MJD41C, NJVMJD41CT4G (NPN), MJD42C, NJVMJD42CT4G, NJVMJD42CRLG (PNP) Complementary Power Transistors http://onsemi.com DPAK For Surface Mount Applications Designed for general purpose amplifier and low speed switching applications. SILICON POWER TRANSISTORS 6 AMPERES 100 VOLTS, 20 WATTS Features Lead Formed for Surface Mount Applications in Plastic Sleeves (No Suffix) Straight Lead Version in Plastic Sleeves ("1" Suffix) Electrically Similar to Popular TIP41 and TIP42 Series Epoxy Meets UL 94 V-0 @ 0.125 in ESD Ratings: Human Body Model, 3B > 8000 V Machine Model, C > 400 V NJV Prefix for Automotive and Other Applications Requiring Unique Site and Control Change Requirements; AEC-Q101 Qualified and PPAP Capable These are Pb-Free Packages* DPAK CASE 369C STYLE 1 DPAK-3 CASE 369D STYLE 1 MARKING DIAGRAMS AYWW J4xCG AYWW J4xCG DPAK A Y WW J4xC G DPAK-3 = = = = Assembly Location Year Work Week Device Code x = 1 or 2 = Pb-Free Package ORDERING INFORMATION See detailed ordering and shipping information in the package dimensions section on page 3 of this data sheet. *For additional information on our Pb-Free strategy and soldering details, please download the ON Semiconductor Soldering and Mounting Techniques Reference Manual, SOLDERRM/D. Semiconductor Components Industries, LLC, 2012 February, 2012 - Rev. 11 1 Publication Order Number: MJD41C/D MJD41C, NJVMJD41CT4G (NPN), MJD42C, NJVMJD42CT4G, NJVMJD42CRLG (PNP) MAXIMUM RATINGS Rating Symbol Max Unit VCEO 100 Vdc Collector-Base Voltage VCB 100 Vdc Emitter-Base Voltage VEB 5 Vdc Collector-Emitter Voltage Collector Current Continuous Peak IC Base Current IB Total Power Dissipation @ TC = 25C Derate above 25C PD Total Power Dissipation (Note 1) @ TA = 25C Derate above 25C PD Operating and Storage Junction Temperature Range TJ, Tstg 6 10 2 20 0.16 Adc Adc W W/C W 1.75 0.014 W/C -65 to +150 C Stresses exceeding Maximum Ratings may damage the device. Maximum Ratings are stress ratings only. Functional operation above the Recommended Operating Conditions is not implied. Extended exposure to stresses above the Recommended Operating Conditions may affect device reliability. THERMAL CHARACTERISTICS Characteristic Symbol Max Unit Thermal Resistance, Junction-to-Case RqJC 6.25 C/W Thermal Resistance, Junction-to-Ambient (Note 1) RqJA 71.4 C/W 1. These ratings are applicable when surface mounted on the minimum pad sizes recommended. http://onsemi.com 2 MJD41C, NJVMJD41CT4G (NPN), MJD42C, NJVMJD42CT4G, NJVMJD42CRLG (PNP) IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII IIIIIIIIIIIIIIIIIIIII IIIIIIIIIIIIIIII IIIIIIIIIIIIIIIIIIIII IIIIIIIIIIIIIIIIIIIIIIIII IIIIIIII IIIIIIII IIIIIIII IIII IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII IIIIIIIIIIIIIIIIIIIII IIIIIIIIIIIIIIII IIIIIIIIIIIIIIIIIIIII IIII IIII IIII IIII IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII IIIIIIIIIIIIIIIIIIIII IIII IIII IIII IIII IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII IIIIIIIIIIIIIIIIIIIII IIII IIII IIII IIII IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII IIIIIIIIIIIIIIIIIIIII IIII IIII IIII IIII IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII IIIIIIIIIIIIIIIIIIIII IIIIIIIIIIIIIIII IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII IIIIIIIIIIIIIIIIIIIII IIII IIII IIII IIII IIIIIIIIIIIIIIIIIIIII IIII IIII IIII IIII IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII ELECTRICAL CHARACTERISTICS (TC = 25_C unless otherwise noted) Characteristic Symbol Min Max 100 - - 50 - 10 - 0.5 30 15 75 - 1.5 - 2 3 - 20 - Unit OFF CHARACTERISTICS VCEO(sus) Collector-Emitter Sustaining Voltage (Note 2) (IC = 30 mAdc, IB = 0) Collector Cutoff Current (VCE = 60 Vdc, IB = 0) ICEO Collector Cutoff Current (VCE = 100 Vdc, VEB = 0) ICES Emitter Cutoff Current (VBE = 5 Vdc, IC = 0) IEBO Vdc mAdc mAdc mAdc ON CHARACTERISTICS (Note 2) hFE DC Current Gain (IC = 0.3 Adc, VCE = 4 Vdc) (IC = 3 Adc, VCE = 4 Vdc) Collector-Emitter Saturation Voltage (IC = 6 Adc, IB = 600 mAdc) VCE(sat) Base-Emitter On Voltage (IC = 6 Adc, VCE = 4 Vdc) VBE(on) - Vdc Vdc DYNAMIC CHARACTERISTICS Current Gain - Bandwidth Product (Note 3) (IC = 500 mAdc, VCE = 10 Vdc, ftest = 1 MHz) fT Small-Signal Current Gain (IC = 0.5 Adc, VCE = 10 Vdc, f = 1 kHz) hfe MHz 2. Pulse Test: Pulse Width v 300 ms, Duty Cycle v 2%. 3. fT = hfe ftest. ORDERING INFORMATION Package Type Package Shipping MJD41CRLG DPAK (Pb-Free) 369C 1,800 / Tape & Reel MJD41CT4G DPAK (Pb-Free) 369C 2,500 / Tape & Reel NJVMJD41CT4G DPAK (Pb-Free) 369C 2,500 / Tape & Reel MJD42CG DPAK (Pb-Free) 369C 75 Units / Rail MJD42C1G DPAK-3 (Pb-Free) 369D 75 Units / Rail MJD42CRLG DPAK (Pb-Free) 369C 1,800 / Tape & Reel NJVMJD42CRLG DPAK (Pb-Free) 369C 1,800 / Tape & Reel MJD42CT4G DPAK (Pb-Free) 369C 2,500 / Tape & Reel NJVMJD42CT4G DPAK (Pb-Free) 369C 2,500 / Tape & Reel Device For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging Specifications Brochure, BRD8011/D. http://onsemi.com 3 MJD41C, NJVMJD41CT4G (NPN), MJD42C, NJVMJD42CT4G, NJVMJD42CRLG (PNP) PD, POWER DISSIPATION (WATTS) TYPICAL CHARACTERISTICS TA 2.5 TC 25 2 20 VCC +30 V +11 V 1.5 0 15 TC TA SURFACE MOUNT 10 0.5 5 0 0 25 50 tr, tf 10 ns DUTY CYCLE = 1% 75 100 125 150 Figure 2. Switching Time Test Circuit 2 500 300 200 VCE = 2 V TJ = 150C 100 70 50 0.7 0.5 25C 30 20 TJ = 25C VCC = 30 V IC/IB = 10 1 t, TIME (s) hFE , DC CURRENT GAIN -4 V RB and RC VARIED TO OBTAIN DESIRED CURRENT LEVELS D1 MUST BE FAST RECOVERY TYPE, e.g.: MSB5300 USED ABOVE IB 100 mA MSD6100 USED BELOW IB 100 mA REVERSE ALL POLARITIES FOR PNP. Figure 1. Power Derating 10 7 5 0.06 0.3 0.2 tr 0.1 0.07 -55C td @ VBE(off) 5 V 