AC Line EMI Suppression and RC Networks PMR205 Series Metallized Impregnated Paper, 125 VAC/250 VDC Overview Applications The PMR205 Series is constructed of multilayer metallized paper encapsulated and impregnated in self-extinguishing material meeting the requirements of UL 94 V-0. Typical applications include worldwide use in contact protection, contact interference suppression and transient suppression. Benefits * * * * * * * * * * Rated voltage: 125 VAC/250 VDC, 50/60 Hz Capacitance range: 0.1 - 1.0 F Capacitance tolerance: 20% Resistance range: 22 - 680 Resistance tolerance: 30% Lead spacing: 15.2 - 25.4 mm Climatic category: 40/085/56/B, IEC 60068-1 Tape and reel packaging in accordance with IEC 60286-2 RoHS Compliant and lead-free terminations Operating temperature range of -40C to +85C * Excellent self-healing properties which ensure long life even when subjected to frequent over voltages * Good resistance to ionization due to impregnated paper dielectric * High dV/dt capability * Impregnated paper ensures excellent stability and reliability properties, particularly in applications with continuous operation Legacy Part Number System PMR205 A Series B Rated Voltage (VAC) Lead Spacing (mm) RC Snubber, Metallized Paper A = 125 B = 15.2 C = 20.3 E = 25.4 6100 M 033 R30 Capacitance Code (pF) Capacitance Tolerance Resistance () Lead and Packaging Code Resistance Value in See Ordering Options Table Digits 2 - 4 (3) indicates the first three digits of the capacitance value. First digit indicates the total number of digits in the capacitance value. M = 20% New KEMET Part Number System P 405 Q E 104 M Capacitor Class Series Lead Spacing (mm) Size Code Capacitance Code (pF) Capacitance Tolerance Q = 15.2 C = 20.3 E = 25.4 See Dimension Table First two digits represent significant figures. Third digit specifies number of zeros. P= Metallized Paper RC Snubber 125 A H330 Rated Voltage Lead and (VAC) Packaging Code M = 20% 125 = 125 See Ordering Options Table Resistance () H + first two digits representing significant figures. Third digit specifies number of zeros. One world. One KEMET (c) KEMET Electronics Corporation * P.O. Box 5928 * Greenville, SC 29606 (864) 963-6300 * www.kemet.com F3024_PMR205 * 2/20/2014 1 Film Capacitors AC Line EMI Suppression and RC Networks - PMR205 Series Metallized Impregnated Paper, 125 VAC/250 VDC Ordering Options Table Lead Spacing Nominal (mm) Type of Leads and Packaging Lead Length (mm) KEMET Lead and Packaging Code Legacy Lead and Packaging Code 6 +0/-1 30 +5/-0 H0= 18.5 +/-0.5 C A L R06 R30 R19T0 H0= 18.5 +/-0.5 P R19T1 6 +0/-1 30 +5/-0 H0= 18.5 +/-0.5 C A L R06 R30 R19T0 H0= 18.5 +/-0.5 P R19T1 6 +0/-1 30 +5/-0 C A R06 R30 Standard Lead and Packaging Options Bulk (Bag) - Short Leads Bulk (Bag) - Max Length Leads Tape & Reel (Standard Reel) 15.2 Other Lead and Packaging Options Tape & Reel (Large Reel) Standard Lead and Packaging Options Bulk (Tray) - Short Leads Bulk (Bag) - Max Length Leads Tape & Reel (Standard Reel) 20.3 Other Lead and Packaging Options Tape & Reel (Large Reel) Standard Lead and Packaging Options 25.4 Bulk (Bag) - Short Leads Bulk (Tray) - Max Length Leads Dimensions - Millimeters B L R C Series Connection d H LL