N 50 8 COAXI--KIT " Concept You can mount any tip ( cable attachment ) with any head ( interface ) either in a straight or right angle configuration. Head + tip = Straight or R/A " Advantages of flexibility A lot of combinations are possible by screwing the chosen tips and heads together since any tip is intermateable with any head. During base station installation, you may need, in a field situation, to change the configuration at the last minute: D With the same head interface, the Coaxi--kit connector can be mounted either in a straight or a right angle position. It can be useful when the cable assembly is too short to be connected in a straight position. Using a Coaxi--kit, the existing cable assembly can be utilized by orienting the head to a right angle position, eliminating the need for a new cable assembly with a right angle connector. D One head can be used for all the different cables from a 5 mm flexible cable size to a 1/2 inch corrugated cable! D The same tip can be used for all the different interfaces of the BTS equipment which are supplied with 7/16 or N depending on the power transmitted, or manufacturer options. " Advantages of cost saving D By managing a lower number of P/N's you're making cost savings in qualification, purchasing, and inventory. For example, Radiall's full range represents 14 P/N ( 5 heads & 9 tips ) which are equivalent to 90 connector combinations (near 7 times more ! ). The other advantage is the increase of volume by P/N which gives lower cost. D Compared to a standard right angle connector, Coaxi--kit connectors use a simpler design. Including the price of the head & the tip, Coaxi--kit is a low cost right angle connector. " Less stock D By purchasing a Coaxi--kit, you eliminate separate stocks of complete connectors with different body styles and cable attachments, limiting the risk to run out of stock. " Main performance characteristics These connectors have the same performances as standard ones, except that the frequency ranges are: -- for flexible cables, from DC to 2.5 GHz, -- for corrugated cables, DC--11 GHz: N series and DC--7.5 GHz: 7/16 series. Coaxi--kit with EZ fit cable attachment features a typical intermodulation value of --110 dBm. " The product range D Heads: -- 7/16 series: plug and flange jack -- N series: plug, flange jack and bulkhead jack D Tips (cable attachment): -- Crimp or clamp type on flexible cables (RG 58, RG 142, RG 213 or RG 214) -- EZ fit type on super flexible corrugated cables (1/4", 3/8" or 1/2") D All tips and heads are packaged by 20 pieces. 25 N 50 8 COAXI--KIT Heads for COAXI-KIT Fig. 1 Fig. 2 Fig. 3 fig. captured center contact R161 901 120 1 YES R161 912 120 2 YES P01 Panel flange jack R161 913 120 3 YES P10 Panel bulkhead jack part number panel note Plug / tool R282 303 020 page 58 Tips for COAXI-KIT Fig. 1 Fig. 2 Fig. 4 Fig. 3 cable bl group partt number b Fig Fig. 5 / 50 / S + D R280 008 030 1 dimensions (mm) A B C mounting ti fi i h finish note t M28 Clamp type 5 / 50 / S R280 651 030 4 24 3.1 5.41 M27 Crimp type 5 / 50 / D R280 651 230 4 24 3.1 5.8 M27 Crimp type 21.5 7.46 11.05 M27 Crimp type 10 / 50 / S R280 663 030 4 10 + 11 / 50 / S + D R280 017 030 2 10 + 11 / 50 / D R280 664 030 4 21.5 7.46 11.4 M27 Crimp type, RG393 1/4" superflexible corrugated R280 021 200 3 41.7 4.7 7.95 M30 EZ fit type 1/2" superflexible corrugated R280 022 200 3 41.7 8.8 14 M30 EZ fit type 3/8" superflexible corrugated R280 023 200 3 42.2 7.1 11 M30 EZ fit type M29 Silver + BBR Clamp type Note : standard packaging = 20 pieces. For unit packaging, add "W" after the P/N. 26