Is Now Part of To learn more about ON Semiconductor, please visit our website at www.onsemi.com Please note: As part of the Fairchild Semiconductor integration, some of the Fairchild orderable part numbers will need to change in order to meet ON Semiconductor's system requirements. Since the ON Semiconductor product management systems do not have the ability to manage part nomenclature that utilizes an underscore (_), the underscore (_) in the Fairchild part numbers will be changed to a dash (-). This document may contain device numbers with an underscore (_). Please check the ON Semiconductor website to verify the updated device numbers. The most current and up-to-date ordering information can be found at www.onsemi.com. Please email any questions regarding the system integration to Fairchild_questions@onsemi.com. ON Semiconductor and the ON Semiconductor logo are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries. ON Semiconductor owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of ON Semiconductor's product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent-Marking.pdf. ON Semiconductor reserves the right to make changes without further notice to any products herein. ON Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. Buyer is responsible for its products and applications using ON Semiconductor products, including compliance with all laws, regulations and safety requirements or standards, regardless of any support or applications information provided by ON Semiconductor. "Typical" parameters which may be provided in ON Semiconductor data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including "Typicals" must be validated for each customer application by customer's technical experts. ON Semiconductor does not convey any license under its patent rights nor the rights of others. ON Semiconductor products are not designed, intended, or authorized for use as a critical component in life support systems or any FDA Class 3 medical devices or medical devices with a same or similar classification in a foreign jurisdiction or any devices intended for implantation in the human body. Should Buyer purchase or use ON Semiconductor products for any such unintended or unauthorized application, Buyer shall indemnify and hold ON Semiconductor and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that ON Semiconductor was negligent regarding the design or manufacture of the part. ON Semiconductor is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. 74VHC32 Quad 2-Input OR Gate Features General Description High Speed: tPD = 3.8ns (typ.) at VCC = 5V Low Power Dissipation: ICC = 2 A (max.) at TA = 25C The VHC32 is an advanced high speed CMOS 2-Input OR Gate fabricated with silicon gate CMOS technology. It achieves the high speed operation similar to equivalent Bipolar Schottky TTL while maintaining the CMOS low power dissipation. High Noise Immunity: VNIH = VNIL = 28% VCC (min.) Power down protection is provided on all inputs Low Noise: VOLP = 0.8V (max.) Pin and Function Compatible with 74HC32 The internal circuit is composed of 4 stages including buffer output, which provide high noise immunity and stable output. An input protection circuit ensures that 0V to 7V can be applied to the input pins without regard to the supply voltage. This device can be used to interface 5V to 3V systems and two supply systems such as battery back up. This circuit prevents device destruction due to mismatched supply and input voltages. Ordering Information Order Number Package Number Package Description 74VHC32M M14A 14-Lead Small Outline Integrated Circuit (SOIC), JEDEC MS-012, 0.150" Narrow 74VHC32SJ M14D 14-Lead Small Outline Package (SOP), EIAJ TYPE II, 5.3mm Wide 74VHC32MTC 74VHC32N MTC14 N14A 14-Lead Thin Shrink Small Outline Package (TSSOP), JEDEC MO-153, 4.4mm Wide 