4 3 DRW NO. SH REV C-4'70-1075-500 L ZONE |} REV SCR NUMBER DESCRIPTION BY DATE APPROVED WAFER LOAD PATTERNS WERE CORRECTED TO SHOW REALITY, D | JMAN-6GPNSV.VERO1 ON PIN SEO DONE OO be 0S 602. HCL 10/01/05 | J.MARVIN 470-2155-101 AND 470-2155-601 ADDED P/N'S 470-3205-100, 470-3205-600, E | DMNA-6K8TZN.VERON [ih ast tose 1 tee es DLM 12/20/05 | D.MCNAMARA ADDED PART NUMBERS F JPRX-6S2HPM.VERO1 4,70-1105-103 AND &70-1105-603 HCL-PR 07/26/06 J.MARVIN ADDED P/NS 470-1205-100, 470-1205-600, 470-2205-100, & 470-2205-600 B UPDATED DIMENSIONING SCHEME G JPRX-6UUNNG.VERO1 ADDED NOTE FOR MAX BALL PROTRUSION, HOL-MS 11/06/06 J.MARVIN MISSING DIMENSION P AND A NOTE TO EXPLAIN REFERENCE AND BASIC DIMENSIONS SH1,A4 CONTACT MATL WAS CU ALLOY SH1,A4 0.71 DIA WAS 0.76 SH4,A3 0.25/0.05 WAS 0.30/0.01 SHLBI H DMAN-6ZRNL6.VERO1 0.125 TOL WAS 0.20 D .MALOON 04/10/07 J.MARVIN SH2,3 PART NUMBERS REORDERED IN TABLE <q SH2,A3 WAFER 7 POSITION REMOVED FROM 470-1235-XXX ADDED P/NS J |JPRX-788MQP.VERO1 4.70-1075-101 AND 470-1075-601 HCL AP 10/18/07 J.PROULX K |JPRX-7ESPW4.VERO1) ADDED P/N 470-1205-101 AND 4'70-1205-601 HCL-AP 05/15/08 J.PROULX 1. ALL DIMENSIONS ARE IN MM, L |JPRX-7PNHRT.VERO1;} ADDED P/Ns 470-3075-101 & 470-3075-601 HCL-RB 03/09/09 J.PROULX 2. MATL: HOUSING/W AFERS/VACUUM CAP - LCP S CONTACTS - HIGH PERFORMANCE COPPER ALLOY, PER MIS-506. _ 3. 0.71 DIA SOLDER SPHERES WILL NOT BE PERFECTLY = SPHERICAL AFTER REFLOW ATTACHMENT. T, ~] (4) HOLES REQUIRED IF OPTIONAL HOLD-DOWN PINS ARE USED. a Oo SOLDERBALL PROTRUSION BELOW HOUSING. Touerances |" Vevimara| Amphenol TCS (6) SEE TECHNICAL BULLETIN TB-2082 FOR DETAILED LAYOUT 0.0 +0.25 [Saawn oapver A Division of Amphenol Corporation 8 AND SMT PROCESS RECOMMENDATIONS. 0.00. | 40.13 RJ MCISAAC | 200 innovative Way, Nashua, NH 03062 603.879.2000 CHK 06/21/02 TITLE a (7) MAXIMUM CO-PLANARITY OF THE BALL FIELD. 0.000 | + - JMARVIN | RECEPTACLE MODULE ASSEMBLY = |" = ANGLES | +- ep. MARVIN PART NO. REV (8) MAXIMUM RADIAL TRUE POSITION OF ANY SOLDER BALL UNLESS OTHERWISE SPECIFIED DIMENSIONS SEE TABLE IN RELATION TO AN IDEAL BEST FIT GRID. =} A ee RAW ING NO. REV C-470-1075-500 L 9. TOLERANCES DO NOT APPLY TO REFERENCE DIMENSIONS SHOWN IN (Q) OR BASIC DIMENSIONS SHOWN IN LI. CODE IDENT 31413 CUSTOMER USE INTERPRET PER ASME 145M D RAW | NG ProeaSseH P1002-PT-HSG-CAP-ASM10X13X30 | 4.14 P1002-PD-HSG-CU_W_CAP .dwg 1.68 SIZE B | SCALE 2/1 | SHEET 1 OF 9 2 14 3 DRW NO. SH REV C-4'70-1075-500 2 L ZONE | REV SCR NUMBER DESCRIPTION BY DATE APPROVED SEE SHEET | PART NUMBER | REV