47
23456
This is a thin, low-profile 2.0mm (.079")
pitch connector 7.5mm (.295") in height
after mounting and 4.5mm (.177") in width.
It is designed to meet the demand for
high-density connection of internal wires to
printed circuit boards. It is compact, highly
reliable and low in cost.
Features––––––––––––––––––––––––
• Reliable contact
The contact has long dimples near the center to ensure a good
connection at all times, even under conditions of vibration and
mechanical abuse, and when used with low voltage and low
current circuits.
• Fully shrouded header
The fully shrouded header has walls on all four sides to
prevent improper connection to the mating housing and to
prevent the instruction of flux and other contaminants.
• Printed circuit board retention mechanism
The solder side of the header has a retention mechanism that
prevents it from floating during soldering. As a result, the
header can be positioned accurately.
• Surface mount model (SMT)
This connector is also available in a surface mount
configuration. Its housing is made of heat resistant resin so
that it is not adversely affected during reflow soldering.
Because of its tiny size and ability to be surface mounted, this
connector meets the demand for high-density mounting of
components inside electronic products.
Specifications –––––––––––––––––––
• Current rating: 2A AC, DC (AWG #24)
• Voltage rating: 100V AC, DC
• Temperature range: -25˚C to +85˚C
(including temperature rise in applying
electrical current)
• Contact resistance: Initial value/10m Ωmax.
After environmental testing/20m Ωmax.
• Insulation resistance: 1,000M Ωmin.
• Withstanding voltage: 800V AC/minute
• Applicable wire: AWG #32 to #24
• Applicable PC board thickness: 0.8 to 1.6mm(.031" to .063")
* Contact JST if Lead-Free product is required.
* Refer to "General Instruction and Notice when using
Terminals and Connectors" at the end of this catalog.
* Contact JST for details.
Standards ––––––––––––––––––––––
0Recognized E60389
1Certified LR20812
2R75087
PH CONNECTOR
Disconnectable Crimp style connectors
2.0mm
(.079") pitch
Crimp
Emboss Tape
48
PH CONNECTOR
Note:
1. Contact JST for gold-plated contacts.
2. SPH-002T-P0.5L is low-insertion force type contact, for easier insertion/
withdrawal, which would be less resistant to the vibration. The crimp height is
different from the standard.
3. When using AWG#32 or #30 wires, reflow-treated headers
(Low insertion force type, Model No. B#B-PH-KL or S#B-PH-KL) are
recommendable.
4. Contact JST for details.
Contact –––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––
1.0
(.039)
2.08
(.082)
1.5
(.059)
5.7(.224)
2.85(.112)
2.05(.081)
Model No. Applicable wire
mm2AWG #
Insulation O.D. mm(in.)
Q'ty /
reel
Material and Finish
SPH-002T-P0.5S
SPH-002T-P0.5L
SPH-004T-P0.5S
0.05 to 0.22
0.08 to 0.22
0.032 to 0.08
30 to 24
28 to 24
32 to 28
0.9 to 1.5(.035 to .059)
0.8 to 1.5(.031 to .059)
0.5 to 0.9(.020 to .035)
Phosphor bronze, tin-plated
8,000
8,000
10,000
Housing –––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––
0.6(.024)
A
B
6.35(.250)
1.9
(.075) 2.0
(.079) 4.5(.177)
0.5
(.020)
Circuit
No.1
Cir-
cuits Model No. Dimensions mm(in.)