p Size Code QE QM QP CE CJ CP EE p B H L d Nominal Tolerance Nominal Tolerance Nominal Tolerance Nominal Tolerance Nominal Tolerance 15.2 15.2 15.2 20.3 20.3 20.3 25.4 +/-0.4 +/-0.4 +/-0.4 +/-0.4 +/-0.4 +/-0.4 +/-0.4 5.2 7.3 7.8 7.6 9 11.3 10.6 Maximum Maximum Maximum Maximum Maximum Maximum Maximum 10.5 13 13.5 14 15 16.5 16.1 Maximum Maximum Maximum Maximum Maximum Maximum Maximum 18.5 18.5 18.5 24 24 24 30.5 Maximum Maximum Maximum Maximum Maximum Maximum Maximum 0.8 0.8 0.8 0.8 0.8 0.8 1.0 +/-0.05 +/-0.05 +/-0.05 +/-0.05 +/-0.05 +/-0.05 +/-0.05 Note: See Ordering Options Table for lead length (LL) options. (c) KEMET Electronics Corporation * P.O. Box 5928 * Greenville, SC 29606 (864) 963-6300 * www.kemet.com F3024_PMR205 * 2/20/2014 2 Film Capacitors AC Line EMI Suppression and RC Networks - PMR205 Series Metallized Impregnated Paper, 125 VAC/250 VDC Performance Characteristics Rated Voltage Capacitance Range Capacitance Tolerance Resistance Range Resistance Tolerance Temperature Range Climatic Category Peak Pulse Voltage Series Resistance 125 VAC 50/60 Hz 0.1 - 1.0 F 20% 22 - 680 30% -40C to +85C 40/085/56/B 375 V The series resistance is defined at 1 kHz for RC 50 s and at 100 kHz for RC < 50 s Minimum Values Between Terminals Insulation Resistance Power Ratings C 0.33 F 3,000 M C > 0.33 F 1,000 M * F The average losses may reach 0.5 W provided the surface temperature does not exceed + 85C. For maximum permitted power dissipation vs. temperature, see Derating Curves. Maximum Allowable Power Dissipation vs. Ambient Temperature and Case Sizes. Derating Curves C Curve Dimension B (mm) 1 2 2 3 4 5 5.2 7.3 7.8 7.6 9 11.3 (c) KEMET Electronics Corporation * P.O. Box 5928 * Greenville, SC 29606 (864) 963-6300 * www.kemet.com F3024_PMR205 * 2/20/2014 3 Film Capacitors AC Line EMI Suppression and RC Networks - PMR205 Series Metallized Impregnated Paper, 125 VAC/250 VDC Environmental Test Data Test IEC Publication Procedure Vibration IEC 60068-2-6 Test Fc 3 directions at 2 hours each 10 - 500 Hz at 0.75 mm or 98 m/s2 Bump IEC 60068-2-29 Test Eb 4,000 bumps at 390 m/s2 Solderability IEC 60068-2-20 Test Ta Wetting time for d > 0.8 < 1.5 seconds Damp Heat Steady State IEC 60068-2-78 Test Cab +40C and 93% RH, 56 days Environmental Compliance All KEMET EMI capacitors are RoHS Compliant. (c) KEMET Electronics Corporation * P.O. Box 5928 * Greenville, SC 29606 (864) 963-6300 * www.kemet.com F3024_PMR205 * 2/20/2014 4 Film Capacitors AC Line EMI Suppression and RC Networks - PMR205 Series Metallized Impregnated Paper, 125 VAC/250 VDC Table 1 - Ratings & Part Number Reference Lead Spacing (p) Capacitance Value (F) Resistance () 15.2 15.2 15.2 15.2 15.2 15.2 15.2 15.2 15.2 15.2 15.2 15.2 15.2 15.2 15.2 20.3 20.3 20.3 20.3 20.3 20.3 20.3 20.3 20.3 20.3 25.4 20.3 20.3 20.3 20.3 20.3 0.10 0.10 0.10 0.10 0.15 0.15 0.22 0.22 0.22 0.22 0.22 0.25 0.25 0.25 0.33 0.47 0.47 0.47 0.47 0.47 0.47 0.47 0.47 0.47 0.47 1.0 1.0 1.0 1.0 1.0 1.0 Lead Spacing (p) Capacitance Value (F) Maximum Dimensions in mm B H L New KEMET Part Number 33 47 100 220 68 100 47 100 220 330 470 200 350 600 47 22 33 47 68 100 150 220 330 470 680 33 47 68 100 150 220 5.2 5.2 5.2 5.2 5.2 5.2 7.3 7.3 7.3 7.3 7.3 7.3 7.3 