MKP386M Snubber www.vishay.com Vishay Roederstein Metallized Polypropylene Film Capacitor Radial Snubber Type FEATURES * Reduce EMI by clamping voltage and current ringing * High pulse strength (dV/dt up to 2500 V/s) * Low inductance construction (low ESL) * Low ESR * Material categorization: for definitions of compliance please see www.vishay.com/doc?99912 APPLICATIONS * * * * Photovoltaic and wind inverters Motor drives Frequency converters Direct mount on IGBT modules QUICK REFERENCE DATA Rated capacitance range 0.047 F to 10 F Capacitance tolerance 5 %/ 10 % Rated (DC) voltage, UNDC 700 V, 850 V, 1000 V, 1250 V, 1600 V, 2000 V, 2500 V Climatic testing class 55/105/56 Rated temperature 85 C Maximum permissible case temperature 105 C Rated (AC) voltage 420 V, 400 V to 450 V, 425 V to 500 V, 450 V to 550 V, 450 V to 600 V, 700 V, 800 V Reference standards IEC 60384-17 Dielectric Polypropylene film Electrodes Metallized film Construction Series construction Encapsulation Flame retardant plastic case and epoxy resin sealed Terminals Tinned coated copper Self inductance (LS) < 0.7 nH per mm of lead spacing Withstanding DC voltage between terminals (1) 1.6 URDC for 60 s (maximum rise time 1000 V/s; cut off current 10 mA) Test voltage between terminals and case 1.4 URAC + 2000 VDC for 60 s Insulation resistance RC between leads, at 500 V after 1 min: > 100 G for C 0.33 F > 30 000 s for C > 0.33 F Performance grade Grade 1 (long life) Stability grade Grade 2 Life time expectancy Operation life > 300 000 h - failure rate < 5 FIT (40 C and 0.5 x UR) C-value, tolerance code, rated voltage, manufacturer's emblem, code for dielectric material, manufacturer's type designation, year and week, manufacturer's location Marking Notes * For more detailed data and test requirements contact dc-film@vishay.com * For general information like characteristics and definitions used for film capacitors follow the link: www.vishay.com/doc?28147 (1) See document "Voltage Proof Test for Metalized Capacitors" (www.vishay.com/doc?28169) DC VOLTAGE RATINGS URDC 700 VDC 850 VDC 1000 VDC 1250 VDC 1600 VDC 2000 VDC 2500 VDC URAC 420 VAC 450 VAC 500 VAC 550 VAC 600 VAC 700 VAC 800 VAC Revision: 08-Jun-16 Document Number: 28170 1 For technical questions, contact: dc-film@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 MKP386M Snubber www.vishay.com Vishay Roederstein DIMENSIONS in millimeters AND AVAILABLE TERMINAL VERSIONS T2 P1 0.8 0.05 6 0.1 6 0.1 D 6.8 1 P2 P2 D 14 min. 8.2 1 0.8 0.05 8.2 1 15 1 14 min. P1 6.8 1 T1 15 1 61 61 h l1 h l1 w1 P1 P2 0.5 0.5 28 23 43 38 L 44 58 T3 + 0.5 -1 w1 