09 33 000 9954 03
.
33
Han
E / EE
Han®48 E · Han®48 ES 500 V 16 A
1–24 09 33 024 2601 09 33 024 2701
25–48 09 33 024 2611 09 33 024 2711
1–24 09 33 024 2616 09 33 024 2716
25–48 09 33 024 2626 09 33 024 2726
1–24 09 33 024 2602 09 33 024 2702
25–48 09 33 024 2612 09 33 024 2712
1–24 09 33 024 2672 09 33 024 2772
1–24 09 33 024 2672 09 33 024 2772
Inserts
Number of contacts
48
Part No.
Identification Series Male insert (M) Female insert (F) Drawing Dimensions in mm
Size 48 B
Panel cut out for inserts
for use without hoods/housings
Contact arrangement View from termination side
Dimensions for inserts see page 03.26
Screw terminal Han E®
with wire protection
Cage-clamp terminal
Han®ES
Crimpanschluss Han E®
Order contacts separately
Cage-clamp terminal
Han®ESS
two terminals per contact
Wire gauge Part No.
Identification (mm2) Male contacts Female contacts Drawing Dimensions in mm
Crimp contacts
0.14-0.37
*09 33 000 6127* *09 33 000 6227*
Power contacts 0.5 09 33 000 6121 09 33 000 6220
0.75 09 33 000 6114 09 33 000 6214
1.0 09 33 000 6105 09 33 000 6205
silver plated 1.5 09 33 000 6104 09 33 000 6204
2.5 09 33 000 6102 09 33 000 6202
309 33 000 6106 09 33 000 6206
409 33 000 6107 09 33 000 6207
0.14-0.37
*09 33 000 6117* *09 33 000 6217*
0.5 09 33 000 6122 09 33 000 6222
0.75 09 33 000 6115 09 33 000 6215
gold plated 1.0 09 33 000 6118 09 33 000 6218
1.5 09 33 000 6116 09 33 000 6216
2.5 09 33 000 6123 09 33 000 6223
4.0 09 33 000 6119 09 33 000 6221
Relay contact 0.75-1 09 33 000 6109
silver plated 1.5 09 33 000 6110
2.5 09 33 000 6111
Stripping
Identification Wire gauge length
no groove 0.14-0.37 mm2AWG 26-22 7,5 mm
no groove 0.5 mm2AWG 20 7.5 mm
1 groove* 0.75 mm2AWG 18 7.5 mm
1 groove 1.mm2AWG 18 7.5 mm
2 grooves 1.5 mm2AWG 16 7.5 mm
3 grooves 2.5 mm2AWG 14 7.5 mm
wide groove 3.0 mm2AWG 12 7.5 mm
no groove 4.mm2AWG 12 7.5 mm
Operating contact
Identification
Crimp contact identification
* on the back crimp collar
Relay contact
Stock items in bold type* only to be used with BUCHANAN crimping tool 09 99 000 0001
and adjustment gauge 09 99 000 0203
Coding Pin
To avoid accidental incorrect mating of adjacent connectors a coding
system is required. Coding is effected – by means of a code pin. For this rea-
son a female contact has to be inserted into the selected chamber.The code
pin has to be assembled into this contact from the
mating side. The opposite male contact is omitted.