DESCRIPTION WAFERS INSTALLED H N P R 470-1075-100 | H 10 POS, 7.5 HIGH, REC ASSY - TIN/LEAD BALL ALL 75 | 9 | 15.75 | 21.81 470-1075-101_ | H 10 POS, 7.5 HIGH, REC ASSY - TIN/LEAD BALL 13,5, 7.9 75 | 9 (15.75 | 21.81 470-1075-600 | H 10 POS. 7.5 HIGH, REC ASSY - RoHS COMPLIANT BALL ALL 75 | 9 [15.75 | 21.81 470-075-601 | H 10 POS. 7.5 HIGH, REC ASSY - ROHS COMPLIANT BALL 43,5,7.9 75 | 9 [15.75 | 21.81 470-105-100 | H 10 POS, 10.5 HIGH, REC ASSY - TIN/LEAD BALL ALL 70.5 | 9 | 15.75 | 21.81 470-105-102 | H 10 POS, 10.5 HIGH, REC ASSY - TIN/LEAD BALL 1.3,5.7,9 70.5 | 9 | 15.75 | 21.81 470-1105-103 | H 10 POS, 10.5 HIGH. REC ASSY - TIN/LEAD BALL 1.3,5,7.9,10 70.5 | 9 | 15.75 | 21.81 470-105-600 | H | 10 POS, 10.5 HIGH. REC ASSY - RoHS COMPLIANT BALL ALL 70.5 | 9 | 15.75 | 21.81 470-1105-602 | H | 10 POS, 10.5 HIGH. REC ASSY - RoHS COMPLIANT BALL 4,3,5,7,9 70.5 | 9 | 15.75 | 21.81 470-1105-603 | H | 10 POS. 10.5 HIGH, REC ASSY - RoHS COMPLIANT BALL 1.3.5,7,9,10 70.5 | 9 | 15.75 | 21.81 R 470-1155-100 | H 10 POS. 15.5 HIGH, REC ASSY - TIN/LEAD BALL ALL 5.5 | 9 115.75 | 21.81 470-155-101 H 10 POS, 15.5 HIGH, REC ASSY - TIN/LEAD BALL 1.3,5.7,9 5.5 | 9 115.75 | 21.81 470-1155-102 | H 10 POS, 15.5 HIGH, REC ASSY - TIN/ALEAD BALL 1.3,5.7.9,10 5.5 | 9 115.75 | 21.81 470-1155-600 | H | 10 POS, 15.5 HIGH, REC ASSY - RoHS COMPLIANT BALL ALL 5.5 | 9 115.75 | 21.81 470-1155-601 | H | 10 POS. 15.5 HIGH, REC ASSY - RoHS COMPLIANT BALL 1.3.5,7.9 55 1 9 145.75 | 21.81 470-1155-602 | H | 10 POS, 15.5 HIGH, REC ASSY - RoHS COMPLIANT BALL 1.3,5,7,9,10 55 1 9 145.75 | 21.81 470-1205-100 | H 10 POS, 20.5 HIGH, REC ASSY - TIN/LEAD BALL ALL 20.5 | 9 | 15.75 | 21.81 470-1205-600 | H | 10 POS, 20.5 HIGH, REC ASSY - RoHS COMPLIANT BALL ALL 20.5 | 9 [15.75 | 24.81 470-1205-101_ | H 10 POS. 20.5 HIGH, REC ASSY- TIN/LEAD BALL 1,2,3,4,6,7,8,9+10 20.55 | 9 | 15.75 | 21.81 q 470-1205-601 | H 10 POS, 20.5 HIGH, REC ASSY- RoHS COMPLIANT BALL 1,2,3,4,6.7,8,9,10 20.5 | 9 | 15.75 | 21.81 NOTE: TABLE CONTINUES ON SHEET 3 470-1235-100 | H 10 POS. 23.5 HIGH. REC ASSY - TIN/LEAD BALL ALL 23.5 | 9 |15.75 | 21.81 470-1235-101_ | H 10 POS, 23.5 HIGH. REC ASSY - TIN/LEAD BALL 1,2.3,4,5,6.8.10 23.5 | 9 |15.75 | 21.81 470-1235-102 | H 10 POS, 23.5 HIGH. REC ASSY - TIN/LEAD BALL 1.3.5,7.9 23.5 | 9 [15.75] 21.31 470-1235-600 | H | 10 POS, 23.5 HIGH, REC ASSY RoHS COMPLIANT BALL ALL 23.5 | 9 [15.75 | 21.81 470-1235-601 | H | 10 POS, 23.5 HIGH, REC ASSY - RoHS COMPLIANT BALL 1,2,3,4,5,6,8,10 23.5 | 9 [15.75 | 21.81 470-1235-602 | H | 10 POS, 23.5 HIGH, REC