOUNTING
Recommended panel thickness: .060-.187/1,52-4,75
NOTES
1 Dimensions are mm or mm/IN
IN
Manufacturers logo on this side of housing
Solder Hole Will Accept One #14 AWG Stranded Conductor
(Per NEMA Publication DC-21976)
PANEL PUNCH FOR AML SERIES
A panel punch is manufactured by Greenlee-Textron Tool Co.,
Rockford, IL (815-926-3011).
Manual Switches AML Series
Mounting Dimensions (For Reference Only)
Honeywell1SensingandControl11-800-537-6945USA1F1-815-235-6847International11-800-737-3360Canada49
TERMINAL LOCATIONS FOR AML10 SWITCHES
PUSHBUTTONS
Solder and Quick-Connect Printed Circuit
Illuminated devices shown (non-illuminated devices do not have lamp terminals).
ROCKERS AND PADDLES
Solder and Quick-Connect Printed Circuit
One Integrated Circuit Two Integrated Circuits One Integrated Circuit Two Integrated Circuits
Illuminated devices shown (non-illuminated devices do not have lamp terminals)
TERMINAL LOCATIONS FOR AML41 INDICATORS
Solder and Quick-Connect
1 Incandescent
Lamp Circuit 1 Incandescent
Lamp Circuit 2 Incandescent
Lamp Circuits 2 Incandescent
Lamp Circuits 1-3 Incandescent
Lamp Circuits
Printed Circuit
1Incandescent 1Incandescent 2 Incandescent 2 Incandescent 1-3 Incandescent
Lamp Circuit Lamp Circuit Lamp circuits Lamp Circuits Lamp Circuits
TERMINAL LOCATIONS FOR AML42 INDICATORS
Solder and Quick-Connect Printed Circuit
1 LED Circuit 1 LED Circuit 1 LED Circuit 1 LED Circuit
NOTE
1 Dimensions are MM or MM/IN
IN
Manufacturer’s logo on this side of
housing
4 Lamp terminals are not provided for
non-illuminated devices
positive terminal ident. (+) marked this
side of housing
1 lamp termination identified by
‘‘
B’’.
2 lamp termination identified by
‘‘
A’’
and
‘‘
C’’.
Manuals
Manual Switches AML Series
Mounting Dimensions (For Reference Only)
50Honeywell1SensingandControl11-800-537-6945USA1F1-815-235-6847International11-800-737-3360Canada
TERMINAL LOCATIONS FOR AML20 SWITCHES
PUSHBUTTON SWITCHES
Solder or Quick-Connect Terminal identification marked on each adja-
cent side of housing KEYLOCK SWITCHES
Solder or Quick-Connect
Printed Circuit
1 Pole 4 Pole2 Pole
PUSHBUTTON SWITCHES
Printed Circuit
1Pole 2 Pole 4 Pole
1Pole 2 Pole
ILLUMINATED ROCKERS AND PADDLES
Solder or Quick-Connect Printed Circuit
1Pole 2 Pole 1Pole 2 Pole
NON-ILLUMINATED ROCKERS AND PADDLES
Solder or Quick-Connect Printed Circuit
1Pole 2 Pole 4 Pole
Manual Switches AML Series
Mounting Dimensions (For Reference Only)
Honeywell1SensingandControl11-800-537-6945USA1F1-815-235-6847International11-800-737-3360Canada51
ANNUNCIATORS
AML45 SERIES
Manufacturer’s logo on this side of housing
Forpanelpunchmanufacturer,seepage48.
Manuals
Manual Switches AML Series
Mounting Dimensions (For Reference Only)
52Honeywell1SensingandControl11-800-537-6945USA1F1-815-235-6847International11-800-737-3360Canada
MULTI-STATION FRONT-PANEL MOUNTING
Panelcutouts(Seepage48 forpanelpunchmanufacturer.)
Square Switches & Indicators Rect. Switches & Indicators Annunciator
(.8) (No. of units) .045* (1.20) (No. of units) .045* (.40) (No. of units) .045*
(20,3) (No. of units) 1,14* (30,5) (No. of units) 1,14* (10,1) (No. of units) 1,14*
For each barrier, add .053/1,35 * Note: If barriers are used, do not subtract .045 in./1,14 mm from the panel cutout
formula. (.045 in./1,14mm is the allowance for the width of the bezel.)
AML61 MULTI-STATION SUBPANEL MOUNTING
Panel cutouts for AML61
Mounting Bracket
Orientation Width Length
A* in. .810
mm 20,57 (.810)(No. of units)
B in. .810
mm 20,57 (1.210)(No. of units)
C or D* in. 1.210
mm 27,94 (.810)(No. of units)
*Morethan twocanswithmounting bracketsrequiredforstrips
of more than10 units.
