Q-SERIES Ø6mm Panel Mounting LED Indicator
Product Specification
7
www.apem.com
Q-SERIES 12mmØ Panel Mounting LED Indicator
Product Specification
25.2 to 30.8VDC
Intensity (Typical) at |op Standard Prominent Forward Voltage
(all voltages)
HE Red 100mcd 1.9V
Green 50mcd 2.2V
Yellow 50mcd 2.1V
Blue 500mcd 3.3V
White 350mcd 3.3V
Bi-colour (Typical) (Red/Green) 80/50mcd 2.0V/2.2V
Bi-colour - The colour is changed by reversing the polarity of the supply voltage.
Tri-colour versions are available upon request, please consult Apem.
Super Bright Prominent Forward Voltage
(all voltages)
HE Red 2,700mcd 1.9V
Green 4,200mcd 3.2V
Yellow 1,400mcd 2.1V
Blue 1,500mcd 3.6V
White 550mcd 3.3V
Luminous intensity will be reduced with lower operating current.
Max Reverse Voltage: 5V
Viewing Angle: 60°
Life Expectancy: 100,000 hours
Operating Temperature Range: –40 to +85°C
Note: The operating voltage must not be exceeded by more that 10% as this will result in reduced life expectancy.
The company reserves the right to change specifications without notice.
Distinctive Features and Specifications
• 12mmpanelmountingLEDindicator
• 8mmcoloureddiffusedepoxylensor8mmwaterclearsuperbrightLEDs
• Brightchrome,blackchromeorsatingreybezelfinish
• Prominentbezelstyle
• 2VDC–220VAC
• (2.8x0.8)terminals,pinsor(200mmlong)wireterminations
• IP67sealingoption(EN60529)
• Suppliedwithfixingnutandspringwasher
NB: UL Recognised Component
TECHNICAL SPECIFICATIONS
PANEL CUTOUT
Ø 12,00 ±0,1
Switch Voltage Operating Voltage Vop Operating Current |op
(Min to Max) (Typical All Types)
2VDC (No Resistor) 1.8 to 2.5VDC 20mA
12VDC 10.8 to 13.2VDC 20mA
24VDC 21.6 to 26.4VDC 20mA
28VDC 20mA
110VAC 99 to 121VAC 6mA
230VAC 207 to 253VAC 3mA
Q-SERIES
6mmØ Panel Mounting LED Indicator
8
www.apem.com
Q-SERIES 12mmØ Panel Mounting LED Indicator
Technical Drawings
PROMINENT BEZEL
Note: The company reserves the right to change specifications without notice.
WIRESPINSSOLDER LUG/FASTONS
±10
9
www.apem.com
Q-SERIES 12mmØ Panel Mounting LED Indicator
Order Overview
STANDARD OPTIONS
Q 12 P 1 B XX G 12 E
• GoldFastonterminaldenotesAnode(+),silverterminaldenotesCathode(-)
• Standardwirelengthis200mm,24AWG,redwiredenotesAnode(+),blackwiredenotesCathode(-)
for other wire lengths consult APEM
• ForLEDswithalternatevoltageconsultAPEM
• Bi-colourLEDs,byconnectingthegoldFaston(+)onecolourisproduced,
by reversing the supply voltage another colour is produced – Bi-colours are available up to 28VDC
• TakecarewhensolderingtotheFastonterminals
• Maxvoltageforpinsandwiresis28V
• Maximumpanelthickness7mm
• ForbehindpanelepoxysealedoptionspleaseconsultAPEM
• Tri-coloursareonlyavailablebehindpanelepoxysealedwithwiresorpins
• 110VACand220VAConlyavailablewithsolderlug/Fastonterminals
• WerecommendusingSuperbrightLEDsforuseat220VAC
• Forresistorlessversions(02)pleasepayattentiontotheforwardvoltage
Q
Example Q12P1BXXG12E
Ø12mm, prominent bezel, solder lug terminals,
black chrome finish, fixed light,
green, 12volt DC LED, IP67 Panel Seal
1 = Solder Lug/
Fastons
(2.0 x 0.8)
2 = Pins
3 = Wires
6 = Short body
Pins
7 = Short body
Wires
C = Bright Chrome
B = Black Chrome
G = Satin Grey
R = Red
G = Green
Y = Yellow
B = Blue
W = White
SR = Super Bright Red
SG = Super Bright Green
SY = Super Bright Yellow
SB = Super Bright Blue
SW = Super Bright White
RG = Red/Green
RY = Red/Yellow
GY = Green/Yellow
RYG = Red/Yellow/Green
02 = 2VDC
06 = 6VDC
12 = 12VDC
12A = 12VAC/DC
24 = 24VDC
24A = 24VAC/DC
28 = 28VDC
28A = 28VAC/DC
110 = 110VAC
220 = 220VAC
(Blank) = Unsealed
E = IP67
XX = Fixed Light
KK = Flashing Light
(only up to 28VDC)
YY = Bi-colour
ZZ = Tri-colour
SERIES MOUNTING
HOLE
12 = Ø12mm P = Prominent
BEZEL
STYLE TERMINALS BEZEL FINISH TYPE OF
ILLUMINATION LED COLOUR VOLTAGE SEALING
The Q12 Series is available with a range of standard options, to specify your LED, simply choose one option from each column.
An example is shown below.