ASSY RoHS COMPLIANT BALL 1,3.5,7,9 23.5 | 9 [15.75 | 21.31 470-2075-100 | H 20 POS, 7.5 HIGH, REC ASSY TIN/LEAD BALL ALL 75 | 19 | 33.25 | 39.31 470-2075-101_ | H 20 POS, 7.5 HIGH, REC ASSY - TIN/LEAD BALL 1,3,5.7.961113,15.1719 7.5 | 19 | 33.25 | 39.31 470-2075-102 | H 20 POS. 7.5 HIGH, REC ASSY - TIN/LEAD BALL 1,3,5.7,9.11,13,14.15,16,17,18,19,20 7.5 | 19 | 33.25 | 39.31 470-2075-600 | H | 20 POS, 7.5 HIGH, REC ASSY - RoHS COMPLIANT BALL ALL 7.5 | 19 | 33.25 | 39.31 470-2075-601 | H | 20 POS, 7.5 HIGH, REC ASSY - RoHS COMPLIANT BALL 1,3,5,7,9,11,13,15,17,19 75 | 19 [33.25 | 39.31 3 470-2075-602 | H | 20 POS, 7.5 HIGH, REC ASSY - ROHS COMPLIANT BALL 1,3,5.7.9,11,13,14.15,16,17,18,19,20 7.5 | 19 [33.25 | 39.31 mz 470-2105-100 | H 20 POS, 10.5 HIGH, REC ASSY - TIN/LEAD BALL ALL 70.5 | 19 [33.25 | 39.31 A 470-2105-101_ | H 20 POS, 10.5 HIGH, REC ASSY - TIN/LEAD BALL 4,3,557,9611,13,15.17,19 10.5 | 19 | 33.25 | 39.31 5 470-2105-600 | H | 20 POS, 10.5 HIGH, REC ASSY - RoHS COMPLIANT BALL ALL 170.5 | 19 [33.25 | 39.31 470-2105-601_ | H | 20 POS, 10.5 HIGH, REC ASSY - RoHS COMPLIANT BALL 1,3,5.7.961113,15.1719 10.5 | 19 | 33.25 | 39.31 3 470-2155-100 | H 20 POS. 15.5 HIGH. REC ASSY - TIN/LEAD BALL ALL 5.5 | 19 | 33.25 | 39.31 > 470-2155-101_ | H 20 POS. 15.5 HIGH. REC ASSY - TIN/LEAD BALL 1.3,5.7,9.11,13,14.15.16,17,18,19,20 5.5 | 19 | 33.25 | 39.31 Oh 470-2155-600 | H | 20 POS, 15.5 HIGH, REC ASSY - RoHS COMPLIANT BALL ALL 5.5 | 19 | 33.25 | 39.31 S 470-2155-601_ | H | 20 POS, 15.5 HIGH, REC ASSY - ROHS COMPLIANT BALL 1,3,5.7.9,11,13,14.15,16,17,18,19,20 5.5 | 19 | 33.25 | 39.31 470-2205-100 | H 20 POS, 20.5 HIGH, REC ASSY TIN/LEAD BALL ALL 20.5 | 19 | 33.25 | 39.81 TOLERANCES | DESIGN T0708 Amphenol TCS 470-2205-600 | H | 20 POS, 20.5 HIGH. REC ASSY - RoHS COMPLIANT BALL ALL 20.5 | 19 | 33.25 | 39.81 00 | a025 x " - 470-2235-100 | H 20 POS, 23.5 HIGH, REC ASSY - TIN/LEAD BALL ALL 23.5 | 19 | 33.25 | 39.81 | OR a AAC | ap vey een Corporation Nt 470-2235-101_ | 4 20 POS, 23.5 HIGH, REC ASSY - TIN/LEAD BALL 4,24 .5,7,8.10,.11,13,14 16.17.1920 23.5 | 19 | 33.25 | 39.31 0.00. | 40.13 Innovative Way, Neshua, 608.678.3000 470-2235-102 | H 20 POS, 23.5 HIGH. REC ASSY - TIN/LEAD BALL 1 THRU 16,18,20 23.5 | 19 | 33.25 | 39.31 CHK 06/21/02 TITLE = 4.70-2235-600 H 20 POS, 23.5 HIGH, REC ASSY - RoHS COMPLIANT BALL ALL 23.5 | 19 | 33.25 | 39.81 0.000 | + - J.MARVIN RECEPTACLE MODULE ASSEMBLY rT < 470-2235-601_| H | 20 POS, 23.5 HIGH, REC ASSY - RoHS COMPLIANT BALL 1,2,4,5,7,8.10,11,13,14,16,17,19,20 23.5 | 19 | 