D min. 10.2 25.2 L 44 58 15 0.3 + 0.5 -1 P1 P2 0.5 0.5 24.5 19.5 39.5 34.5 T4 3 0.5 D min. 6.2 21.2 0.5 5 0.5 0.5 h + 0.5 -1 h w1 l1 w1 l1 13.5 0.2 + 0.5 -1 A A L 10 0.3 P1 T5 33.5 44 58 P1 0.5 47 57 72 A 1 57 67 82 D P2 P1 P2 0.5 0.5 28 22 43 37 D min. 11 26 A 0.5 38 53 P1 P2 15 0.3 7.5 0.5 D 15 0.3 0.8 0.1 3 1.0 l1 33.5 44 58 P1 1 32.3 42.3 57.3 P2 1 22.7 32.7 47.7 D min. 11 21 36 3.2 1.0 3 1.0 w1 h + 0.5 -1 1 0.1 6.3 0.1 14.5 1 3.2 1.0 L 7.5 0.5 D 6.3 0.1 14.5 1 Revision: 08-Jun-16 L 44 58 T6 P1 6 0.1 5 0.2 5 0.2 6 0.2 P1 P2 l1 w1 h L 44 58 P1 1 32.3 47.3 P2 1 22.7 37.7 + 0.5 -1 D min. 11 26 Document Number: 28170 2 For technical questions, contact: dc-film@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 MKP386M Snubber www.vishay.com Vishay Roederstein DIMENSIONS in millimeters AND AVAILABLE TERMINAL VERSIONS T7 T8 P1 P1 P2 P2 15 0.3 15 0.3 8 0.2 D 8 0.2 D 0.8 0.1 1 0.1 6.3 0.1 6.3 0.1 12.8 max. 12.8 max. 18 1 18 1 3.5 1.0 3.5 1.0 h + 0.5 -1 h w1 l1 L 33.5 44 58 P1 1 32.3 42.3 57.3 P2 1 22.7 32.7 47.7 w1 l1 D min. 11 21 36 + 0.5 -1 P1 1 32.3 47.3 L 44 58 P2 1 22.7 37.7 D min. 11 26 COMPOSITION OF CATALOG NUMBER MULTIPLIER (nF) TOLERANCE Example 4 68 = 680 nF TYPE MKP 386 2 0.1 3 1 4 10 5 100 M 4 5% K 10 % L = 33.5 mm/44.0 mm L = 33.5 mm/44.0 mm Y 5% L = 58 mm CAPACITANCE (numerically) 68 160 J T8 SPECIAL CODE FOR TERMINAL METALLIZED POLYPROPYLENE DRAWING MINI VERSION SINGLE METALLIZED T1 VOLTAGE T2 L (mm) P1 (mm) P2 (mm) 44 28 0.5 23 0.5 58 43 0.5 38 0.5 44 24.5 0.5 19.5 0.5 58 39.5 0.5 34.5 0.5 33.5 47 0.5 - 44 57 0.5 - 1000 VDC 58 72 0.5 - 125 1250 VDC 44 28 0.5 22 0.5 160 1600 VDC 200 2000 VDC 250 2500 VDC 070 700 VDC 085 850 VDC 100 T3 T4 T5 T6 T7 T8 Revision: 08-Jun-16 J 58 43 0.5 37 0.5 33.5 32.3 1 22.7 1 44 42.3 1 32.7 1 58 57.3 1 47.7 1 44 32.3 1 22.7 1 58 47.3 1 37.7 1 33.5 32.3 1 22.7 1 44 42.3 1 32.7 1 58 57.3 1 47.7 1 44 32.3 1 22.7 1 58 47.3 1 37.7 1 DRAWING Document Number: 28170 3 For technical questions, contact: dc-film@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 MKP386M Snubber www.vishay.com Vishay Roederstein ELECTRICAL DATA AND ORDERING CODE URDC (V) 700 850 1000 CAP. (F) DIMENSION (mm) (4) W H L 0.47 0.68 1.0 1.5 2.0 2.2 3.0 3.3 4.0 4.7 5.0 22.0 22.0 22.0 22.0 22.0 22.0 30.0 30.0 30.0 30.0 30.0 30.5 30.5 30.5 30.5 38.0 38.0 46.0 46.0 46.0 46.0 46.0 0.47 0.68 0.82 1.0 1.5 2.0 2.2 3.0 3.3 4.0 22.0 22.0 22.0 22.0 22.0 22.0 22.0 30.0 30.0 30.0 4.7 5.0 6.0 7.0 8.0 10 dU/dt (V/s) Ipeak (A) 33.5 33.5 33.5 33.5 44.0 44.0 44.0 44.0 44.0 44.0 44.0 800 800 800 800 370 370 370 370 370 370 370 376 544 800 1200 740 814 1110 1221 