DATA SHEET ZENER DIODES RD2.0FM to RD120FM ZENER DIODES 1 W 2 PIN POWER MINI MOLD PACKAGE DIMENSIONS DESCRIPTION (Unit: mm) Type RD2.0FM to RD120FM series are 2 pin power mini mold package zener diodes possessing an 4.7 0.3 allowable power dissipation of 1 W. 1.1 0.1 0.8 0.1 4.3 0.1 QUALITY GRADE 0 to 0.15 Standard. Please refer to "Quality Grades On NEC Semiconductor Devices" (Document number C11531E) published by 1.3 0.2 1.55 0.1 1.4 0.1 grade on the devices and its recommended applications. 2.5 0.1 NEC Corporation to know the specification of quality FEATURES * Sharp breakdown characteristics Cathode Indication * VZ: Applied E24 standard APPLICATIONS Circuits for, constant voltage, constant current, waveform clipper, surge absorber, etc. ABSOLUTE MAXIMUM RATINGS (TA = 25C) Power Dissipation P 1 W Forward Current IF 200 mA Junction Temperature Tj 150 C Storage Temperature Tstg -55 to +150 C The information in this document is subject to change without notice. Before using this document, please confirm that this is the latest version. Not all devices/types available in every country. Please check with local NEC representative for availability and additional information. Document No. D16083EJ1V0DS00 (1st edition) Date Published March 2002 NS CP(K) Printed in Japan (c) 2002 RD2.0FM to RD120FM ELECTRICAL CHARACTERISTICS (TA = 25 2C) Type Number Class (1/2) Zener Voltage Dynamic Impedance Reverse Current VZ (V) Note1 ZZ () Note2 IR (A) MIN. MAX. IZ (mA) MAX. IZ (mA) MAX. VR (V) RD2.0FM B 1.9 2.2 5 140 5 200 0.5 RD2.2FM B 2.1 2.4 5 140 5 200 0.7 RD2.4FM B 2.3 2.6 5 140 5 200 1.0 RD2.7FM B 2.5 2.9 5 140 5 150 1.0 RD3.0FM B 2.8 3.2 5 140 5 100 1.0 RD3.3FM B 3.1 3.5 5 140 5 80 1.0 RD3.6FM B 3.4 3.8 5 140 5 60 1.0 RD3.9FM B 3.7 4.1 5 140 5 40 1.0 RD4.3FM B 4.0 4.5 5 140 5 20 1.0 RD4.7FM B 4.4 4.9 5 100 5 20 1.0 RD5.1FM B 4.8 5.4 5 100 5 20 1.0 RD5.6FM B 5.3 6.0 5 70 5 20 1.5 RD6.2FM B 5.8 6.6 5 40 5 20 3.0 RD6.8FM B 6.4 7.2 5 25 5 20 3.5 RD7.5FM B 7.0 7.9 5 25 5 20 4.0 RD8.2FM B 7.7 8.7 5 25 5 20 5.0 RD9.1FM B 8.5 9.6 5 25 5 20 6.0 RD10FM B 9.4 10.6 5 20 5 10 7.0 RD11FM B 10.4 11.6 5 20 5 10 8.0 RD12FM B 11.4 12.6 5 25 5 10 9.0 RD13FM B 12.4 14.1 5 30 5 10 10 RD15FM B 13.8 15.6 5 30 5 10 11 RD16FM B 15.3 17.1 5 40 5 10 12 RD18FM B 16.8 19.1 5 45 5 10 13 RD20FM B 18.8 21.2 5 55 5 10 15 RD22FM B 20.8 23.3 2 55 2 10 17 RD24FM B 22.8 25.6 2 70 2 10 19 RD27FM B 25.1 28.9 2 80 2 10 21 RD30FM B 28.0 32.0 2 80 2 10 23 RD33FM B 31.0 35.0 2 80 2 10 25 RD36FM B 34.0 38.0 2 90 2 10 27 RD39FM B 37.0 41.0 2 130 2 10 30 RD43FM B 40.0 45.0 2 150 2 5 33 RD47FM B 44.0 49.0 2 170 2 5 36 RD51FM B 48.0 54.0 2 220 2 5 39 RD56FM B 53.0 60.0 2 220 2 5 43 RD62FM B 58.0 66.0 2 220 2 5 47 RD68FM B 64.0 72.0 2 230 2 5 52 Note 1. VZ is tested with pulsed (40 ms). 2. ZZ is measured at IZ by given a very small A.C. signal. 2 Data Sheet D16083EJ1V0DS RD2.0FM to RD120FM ELECTRICAL CHARACTERISTICS (TA = 25 2C) Type Number Class (2/2) Zener Voltage Dynamic Impedance Reverse Current VZ (V) Note1 ZZ () Note2 IR (A) MIN. MAX. IZ (mA) MAX. IZ (mA) MAX. VR (V) RD75FM B 70.0 79.0 2 250 2 5 57 RD82FM B 77.0 87.0 2 270 2 5 63 RD91FM B 85.0 96.0 2 340 2 5 69 RD100FM B 94.0 106.0 2 430 2 5 76 RD110FM B 104.0 116.0 2 530 2 5 84 RD120FM B 114.0 126.0 2 620 2 5 91 Note 1. VZ is tested with pulsed (40 ms). 