33.25 | 39.31 ANGLES | wD 2062001 L 470-2235-602 | H | 20 POS, 23.5 HIGH, REC ASSY - RoHS COMPLIANT BALL 1 THRU 16,18,20 23.5 | 19 | 33.25 | 39.31 : PART NO. SEE TABLE REV 470-3075-100 | H 30 POS, 7.5 HIGH, REC ASSY - TIN/LEAD BALL ALL 7.5 | 29 {50.75 | 56.81 PNARE: IN MMDECIMAL MAKER IS-PERIOD 470-3075-101_ | A 30 POS, 7.5 HIGH, REC ASSY - TIN/ALEAD BALL 4,3.5,7,9411,13,15,.17,19,21,23,25,.27,29 7.5 | 29 [50.75 | 56.81 F-+ DRAW ING NO. REV 470-3075-600 | H | 30 POS, 7.5 HIGH, REC ASSY - RoHS COMPLIANT BALL ALL 75 [29 [50.75 | 56.81 6) CUSTOMER USE C-470-1079-300 L 470-3075-601 | H | 30 POS, 7.5 HIGH, REC ASSY - RoHS COMPLIANT BALL 46305,719111,13.15.17,19,.21,23,25,27.29 7.5 | 29 [50.75 | 56.81 INTERPRET PER ASME Y'%.5M Proeassen P1002-PT-HSG-CAP-ASM10X13X30 | 7.14 470-3105-100 H 30 POS. 10.5 HIGH. REC ASSY - TIN/LEAD BALL ALL 10.5 | 29 [50.75 | 56.81 DRAW ING P1002-PO-HSG-CU_W_CAP .dwg 1.68 CODE IDENT 31413 size B [SCALE 2/4 | SHEET 2 OF 9 l, 3 2 14 3 DRW NO. SH REV C-4'70-1075-500 3 L ZONE | REV SCR NUMBER DESCRIPTION BY DATE APPROVED SEE SHEET 1 PART NUMBER | REV DESCRIPTION WAFERS INSTALLED H N P R 4'70-3105-600 H 30 POS, 10.5 HIGH, REC ASSY - RoHS COMPLIANT BALL ALL 10.5 29 50.75 | 56.81 470-3155-100 H 30 POS, 18.5 HIGH, REC ASSY - TIN/LEAD BALL ALL 15.5 29 50.75 | 56.81 470-3155-600 H 30 POS, 15.5 HIGH, REC ASSY - RoHS COMPLIANT BALL ALL 5.5 29 50.75 | 56.81 470-3205-100 H 30 POS, 20.5 HIGH, REC ASSY - TIN/LEAD BALL ALL 20.5 29 50.75 | 56.81 470-3205-600 H 30 POS, 20.5 HIGH, REC ASSY - RoHS COMPLIANT BALL ALL 20.5 29 50.75 | 56.81 470-3235-100 H 30 POS, 23.5 HIGH, REC ASSY - TIN/LEAD BALL ALL 23.5 29 50.75 | 56.81 B 470-3235-101 H 30 POS, 23.5 HIGH, REC ASSY - TIN/LEAD BALL 1,3,5,7,9,11,13,15,17,19 .21,23,25,27,29 23.5 29 50.75 | 56.81 470-3235-102 H 30 POS, 23.5 HIGH, REC ASSY - TIN/LEAD BALL 1 THRU 26,28,30 23.5 29 50.75 | 56.81 4'70-3235-600 H 30 POS, 23.5 HIGH. REC ASSY - RoHS COMPLIANT BALL ALL 23.5 29 50.75 | 56.81 4'70-3235-601 H 30 POS, 23.5 HIGH, REC ASSY - RoHS COMPLIANT BALL 1,3,5.7,9,11,13.15,17,19 ,21,23,25,27,29 23.5 29 50.75 | 56.81 4'70-3235-602 H 30 POS, 23.5 HIGH, REC ASSY - RoHS COMPLIANT BALL 1 THRU 26,28,30 23.5 29 50.75 | 56.81 4'70-5105-100 H 25 POS, 10.5 HIGH, REC ASSY - TIN/LEAD BALL ALL 10.5 24 42.00 | 48.06 470-5105-600 H 25 POS, 10.5 HIGH, REC ASSY - RoHS COMPLIANT BALL ALL 10.5 24 42.00 | 48.06 470-5155-100 H 25 POS, 15.5 HIGH, REC ASSY - TIN/LEAD BALL ALL 5.5 24 42.00 | 48.06 4'70-5155-101 H 25 POS, 15.5 HIGH, REC ASSY - TIN/LEAD BALL 1 THRU 21, 23, 25 15.5 24 