Preliminary Datasheet AP1117M AP2317 AZ1117B 600mA LOW DROPOUT LINEAR REGULATOR 800mA LOW DROPOUT LINEAR REGULATOR General Description Features The AZ1117B is a low dropout three-terminal regulator with a dropout of 1.2V at 800mA output current. * The AZ1117B has been optimized for low voltage where transient response and minimum input voltage are critical. It provides current limit and thermal shutdown. Its circuit includes a trimmed bandgap reference to assure output voltage accuracy to be within 1%. On-chip thermal shutdown provides protection against a combination of high current and ambient temperature that would create excessive junction temperature. * * Low Dropout Voltage: 1.2V at 800mA Output Current Output Noise from 10Hz to 10KHz: 0.003% PSRR at IOUT=300mA and f=120Hz: 70dB * * * Output Voltage Accuracy: 1% On-chip Thermal Shutdown Maximum Quiescent Current: IQMAX=6mA * Operation Junction Temperature: -20 to 105oC Applications The AZ1117B is available in 1.8V, 2.5V and 3.3V versions. The fixed versions integrate the adjust resistors. It is also available in an adjustable version which can set the output voltage with two external resistors. * * * * USB Device Add-on Card DVD Player PC Motherboard The AZ1117B is available in the industry-standard SOT-223 power package. SOT-223 Figure 1. Package Type of AZ1117B Mar. 2006 Rev. 1. 0 BCD Semiconductor Manufacturing Limited 1 Preliminary Datasheet AP1117M AP2317 AZ1117B 600mA LOW DROPOUT LINEAR REGULATOR 800mA LOW DROPOUT LINEAR REGULATOR Pin Configuration H Package (SOT-223) VOUT 3 INPUT 2 OUTPUT 1 ADJ/GND Figure 2. Pin Configuration of AZ1117B (Top View) Functional Block Diagram 3 Thermal Protection INPUT + 2 OUTPUT For Adjustable Output, disconnect A1 and A2, connect B For Fixed Output, connect A1 and A2, disconnect B A1 A2 1 ADJ/GND B Figure 3. Functional Block Diagram of AZ1117B Mar. 2006 Rev. 1. 0 BCD Semiconductor Manufacturing Limited 2 Preliminary Datasheet AP1117M AP2317 AZ1117B 600mA LOW DROPOUT LINEAR REGULATOR 800mA LOW DROPOUT LINEAR REGULATOR Ordering Information AZ1117B E1: Lead Free Circuit Type TR: Tape and Reel Package H: SOT-223 Package Temperature Range SOT-223 -20 to 105oC ADJ: Adjustable Output 1.8: Fixed Output 1.8V 2.5: Fixed Output 2.5V 3.3: Fixed Output 3.3V Part Number Marking ID Packing Type AZ1117BH-ADJTRE1 EH17K Tape & Reel AZ1117BH-1.8TRE1 EH17L Tape & Reel AZ1117BH-2.5TRE1 EH17N Tape & Reel AZ1117BH-3.3TRE1 EH17M Tape & Reel BCD Semiconductor's Pb-free products, as designated with "E1" suffix in the part number, are RoHS compliant. Mar. 2006 Rev. 1. 0 BCD Semiconductor Manufacturing Limited 3 Preliminary Datasheet AP1117M AP2317 AZ1117B 600mA LOW DROPOUT LINEAR REGULATOR 800mA LOW DROPOUT LINEAR REGULATOR Absolute Maximum Ratings (Note 1) Parameter Symbol Value Unit Input Voltage VIN 18 V TJ 150 o TSTG -65 to 150 o TLEAD 260 o Operating Junction Temperature Range Storage Temperature Range Lead Temperature (Soldering, 10sec) C C C Note 1: Stresses greater than those listed under "Absolute Maximum Ratings" may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated under "Recommended Operating Conditions" is not implied. Exposure to "Absolute Maximum Ratings" for extended periods may affect device reliability. Recommended Operating Conditions Parameter Symbol Input Voltage VIN Operating Junction Temperature Range TJ Min -20 Mar. 2006 Rev. 1. 