0.05 0.2 0.1 0.3 0.4 0.6 1 2 4 0.03 0.02 0.06 0.1 6 0.2 0.4 1 2 IC, COLLECTOR CURRENT (AMP) Figure 3. DC Current Gain Figure 4. Turn-On Time 4 6 5 TJ = 25C TJ = 25C VCC = 30 V IC/IB = 10 IB1 = IB2 3 2 1.6 t, TIME (s) ts 1.2 VCE(sat) @ IC/IB = 10 VBE @ VCE = 4 V 0.2 0.3 0.4 0.3 0.2 0.1 0.07 0.05 0.06 0.1 VBE(sat) @ IC/IB = 10 0.1 1 0.7 0.5 tf 0.4 0 0.06 0.6 IC, COLLECTOR CURRENT (AMP) 2 0.8 D1 51 -9 V 1 SCOPE RB T, TEMPERATURE (C) V, VOLTAGE (VOLTS) RC 25 ms 0.6 1 2 3 4 6 IC, COLLECTOR CURRENT (AMP) 0.2 0.4 0.6 1 2 IC, COLLECTOR CURRENT (AMP) Figure 5. "On" Voltages Figure 6. Turn-Off Time http://onsemi.com 4 4 6 300 2 TJ = 25C TJ = 25C 200 1.6 IC = 1 A 2.5 A C, CAPACITANCE (pF) VCE , COLLECTOR-EMITTER VOLTAGE (VOLTS) MJD41C, NJVMJD41CT4G (NPN), MJD42C, NJVMJD42CT4G, NJVMJD42CRLG (PNP) 5A 1.2 0.8 Cib 100 70 Cob 50 0.4 0 10 20 30 50 100 200 300 IB, BASE CURRENT (mA) 500 1000 30 0.5 1 3 10 2 5 20 VR, REVERSE VOLTAGE (VOLTS) r(t), EFFECTIVE TRANSIENT THERMAL RESISTANCE (NORMALIZED) D = 0.5 0.3 0.2 0.2 0.05 0.02 0.03 P(pk) RqJC(t) = r(t) RqJC RqJC = 6.25C/W MAX D CURVES APPLY FOR POWER PULSE TRAIN SHOWN READ TIME AT t1 TJ(pk) - TC = P(pk) qJC(t) 0.1 0.1 0.07 0.05 50 Figure 8. Capacitance Figure 7. Collector Saturation Region 1 0.7 0.5 30 0.01 t1 t2 DUTY CYCLE, D = t1/t2 SINGLE PULSE 0.02 0.01 0.01 0.02 0.03 0.05 0.1 0.2 0.3 0.5 1 2 3 5 t, TIME (ms) 10 20 30 50 100 200 300 500 1000 Figure 9. Thermal Response IC, COLLECTOR CURRENT (AMP) 10 500ms 5 3 2 1ms dc 5ms 1 0.5 0.3 WIRE BOND LIMIT THERMAL LIMIT SECOND BREAKDOWN LIMIT CURVES APPLY BELOW RATED VCEO 0.1 0.05 0.03 0.01 There are two limitations on the power handling ability of a transistor: average junction temperature and second breakdown. Safe operating area curves indicate IC - VCE limits of the transistor that must be observed for reliable operation; i.e., the transistor must not be subjected to greater dissipation than the curves indicate. The data of Figure 10 is based on TJ(pk) = 150_C; TC is variable depending on conditions. Second breakdown pulse limits are valid for duty cycles to 10% provided TJ(pk) v 150_C. TJ(pk) may be calculated from the data in Figure 9. At high case temperatures, thermal limitations will reduce the power that can be handled to values less than the limitations imposed by second breakdown. 100ms TC = 25C SINGLE PULSE TJ = 150C 1 MJD41C, 42C 2 3 5 7 10 20 30 50 70 100 VCE, COLLECTOR-EMITTER VOLTAGE (VOLTS) Figure 10. Maximum Forward Bias Safe Operating Area http://onsemi.com 5 MJD41C, NJVMJD41CT4G (NPN), MJD42C, NJVMJD42CT4G, NJVMJD42CRLG (PNP) PACKAGE DIMENSIONS DPAK CASE 369C-01 ISSUE D A E b3 c2 B Z D 1 L4 A 4 L3 b2 e 2 NOTES: 1. DIMENSIONING AND TOLERANCING PER ASME Y14.5M, 1994. 2. CONTROLLING DIMENSION: INCHES. 