Clamp-type test probes IEC 60947-5-2 Product description Clamp-type test probes provide the simple, rapid measurement of voltages. A variety of types and sizes permit the measuring point to be accessed and gripped without difficulty. The ergonomic design has been optimised to facilitate handling to the utmost extent. The KLEPS 2700 permits a lead to be tested without the insulation being stripped. The KLEPS 2800 is provided with claw-type clamps with which large o2 57.5 35 System *Article type .64 o 1.4 1.6 3.6 Clamping 931 467-100 range max. o 2 mm, 931 467-101 contact hook, solder contact 3.8 3.5 Order no. Colour 24 Technical Data 53.8 System *Article type test specimens can be gripped. It is also suitable for testing currents. The classic KLEPS 30, used in millions of applications worldwide, serves as a versatile voltage tap. Technical Data Order no. Colour Very thin wires and densely packed contact points, clamping range o 2 mm 973 972-100 Very thin wires and densely packed contact points, clamping range o 3.5 mm 973 592-100 Very thin wires and densely packed contact points, clamping range o 3.5 mm 973 649-100 Clamping range o 4 mm 930 113-100 973 972-101 o 7.5 o 11 18 MICRO-KLEPS .64 o 2.3 2 o3 o 0. 64 66 o 2mm Steckerstift 35 3.5 o2 4 973 501-100 Clamping range max. 973 501-101 o 2 mm, contact hook 3.8 24 2 52 KLEPS 2 o7 o 11 14.5 20 A 930 111-100 clamping range max. 930 111-101 o 2 mm o 4.5 o 2.3 2 o3 52 o 4 128.5 3.8 77 3.4 .64 4 4 18 KLEPS 3 ST 24 KLEPS 2-BU 973 592-101 973 649-101 o7 39.5 972 309-100 4 o 4.1 3.5 972 309-101 930 113-101 8 o 4 o 4 Griffbereich 41 36.5 20 A clamping range 5.5 mm 158 5.5 4.3 126 o 18 KLEPS 4 100 KLEPS 10 KLEPS 2900 * System: 8 .64 = 0.64 mm system / Measuring Highlights KLEPS 30 2 =^ 2 mm system / 4 =^ 4 mm system / 39.5 =^ 4 mm safety system / =^ 4 mm sliding sleeve system