0 Max Unit 12 V 105 oC BCD Semiconductor Manufacturing Limited 4 Preliminary Datasheet AP1117M AP2317 AZ1117B 600mA LOW DROPOUT LINEAR REGULATOR 800mA LOW DROPOUT LINEAR REGULATOR Electrical Characteristics AZ1117B-ADJ Electrical Characteristics Operating Conditions: VIN=VOUT+2V, IOUT=10mA, TJ=25oC, unless otherwise specified. (Pmaximum power dissipation). Limits appearing in Boldface type apply over the entire junction temperature range for operation, -20oC to 105oC. Parameter Reference Voltage Line Regulation Load Regulation Symbol VREF Conditions 10mAIOUT800mA, 1.5VVIN-VOUT10V VRLINE 1.5VVIN-VOUT 10V VRLOAD 10mAIOUT800mA Dropout Voltage VDROP Current Limit ILIMIT Min Typ Max 1.238 1.250 1.262 1.225 1.250 1.270 0.001 0.1 Unit V % 0.2 0.1 0.4 % 0.5 VREF=1%, IOUT=0.8A 0.85 Adjust Pin Current 1.2 1.3 V 1 1.15 A 60 120 A Adjust Pin Current Change 1.5V(VIN-VOUT)10V, 10mAIOUT800mA 0.2 5 A Minimum Load Current 1.5V(VIN-VOUT)10V 1.7 5 mA f=120Hz, COUT=22F (VIN-VOUT)=3V, IOUT=300mA 70 dB 0.5 % 0.003 % 160 oC 16 oC Ripple Rejection PSRR Temperature Stability RMS Output Noise (% of VOUT) TA=25oC, 10Hzf10KHz Thermal Shutdown Junction Temperature Thermal Shutdown Hysteresis Mar. 2006 Rev. 1. 0 BCD Semiconductor Manufacturing Limited 5 Preliminary Datasheet AP1117M AP2317 AZ1117B 600mA LOW DROPOUT LINEAR REGULATOR 800mA LOW DROPOUT LINEAR REGULATOR Electrical Characteristics (Continued) AZ1117B-1.8V Electrical Characteristics Operating Conditions: VIN=3.8V, IOUT=10mA, TJ=25oC, unless otherwise specified. (Pmaximum power dissipation). Limits appearing in Boldface type apply over the entire junction temperature range for operation, -20oC to 105oC. Parameter Output Voltage Line Regulation Load Regulation Conditions Symbol VOUT 10mAIOUT800mA, 3.8VVIN10V VRLINE 1.5VVIN-VOUT10V VRLOAD 10mAIOUT800mA Dropout Voltage VDROP Current Limit ILIMIT Quiescent Current IQ Ripple Rejection PSRR Min Typ Max 1.782 1.8 1.818 1.764 1.8 1.836 0.5 6 Unit V mV 10 2 10 mV 25 VOUT=1%, IOUT=0.8A 1.2 1.3 V 1 1.15 A IOUT=0 4 6 mA f=120Hz, COUT=22F (VIN-VOUT)=3V, IOUT=300mA 70 dB 0.5 % 0.003 % 160 oC 16 oC 0.85 Temperature Stability RMS Output Noise (% of VOUT) TA=25oC, 10Hzf10KHz Thermal Shutdown Junction Temperature Thermal Shutdown Hysteresis Mar. 2006 Rev. 1. 0 BCD Semiconductor Manufacturing Limited 6 Preliminary Datasheet AP1117M AP2317 AZ1117B 600mA LOW DROPOUT LINEAR REGULATOR 800mA LOW DROPOUT LINEAR REGULATOR Electrical Characteristics (Continued) AZ1117B-2.5V Electrical Characteristics Operating Conditions: VIN=4.5V, IOUT=10mA, TJ=25oC, unless otherwise specified. (Pmaximum power dissipation). Limits appearing in Boldface type apply over the entire junction temperature range for operation, -20oC to 105oC. Parameter Output Voltage Line Regulation Load Regulation Conditions Symbol VOUT 10mAIOUT800mA, 4.5VVIN10V VRLINE 1.5VVIN-VOUT10V VRLOAD 10mAIOUT800mA Dropout Voltage VDROP Current Limit ILIMIT Quiescent Current IQ Ripple Rejection PSRR Min Typ Max 2.475 2.5 2.525 2.455 2.5 2.545 0.5 6 Unit V mV 10 2 10 mV 25 VOUT=1%, IOUT=0.8A 1.2 1.3 V 1 1.15 A IOUT=0 4 6 mA f=120Hz, COUT=22F (VIN-VOUT)=3V, IOUT=300mA 70 dB 0.5 % 0.003 % 160 oC 16 oC 0.85 Temperature Stability RMS Output Noise (% of VOUT) TA=25oC, 10Hzf10KHz Thermal Shutdown Junction Temperature Thermal Shutdown Hysteresis Mar. 2006 Rev. 1. 