7.3 7.8 7.6 7.6 7.6 7.6 7.6 7.6 7.6 7.6 9.0 11.3 10.6 11.3 11.3 11.3 11.3 11.3 10.5 10.5 10.5 10.5 10.5 10.5 13.0 13.0 13.0 13.0 13.0 13.0 13.0 13.0 13.5 14.0 14.0 14.0 14.0 14.0 14.0 14.0 14.0 15.0 16.5 16.1 16.5 16.5 16.5 16.5 16.5 18.5 18.5 18.5 18.5 18.5 18.5 18.5 18.5 18.5 18.5 18.5 18.5 18.5 18.5 18.5 24.0 24.0 24.0 24.0 24.0 24.0 24.0 24.0 24.0 24.0 30.5 24.0 24.0 24.0 24.0 24.0 P405QE104M125(1)H330 P405QE104M125(1)H470 P405QE104M125(1)H101 P405QE104M125(1)H221 P405QE154M125(1)H680 P405QE154M125(1)H101 P405QM224M125(1)H470 P405QM224M125(1)H101 P405QM224M125(1)H221 P405QM224M125(1)H331 P405QM224M125(1)H471 P405QM254M125(1)H201 P405QM254M125(1)H351 P405QM254M125(1)H601 P405QP334M125(1)H470 P405CE474M125(1)H220 P405CE474M125(1)H330 P405CE474M125(1)H470 P405CE474M125(1)H680 P405CE474M125(1)H101 P405CE474M125(1)H151 P405CE474M125(1)H221 P405CE474M125(1)H331 P405CJ474M125(1)H471 P405CP474M125(1)H681 P405EE105M125(1)H330 P405CP105M125(1)H470 P405CP105M125(1)H680 P405CP105M125(1)H101 P405CP105M125(1)H151 P405CP105M125(1)H221 PMR205AB6100M033(1) PMR205AB6100M047(1) PMR205AB6100M100(1) PMR205AB6100M220(1) PMR205AB6150M068(1) PMR205AB6150M100(1) PMR205AB6220M047(1) PMR205AB6220M100(1) PMR205AB6220M220(1) PMR205AB6220M330(1) PMR205AB6220M470(1) PMR205AB6250M200(1) PMR205AB6250M350(1) PMR205AB6250M600(1) PMR205AB6330M047(1) PMR205AC6470M022(1) PMR205AC6470M033(1) PMR205AC6470M047(1) PMR205AC6470M068(1) PMR205AC6470M100(1) PMR205AC6470M150(1) PMR205AC6470M220(1) PMR205AC6470M330(1) PMR205AC6470M470(1) PMR205AC6470M680(1) PMR205AE7100M033(1) PMR205AC7100M047(1) PMR205AC7100M068(1) PMR205AC7100M100(1) PMR205AC7100M150(1) PMR205AC7100M220(1) Resistance B (mm) H (mm) L (mm) New KEMET Part Number Legacy Part Number Legacy Part Number (1) Insert lead and packaging code. See Ordering Options Table for available options. (c) KEMET Electronics Corporation * P.O. Box 5928 * Greenville, SC 29606 (864) 963-6300 * www.kemet.com F3024_PMR205 * 2/20/2014 5 Film Capacitors AC Line EMI Suppression and RC Networks - PMR205 Series Metallized Impregnated Paper, 125 VAC/250 VDC Soldering Process The implementation of the RoHS Directive has required the use of SnAuCu (SAC) or SnCu alloys as primary solder. These alloys require a higher liquidus temperature (217C - 221C) as compared to SnPb eutectic alloy (183C). Due to the higher pre-heat and wave temperatures, the heat stress to components has increased considerably. Polypropylene capacitors are especially sensitive to soldering temperature due to the relatively low melting point of polypropylene material (160C - 170C). As a result, wave soldering can be destructive, especially to mechanically small polypropylene capacitors with lead spacings of 5 - 10 mm. For more information, please refer to KEMET's Recommended Soldering Profiles or contact a KEMET representative. IEC Publication 61760-1 Edition 2 may also be consulted for general guidelines. Marking * * * * * * * * * * KEMET's logo Series RC unit Capacitance Rated resistance Rated voltage IEC climatic category Circuit diagram Passive flammability class Manufacturing date code Packaging Quantities Size Code Lead Spacing (mm) Thickness (mm) Height (mm) Length (mm) Bulk Short Leads Bulk Long