14-Lead Plastic Dual-In-Line Package (PDIP), JEDEC MS-001, 0.300" Wide Device also available in Tape and Reel. Specify by appending suffix letter "X" to the ordering number. All packages are lead free per JEDEC: J-STD-020B standard. (c)1992 Fairchild Semiconductor Corporation 74VHC32 Rev. 1.3.0 www.fairchildsemi.com 74VHC32 -- Quad 2-Input OR Gate February 2008 74VHC32 -- Quad 2-Input OR Gate Connection Diagram Logic Symbol IEEE/IEC Pin Description Pin Names Truth Table Description An, Bn Inputs A B O On Outputs H H H L H H H L H L L L (c)1992 Fairchild Semiconductor Corporation 74VHC32 Rev. 1.3.0 www.fairchildsemi.com 2 Symbol Parameter Rating VCC Supply Voltage -0.5V to +7.0V VIN DC Input Voltage -0.5V to +7.0V VOUT DC Output Voltage -0.5V to VCC + 0.5V IIK Input Diode Current -20mA IOK Output Diode Current 20mA IOUT DC Output Current 25mA ICC DC VCC / GND Current TSTG Storage Temperature TL 50mA -65C to +150C Lead Temperature (Soldering, 10 seconds) 260C Recommended Operating Conditions(1) The Recommended Operating Conditions table defines the conditions for actual device operation. Recommended operating conditions are specified to ensure optimal performance to the datasheet specifications. Fairchild does not recommend exceeding them or designing to absolute maximum ratings. Symbol Parameter VCC Supply Voltage VIN Input Voltage VOUT Output Voltage TOPR Operating Temperature tr , tf Rating 2.0V to +5.5V 0V to +5.5V 0V to VCC -40C to +85C Input Rise and Fall Time, VCC = 3.3V 0.3V VCC = 5.0V 0.5V 0ns/V 100ns/V 0ns/V 20ns/V Note: 1. Unused inputs must be held HIGH or LOW. They may not float. (c)1992 Fairchild Semiconductor Corporation 74VHC32 Rev. 1.3.0 www.fairchildsemi.com 3 74VHC32 -- Quad 2-Input OR Gate Absolute Maximum Ratings Stresses exceeding the absolute maximum ratings may damage the device. The device may not function or be operable above the recommended operating conditions and stressing the parts to these levels is not recommended. In addition, extended exposure to stresses above the recommended operating conditions may affect device reliability. The absolute maximum ratings are stress ratings only. TA = -40C to +85C TA = 25C Symbol Parameter VCC (V) VIH HIGH Level Input Voltage 2.0 Conditions Min. 1.50 3.0-5.5 0.7 x VCC VIL LOW Level Input Voltage VOH HIGH Level Output Voltage 3.0 LOW Level Output Voltage Min. IOH = -50A 2.0 1.9 2.9 3.0 2.9 4.4 4.5 4.4 IOH = -4mA 2.58 2.48 IOH = -8mA 3.94 3.80 VIN = VIH or VIL IOL = 50A 4.5 3.0 4.5 IOL = 8mA V 0.0 0.1 0.1 0.0 0.1 0.1 0.0 IOL = 4mA V 0.3 x VCC 1.9 4.5 3.0 V 0.50 0.3 x VCC VIN = VIH or VIL Units 0.7 x VCC 3.0 2.0 Max. 0.50 3.0-5.5 2.0 Max. 1.50 2.0 4.5 VOL Typ. 0.1 0.1 0.36 0.44 V 0.36 0.44 IIN Input Leakage Current 0-5.5 VIN = 5.5V or GND 0.1 1.0 A ICC Quiescent Supply Current 5.5 VIN = VCC or GND 2.0 20.0 A Noise Characteristics TA = 25C Symbol Parameter VCC (V) Conditions Typ. Limits Units Quiet Output Maximum Dynamic VOL 5.0 CL = 50pF 0.3 0.8 V VOLV(2) Quiet Output Minimum Dynamic VOL 5.0 CL = 50pF -0.3 -0.8 V VIHD(2) Minimum HIGH Level Dynamic Input Voltage 5.0 CL = 50pF 3.5 V VILD(2) Maximum LOW Level Dynamic Input Voltage 5.0 CL = 50pF 1.5 V VOLP (2) Note: 2. Parameter guaranteed by design. (c)1992 Fairchild Semiconductor Corporation 74VHC32 Rev. 1.3.0 www.fairchildsemi.com 4 74VHC32 -- Quad 2-Input OR Gate DC Electrical Characteristics TA = -40C to +85C TA = 25C Symbol tPHL, tPLH Parameter Propagation Delay VCC (V) Conditions 3.3 0.3 5.0 0.5 CIN Input Capacitance CPD Power Dissipation Capacitance Typ. Max. Min. Max. Units CL = 15pF 5.5 7.9 1.0 9.5 ns CL = 50pF 8.0 11.4 1.0 13.0 CL = 15pF 3.8 5.5 1.0 6.5 CL = 50pF 5.3 7.5 1.0 8.5 4 10 VCC (3) = Open Min. 10 14 ns pF pF Note: 3. CPD is defined as the value of the internal equivalent capacitance which is calculated from the operating current consumption