CABLE BREAKOUT BOOTS, THREE ENTRY Table of Dimensions, inch (mm): PART NUMBER (See Note*) BODY ID Exp. Rec'd. (A), Min (B), Max T3-9FR T14-23FR T23-50FR T42-100FR T60-150FR T150-300FR T200-400FR T-400FR T500-600FR 0.90 (23) 1.20 (30) 1.20 (30) 1.70 (43) 1.70 (43) 2.40 (61) 2.40 (61) 3.20 (81) 4.90 (124) Note*: Material: 0.36 (9) 0.69 (18) 0.69 (18) 0.90 (23) 0.90 (23) 1.40 (36) 1.40 (36) 2.00 (51) 2.32 (59) LEG ID Exp. (C), Min Rec'd. (D), Max 0.33 (8) 0.50 (13) 0.50 (13) 0.82 (21) 0.82 (21) 1.25 (32) 1.25 (32) 1.40 (36) 2.00 (51) 0.12 (3) 0.18 (5) 0.18 (5) 0.30 (8) 0.30 (8) 0.50 (13) 0.50 (13) 0.75 (19) 1.00 (25) Rec'd. Wall Thickness Ref (W) 0.04 (1.0) 0.09 (2.3) 0.09 (2.3) 0.12 (3.0) 0.12 (3.0) 0.12 (3.0) 0.12 (3.0) 0.14 (3.6) 0.12 (3.0) Length Recovered Min (E), Body (F), Leg 2.0 (51) 2.3 (58) 2.3 (58) 2.3 (58) 2.3 (58) 3.5 (89) 3.5 (89) 3.5 (89) 7.5 (191) 0.7 1.0 1.0 1.2 1.2 1.6 1.6 1.6 2.2 (18) (25) (25) (30) (30) (41) (41) (41) (56) Add "NA" to the end of Part Number if no adhesive is required Heat shrinkable boot material in accordance with -3 polyolefin Factory applied sealant: Factory applied hot melt adhesive is standard. CUSTOMER DRAWING TITLE: Raychem Molded Parts 305 Constitution Drive, Menlo Park, CA 94025 Unless otherwise specified dimensions are in inches. [Metric dimensions are shown in brackets CABLE BREAKOUT BOOT, THREE ENTRY DOCUMENT NO.: TXXX-XXXFR REV: Tyco Electronics reserves the right to amend this drawing at any time. Users should evaluate the suitability of the product for their application. REVISED BY: CAGE CODE: G SCALE: DATE: None FILE : Org. Date: ECO #: UNGUYEN 06090 TXXX-XXXFR.doc 5/7/07 09-019755 (c) 2003-2009 Tyco Electronics Corporation. All rights reserved If this document is printed it becomes uncontrolled. Check for the latest revision. August 27, 2009 SIZE A SHEET: 1 of 1