Epoxy/Polish Connectors and Mechanical Splices Each connector kit comes with accessories needed to terminate to 250 m fiber, 900 m tight-buffered fiber, 900 m easy-strip, buffer tube splitter kits, 1.6 - 2.0 mm and 3 mm cable (select appropriate part number) Boot type and coupling nut options (select appropriate part number) Suitable for use with heat-cured or anaerobic (quick cure) epoxies See Instruction Sheet for recommended anaerobic epoxies Pre-radiused ceramic ferrules for easy polishing Multimode connectors are suitable for use with 50/125 m, XG (850 nm LO 50/125 m) and 62.5/125 m fibers Mates with standard couplers, adapters and adapter plates Fiber Type Single-mode Ferrule Type Ceramic Body Coupling Nut Boot Type & Color Part Number Zinc 900m 5503613-2 Die Cast Bend-Limiting, Yellow 502579-2 Zinc Short, Yellow 5502580-2 Polymer Short, Black, 900 m 5035 71 *3 Bend-Limiting, Black !)4[12458-1 Short, Black 1*5501380-6 Nickel-plated Brass Polymer Multimode Ceramic Nickel-plated Brass Die Cast NOTE: Highlighted part numbers are routinely stocked for shortest lead times. Replacement keys Description Single-mode Clear CORELINK Splice Multimode Blue 2 Replacement keys in key holder NOTE: Highlighted part numbers are routinely stocked for shortest lead times . Each CORELINK splice mates two 900 m tight-buffered fibers or two 250 m coated fibers Easy to install Reusable No bench tool required Splices sold in packs of 12 Includes 2 actuator keys Optional CORELINK installation tool shown on page 263 Part Number 503577-1 503901-1 503681-1 ********************************************************************************** www.ampnetconnect.com 4.2