without load. Average operating current can be obtained by the equation: ICC (opr.) = CPD * VCC * fIN + ICC / 4 (per gate). (c)1992 Fairchild Semiconductor Corporation 74VHC32 Rev. 1.3.0 www.fairchildsemi.com 5 74VHC32 -- Quad 2-Input OR Gate AC Electrical Characteristics 0.65 A 0.43TYP 14 8 B 6.4 6.10 3.2 1 PIN#1 IDENT 0.2 C B A 7 TOP VIEW 1.65 ALL LEAD TIPS 0.45 RECOMMENDED LAND PATTERN 1.2 MAX 0.30 0.19 ALL LEAD TIPS 0.1 C 0.65 SEE DETAIL A 0.90+0.15 -0.10 0.13 A B 0.20 0.09 C C FRONT VIEW 0.09 MIN NOTES: A. CONFORMS TO JEDEC REGISTRATION MO-153, VARIATION AB, REF NOTE 6 B. DIMENSIONS ARE IN MILLIMETERS. C. DIMENSIONS ARE EXCLUSIVE OF BURRS, MOLD FLASH, AND TIE BAR EXTRUSIONS D. DIMENSIONING AND TOLERANCES PER ANSI Y14.5M, 2009. E. LANDPATTERN STANDARD: SOP65P640X110-14M. F. DRAWING FILE NAME: MKT-MTC14rev7. GAGE PLANE 0.09 MIN 1.00 0.25 SEATING PLANE DETAIL A 8.75 8.50 A 7.62 14 8 14 B 0.65 8 4.00 3.80 6.00 1 PIN #1 IDENT. 1.27 (0.33) TOP VIEW 5.60 7 0.51 0.35 0.25 M C B A 1.75 MAX 1.70 1 1.27 LAND PATTERN RECOMMENDATION A C 1.50 1.25 FRONT VIEW 0.25 0.10 0.50 0.25 x 45 R0.10 GAGE PLANE R0.10 0.36 8 0 0.90 0.50 (1.04) 0.10 C 0.25 0.19 SIDE VIEW NOTES: A. CONFORMS TO JEDEC MS-012, VARIATION AB, ISSUE C B. ALL DIMENSIONS ARE IN MILLIMETERS C. DIMENSIONS DO NOT INCLUDE MOLD FLASH OR BURRS D. LAND PATTERN STANDARD: SOIC127P600X145-14M E. CONFORMS TO ASME Y14.5M, 2009 D. DRAWING FILENAME: MKT-M14Arev14 SEATING PLANE DETAIL A SCALE 16 : 1 7 ON Semiconductor and are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries. ON Semiconductor owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of ON Semiconductor's product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent-Marking.pdf. ON Semiconductor reserves the right to make changes without further notice to any products herein. ON Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. Buyer is responsible for its products and applications using ON Semiconductor products, including compliance with all laws, regulations and safety requirements or standards, regardless of any support or applications information provided by ON Semiconductor. "Typical" parameters which may be provided in ON Semiconductor data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including "Typicals" must be validated for each customer application by customer's technical experts. ON Semiconductor does not convey any license under its patent rights nor the rights of others. ON Semiconductor products are not designed, intended, or authorized for use as a critical component in life support systems or any FDA Class 3 medical devices or medical devices with a same or similar classification in a foreign jurisdiction or any devices intended for implantation in the human body. Should Buyer purchase or use ON Semiconductor products for any such unintended or unauthorized application, Buyer shall indemnify and hold ON Semiconductor and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that ON Semiconductor was negligent regarding the design or manufacture of the part. ON Semiconductor is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. PUBLICATION ORDERING INFORMATION LITERATURE FULFILLMENT: Literature Distribution Center for ON Semiconductor 19521 E. 32nd Pkwy, Aurora, Colorado 80011 USA Phone: 303-675-2175 or 800-344-3860 Toll Free USA/Canada Fax: 303-675-2176 or 800-344-3867 Toll Free USA/Canada Email: orderlit@onsemi.com (c) Semiconductor Components Industries, LLC N. American Technical Support: 800-282-9855 Toll Free USA/Canada Europe, Middle East and Africa Technical Support: Phone: 421 33 790 2910 Japan Customer Focus Center Phone: 81-3-5817-1050 www.onsemi.com 1 ON Semiconductor Website: www.onsemi.com Order Literature: http://www.onsemi.com/orderlit For additional information, please contact your local Sales Representative www.onsemi.com