2. ZZ is measured at IZ by given a very small A.C. signal. Data Sheet D16083EJ1V0DS 3 RD2.0FM to RD120FM TYPICAL CHARACTERISTICS (TA = 25C) Fig.1 P - TA RATING P - Power Dissipation - W 1.0 30 x 8 x 0.7 P.C.B (Ceramic) 20 x 30 x 1.6 P.C.B (Glass Epoxy) 0.5 Free Air 0 100 200 TA - Ambient Temperature - C RD6.2FM RD5.6FM RD5.1FM 100 m RD4.7FM RD4.3FM RD3.9FM RD3.6FM 10 m RD3.3FM RD3.0FM RD2.7FM 1m RD2.4FM RD2.2FM 100 RD2.0FM RD6.8FM RD8.2FM RD7.5FM 10 m 1m 10 1 100 10 1 100 n 100 n 10 n 10 n 1n 0 1 2 3 4 5 6 7 8 9 VZ - Zener Voltage - V (a) 4 RD11FM RD12FM RD10FM RD13FM RD9.1FM 100 m IZ - Zener Current - A IZ - Zener Current - A Fig.2 IZ - VZ CHARACTERISTICS (a to f) Data Sheet D16083EJ1V0DS 1n 0 7 8 9 10 11 12 13 14 15 VZ - Zener Voltage - V (b) RD2.0FM to RD120FM 100 m RD15FM 100 m RD16FM RD18FM 1m 10 m 100 1m IZ - Zener Current - A IZ - Zener Current - A 10 m 10 1 100 10 100 n 1 10 n 100 n 1n 10 n 1n 0 11 12 13 14 15 16 17 18 19 RD36FM RD39FM RD33FM 100 m RD51FM 10 m IZ - Zener Current - A 1m IZ - Zener Current - A RD120FM RD110FM RD100FM RD43FM RD47FM RD30FM 100 10 1 10 m RD56FM RD62FM 1m RD68FM RD75FM 100 RD82FM RD91FM 10 1 100 n 100 n 10 n 10 n 1n 0 18 20 22 24 26 28 VZ - Zener Voltage - V (d) VZ - Zener Voltage - V (c) 100 m RD24FM RD22FM RD27FM RD20FM 0 25 30 35 40 1n VZ - Zener Voltage - V (e) 0 30 50 70 90 VZ - Zener Voltage - V (f) Data Sheet D16083EJ1V0DS 5 RD2.0FM to RD120FM 0.14 56 0.12 48 0.10 40 32 0.08 %/C 0.06 24 mV/C 0.04 16 0.02 8 0 0 -0.02 -8 -0.04 -16 -0.06 -24 -0.08 Z - VZ Temperature Coefficient - mV/C Z - VZ Temperature Coefficient - %/C Fig.3 Z - VZ CHARACTERISTICS -32 IZ = 5 mA, 2 mA -0.10 4 8 12 16 20 24 28 32 VZ - Zener Voltage - V 36 40 44 48 52 Fig.4 ZZ - IZ CHARACTERISTICS 1000 TA = 25C TYP. 1000 ZZ - Zener Impedance - 100 5. RD 10 M 1F ZZ - Zener Impedance - 100 TA = 25C TYP. RD 5.6 10 RD47FM RD20FM RD15 FM FM 1 1 RD1 0FM RD6.8FM RD6.2FM RD7.5FM 0.1 6 1 10 100 0.1 1 10 IZ - Zener Current - mA IZ - Zener Current - mA (a) (b) Data Sheet D16083EJ1V0DS 100 RD2.0FM to RD120FM Fig.5 TRANSIENT THERMAL IMPEDANCE CHARACTERISTICS Zth - Transient Thermal Impedance - C/W 1000 312C/W 100 10 1 0.1 1m 10 m 100 m 1 10 100 t - Time - sec Fig.6 SURGE REVERSE POWER RATINGS TA = 25C Repetitive PRSM PRSM - Surge Reverse Power - W 10000 tT 1000 100 10 1 1 10 100 1m 10 m 100 m t - Pulse Width - sec Data Sheet D16083EJ1V0DS 7 RD2.0FM to RD120FM * The information in this document is current as of March, 2002. The information is subject to change without notice. For actual design-in, refer to the latest publications of NEC's data sheets or data books, etc., for the most up-to-date specifications of NEC semiconductor products. Not all products and/or types are available in every country. Please check with an NEC sales representative for availability and additional information. * No part of this document may be copied or reproduced in any form or by any means without prior written consent of NEC. NEC assumes no responsibility