Power Transistors
1
Publication date: April 2003 SJD00080BED
2SB1504
Silicon PNP epitaxial planar type darlington
For power switching
•High forward current transfer ratio hFE
•High-speed switching
•Allowing automatic insertion with radial taping
■Absolute Maximum Ratings Ta = 25°C
■Electrical Characteristics Ta = 25°C ± 3°C
Note) 1. Measuring methods are based on JAPANESE INDUSTRIAL STANDARD JIS C 7030 measuring methods for transistors.
2. *: Rank classification
Rank P Q R
hFE1 1
000 to 2
500 2
000 to 5
000 4
000 to 10
000
Internal Connection
B
C
E
Unit: mm
1: Emitter
2: Collector
3: Base
MT-3-A1 Package
7.5±0.2
0.65±0.1
0.7±0.1
1.15±0.2
2.5±0.2 2.5±0.2
0.85±0.1
1.0±0.1
0.7±0.1
1.15±0.2
0.5±0.1
1
0.8 C 23
0.4±0.1
4.5±0.2
0.8 C 0.8 C
3.8±0.2
16.0±1.0 10.8±0.2
2.05±0.2
90˚
2.5±0.1
Parameter Symbol Rating Unit
Collector-base voltage (Emitter open) VCBO −50 V
Collector-emitter voltage (Base open) VCEO −50 V
Emitter-base voltage (Collector open) VEBO −7V
Collector current IC−8A
Peak collector current ICP −12 A
Collector power dissipation PC1.5 W
Junction temperature Tj150 °C
Storage temperature Tstg −55 to +150 °C
Parameter Symbol Conditions Min Typ Max Unit
Collector-emitter voltage (Base open) VCEO IC = −30 mA, IB = 0 −50 V
Collector-base cutoff current (Emitter open)
ICBO VCB = −50 V, IE = 0 −100 µA
Emitter-base cutoff current (Collector open)
IEBO VEB = −7 V, IC = 0 −2mA
Forward current transfer ratio hFE1 *VCE = −3 V, IC = −4 A 1
000 10
000
hFE2 VCE = −3 V, IC = −8 A 500
Collector-emitter saturation voltage VCE(sat) IC = −4 A, IB = −8 mA −1.5 V
Base-emitter saturation voltage VBE(sat) IC = −4 A, IB = −8 mA −2.0 V
Transition frequency fTVCB = −10 V, IE = 0.5 A, f = 200 MHz 20 MHz
Turn-on time ton IC = −4 A, IB1 = −8 mA, IB2 = 8 mA 0.5 µs
Storage time tstg VCC = −50 V 2.0 µs
Fall time tf1.0 µs
This product complies with the RoHS Directive (EU 2002/95/EC).
Maintenance/
Discontinued
Maintenance/Discontinued includes following four Product lifecycle stage.
planed maintenance type
maintenance type
planed discontinued typed
discontinued type
Please visit following URL about latest information.