0 BCD Semiconductor Manufacturing Limited 7 Preliminary Datasheet AP1117M AP2317 AZ1117B 600mA LOW DROPOUT LINEAR REGULATOR 800mA LOW DROPOUT LINEAR REGULATOR Electrical Characteristics (Continued) AZ1117B-3.3V Electrical Characteristics Operating Conditions: VIN=5.3V, IOUT=10mA, TJ=25oC, unless otherwise specified. (Pmaximum power dissipation). Limits appearing in Boldface type apply over the entire junction temperature range for operation, -20oC to 105oC. Parameter Output Voltage Line Regulation Load Regulation Conditions Symbol VOUT 10mAIOUT 800mA, 5.3VVIN10V VRLINE 1.5VVIN-VOUT10V VRLOAD 10mAIOUT800mA Dropout Voltage VDROP Current Limit ILIMIT Quiescent Current IQ Ripple Rejection PSRR Min Typ Max 3.267 3.3 3.333 3.235 3.3 3.365 0.5 6 Unit V mV 10 2 10 mV 25 VOUT=1%, IOUT=0.8A 1.2 1.3 V 1 1.15 A IOUT=0 4 6 mA f=120Hz, COUT=22F (VIN-VOUT)=3V, IOUT=300mA 70 dB 0.5 % 0.003 % 160 oC 16 oC 0.85 Temperature Stability RMS Output Noise (% of VOUT) TA=25oC, 10Hzf10KHz Thermal Shutdown Junction Temperature Thermal Shutdown Hysteresis Mar. 2006 Rev. 1. 0 BCD Semiconductor Manufacturing Limited 8 Preliminary Datasheet AP1117M AP2317 AZ1117B 600mA LOW DROPOUT LINEAR REGULATOR 800mA LOW DROPOUT LINEAR REGULATOR Typical Performance Characteristics 2.0 AZ1117B-2.5V VIN=4.5V 5 1.6 1.2 IOUT=1mA to 800mA Load Regulation (mV) Line Regulation (mV) 0 0.8 0.4 0.0 -0.4 -0.8 -5 -10 -15 -1.2 -1.6 -2.0 -20 -20 0 20 40 60 80 -20 100 0 20 40 60 80 100 o o Case Temperature ( C) Junction Temperature ( C) Figure 4. Line Regulation vs. Junction Temperature Figure 5. Load Regulation vs. Case Temperature 2.495 1.270 1.265 2.490 2.485 1.255 Output Voltage (V) Reference Voltage (V) 1.260 1.250 1.245 1.240 1.235 1.230 AZ1117B-ADJ VIN=4.8V IOUT=10mA 2.480 2.475 2.470 2.465 1.225 1.220 -20 0 20 40 60 80 2.460 -20 100 AZ1117B-2.5V VIN=4.5V 100mA 400mA 600mA 800mA 0 20 40 60 80 100 o Case Temperature ( C) o Junction Temperature ( C) Figure 7. Output Voltage vs. Case Temperature Figure 6. Reference Voltage vs. Junction Temperature Mar. 2006 Rev. 1. 0 BCD Semiconductor Manufacturing Limited 9 Preliminary Datasheet AP1117M AP2317 AZ1117B 600mA LOW DROPOUT LINEAR REGULATOR 800mA LOW DROPOUT LINEAR REGULATOR Typical Performance Characteristics (Continued) 100 3 80 Adjust Pin Current (A) Minimum Load Current (mA) 90 2 1 0 -1 70 60 50 40 30 20 AZ1117B-ADJ 10 -2 -20 0 20 40 60 80 0 -20 100 AZ1117B-ADJ VIN=4.8V IOUT=10mA 0 20 40 o Junction Temperature ( C) 80 100 o Figure 8. Minimum Load Current vs. Junction Temperature Figure 9. Adjust Pin Current vs. Junction Temperature 10 1.4 AZ1117B-2.5V VIN=4.5V 1.3 9 8 o -40 C o -25 C o 25 C o 100 C 1.2 Power Dissipation (W) Dropout Voltage (V) 60 Junction Temperature ( C) 1.1 1.0 7 6 5 4 3 2 0.9 1 0 -20 0.8 0 100 200 300 400 500 600 700 800 AZ1117B-2.5V In chamber, no heatsink 0 20 40 60 80 100 o Case Temperature ( C) Output Current (mA) Figure 11. Power Dissipation vs. Case Temperature Figure 10. Dropout Voltage vs. Output Current Mar. 2006 Rev. 1. 0 BCD Semiconductor Manufacturing Limited 10 Preliminary Datasheet AP1117M AP2317 AZ1117B 600mA LOW DROPOUT LINEAR REGULATOR 800mA LOW DROPOUT LINEAR REGULATOR Typical Performance Characteristics (Continued) VOUT VOUT IOUT=600mA IOUT=10mA VIN=4.8V Figure 12. Line Transient Response Figure 13. Load Transient Response 1.25 80 1.20 70 1.15 1.10 Current Limit (A) PSRR (dB) 60 50 40 30 20 10 10 100 1k 10k 1.05 1.00 0.95 0.90 0.85 AZ1117B-2.5V VIN=4.5V 0.80 VOUT=VOUT(nominal)x98% 0.75 -20 100k 0 20 40 60 80 100 o Case Temperature ( C) Frequency (Hz) Figure 14. PSRR vs. Frequency Figure 15. Current Limit vs. Case Temperature Mar. 2006 Rev. 1. 