Leads Standard Reel o 360 mm QE QM QP 15.2 15.2 15.2 5.2 7.3 7.8 10.5 13 13.5 18.5 18.5 18.5 500 400 400 100 800 800 600 400 400 CE CJ CP EE 20.3 20.3 20.3 25.4 7.6 9 11.3 10.6 14 15 16.5 16.1 24 24 24 30.5 250 200 150 150 1500 1200 1000 1000 250 250 180 (c) KEMET Electronics Corporation * P.O. Box 5928 * Greenville, SC 29606 (864) 963-6300 * www.kemet.com F3024_PMR205 * 2/20/2014 6 Film Capacitors AC Line EMI Suppression and RC Networks - PMR205 Series Metallized Impregnated Paper, 125 VAC/250 VDC Lead Taping & Packaging (IEC 60286-2) Lead Spacing 20.3 - 22.5 mm Lead Spacing 10.2 - 15.2 mm 0 0 Formed Leads from 10.2 to 7.5 mm 0 Taping Specification Dimensions in mm Lead spacing +6/-0.1 F Carrier tape width +/-0.5 W Formed 7.5 18 Hold-down tape width +/-0.3 W0 Position of sprocket hole +/-0.5 Distance between tapes Maximum Standard IEC 60286-2 10.2 15.2 20.3 22.5 F 18 18 18 18 18+1/-0.5 9 12 12 12 12 W1 9 9 9 9 9 9+0.75/-0.5 W2 3 3 3 3 3 3 Sprocket hole diameter +/-0.2 D0 4 4 4 4 4 4 Feed hole lead spacing +/-0.3 P0(1) 12.7(4) 12.7 12.7 12.7 12.7 12.7 Distance lead - feed hole +/-0.7 P1 3.75 7.6 5.1 8.9 5.3 P1 Deviation tape - plane Maximum p 1.3 1.3 1.3 1.3 1.3 1.3 Lateral deviation Maximum h 2 2 2 2 2 2 Total thickness +/-0.2 t 0.7 0.7 0.7 0.7 Sprocket hole/cap body Nominal H0(2) 18+2/-0 18+2/-0 18+2/-0 18+2/-0 18.5+/-0.5 18+2/-0 Sprocket hole/top of cap body Maximum H1(3) 35 35 35 35 58 58MAX (1) Maximum cumulative feed hole error, 1 mm per 20 parts. (2) 16.5 mm available on request. 0.9 MAX 0.9MAX (3) Depending on case size. (4) 15 mm available on request. (c) KEMET Electronics Corporation * P.O. Box 5928 * Greenville, SC 29606 (864) 963-6300 * www.kemet.com F3024_PMR205 * 2/20/2014 7 Film Capacitors AC Line EMI Suppression and RC Networks - PMR205 Series Metallized Impregnated Paper, 125 VAC/250 VDC Lead Taping & Packaging (IEC 60286-2) cont'd Ammo Specifications Dimensions (mm) Series R4x, R4x+R, R7x, RSB F5A, F5B, F5D F6xx, F8xx PHExxx, PMExxx, PMRxxx H W T 360 340 59 330 330 50 H T Reel Specifications W Dimensions (mm) Series R4x, R4x+R, R7x, RSB F5A, F5B, F5D F6xx, F8xx PHExxx, PMExxx, PMRxxx D H W 355 500 30 25 55 (Max) 360 500 30 46 (Max) D Manufacturing Date Code (IEC-60062) H W Y = Year, Z = Month Year 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018 2019 2020 Code M N P R S T U V W X A B C D E F H J K L M Month January February March April May June July August September October November December Code 1 2 3 4 5 6 7 8 9 O N D (c) KEMET Electronics Corporation * P.O. Box 5928 * Greenville, SC 29606 (864) 963-6300 * www.kemet.com F3024_PMR205 * 2/20/2014 8 Film Capacitors AC Line EMI Suppression and RC Networks - PMR205 Series Metallized Impregnated Paper, 125 VAC/250 VDC KEMET Corporation World Headquarters Europe Asia Southern Europe Paris, France Tel: 33-1-4646-1006 Northeast Asia Hong Kong Tel: 852-2305-1168 Mailing Address: P.O. Box 5928 Greenville, SC 29606 Sasso Marconi, Italy Tel: 39-051-939111 Shenzhen, China Tel: 86-755-2518-1306 www.kemet.com Tel: 864-963-6300 Fax: 864-963-6521 Central Europe Landsberg, Germany Tel: 49-8191-3350800 Corporate Offices Fort Lauderdale, FL Tel: 954-766-2800 Kamen, Germany Tel: 49-2307-438110 North America