1480 1739 1850 30.5 30.5 30.5 30.5 38.0 38.0 38.0 46.0 46.0 46.0 33.5 33.5 33.5 33.5 44.0 44.0 44.0 44.0 44.0 44.0 800 800 800 800 370 370 370 370 370 370 376 544 656 800 555 740 814 1110 1221 1480 25.0 25.0 30.0 30.0 35.0 35.0 45.0 45.0 45.0 45.0 50.0 50.0 58.0 58.0 58.0 58.0 58.0 58.0 170 170 170 170 170 170 798 849 1019 1189 1358 1698 0.47 0.56 0.68 0.82 1.0 1.2 1.5 1.8 2.0 2.2 2.5 2.7 3.3 22.0 22.0 22.0 22.0 22.0 22.0 22.0 22.0 30.0 30.0 30.0 30.0 30.0 30.5 30.5 30.5 30.5 30.5 38.0 38.0 38.0 46.0 46.0 46.0 46.0 46.0 33.5 33.5 33.5 33.5 33.5 44.0 44.0 44.0 44.0 44.0 44.0 44.0 44.0 725 725 725 725 725 340 340 340 340 340 340 340 340 341 406 493 595 725 408 510 612 680 748 850 918 1122 3.3 4.0 4.7 5.0 6.0 7.0 25.0 25.0 30.0 30.0 35.0 35.0 45.0 45.0 45.0 45.0 50.0 50.0 58.0 58.0 58.0 58.0 58.0 58.0 205 205 205 205 205 205 677 820 964 1025 1230 1435 Revision: 08-Jun-16 IRMS (2) (A) ESR (3) (m) tan 1 kHz < (10-4) URAC = 420 V; Upp = 1130 V 7.0 16.0 4.0 8.0 11.0 4.0 9.0 7.5 4.0 10.0 5.0 4.0 10.0 7.5 5.0 10.0 6.5 5.0 14.0 5.5 5.0 14.0 5.0 5.0 15.0 4.5 5.0 15.0 6.0 5.0 15.0 6.0 5.0 URAC = 450 V; Upp = 1300 V 7.5 13.0 4.0 8.5 10.0 4.0 9.0 8.5 4.0 10.0 7.0 4.0 10.0 9.0 5.0 12.0 7.0 5.0 13.0 6.0 5.0 16.0 4.5 5.0 16.0 4.0 5.0 18.0 3.5 5.0 URAC = 400 V; Upp = 1200 V 17.5 4.0 6.0 18.0 3.5 6.0 20.5 3.0 6.0 22.5 2.5 6.0 26.0 2.0 6.0 29.0 1.5 6.0 URAC = 500 V; Upp = 1400 V 7.5 13.0 4.0 8.0 11.0 4.0 9.0 9.0 4.0 9.0 7.5 4.0 10.0 6.0 4.0 10.0 10.0 5.0 11.0 8.0 5.0 12.0 6.5 5.0 14.0 6.0 5.0 15.0 5.5 5.0 15.0 5.0 5.0 16.0 4.5 5.0 18.0 3.5 5.0 URAC = 425 V; Upp = 1200 V 16.0 4.5 7.5 17.5 3.5 7.5 20.0 3.0 7.5 21.0 3.0 7.5 24.5 2.5 7.5 26.5 2.0 7.5 tan 10 kHz < (10-4) tan 100 kHz < (10-4) ORDERING CODE (1) 8.0 8.0 8.0 8.0 15.0 15.0 15.0 15.0 15.0 15.0 15.0 50 50 50 - MKP386M447070J** MKP386M468070J** MKP386M510070J** MKP386M515070J** MKP386M520070J** MKP386M522070J** MKP386M530070J** MKP386M533070J** MKP386M540070J** MKP386M547070J** MKP386M550070J** 8.0 8.0 8.0 8.0 15.0 15.0 15.0 15.0 15.0 15.0 50 50 50 50 - MKP386M447085J** MKP386M468085J** MKP386M482085J** MKP386M510085J** MKP386M515085J** MKP386M520085J** MKP386M522085J** MKP386M530085J** MKP386M533085J** MKP386M540085J** 25 25 25 25 25 25 - MKP386M547085Y** MKP386M550085Y** MKP386M560085Y** MKP386M570085Y** MKP386M580085Y** MKP386M610085Y** 8.0 8.0 8.0 8.0 8.0 15.0 15.0 15.0 15.0 15.0 15.0 15.0 15.0 50 50 50 50 50 - MKP386M447100J** MKP386M456100J** MKP386M468100J** MKP386M482100J** MKP386M510100J** MKP386M512100J** MKP386M515100J** MKP386M518100J** MKP386M520100J** MKP386M522100J** MKP386M525100J** MKP386M527100J** MKP386M533100J** 