0 BCD Semiconductor Manufacturing Limited 11 Preliminary Datasheet AP1117M AP2317 AZ1117B 600mA LOW DROPOUT LINEAR REGULATOR 800mA LOW DROPOUT LINEAR REGULATOR Typical Performance Characteristics (Continued) 1.4 1.3 1.2 CIN=10F, COUT=22F 10 Stable Area ESR () Dropout Voltage (V) 100 AZ1117B-2.5V 100mA 400mA 600mA 800mA 1.1 1 1.0 0.1 0.9 0.8 -20 0.01 0 20 40 60 80 0 100 100 200 300 400 500 600 700 800 Output Current (mA) o Case Temperature ( C) Figure 17. ESR vs. Output Current Figure 16. Dropout Voltage vs. Case Temperature Mar. 2006 Rev. 1. 0 BCD Semiconductor Manufacturing Limited 12 Preliminary Datasheet AP1117M AP2317 AZ1117B 600mA LOW DROPOUT LINEAR REGULATOR 800mA LOW DROPOUT LINEAR REGULATOR Typical Applications VIN=11V 9V at 0.8A AZ1117B-ADJ 10F + VIN VOUT + 22F ADJ R1 124 R2 768 VIN=5.3V AZ1117B-3.3 10F + VIN VOUT=VREF * ( 1+R2/R1) + IADJ * R2 3.3V at 0.8A VOUT + 22F GND Figure 18. Typical Applications of AZ1117B Mar. 2006 Rev. 1. 0 BCD Semiconductor Manufacturing Limited 13 Preliminary Datasheet AP1117M AP2317 AZ1117B 600mA LOW DROPOUT LINEAR REGULATOR 800mA LOW DROPOUT LINEAR REGULATOR Mechanical Dimensions SOT-223 Unit: mm(inch) 6.300(0.248) 6.700(0.264) ) 0.250(0.010 ) 4 1 0.350(0.0 2.900(0.114) 3.100(0.122) 0.900(0.035) 3.700(0.146) 3.300(0.130) 7.300(0.287) 6.700(0.264) MIN 0.250(0.010) 1.750(0.069) TYP 2.300(0.091) 0.610(0.024) TYP 0.810(0.032) 4.500(0.177) 0 10 4.700(0.185) 0.020(0.001) 0.100(0.004) 1.500(0.059) 1.520(0.060) 1.700(0.067) 1.800(0.071) Mar. 2006 Rev. 1. 0 BCD Semiconductor Manufacturing Limited 14 http://www.bcdsemi.com IMPORTANT NOTICE BCD Semiconductor Manufacturing Limited reserves the right to make changes without further notice to any products or specifications herein. BCD Semiconductor Manufacturing Limited does not assume any responsibility for use of any its products for any particular purpose, nor does BCD Semiconductor Manufacturing Limited assume any liability arising out of the application or use of any its products or circuits. BCD Semiconductor Manufacturing Limited does not convey any license under its patent rights or other rights nor the rights of others. MAIN SITE BCD Semiconductor Manufacturing Limited BCD Semiconductor Manufacturing Limited - Wafer Fab Shanghai SIM-BCD Semiconductor Manufacturing Limited 800, Yi Shan Road, Shanghai 200233, China Tel: +86-21-6485 1491, Fax: +86-21-5450 0008 - IC Design Group Advanced Analog Circuits (Shanghai) Corporation 8F, Zone B, 900, Yi Shan Road, Shanghai 200233, China Tel: +86-21-6495 9539, Fax: +86-21-6485 9673 REGIONAL SALES OFFICE Shenzhen Office Shanghai SIM-BCD Semiconductor Manufacturing Co., Ltd. Shenzhen Office Advanced Analog Circuits (Shanghai) Corporation Shenzhen Office 27B, Tower C, 2070, Middle Shen Nan Road, Shenzhen 518031, China Tel: +86-755-8368 3987, Fax: +86-755-8368 3166 Taiwan Office BCD Semiconductor (Taiwan) Company Limited 4F, 298-1, Rui Guang Road, Nei-Hu District, Taipei, Taiwan Tel: +886-2-2656 2808, Fax: +886-2-2656 2806 USA Office BCD Semiconductor Corporation 3170 De La Cruz Blvd., Suite 105, Santa Clara, CA 95054-2411, U.S.A Tel: +1-408-988 6388, Fax: +1-408-988 6386