42.00 | 48.06 <q 470-5155-600 H 25 POS, 15.5 HIGH, REC ASSY - RoHS COMPLIANT BALL ALL 15.5 24 42.00 | 48.06 470-5155-601 H 25 POS, 15.5 HIGH, REC ASSY - RoHS COMPLIANT BALL 1 THRU 21, 23, 25 5.5 24 42.00 | 48.06 2 ns ~ ~~] . So ~] v un Oo Oo DESIGN 7707799 TOLERANCES D. MCNAMARA Amphenol TCS 0.0 0.25 | prawn o6v2tv2 A Division of Amphenol Corporation wo? 0.00 10.3 RJ MCISAAC 200 Innovative Way, Nashua, NH 03062 608.879.9000 : CHK 06721702 TITLE a 0.000 | + - J.MARVIN RECEPTACLE MODULE ASSEMBLY Ts APvD oz/oer200n NEXLEV CONNECTOR ANGLES | +- J. MARVIN | papt no. REV UNLESS OTHERWISE SPECIFIED DIMENSIONS SEE TABLE ARE IN MM,DECIMAL MAKER IS PERIOD DRAW ING NO. REV =} C-470-1075-500 L CUSTOMER USE Proeassem P1002-PT-HSG-CAP-ASM10X13X30 | 4.14 INTERPRET PER ASME Y14.5M DRAW ING P1002-PD-HSG-CU_W_CAP .dwg 1.68 CODE IDENT 31413 size B [SCALE 2/4 | SHEET 3 OF 9 A 3 2 i4 DRW NO. SH REV C-470-1075-500 4 L ZONE |REV SCR NUMBER DESCRIPTION BY DATE APPROVED SEE SHEET 1 B PART NO. 470-0001-074 (14.00) PICK-UP AREA (HOUSING VACUUM CAP- REMOVE AFTER ASSY TO PCB) Oo (20.00) 0.725 |c] @ <q c (21.30) DETAIL B q SCALE 4/1 1.75 1 ne 4 i 3 ti t et l ] l = (H) . a | / \ { wa | i Lo S / Ling Typ roences [$7 4,| Amphenol TCS ae. 0.0 | +0.25 [oaawn osanon A Division of Amphenol Corporation a: 25 MAX PROTRUSION 0.00 [40.19 ,__\-WPAAC | 200 tenovarive Way, Nashua, NH c8082 03.870-2000 0.05 MIN PROTRUSION SEE DETAIL B 0.000 |e. | MARVIN | "'"ReCEDTACLE MODULE ASSEMBLY |= tw 0n06/200: NEXLEV CONNECTOR ANGLES | +- J. MARVIN | papt no, REV UNLESS OTHERWISE SPECIFIED DIMENSIONS SEE TABLE ARE IN MM,DECIMAL MAKER IS PERIOD =} DRAW ING NO. 6 -470-1075-500 REV INTERPRET PER ASHE Y16 5 SMW ING ProeaSSeM P1002-PT-HSG-CAP-ASM10X13X30 | 4.14 P1002-PD-HSG-CU_W_CAP .dwg 1.68 CODE IDENT 31413 | SIZE_B [SCALE 2/1 | SHEET 4 OF 9 : A | :3 DRW NO. SH REV C-470-1075-500 5 L ZONE |REV SCR NUMBER DESCRIPTION BY DATE APPROVED SEE SHEET 1 B h#N X ]|1.75 | = (P) _+ m (0.88) TYP <4 H (1.01) G0.35@ IC SGM iy = (1.20) AL (6.00) \ 80 co NN (2.75) Oo o 8 X [1.50 6 % | 9 x [7.50 3 = (12.00) (10.35) % 9 |) = (13.50) _ oO O ae \ Co $0 cof 5 {2.59 bs (1.20) +| (R) - ~ Touerances |" Vevimara| Amphenol TCS 0.0 | +0.25 [oaawn osanon A Division of Amphenol Corporation 2 RJ MCISAAC | 290 innoventve Wey, Nashua, NH.c90e2 03.879.2000 | ~" 0.00 +0.13 BOTTOM VIEW OF CONNECTOR on __ RECEPTACLE. WODULE ASSEMBLY = ANGLES | +- _ Te MARVIN PART NO. REV UNLESS OTHERWISE SPECIFIED DIMENSIONS SEE TABLE ARE IN MM,DECIMAL MAKER IS PERIOD DRAW ING NO. REV =} C -470-1075-500 L