3. THERMAL PAD CONTOUR OPTIONAL WITHIN DIMENSIONS b3, L3 and Z. 4. DIMENSIONS D AND E DO NOT INCLUDE MOLD FLASH, PROTRUSIONS, OR BURRS. MOLD FLASH, PROTRUSIONS, OR GATE BURRS SHALL NOT EXCEED 0.006 INCHES PER SIDE. 5. DIMENSIONS D AND E ARE DETERMINED AT THE OUTERMOST EXTREMES OF THE PLASTIC BODY. 6. DATUMS A AND B ARE DETERMINED AT DATUM PLANE H. C H DETAIL A 3 c b 0.005 (0.13) M H C L2 GAUGE PLANE C L SEATING PLANE A1 L1 DETAIL A ROTATED 905 CW SOLDERING FOOTPRINT* 6.20 0.244 2.58 0.101 5.80 0.228 INCHES MIN MAX 0.086 0.094 0.000 0.005 0.025 0.035 0.030 0.045 0.180 0.215 0.018 0.024 0.018 0.024 0.235 0.245 0.250 0.265 0.090 BSC 0.370 0.410 0.055 0.070 0.108 REF 0.020 BSC 0.035 0.050 --- 0.040 0.155 --- STYLE 1: PIN 1. BASE 2. COLLECTOR 3. EMITTER 4. COLLECTOR 3.0 0.118 1.6 0.063 DIM A A1 b b2 b3 c c2 D E e H L L1 L2 L3 L4 Z 6.172 0.243 SCALE 3:1 mm inches *For additional information on our Pb-Free strategy and soldering details, please download the ON Semiconductor Soldering and Mounting Techniques Reference Manual, SOLDERRM/D. http://onsemi.com 6 MILLIMETERS MIN MAX 2.18 2.38 0.00 0.13 0.63 0.89 0.76 1.14 4.57 5.46 0.46 0.61 0.46 0.61 5.97 6.22 6.35 6.73 2.29 BSC 9.40 10.41 1.40 1.78 2.74 REF 0.51 BSC 0.89 1.27 --- 1.01 3.93 --- MJD41C, NJVMJD41CT4G (NPN), MJD42C, NJVMJD42CT4G, NJVMJD42CRLG (PNP) PACKAGE DIMENSIONS IPAK CASE 369D-01 ISSUE C C B V NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: INCH. E R 4 A S 1 2 DIM A B C D E F G H J K R S V Z Z 3 -T- SEATING PLANE K J F D G H 3 PL 0.13 (0.005) M INCHES MIN MAX 0.235 0.245 0.250 0.265 0.086 0.094 0.027 0.035 0.018 0.023 0.037 0.045 0.090 BSC 0.034 0.040 0.018 0.023 0.350 0.380 0.180 0.215 0.025 0.040 0.035 0.050 0.155 --- MILLIMETERS MIN MAX 5.97 6.35 6.35 6.73 2.19 2.38 0.69 0.88 0.46 0.58 0.94 1.14 2.29 BSC 0.87 1.01 0.46 0.58 8.89 9.65 4.45 5.45 0.63 1.01 0.89 1.27 3.93 --- STYLE 1: PIN 1. BASE 2. COLLECTOR 3. EMITTER 4. COLLECTOR T ON Semiconductor and are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. "Typical" parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including "Typicals" must be validated for each customer application by customer's technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. PUBLICATION ORDERING INFORMATION LITERATURE FULFILLMENT: Literature Distribution Center for ON Semiconductor P.O. Box 5163, Denver, Colorado 80217 USA Phone: 303-675-2175 or 800-344-3860 Toll Free USA/Canada Fax: 303-675-2176 or 800-344-3867 Toll Free USA/Canada Email: orderlit@onsemi.com N. American Technical Support: 800-282-9855 Toll Free USA/Canada Europe, Middle East and Africa Technical Support: Phone: 421 33 790 2910 Japan Customer Focus Center Phone: 81-3-5817-1050 http://onsemi.com 7 ON Semiconductor Website: www.onsemi.com Order Literature: http://www.onsemi.com/orderlit For additional information, please contact your local Sales Representative MJD41C/D