Northern Europe Bishop's Stortford, United Kingdom Tel: 44-1279-460122 2835 KEMET Way Simpsonville, SC 29681 Southeast Lake Mary, FL Tel: 407-855-8886 Espoo, Finland Tel: 358-9-5406-5000 Northeast Wilmington, MA Tel: 978-658-1663 Beijing, China Tel: 86-10-5829-1711 Shanghai, China Tel: 86-21-6447-0707 Taipei, Taiwan Tel: 886-2-27528585 Southeast Asia Singapore Tel: 65-6586-1900 Penang, Malaysia Tel: 60-4-6430200 Bangalore, India Tel: 91-806-53-76817 Central Novi, MI Tel: 248-306-9353 West Milpitas, CA Tel: 408-433-9950 Mexico Guadalajara, Jalisco Tel: 52-33-3123-2141 Note: KEMET reserves the right to modify minor details of internal and external construction at any time in the interest of product improvement. KEMET does not assume any responsibility for infringement that might result from the use of KEMET Capacitors in potential circuit designs. KEMET is a registered trademark of KEMET Electronics Corporation. (c) KEMET Electronics Corporation * P.O. Box 5928 * Greenville, SC 29606 (864) 963-6300 * www.kemet.com F3024_PMR205 * 2/20/2014 9 Film Capacitors AC Line EMI Suppression and RC Networks - PMR205 Series Metallized Impregnated Paper, 125 VAC/250 VDC Disclaimer All product specifications, statements, information and data (collectively, the "Information") in this datasheet are subject to change. The customer is responsible for checking and verifying the extent to which the Information contained in this publication is applicable to an order at the time the order is placed. All Information given herein is believed to be accurate and reliable, but it is presented without guarantee, warranty, or responsibility of any kind, expressed or implied. Statements of suitability for certain applications are based on KEMET Electronics Corporation's ("KEMET") knowledge of typical operating conditions for such applications, but are not intended to constitute - and KEMET specifically disclaims - any warranty concerning suitability for a specific customer application or use. The Information is intended for use only by customers who have the requisite experience and capability to determine the correct products for their application. Any technical advice inferred from this Information or otherwise provided by KEMET with reference to the use of KEMET's products is given gratis, and KEMET assumes no obligation or liability for the advice given or results obtained. Although KEMET designs and manufactures its products to the most stringent quality and safety standards, given the current state of the art, isolated component failures may still occur. Accordingly, customer applications which require a high degree of reliability or safety should employ suitable designs or other safeguards (such as installation of protective circuitry or redundancies) in order to ensure that the failure of an electrical component does not result in a risk of personal injury or property damage. Although all product-related warnings, cautions and notes must be observed, the customer should not assume that all safety measures are indicted or that other measures may not be required. (c) KEMET Electronics Corporation * P.O. Box 5928 * Greenville, SC 29606 (864) 963-6300 * www.kemet.com F3024_PMR205 * 2/20/2014 10