AB
Q'ty /
box
Material
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
PHR- 2
PHR- 3
PHR- 4
PHR- 5
PHR- 6
PHR- 7
PHR- 8
PHR- 9
PHR-10
PHR-11
PHR-12
PHR-13
PHR-14
PHR-15
PHR-16
2.0( .079)
4.0( .157)
6.0( .236)
8.0( .315)
10.0( .394)
12.0( .472)
14.0( .551)
16.0( .630)
18.0( .709)
20.0( .787)
22.0( .866)
24.0( .945)
26.0(1.024)
28.0(1.102)
30.0(1.181)
5.8( .228)
7.8( .307)
9.8( .386)
11.8( .465)
13.8( .543)
15.8( .622)
17.8( .701)
19.8( .780)
21.8( .858)
23.8( .937)
25.8(1.016)
27.8(1.094)
29.8(1.173)
31.8(1.252)
33.8(1.331)
1,000
1,000
1,000
1,000
1,000
1,000
1,000
1,000
1,000
1,000
1,000
1,000
1,000
1,000
1,000
Nylon 66, UL94V-0, natural (white)
<For reference> As the color identification,
the following alphabet shall be put in the underlined part.
For availability, delivery and minimum order quantity, contact JST.
ex. PHR-2-oo-
(blank)…natural (white)
BK…black R…red TR…tomato red BL…blue Y…yellow
L…lemon yellow M…green D…orange N…brown
P…purple PK…pink H…gray LE…light blue
FY…vivid yellow
49
B
A
1.95
(.077)
4.5(.177)
1.7(.067)
6.0(.236)
3.4
(.134)
0.5
(.020)
Circuit
No.1
(.134)
3.4
B
A
1.95
(.077)
2.0
(.079) 0.5
(.020)
4.8(.189)
1.7(.067)
6.25(.246)
6.0(.236)
1.6
(.063)
Circuit
No.1
B
6.0(.236)(.134)
A
1.95
(.077)
2.0
(.079) 0.5
(.020)
3.4
4.5(.177)
1.7(.067)
Circuit
No.1
Through-hole type shrouded header –––––––––––––––––––––––––––––––––––––––––
Top
entry
type
Side
entry
type
Top
entry
type
Side
entry
type
Cir-
cuits
Model No. Dimensions mm(in.)
AB
Q'ty / box
Material and Finish
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
2.0( .079)
4.0( .157)
6.0( .236)
8.0( .315)
10.0( .394)
12.0( .472)
14.0( .551)
16.0( .630)
18.0( .709)
20.0( .787)
22.0( .866)
24.0( .945)
26.0(1.024)
28.0(1.102)
30.0(1.181)
5.9( .232)
7.9( .311)
9.9( .390)
11.9( .469)
13.9( .547)
15.9( .626)
17.9( .705)
19.9( .783)
21.9( .862)
23.9( .941)
25.9(1.020)
27.9(1.098)
29.9(1.177)
31.9(1.256)
33.9(1.335)
1,000
1,000
1,000
1,000
1,000
500
500
500
500
500
500
250
250
250
250
1,000
1,000
500
500
500
500
250
250
250
250
250
250
250
200
200
Post: Brass, copper-undercoated, tin/lead-plated
Wafer: Nylon 66, UL94V-0, natural (white)
S 2B-PH-K-S
S 3B-PH-K-S
S 4B-PH-K-S
S 5B-PH-K-S
S 6B-PH-K-S
S 7B-PH-K-S
S 8B-PH-K-S
S 9B-PH-K-S
S10B-PH-K-S
S11B-PH-K-S
S12B-PH-K-S
S13B-PH-K-S
S14B-PH-K-S
S15B-PH-K-S
S16B-PH-K-S
B 2B-PH-K-S
B 3B-PH-K-S
B 4B-PH-K-S
B 5B-PH-K-S
B 6B-PH-K-S
B 7B-PH-K-S
B 8B-PH-K-S
B 9B-PH-K-S
B10B-PH-K-S
B11B-PH-K-S
B12B-PH-K-S
B13B-PH-K-S
B14B-PH-K-S
B15B-PH-K-S
B16B-PH-K-S
The shrouded headers are interchangeable with those of the KR, KRD and CR insulation displacement connectors.
Top entry type
Side entry type
(2 circuits) (3 circuits or more)
PH CONNECTOR
<For reference> As the color identification,
the following alphabet shall be put in the underlined part.