INTERPRET PER ASME Y14.5M CODE IDENT 31413 CUSTOMER USE DRAW ING ProeaSseH P1002-PT-HSG-CAP-ASM10X13X30 | 4.14 P1002-PD-HSG-CU_W_CAP .dwg SIZE B [SCALE 2/1 | SHEET 5 OF 9 i 2 14 3 DRW NO. SH REV C-4'70-1075-500 6 L ZONE |REV SCR NUMBER DESCRIPTION BY DATE APPROVED SEE SHEET | B CONNEC TOR OUTLINE (REF) M+N X |1.75 | = (P) 2.59 > <q 1,75 SEE DETAIL: LANDING PAD LAYOUT 2x g1.25 TYP (SHEET 6) DRILLED HOLE | p~ a | opo50 5%0%0%0%0%0%02o%Po%o%o%o%oo? N. seececakecocePecaee ce taeecocaeecotneece \ 00000000 0000000 0 0.0.0 = (10.35) 155967338069 Pn eho Po Career eoo%e | | 2.15 = 059525250570 25P5 907070 P0%070 07080 | oO | FP PaO ara a nar ara nPaPaloPo | ot z Y 7000%0000000000 7000 dooGy Z SO 3S uw un Oo ID | AY ~ - RY - Touerances |" Vevimara| Amphenol TCS 0.0 | +0.25 [oaawn osanon A Division of Amphenol Corporation a: RJ MCISAAC | 200 innovative Way, Nashua, NH 09082 603.879.9000 PCB LANDING PAD LAYOUT 0.00 | 40.13 ~ - CONNECTOR SIDE 0.000 | + - J.MARVIN RECEPTACLE MODULE ASSEMBLY <= hPvD 02/06/2004 NEXLEV CONNECTOR ANGLES | +- J. MARVIN | papt no. REV UNLESS OTHERWISE SPECIFIED DIMENSIONS SEE TABLE ARE IN MM,DECIMAL MAKER IS PERIOD DRAW ING NO. REV =} C-470-1075-500 L INTERPRET PER ASME Y14.5M CODE IDENT 31413 CUSTOMER USE DRAW ING ProeaSseH P1002-PT-HSG-CAP-ASM10X13X30 | 4.14 P1002-PD-HSG-CU_W_CAP .dwg SIZE B [SCALE 2/1 | SHEET 6 OF 9 14 3 DRW NO. SH REV C-4'70-1075-500 7 L ZONE |REV SCR NUMBER DESCRIPTION BY DATE APPROVED SEE SHEET 1 B - ss + _ 1.75 TYP | + 0.88 TYP <q D0.60 TYP [ TYP J _O1 1.50 TYP PoP oS O , O_O 0-0-0 3 O_0_0 z O_0_0 ns 8 X |1.50 PoP 0 9 X 1.50 A . ~~] - (12.00) PoP 0 = (13.50) 0-0-0 a O_0_0 ~J Oo _0_0 uw O_0_0 un O_0_0 oO 0 0 0 ~ o-0 @ Touerances |" Vevimara| Amphenol TCS 0.0 +0.25 [opawn oaoven A Division of Amphenol Corporation v 0.00 140.73 RJ MCISAAC | 290 innovative Way, Nashua, NH030e2 03.879.2000 | DETAIL: LANDING PAD LAYOUT 0.000 |- | SMARVIN| "'"pECEPTACLE MODULE ASSEMBLY | SEE TECHNICAL BULLETIN TB-2082 mara APvD 02/06/2004 NEXLEV CONNECTOR FOR LANDING PAD SHAPE, MASKING, ROUTING : J- MARVIN | part wo. REV UNLESS OTHERWISE SPECIFIED DIMENSIONS SEE TABLE AND OTHER DETAILS ARE IN MM,DECIMAL MAKER IS PERIOD SCALE 471 =} a 470-1075-500 T INTERPRET PER ASME Y14.5M C U baw " S E ProeaSSEM = P1002-PT-HSG-CAP-ASM10X 13X30 11k . P1002-PD-HSG-CU_W_CAP .dwg 1.68 CODE IDENT 31413 SIZE_B [SCALE 2/1 | SHEET 7 OF 9 | A | :4 3 DRW NO. SH REV C-4'70-1075-500 8 L ZONE |REV SCR NUMBER DESCRIPTION BY DATE APPROVED SEE SHEET 1 6555555555544 4644446464 4 3333333333 2222222222721111111111 09876543210987654321098765432109876543210987654321098765432 1 B 0 0.0.0.0.0.0.0.0.0._.0.0.0.0.0.0.0._.0.0.0._0._0._0._0_.0._.0._0._0_0_OwW 0. 