AML61 MOUNTING CENTERS
Mounting Centers/Number of Cans
Mounting Bracket
Orientation 123456789101112
‘‘
A’’ or
‘‘
C’’ in. 1.285 2.095 2.905 3.715 4.525 5.335 6.145 6.955 7.765 8.575 9.385 10.195
mm 32,64 53,21 73,79 94,36 114,94 135,51 156,08 176,66 197,23 217,81 238,38 258,95
‘‘
B’’ in. 1.685 2.895 4.105 5.315 6.525 7.735 8.945 10.155
mm 42,80 73,53 104,27 135,00 165,74 196,48 227,20 257,94
‘‘
D’’ or
‘‘
E’’ in. on CL.807 1.614 2.421 3.228 4.035 4.842 5.649 6.456 7.263 8.070 8.877
mm on CL20,50 41,00 61,49 81,99 102,49 122,99 143,48 163,98 184,48 204,98 225,48
Tolerance J±.015
C
D
E
B
A
Manual Switches AML Series
Mounting Dimensions (For Reference Only)
Honeywell1SensingandControl11-800-537-6945USA1F1-815-235-6847International11-800-737-3360Canada53
AML75 PANEL SEAL ACCESSORY
Panel cutouts
Multiple panel sealed units should not be
mounted together in a single elongated
slot, since this would create an unsealed
space between each unit.
Side-by-side mounting can be achieved,
per the center-to-center dimensions
shown in the drawing. (Dotted lines in-
dicate the seal bases which are abutting
at front of panel.)
AML75 seals are not designed for use
with the AML61mounting system.
NOTE:Suggestedcutoutdimensionsare
based on an .125N/3,18 mm panel thick-
ness.Individualpreferencesforinpanelfit
may require measurement of assemblies
before panels are cut.
AML76 SWITCH GUARD ACCESSORY
PANEL CUTOUTS
Manuals
Mouser Electronics
Authorized Distributor
Click to View Pricing, Inventory, Delivery & Lifecycle Information:
Honeywell:
AML11BBA3EE AML11CBB2EE AML11CBB3EA AML11CBB3EE AML11CBE2EA AML11CBE2EE
AML11EBA2EE AML11EBA3EA AML11EBA3EE AML11FBA2EA-001 AML11FBA3EA-001 AML11FBA3EE
AML11FBB2EE AML11FBC2EA AML11FBC2EE AML11FBC3EA AML11FBE2EA AML11FBE2EE AML11FBE3EA
AML11FBE3EE AML11GBA2EE AML11GBB2EA AML11GBB2EE AML11GBB3EA AML11GBB3EE
AML11GBE2EA AML11GBE2EE AML11GBE3EA AML11GBE3EE AML11HBA2EE AML11HBA3EA AML11JBA2EE
AML11JBA3EE AML11JBB2EA AML11JBB3EA AML11JBE2EE AML11LBA2EA AML11LBA2EE AML11LBA3EA
AML11LBA3EE AML11LBE2EE AML11LBE3EA AML11MBB3EA AML11MBC3EE AML11MBE3EA AML11MBE3EE
AML12CBB2EE AML12CBC3EA AML12CBC8EA AML12CBD2EA AML12CBD2EE AML12CBD3EE
AML12CBE2EA AML12CBE3EA AML12CBF2EA AML12CBF2EE AML12CBF3EA AML12CBF3EE AML12CBH2EE
AML12CBJ2EA AML12CBJ3EA AML12CBJ3EE AML12CBL2EA AML12CBM2EA AML12CBM3EA
AML12CBR2EA AML12CBS2EE AML12CBS3EA AML12CBW2EA AML12CBW8EA AML12CBX2EA
AML12CBX2EE AML12CBX3EA AML12CBX3EE AML12HBC3EA AML12JBB2EA AML12JBB2EE AML12JBB3EE
AML12JBC2EA AML12JBC8EA AML12JBC8EE AML12JBF3EA AML12JBH2EA AML12JBJ2EA AML12JBJ8EA
AML12JBJ8EE AML12JBR2EA AML12JBS2EA AML12JBS2EE AML12JBS8EA AML12JBS8EE AML12JBX2EE
AML12CBB3EA AML11BBA2EA AML11BBA2EE AML11BBA3EA AML11CBA2EE AML11CBA3EE AML11CBE3EA
AML11CBE3EE