Detection with Increased Reliability Special-beam Models P10 A variety of heads incorporating the latest optical technology makes it possible to solve common problems related to detection and to increase reliability. Resistant to dust and dirt Capable of detecting small workpieces Resistant to workpiece vibration Use these models to handle unstable detection conditions. Environmentresistive Models Small-spot models E32-C42+ E39-F3A Area-sensing models E32-T16J Limited-reflective models High-power models E32-T17L E32-L24L High Resistance to External Conditions with Fiber P14 We have developed model variations for adapting to a variety of environmental conditions. These models enable detection in high-temperature environments and vacuums. High-temperature environments Environments subject to the splattering of chemicals Vacuums Use these models to handle applications in special environments. Heat-resistant models Applicationcorresponding Models Chemical-resistant models Fiber Units for the Food-packaging, Semiconductor, and FPD Industries P16 These models, which were developed for specific applications, offer top-quality detection performance. Label detection Liquid-level detection Alignment and mapping of glass substrates Wafer mapping Use these models for specific applications. Label-detection models Alignment-check models Liquid-level detection models E32-G14 E32-L16 E32-D36T Fiber Units with Reflective Sensors High-resolution mode Standard mode ( Type Appearance (mm) *3 High-speed mode *When used in combination with the E3X-DA-S Amplifier Unit (general-purpose). Super-high-speed mode) Sensing distance (mm) *1 Min. (Min. sensing bending object) (mm) *2 radius (mm) R25 Ultracompact, flat-view E32-L24S Heat resistant up to 105C *4, top-view E32-L24L 5.4 to 9 (center: 7.2) 5.4 to 9 (center: 7.2) 5.4 to 9 (5.4 to 9) (center: 7.2) Heat resistant up to 105C *4, top-view E32-L25L 4 to 10 4 to 10 4 to 10 (4 to 10) Heat resistant up to 200C, flat- E32-L86 view (0.005 dia.) R10 R25 Wide-range sensing, flatview E32-L16 R35 Heat resistant up to 150C E32-D51 R10 Heat resistant up to 200C E32-D81R-S E32-D81R Heat resistant up to 350C E32-D61-S E32-D61 Heat resistant up to 400C, with sleeve E32-D73-S E32-D73 0 to 15 0 to 15 0 to 12 (0 to 12) Heat-resistant 200C*6 M6 350C*6 400 230 160 (72) 150 90 60 (27) (0.005 dia.) M6 R25 400C*6 Chemical-resistant Environment-resistive models M6 M4 1.25 dia. Min. bending radius of sleeve: 10 6 dia. 100 60 40 (18) 160 95 65 (30) Fluororesin covE32-D12F er, long distance (0.005 dia.) 7 dia. Small level differences, high E32-L25 power, side-view E32-L25A 2 to 6 (center: 4) 2 to 6 (center: 4) 2 to 6 (2 to 6) (center: 4) 150C*5 Model number Small level differences, topview 0 to 4 0 to 4 0 to 4 (0 to 4) Convergent-reflective Special-beam models 3.3 3.3 3.3 (3.3) Features 70 40 30 (10) R40 Fluororesin covE32-D14F er, side-view *1. The sensing distances are for white paper. *2. The values for the minimum sensing object are representative values that indicate values obtained in standard mode with the sensing distance and sensitivity set to optimum values. *3. Indicates models that allow free cutting. *4. For continuous operation, use the products within a temperature range of -40C to 90C. *5. For continuous operation, use the products within a temperature range of -40C to 130C. *6. The maximum temperature that can be withstood varies with the location 29 Fiber Units Environment-resistive models Type Heat-resistant Item E32-T5@ E32-D5@ Ambient operating -40C to 150C *4 temperature range *1 Ambient humidity 35% to 85% range *1 Plastic Fiber material (fluororesin coating) E32-T8@R-S E32-D8@R-S E32-T6@-S E32-D6@-S E32-T84S-S -40C to 200C *3 Glass (fluororesin coating) -60C to 350C *3 E32-D73-S -40C to 400C *3 Glass (SUS spiral coating) Degree of protection IEC standard: IP67 Environment-resistive models Type Item Chemical-resistant All other models Ambient operating -40C to 70C temperature range *1 Ambient humidity 35% to 85% range *1 Fiber material E32-T51F Vacuum-resistant E32-T81F-S -40C to 150C *4 Plastic (fluororesin coating) All other models -40C to 200C *3 -25C to 120C -25C to 200C Glass (fluororesin coating) Glass (fluororesin coating) Glass (SUS spiral coating) Degree of protection IEC standard: IP67 --Application-corresponding models Type Liquid-level detection Item Label-detection All other models E32-A01 E32-A02 Ambient operating -40C to 70C temperature range *1 Ambient humidity 35% to 85% range *1 Fiber material Other Wafer-mapping E32-D82F -40C to 200C *3 -40C to 70C (Fluororesin coating) Plastic (polyethylene coating) IEC standard: IP50 IEC standard: IP68 IEC standard: IP50 Repeat accuracy: 1 mm max. Repeat accuracy: 0.5 mm max. Plastic (fluororesin coating) Plastic (polyethylene coating) Degree of protection IEC standard: IP67 Application-corresponding models Type Item 32-T84SV Glass-substrate-alignment All other models E32-L66 Ambient operating -40C to 70C 0C to 300C *3, *5 temperature range *1 Ambient humidity 35% to 85% range *1 Glass Plastic Fiber material (polyethylene coating) (SUS spiral coating) Glass-substrate-mapping E32-A09 -40C to 70C E32-A09H -40C to 150C *4 Plastic Plastic (polyethylene coating) (fluororesin coating) E32-A09H2 -40C to 300C *3 Glass (SUS spiral coating) Degree of protection IEC standard: IP40 *1. *2. *3. *4. *5. There must be no icing or condensation within the range specified for the ambient operating temperature. For continuous operation, use the products within a temperature range of -40C to 90C. The maximum temperature that can be withstood varies with the location. Refer to dimensions diagrams for details. For continuous operation, use the products within a temperature range of -40C to 130C. These values are based on the assumption that there are no repeated sudden changes in temperature. 35 Fiber Units with Reflective Sensors Convergent-reflective Models Indicates models that allow free cutting. E32-L86 A B 2,000 33.5 19 11 7 Optical axis Two, 4 dia. Note: The maximum allowable temperatures for sections A and B are 200C and 110C, respectively. The section inserted into the Amplifier Unit (indicated by *2), however, must stay within the Amplifier Unit's operating temperature range. 25 5 (max.) 13 *2 18 8.9 27 4 dia. Two, 3.2-dia. holes with 6-dia. countersinks on one side 5.5 Sensing head (stainless steel) Flexible tube: 2.8 dia.*1 *1 Material: Stainless steel Heat-resistant Models E32-D51 Two hexagonal nuts Two toothed washers Sensing head: M6 x 0.75* Two, 1.5 dia. Optical fiber: Two, 2.2 dia. 4.9 3.1 2.4 3 10 13 17 2,000 *Material: Brass/nickel plating Note: The maximum allowable temperature is 150C. The maximum allowable temperature for continuous operation is 130C. E32-D81R-S E32-D81R Using the E32-D81R-S Two toothed washers (SUS) Two hexagonal nuts (SUS) Sensing head: M6 x 0.75 *1 SUS flexible tube Protective tube (gray) (4.2 dia.) 5 dia. Fiber: 1.2 dia. M4 x 0.7 Using the E32-D81R SUS303 2.2 dia. Sleeve 5 dia. 4.5 8.5 8 15 3 2 3 Note 1. The maximum allowable temperatures for sections A and B are 200C and 110C, respectively. The section inserted into the Amplifier Unit (indicated by *2), however, must stay within the Amplifier Unit's operating temperature range. 2.2 dia. Sleeve 11.5 15 B 5 (70) 5 20 2,000 5 10 *2 6.5 5 6.4 13 *2 16.5 B A *1. Material: Stainless steel (SUS303) E32-D61-S E32-D61 Using the E32-D61-S 1.4 dia. M4 x 0.7 Two hexagonal nuts Two toothed washers Sensing head: M6 x 0.75 *1 5 dia. *3 3.5 dia. Using the E32-D61 Hexagonal caulking 5 dia. 2.2 dia. Sleeve 5 dia. SUS316L Sleeve 4.5 8.5 10 3 2 20 2.4 3 5 2,000 5 *4 Note 1. The maximum allowable temperatures for sections A and B are 350C and 110C, respectively. The section inserted into the Amplifier Unit (indicated by *2), however, must stay within the Amplifier Unit's operating temperature range. SUS flexible tube 11.5 15 A 8 5 10 *2 5 B 16.5 *2 13 6.5 15 6.4 B *1. Material: Stainless steel (SUS303) *3. The diameter is 6 if the fiber length exceeds 10 m. *4. The diameter is 10 if the fiber length exceeds 10 m. E32-D73-S E32-D73 1 dia. Using the E32-D73-S Two hexagonal nuts Two toothed washers SUS flexible tube Sensing head: M4 x 0.7 *1 5 dia. 4 dia. 2.8 dia. Stainless-steel tube: 1.25 dia. 1.65 dia. 2.5 dia. Using the E32-D73 Hexagonal caulking 5 dia. 2.2 dia. Sleeve SUS316L Sleeve 4.5 8.5 7 5 5 2.4 5 60 20 10 2,000 A B 11.5 10 *2 5 15 8 5 16.5 C 6.5 *2 13 Note 1. The maximum allowable temperatures for sections A, B, and C are 400C, 300C, and 110C, respectively. The section inserted into the Amplifier Unit (indicated by *2), how15 ever, must stay within the Amplifier Unit's operating temperature range. 6.4 C *1. Material: Stainless steel (SUS303) Chemical-resistant Models E32-D14F E32-D12F 2,000 (26) Sensing head: 6 dia. Fluororesin 5 dia. Optical fiber: Two, 2.2 dia. 16 2,000 46 100 4.5 Optical Sensing head: 7 dia. axis Optical-axis mark 100 Fluororesin tube (protective cover) Optical fiber: 2.2 dia.