0479460000 - Weidmuller - Datasheet.Live

Modular terminals with screwless connection | with tab connection | 2,5 mm²

- 1 -

General ordering data

Order No. 0479460000

Part designation AST 4/35 SF 6.3

Version Special terminal, special connections, 2.5 mm²,

Screw connection, PA 66, beige, TS 35

EAN 4008190108625

Qty. 100 pc(s).

Product notes

Note, ordering data Cable-lug connections should be connected with

insulating sleeves. 20 A with F 6.3 or 2 x F 2.8

Note, technical data The rated voltage is 800 V when using a cable-lug

(flat) connector with IH 6.3 insulating sleeves.

Note, accessories Pluggable adapter STA 2,5/2 - STA 2,5/8 only for

PA - Version.

Additional technical data

Colour of insulating material beige

Connection direction on side

End plate required Yes

Explosion-tested version "Ex e" No

Installation advice TS 35

Insulating material PA 66

Levels cross-connected internally No

No. of identical terminals 1

No. of levels 1

No. of terminal strips per level 2

Open sides right

Operating temperature range - 50 °C, + 100 °C

Product family SAK Series

Type of connection Screwed

Type of mounting Snap-on

UL 94 flammability rating of insulation material V2

Version Feed-through terminal

CSA rating data

Voltage (CSA) 300 V

CSA current 16 A

Min. cross-section (CSA) AWG 24

Max. cross-section (CSA) AWG 12

Modular terminals with screwless connection | with tab connection | 2,5 mm²

- 2 -

Conductors for clamping (additional

connection)

Type of connection Flat-blade connection

No. of connections 1

Flexible with ferrule, min. (DIN 46228 pt 1) 0.5 mm²

Flexible with ferrule, max. (DIN 46228 pt 1) 2.5 mm²

Conductors for clamping (rated connection)

Clamping range, min. 0.2 mm²

Clamping range, max. 4 mm²

Type of connection Screw connection

2nd type of connection screwed

Connection direction on side

No. of connections 1

Stripping length 9 mm

Clamping screw M 2.5

Blade size 0.6 x 3.5 mm

Tightening torque range 0.4...0.7 Nm

Torque level with DMS electric screwdriver 1

Gauge to IEC 60947-1 A3

Solid, min. 0.5 mm²

Solid, max. 4 mm²

Stranded, min. 1.5 mm²

Stranded, max. 2.5 mm²

Flexible, min. 0.5 mm²

Flexible, max. 2.5 mm²

Flexible with ferrule, min. (DIN 46228/1) 0.5 mm²

Flexible with ferrule, max. (DIN 46228/1) 2.5 mm²

Flexible, min., ferrule with plastic collar (DIN

46228 pt 4)

2.5 mm²

Flexible, max., ferrule with plastic collar (DIN

46228 pt 4)

2.5 mm²

Twin wire-end ferrule, min. 0.5 mm²

Twin wire end ferrule, max. 1.5 mm²

AWG conductor size, min. AWG 24

AWG conductor size, max. AWG 12

AWG conductor size, min. 0.21 mm²

AWG conductor size, max. 3.31 mm²

Dimensions

Width 6.2 mm

Height of lowest version 40.1 mm

Length 40 mm

Weight 7.32 g

TS 35 offset 20 mm

Disconnect terminals

Torque level with DMS electric screwdriver 1

Other connections

Cable-lug connection unslotted

No. of connections 1

Modular terminals with screwless connection | with tab connection | 2,5 mm²

- 3 -

Other connections

Rated cross-section spade connector 2.8 mm 1 mm²

Rated cross-section spade connector 6.3 mm 2.5 mm²

Rating data

Rated cross-section 2.5 mm²

Rated voltage 500 V

Rated impulse voltage 6 kV

Rated current 20 A

Standards IEC 60947-7-1 / IEC 61210

Current with max. conductor 20 A

Pollution severity 3

UL rating data

Voltage (UL) 300 V

Current (UL) 13 A

Min. cross-section (UL) AWG 22

Max. cross-section (UL) AWG 12

Approvals

Approvals institutes

Classifications

ETIM 2.0 EC000897

ETIM 3.0 EC000897

eClass 4.1 27-14-11-31

eClass 5.0 27-14-11-31

eClass 5.1 27-14-11-31