For availability, delivery and minimum order quantity, contact JST.
ex. B2B-PH-K-oo-
S…natural (white)
K…black R…red TR…tomato red
E…blue Y…yellow L…lemon yellow M…green
O…orange N…brown P…purple PK…pink H…gray
LE…light blue FY…vivid yellow (blank)…ivory
50
PH CONNECTOR
Top
entry
type
Side
entry
type
Top
entry
type
Side
entry
type
Cir-
cuits
Model No. Dimensions mm(in.)
AB
Q'ty / box
Material and Finish
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
B 2B-PH-KL
B 3B-PH-KL
B 4B-PH-KL
B 5B-PH-KL
B 6B-PH-KL
B 7B-PH-KL
B 8B-PH-KL
B 9B-PH-KL
B10B-PH-KL
B11B-PH-KL
B12B-PH-KL
B13B-PH-KL
B14B-PH-KL
B15B-PH-KL
B16B-PH-KL
S 2B-PH-KL
S 3B-PH-KL
S 4B-PH-KL
S 5B-PH-KL
S 6B-PH-KL
S 7B-PH-KL
S 8B-PH-KL
S 9B-PH-KL
S10B-PH-KL
S11B-PH-KL
S12B-PH-KL
S13B-PH-KL
S14B-PH-KL
S15B-PH-KL
S16B-PH-KL
2.0( .079)
4.0( .157)
6.0( .236)
8.0( .315)
10.0( .394)
12.0( .472)
14.0( .551)
16.0( .630)
18.0( .709)
20.0( .787)
22.0( .866)
24.0( .945)
26.0(1.024)
28.0(1.102)
30.0(1.181)
5.9( .232)
7.9( .311)
9.9( .390)
11.9( .469)
13.9( .547)
15.9( .626)
17.9( .705)
19.9( .783)
21.9( .862)
23.9( .941)
25.9(1.020)
27.9(1.098)
29.9(1.177)
31.9(1.256)
33.9(1.335)
1,000
1,000
1,000
1,000
1,000
500
500
500
500
500
500
250
250
250
250
1,000
1,000
500
500
500
500
250
250
250
250
250
250
200
200
200
Post: Copper alloy, copper-undercoated, tin/lead-plated (reflow-treated)
Wafer: Nylon 66, UL94V-0, gray
B
A
1.95
(.077)
4.5(.177)
1.7(.067)
6.0(.236)
3.4
(.134)
0.5
(.020)
Circuit
No.1
(.134)
3.4
B
A
1.95
(.077)
2.0
(.079) 0.5
(.020)
4.8(.189)
1.7(.067)
6.25(.246)
6.0(.236)
1.6
(.063)
Circuit
No.1
B
6.0(.236)(.134)
A
1.95
(.077)
2.0
(.079) 0.5
(.020)
3.4
4.5(.177)
1.7(.067)
Circuit
No.1
Top entry type
Side entry type
(2 circuits) (3 circuits or more)
Through-hole type shrouded header <Low insertion force type> –––––––––––––––––
2.0±0.05
(.079±.002)
0.7+0.1
(.028+.004)dia.
0
0
4.5
(.177)
8.0(.315)
6.0(.236)
2.0±0.05
(.079±.002)
0.7+0.1
(.028+.004)dia.
0
0
7.6(.299)
9.6(.378)
4.8(.189)
6.25
(.246)
Through-hole type PC board layout (viewed from soldering side) and Assembly layout –––
Note:
1. Tolerances are non-cumulative:
±
0.05mm(
±
.002") for all centers.
2. Hole dimensions differ according to the kind of printed circuit board and piercing method. If printed circuit boards made of hard material are used,
the hole dimensions should be larger. The hole dimensions shown above are reference values.
Contact JST for details.
Top entry type Side entry type
<For reference> As the color identification,
the following alphabet shall be put in the underlined part.