for any errors that may appear in this document. * NEC does not assume any liability for infringement of patents, copyrights or other intellectual property rights of third parties by or arising from the use of NEC semiconductor products listed in this document or any other liability arising from the use of such products. No license, express, implied or otherwise, is granted under any patents, copyrights or other intellectual property rights of NEC or others. * Descriptions of circuits, software and other related information in this document are provided for illustrative purposes in semiconductor product operation and application examples. The incorporation of these circuits, software and information in the design of customer's equipment shall be done under the full responsibility of customer. NEC assumes no responsibility for any losses incurred by customers or third parties arising from the use of these circuits, software and information. * While NEC endeavours to enhance the quality, reliability and safety of NEC semiconductor products, customers agree and acknowledge that the possibility of defects thereof cannot be eliminated entirely. To minimize risks of damage to property or injury (including death) to persons arising from defects in NEC semiconductor products, customers must incorporate sufficient safety measures in their design, such as redundancy, fire-containment, and anti-failure features. * NEC semiconductor products are classified into the following three quality grades: "Standard", "Special" and "Specific". The "Specific" quality grade applies only to semiconductor products developed based on a customer-designated "quality assurance program" for a specific application. The recommended applications of a semiconductor product depend on its quality grade, as indicated below. Customers must check the quality grade of each semiconductor product before using it in a particular application. "Standard": Computers, office equipment, communications equipment, test and measurement equipment, audio and visual equipment, home electronic appliances, machine tools, personal electronic equipment and industrial robots "Special": Transportation equipment (automobiles, trains, ships, etc.), traffic control systems, anti-disaster systems, anti-crime systems, safety equipment and medical equipment (not specifically designed for life support) "Specific": Aircraft, aerospace equipment, submersible repeaters, nuclear reactor control systems, life support systems and medical equipment for life support, etc. The quality grade of NEC semiconductor products is "Standard" unless otherwise expressly specified in NEC's data sheets or data books, etc. If customers wish to use NEC semiconductor products in applications not intended by NEC, they must contact an NEC sales representative in advance to determine NEC's willingness to support a given application. (Note) (1) "NEC" as used in this statement means NEC Corporation and also includes its majority-owned subsidiaries. (2) "NEC semiconductor products" means any semiconductor product developed or manufactured by or for NEC (as defined above). M8E 00. 4