COAXI--KIT
"
""
"Concept
You can mount any tip ( cable attachment ) with any head ( interface ) either in a straight or right angle configuration.
Head + tip = Straight or R/A
"
""
"Advantages of flexibility
A lot of combinations are possible by screwing the chosen tips and heads together since any tip is intermateable with any
head.
During base station installation, you may need, in a field situation, to change the configuration at the last minute:
DWith the same head interface, the Coaxi--kit connector can be mounted either in a straight or a right angle position.
It can be useful when the cable assembly is too short to be connected in a straight position. Using a Coaxi--kit, the
existing cable assembly can be utilized by orienting the head to a right angle position, eliminating the need for a new
cable assembly with a right angle connector.
DOne head can be used for all the different cables from a 5 mm flexible cable size to a 1/2 inch corrugated cable!
DThe same tip can be used for all the different interfaces of the BTS equipment which are supplied with 7/16 or N depend-
ing on the power transmitted, or manufacturer options.
"
""
"Advantages of cost saving
DBy managing a lower number of P/N’s you’re making cost savings in qualification, purchasing, and inventory. For exam-
ple, Radiall’s full range represents 14 P/N ( 5 heads & 9 tips ) which are equivalent to 90 connector combinations (near
7 times more ! ). The other advantage is the increase of volume by P/N which gives lower cost.
DCompared to a standard right angle connector, Coaxi--kit connectors use a simpler design. Including the price of the
head & the tip, Coaxi--kit is a low cost right angle connector.
"
""
"Less stock
DBy purchasing a Coaxi--kit, you eliminate separate stocks of complete connectors with different body styles and cable
attachments, limiting the risk to run out of stock.
"
""
"Main performance characteristics
These connectors have the same performances as standard ones, except that the frequency ranges are:
-- for flexible cables, from DC to 2.5 GHz,
-- for corrugated cables, DC--11 GHz: N series and DC--7.5 GHz: 7/16 series.
Coaxi--kit with EZ fit cable attachment features a typical intermodulation value of --110 dBm.
"
""
"The product range
DHeads:
-- 7/16 series: plug and flange jack
-- N series: plug, flange jack and bulkhead jack
DTips (cable attachment):
-- Crimp or clamp type on flexible cables (RG 58, RG 142, RG 213 or RG 214)
-- EZ fit type on super flexible corrugated cables (1/4”, 3/8” or 1/2”)
DAll tips and heads are packaged by 20 pieces.
N508
25
Fig. 1 Fig. 3Fig. 2
Fig. 1 Fig. 2
Fig. 3 Fig. 4
COAXI--KIT
N508
26
Heads for COAXI-KIT
part number fig. captured
center contact panel note
R161 901 120 1 YES Plug / tool R282 303 020 page 58
R161 912 120 2 YES P01 Panel flange jack
R161 913 120 3 YES P10 Panel bulkhead jack
Tips for COAXI-KIT
b
l
t
b
F
i
g
dimensions (mm)
t
i
f
i
i
h
t
cable group part number Fig. A B C mounting finish note
5/50/S+D R280 008 030 1M28 Clamp type
5/50/S R280 651 030 424 3.1 5.41 M27 Crimp type
5/50/D R280 651 230 424 3.1 5.8 M27 Crimp type
10 / 50 / S R280 663 030 421.5 7.46 11.05 M27 Crimp type
10 + 11 / 50 / S + D R280 017 030 2M29 Silver + BBR Clamp type
10 + 11 / 50 / D R280 664 030 421.5 7.46 11.4 M27 Crimp type, RG393
1/4” superflexible corrugated R280 021 200 341.7 4.7 7.95 M30 EZ fit type
1/2” superflexible corrugated R280 022 200 341.7 8.8 14 M30 EZ fit type
3/8” superflexible corrugated R280 023 200 342.2 7.1 11 M30 EZ fit type
Note : standard packaging = 20 pieces. For unit packaging, add ”W” after the P/N.