For availability, delivery and minimum order quantity, contact JST.
ex. B2B-PH-KL-oo-
(blank)…gray
R…red E…blue S…natural (white)
51
SMT type shrouded header –––––––––––––––––––––––––––––––––––––––––––––––––
•
The shrouded headers are interchangeable with those of the KR, KRD and CR insulation displacement connectors.
•SMT type shrouded headers are not TU
¨V approved.
B
A
2.975
(.117) 2.0(.079)
5.0
(.197) [2.0
(.079)]
1.9(.075)
6.6(.260)
2.2
(.087)
1.4
(.055)
Circuit No.1
B
A
2.95
(.116)
2.0
(.079)
2.4(.094)
5.5(.217)
6.0(.236) (.063)
1.6 [2.6
(.102)]
SM3, SM4 type SM3 type
SM4 type
Side entry type
Top entry type
Note: Contact JST for the top entry type headers with suction cap.
Note: Contact JST for the top entry type headers with suction cap.
PH CONNECTOR
<For reference> As the color identification,
the following alphabet shall be put in the underlined part.
For availability, delivery and minimum order quantity, contact JST.
ex. B2B-PH-SM3-oo-TB
(blank)…natural (white)
R…red E…blue M…green L…lemon yellow K…black
52
PH CONNECTOR
Taping specifications ––––––––––––––––––––––––––––––––––––––––––––––––––––––
Feeding direction
(+.098
-.039
[13(.512)dia.] W1+2.5
-1.0 )
380±2.0(14.961± .079)dia.
2.0±0.5
(.079±.020)
F±0.1
(.004)
W±0.3(.012)
4.0±0.1
(.157±.004)
Feeding direction
1.75±0.1
(.069±.004)
2.0±0.1
(.079±.004)
1.55±0.05
(.061±.002)dia.
12.0
±
0.1
(.472±.004)
Cover tape
Carrier tape
4.0±0.1
(.157±.004) 2.0±0.1
(.079±.004)
12.0
±
0.1
(.472±.004)
Feeding direction
1.55±0.05
(.061±.002)dia.
F±0.1
(.004)
W±0.3(.012)
1.75±0.1
(.069±.004)
S±0.1(.004)
Cover tape
Carrier tape
F±0.1
(.004)
W±0.3(.012)
4.0±0.1
(.157±.004)
1.75±0.1
(.069±.004)
2.0±0.1
(.079±.004)
12.0
±
0.1
(.472±.004)
1.55±0.05
(.061±.002)dia.
Feeding direction
Cover tape
Carrier tape
4.0±0.1
(.157±.004) 2.0±0.1
(.079±.004)
12.0
±
0.1
(.472±.004)
Feeding direction
1.55±0.05
(.061±.002)dia.
F±0.1
(.004)
W±0.3(.012)
1.75±0.1
(.069±.004)
S±0.1(.004)
Carrier tape
Cover tape
Feeding direction
Cover tape leaderCarrier tape
The end
part 160
(6.299)min.
Connector
mounting part 400(15.748)min.
Leader part
100(3.937)min.
Top entry type
(2 to 6 circuits) Top entry type
(7 to 16 circuits)
Note:
1. Specifications conform to JIS C 0806. The tape width, connector
loading recess square hole dimensions, etc. are determined by the
number of circuits and external shape of the connector to be loaded.
2. Specifications are subject to change without prior notice.
17.5( .689)
25.5(1.004)
33.5(1.319)
45.5(1.791)
57.5(2.264)
17.5( .689)
25.5(1.004)
33.5(1.319)
45.5(1.791)
57.5(2.264)
1,000
1,000
1,000
1,000
1,000
1,000
1,000
1,000
1,000
1,000
FSWW1
16.0( .630)
24.0( .945)
32.0(1.260)
44.0(1.732)
56.0(2.205)
16.0( .630)
24.0( .945)
32.0(1.260)
44.0(1.732)
56.0(2.205)
–
–
28.4(1.118)
40.4(1.591)
52.4(2.063)
–
–
28.4(1.118)
40.4(1.591)
52.4(2.063)
7.5( .295)
11.5( .453)
14.2( .559)
20.2( .795)
26.2(1.031)
7.5( .295)
11.5( .453)
14.2( .559)
20.2( .795)
26.2(1.031)
2 to 3
4 to 6
7 to 9
10 to 14
15 to 16
2 to 3
4 to 6
7 to 9
10 to 14
15
Circuits Taping dimensions mm(in.) Q'ty /
reel
Reel dimensions
mm(in.)