0._.0_.0._.0._.0._.0._.0._.0._.0._.0._.0._.0._.0._.0._.0._.0._.0._.0._.0._.0._.0.0._.0._.0._.0_0._0._0_0_ V 0 0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0._0_0u 0. 0._.0_.0._.0._.0._.0._.0._.0._.0._.0._.0._.0_.0._.0_.0._.0._.0._.0._.0._.0._.0._.0._.0_0._0._0_0_0_0_T 0 0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0._.0.0.0._0_0_OR 0.-0._.0_.0_.0_.0_.0._.0._.0._.0_0._0._.0_.0._.0_.0._0._.0._.0._0._0._.0_.0._0_0_0_0_0_0_0_P 0 0.0. 0.0.0.0. .0.0.0. 0.0._.0._.0._0._0.0._.0._.0._0._.0._.0._0._.0._0._.0_0_0_0_ON 0 0_.0_.0_.0_.0_.0._.0_.0._.0._.0._0._.0_.0._0_0._.0._0_0_0_0._.0_0._0_0._0_0_0_0_0-_sM 0. -0_.0.0._.0._.0._.0._.0._.0._.0._.0._.0._.0._.0._.0._.0._.0._.0._.0._.0._.0._.0._.0._.0._.0._.0._.0._0_0_01 0. 0.0.0.0.0.0.0._.0._0._.0.0.0._.0._.0.0._.0._.0._0.0.0._0._.0._.0._0._.0._.0._0._0_0_k 0. 0_.0_.0._.0._.0._.0._.0._.0._.0._.0._.0._.0_.0._.0._.0._.0._.0._.0._.0._.0._.0._.0._.0._.0._.0._.0_0._0_0 3 0. 0.0.0.0.0.0._.0._.0._.0._.0._.0.0._.0._.0.0._.0._.0._0._.0._.0._0._0.0._.0._0._0._0._0_0_ 4 <q 0. 0_.0_.0_.0._.0._.0._.0._.0._.0._.0._.0._.0_.0._.0._0._.0._0._0._0_0._.0_.0_0._0._0._0_0_0_0,q 0 0.0. 0.0.0.0._0._0.0._.0._0._0._.0._.0._.0._.0._0._.0._0._.0._0._.0._.0._0._.0._0._0_0_0_ Ff 0. 0_.0_.0_.0._.0_.0._.0_.0._0_0_.0._0_0._0_0._0_0_0_0_0._0_0_0_0_0_0_0_0_OFf 0. 0.0_.0.0._.0._.0._.0._.0._.0._.0._.0._.0._.0._.0._.0._.0._.0._.0._.0._.0._.0._.0._.0._.0._.0._.0._0._0_0-_ 95 0 0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0._0.0._0._0_0 0. 0._.0._.0._.0._.0._.0._.0._.0._.0._.0._.0._.0._.0._.0._.0._.0._.0._.0._.0._.0._.0._.0._.0._.0._.0._0_0._0_0O- 8 ooo0o0oclcWcl odclUCOCUClc OC OCC OUCcOUCcOCcOUCcUOCUC OC OCcOCOOoOCcOUc CWC OUUCcOCOCOOCOOUUCcUOULcOUlC Od 100 SIGNAL PINS. 90 PWR/GND 10 WAFERS | 200 SIGNAL PINS. 180 PWR/GND 2 20 WAFERS | z me 250 SIGNAL PINS. 225 PWR/GND = 25 WAFERS | 1 So 300 SIGNAL PINS. 270 PWR/GND an 30 WAFERS On Oo Oo CONNECTOR SIDE OF PCB Touerances |" Vevimara| Amphenol TCS PIN ASSIGNMENT 0.0 | +0.25 [ame conven A Division of Amphenol Corporation 2 SCALE: 4/1 300 lan RJ MCISAAC | 200 innovative Way, Nashua, NHos0e2 03.679.9000 | 7 : CHK 06721702 TITLE a 0.000 | + - J.MARVIN RECEPTACLE MODULE ASSEMBLY s< APvD oz/06/2001 NEXLEV CONNECTOR ANGLES | -t- J. MARVIN | papt no, REV UNLESS OTHERWISE SPECIFIED DIMENSIONS SEE TABLE ARE IN MM,DECIMAL MAKER IS PERIOD =} prawn C-470-1075-500 t INTERPRET PER ASME Y14.5M Se rt est