http://www.semicon.panasonic.co.jp/en/
2SB1504
2SJD00080BED
PC TaIC VCE VCE(sat) IC
VBE(sat) IChFE ICCob VCB
Safe operation area Rth t
0 16040 12080
0
0.4
0.8
1.2
1.6
2.0
Collector power dissipation PC (W)
Ambient temperature Ta (°C)
Without heat sink
0
−2
−6
−4
−8
0−5−1−2−4−3
I
B
=–2.0mA
–1.8mA
–1.6mA
–1.4mA
–1.2mA
–1.0mA
–0.8mA
–0.6mA
–0.4mA
–0.2mA
TC=25˚C
Collector current I
C
(A)
Collector-emitter voltage V
CE
(V)
− 0.1
−1
−10
−100
− 0.1 −1−10
IC/IB=500
T
C
=100˚C
–25˚C
25˚C
Collector-emitter saturation voltage V
CE(sat)
(V)
Collector current I
C
(A)
− 0.1
− 0.1 −1−10
−10
−1
−100
Base-emitter saturation voltage V
BE(sat)
(V)
Collector current I
C
(A)
IC/IB=500
TC=–25˚C
25˚C
100˚C
− 0.1 −1−10
102
103
104
105
Forward current transfer ratio hFE
Collector current IC (A)
V
CE
=–3V
T
C
=100˚C 25˚C
–25˚C
− 0.1 −1−10 −100
1
10
102
103
104
Collector output capacitance
(Common base, input open circuited) C
ob
(pF)
Collector-base voltage V
CB
(V)
IE=0
f=1MHz
TC=25˚C
− 0.01
−1
− 0.1
−1
−10
−100
−10 −100
−1
000
Collector current I
C
(A)
Collector-emitter voltage V
CE
(V)
Non repetitive pulse
T
C
=25˚C
t=10ms
t=1ms
I
CP
I
C
t=300ms
10−1
1
10
102
104
103
10−4104
103
102
10110−1
10−2
10−3
Time t (s)
Thermal resistance R
th
(°C/W)
Without heat sink
This product complies with the RoHS Directive (EU 2002/95/EC).
Maintenance/
Discontinued
Maintenance/Discontinued includes following four Product lifecycle stage.
planed maintenance type
maintenance type
planed discontinued typed
discontinued type
Please visit following URL about latest information.
http://www.semicon.panasonic.co.jp/en/
Request for your special attention and precautions in using the technical information and
semiconductors described in this book
(1)If any of the products or technical information described in this book is to be exported or provided to non-residents, the laws and
regulations of the exporting country, especially, those with regard to security export control, must be observed.
(2)The technical information described in this book is intended only to show the main characteristics and application circuit examples
of the products, and no license is granted under any intellectual property right or other right owned by our company or any other
company. Therefore, no responsibility is assumed by our company as to the infringement upon any such right owned by any other
company which may arise as a result of the use of technical information described in this book.
(3)The products described in this book are intended to be used for standard applications or general electronic equipment (such as office
equipment, communications equipment, measuring instruments and household appliances).
Consult our sales staff in advance for information on the following applications:
– Special applications (such as for airplanes, aerospace, automobiles, traffic control equipment, combustion equipment, life support
systems and safety devices) in which exceptional quality and reliability are required, or if the failure or malfunction of the prod-
ucts may directly jeopardize life or harm the human body.
– Any applications other than the standard applications intended.
(4)The products and product specifications described in this book are subject to change without notice for modification and/or im-
provement. At the final stage of your design, purchasing, or use of the products, therefore, ask for the most up-to-date Product
Standards in advance to make sure that the latest specifications satisfy your requirements.
(5)When designing your equipment, comply with the range of absolute maximum rating and the guaranteed operating conditions
(operating power supply voltage and operating environment etc.). Especially, please be careful not to exceed the range of absolute
maximum rating on the transient state, such as power-on, power-off and mode-switching. Otherwise, we will not be liable for any
defect which may arise later in your equipment.
Even when the products are used within the guaranteed values, take into the consideration of incidence of break down and failure
mode, possible to occur to semiconductor products. Measures on the systems such as redundant design, arresting the spread of fire
or preventing glitch are recommended in order to prevent physical injury, fire, social damages, for example, by using the products.
(6)Comply with the instructions for use in order to prevent breakdown and characteristics change due to external factors (ESD, EOS,
thermal stress and mechanical stress) at the time of handling, mounting or at customer's process. When using products for which
damp-proof packing is required, satisfy the conditions, such as shelf life and the elapsed time since first opening the packages.
(7)This book may be not reprinted or reproduced whether wholly or partially, without the prior written permission of Matsushita
Electric Industrial Co., Ltd.
Maintenance/
Discontinued
Maintenance/Discontinued includes following four Product lifecycle stage.
planed maintenance type
maintenance type
planed discontinued typed
discontinued type
Please visit following URL about latest information.
http://www.semicon.panasonic.co.jp/en/
