2362 SMD 2 FORM C REED RELAY 2362 Series SMD 2 Form C Reed Relay The 2362 is the Surface Mount version of Coto Technology's popular 2342 2 Form C Pico relay. The 2362 offers a proven reed design with longer life than competing 2 Form C EMR products. The 2362 is the ideal solution for automated test, instrumentation and telecommunication applications to increase system reliability and life. 2362 Series Features u 2 Form C Contacts u Hermetically Sealed Contacts u Long Life / High Reliability u Magnetically Shielding Steel Shell u Surface Mount Relay u RoHS compliant DIMENSIONS in Inches (Millimeters) RECOMMENDED LAND PATTERN DIMENSIONS PER IPC STANDARDS .700 (17.8) .500 (12.7) .300 (7.6) .100 (2.5) .080 (2.0) .110 (2.8) .190 (4.8) .030 (0.8) Max. Ordering Information Part Number 2362-XX-000 Coil Voltage 05=5 volts 12=12 volts 06222015 tel: (401) 943.2686 | fax: (401) 942.0920 MODEL NUMBER Parameters COIL SPECS. 2362 Test Conditions Nom. Coil Voltage Units 2 Form C VDC 5 12 +/- 10%, 25 C 175 1000 Operate Voltage Must Operate by VDC - Max. 3.8 9.0 Release Voltage Must Release by VDC - Min. 0.4 1.0 Switching Voltage Max DC/Peak AC Resist. Volts 100 Switching Current Max DC/Peak AC Resist. Amps 0.25 Carry Current Max DC/Peak AC Resist. Amps 0.5 Max DC/Peak AC Resist. Watts 3 Coil Resistance CONTACT RATINGS Contact Rating Signal Level 1.0V, 10mA x 10 Ops. 250 Static Contact Resistance (max. init.) 50mV, 10mA 0.200 Dynamic Contact Resistance (max. init.) 0.5V, 50mA at 100 Hz, 1.5 msec 0.250 Insulation Resistance (minimum) Between all Isolated Pins at 100V, 25C, 40% RH 109 Capacitance - Typical Across Open Contacts No Shield Shield Guarding pF pF 2.0 N/A Dielectric Strength (minimum) Between Contacts Contacts to Shield Contacts/Shield to Coil VDC/peak AC VDC/peak AC VDC/peak AC 200 N/A 1000 Operate Time including bounce - Typical At Nominal Coil Voltage, 30 Hz Square Wave msec. 1.5 msec. 2.0 Life Expectancy-Typical 1 6 RELAY SPECIFICATIONS Release Time - Typical Top View: Dot stamped on top of relay refers to pin #1 location Grid = .1"x.1" (2.54mm x 2.54mm) 5 6 4 3 7 8 2 1 Notes: 1 Consult factory for life expectancy at other switching loads. Environmental Ratings: Storage Temp: -35C to +100C; Operating Temp: -20C to +85C Max Relay Temp During Solder Reflow Process: 260C for 1 minute maximum All electrical parameters measured at 25C unless otherwise specified. Vibration: 20 G's to 2000 Hz; Shock: 50 G's 06222015 For most recent data visit www.cotorelay.com COTO TECHNOLOGY, INC.