Top entry
type
Side entry
type
Side entry type
(2 to 6 circuits) Side entry type
(7 to 15 circuits)
53
SMT type PC board layout (viewed from component side) and Assembly layout –––––––––
1.6±0.1
(.063
±
.004)
1.6±0.1
(.063
±
.004)
2.0±0.05
(.079
±
.002)
1.0
(.039)
3.0±0.1
(.118
±
.004)
1.0 min.
(.039)
End face of wafer
on the mating side
7.5(.295)min.
max.2.0(.079)
5.0(.197) [2.0(.079)]
8.6(.339)
6.6(.260)
max.
9.0(.354)min.
(.039)
3.4±0.1
(.134
±
.004)
0.2
(.008)
1.5±0.1
(.059
±
.004)
1.6±0.1
(.063
±
.004)
2.0±0.05
(.079
±
.002)
End face of wafer
on the mating side
1.0 min.
5.5(.217)
7.6(.299)
9.6(.378) 1.0(.039)
5.5(.217)
SM3, SM4 type Side entry type
Top entry type
Note:
1. Tolerances are non-cumulative:
±
0.05mm(
±
.002" ) for all centers.
2. The dimensions above should serve as a guideline. Contact JST for details.
PH CONNECTOR
Contact Crimp applicator MKS-L(-10) Compact crimp applicator MKS-LS Strip-crimp applicator MKS-SC
with safety cover without safety cover with safety cover without safety cover with safety cover
Applicator for the semi-automatic press AP-K2N –––––––––––––––––––––––––––––––
SPH-002T-P0.5S APLMK SPH002-05S APLNC SPH002-05S APLMKLS SPH002-05S APLLSNC SPH002-05S APLSC SPH002-05S
SPH-004T-P0.5S APLMK SPH004-05S APLNC SPH004-05S ––APLSC SPH004-05S
SPH-002T-P0.5L APLMK SPH002-05L APLNC SPH002-05L APLMKLS SPH002-05L APLLSNC SPH002-05L APLSC SPH002-05L
HOME > Product Profile
|
Company Profile
|
J.S.T. Network
|
J.S.T. Other Websites
|
Products Precautions
|
HOME
CK connector
CK connector CK connector
CK connector
Multi
-
harness of CK connector(2.0mm) and CZ connector
(1.5mm) combination has been realized.
The in-
line type IDC features low profile design with 6.9mm
mounting height and 4.8mm thickness(top entry type).
*UL10272 wire has come to be applicable for
Product Profile
Product ProfileProduct Profile
Product Profile
Series
CK connector
Category
Wire to Board Insulation Displacement
Connectors
Type
Disconnectable type
IDC style, Low-profile type
Specification
SpecificationSpecification
Specification
RoHS compliant products are published.
(LF)(SN) as identification part number shall be displayed on a label.
When ordering RoHS compliant products, please inquire to the nearest
JST Sales Office, or order them with the described part number adding
(LF)(SN) as the identification marking after it.
Further Information
Pitch
2
Current rating
AC/DC 2A (AWG#26)
Voltage rating
AC/DC 100V
Available number of
circuits
2 to 15
PC board mounting
direction
Top entry, Side entry
J.S.T. Mfg. Co., Ltd.
Copyright(C) 1999
-
2008 J.S.T. Mfg. Co.,Ltd All rights reserved.
Page
1
of
1
J.S.T. Mfg. Co., Ltd.
8/29/2008
http://www.jst
-
mfg.com/product/detail_e.php?series=34