ProeasseH P1002-PT-HSG-CAP-ASM10X13X30 | 4.14 . AW IN P1002-PD-HSG-CU_W_CAP .dwg 1.68 CODE IDENT 31413 size B [SCALE 2/4 | SHEET 8 OF 9 4 3 | 2 iINTERPRET PER ASME Y14.5M CODE IDENT 31413 CUSTOMER USE DRAW ING Proeassem P1002-PT-HSG-CAP-ASM10X 13X30 P1002-PD-HSG-CU_W_CAP .dwg SIZE B [SCALE 2/1 | SHEET 9 OF 9 1 3 DRW NO. SH REV C-4'70-1075-500 9 L ZONE |REV SCR NUMBER DESCRIPTION BY DATE APPROVED SEE SHEET 1 09 8 7 6 5 4 3214 #40 9 8 7 6 5 4 3 2 1 09 8 JT 6 5 4 3 2 1 0.0.0._.0.0.0.0.0.0.0.0.0.0.0._.0._0.0._.0.0.0._.0._0._0._.0._.0._0._0._0_0_OK B 0. 0.0_0._0._.0._0._.0._.0._0.0._.0._.0.0._.0._.0._.0._.0._.0._.0._.0._.0._.0._.0_0._.0._0_0_0_0 0000.00 00.000. 0000000 0.0.00 0.0.00. 0.0.0.0) 0. 0_.0_0_.0._0._.0._0._.0._.0._.0._.0._.0.0._.0._.0._.0._.0._.0._.0._.0_.0._0._.0_0._.0._0_0._0_0 0 0.0.00 00.00 00.00.0.0.0.0.00.0.0.0.0.0.0.0._0._0._0_OH 0. 0_0._0.0_.0._0._0._.0._.0._.0_.0._.0._0._.0._.0._0._.0._.0._0._.0._.0_0._.0_.0._0._0_0_0_0 0000000000. 00.000 00.0.0.0.0.0.0.0.0.0. 0.0.0. 06 0. 0.0._0.0_.0._0._0._.0._.0._0._.0._.0._0._.0._.0._0._.0._.0._.0._0_0_.0._0_0._0_0_0_0_0 0.0.0. 0.00000 0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0._0._0_OF 0. 0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0._0._0.0._0._0._0._0._0._0._0._0_0 0000000000000 0.0.0 0.0.0.0.0.0.0.0.0.0.0.0.0_0E 0. 0.0_.0.0._0._0.0.0.0.0._.0._.0.0.0.0.0.0.0.0.0._.0.0._.0._.0._0._.0._0._0_0 00000000000 00.0000 0.0.0.0.0.0.0.0.0.0.0.0_00 <q 0.0.0_.0.0_.0._.0.0._.0.0.0._.0.0.0.0._.0.0._.0.0._.0._.0._.0._.0._.0._.0._.0._0._0._0_0 00000000000 0000.00 0.000 0000000 0 0C 0. 0_.0_.0._0_.0._.0._0._.0._.0._.0._.0._.0.0._.0._.0._.0._.0._.0._.0._.0_0._.0._.0_0._.0._0_0._0_0 00.0.0 0.000.00. 000.0 0000.0.00.0.0.0.0.0.0.0.0_.0B 0. 0._.0_.0._.0_.0._.0._0._.0._.0._.0._.0._.0._.0._.0._.0._.0._.0._.0._.0._.0_.0._.0._.0_.0._.0._0_0_0_0 co op VQ CPC PVO CDE VC PC EOF CFC 290 90%" 100 SIGNAL PINS. 90 PWR/GND 10 WAFERS | 200 SIGNAL PINS. 180 PWR/GND 20 WAFERS | 3 = 250 SIGNAL PINS. 225 PWR/GND oF 25 WAFERS | FS Oo 300 SIGNAL PINS. 270 PWR/GND 3 30 WAFERS o uw un Oo Oo ALTERNATE PIN NUMBERING TOLERANCES | DESIGN "70708 Amphenol TCS one OME UL PCB) 0.0 0.25 | neawn 06/21/02 A Division of Amphenol Corporation o% / 500 |aous RJ MCISAAC | 200 Wnnovetive Way, Nashua, NH 08062 603.879.9000 : CHK 06721702 TITLE a 0.000 | + - J.MARVIN RECEPTACLE MODULE ASSEMBLY <= hPvD 02/06/2004 NEXLEV CONNECTOR ANGLES | +- J. MARVIN | papt no. REV UNLESS OTHERWISE SPECIFIED DIMENSIONS SEE TABLE ARE IN MM.DECIMAL MAKER IS PERIOD DRAW ING NO. REV =} C-470-1075-500 L