25 25 25 25 25 25 - MKP386M533100Y** MKP386M540100Y** MKP386M547100Y** MKP386M550100Y** MKP386M560100Y** MKP386M570100Y** Document Number: 28170 4 For technical questions, contact: dc-film@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 MKP386M Snubber www.vishay.com Vishay Roederstein ELECTRICAL DATA AND ORDERING CODE URDC (V) 1250 1600 2000 CAP. (F) DIMENSION (mm) (4) W H L 0.33 0.39 0.47 0.56 0.68 0.82 1.0 1.2 1.5 1.8 2.0 2.2 22.0 22.0 22.0 22.0 22.0 22.0 22.0 22.0 30.0 30.0 30.0 30.0 30.5 30.5 30.5 30.5 30.5 38.0 38.0 38.0 46.0 46.0 46.0 46.0 2.2 2.5 3.0 3.3 4.0 4.7 5.0 25.0 25.0 25.0 30.0 35.0 35.0 35.0 0.22 0.27 0.33 0.39 0.47 0.56 0.68 0.82 1.0 1.3 1.5 1.8 2.0 dU/dt (V/s) Ipeak (A) 33.5 33.5 33.5 33.5 33.5 44.0 44.0 44.0 44.0 44.0 44.0 44.0 800 800 800 800 800 375 375 375 375 375 375 375 264 312 376 448 544 308 375 450 563 675 750 825 45.0 45.0 45.0 45.0 50.0 50.0 50.0 58.0 58.0 58.0 58.0 58.0 58.0 58.0 225 225 225 225 225 225 225 495 563 675 743 900 1058 1125 22.0 22.0 22.0 22.0 22.0 22.0 22.0 22.0 22.0 30.0 30.0 30.0 30.0 30.5 30.5 30.5 30.5 30.5 38.0 38.0 38.0 38.0 46.0 46.0 46.0 46.0 33.5 33.5 33.5 33.5 33.5 44.0 44.0 44.0 44.0 44.0 44.0 44.0 44.0 800 800 800 800 800 375 375 375 375 375 375 375 375 176 216 264 312 376 210 255 308 375 488 563 675 750 1.5 2.0 2.2 2.5 25.0 30.0 35.0 35.0 45.0 45.0 50.0 50.0 58.0 58.0 58.0 58.0 360 360 360 360 540 720 792 900 0.047 0.068 0.10 0.12 0.15 0.22 0.27 0.33 0.39 0.47 0.56 0.68 0.68 0.82 1.0 1.5 22.0 22.0 22.0 22.0 22.0 22.0 22.0 22.0 22.0 30.0 30.0 30.0 25.0 25.0 30.0 35.0 30.5 30.5 30.5 30.5 30.5 38.0 38.0 38.0 38.0 46.0 46.0 46.0 45.0 45.0 45.0 50.0 33.5 33.5 33.5 33.5 33.5 44.0 44.0 44.0 44.0 44.0 44.0 44.0 58.0 58.0 58.0 58.0 2000 2000 2000 2000 2000 850 850 850 850 850 850 850 525 525 525 525 94 136 200 240 300 187 230 281 332 400 476 578 357 431 525 788 Revision: 08-Jun-16 tan 1 kHz < (10-4) URAC = 550 V; Upp = 1550 V 7.0 16.0 4.0 7.0 14.0 4.0 8.0 11.0 4.0 8.5 10.0 4.0 9.5 8.0 4.0 9.0 13.0 5.0 10.0 10.0 5.0 11.0 9.0 5.0 14.0 7.0 5.0 15.0 6.0 5.0 16.0 5.5 5.0 18.0 4.5 5.0 URAC = 450 V; Upp = 1300 V 14.0 6.0 7.5 15.0 5.0 7.5 16.5 4.0 7.5 18.0 4.0 7.5 21.5 3.0 7.5 23.5 2.5 7.5 24.5 2.5 7.5 URAC = 600 V; Upp = 1690 V 7.0 16.0 3.0 7.0 15.0 3.0 8.0 12.0 3.0 8.5 10.0 3.0 9.0 8.5 3.0 9.0 14.0 4.0 9.0 12.0 4.0 10.0 10.0 4.0 12.0 8.0 4.0 16.0 6.0 4.0 16.0 5.5 4.0 18.0 4.5 4.0 19.0 4.0 4.0 URAC = 450 V; Upp = 1300 V 18.0 3.5 5.0 22.0 2.5 5.0 25.0 2.5 5.0 26.5 2.0 5.0 URAC = 700 V; Upp = 1980 V 6.0 20.0 3.0 6.5 17.0 3.0 8.0 11.0 3.0 9.0 9.0 3.0 9.5 8.0 3.0 10.0 10.0 4.0 11.0 8.5 4.0 12.0 7.0 4.0 12.0 6.0 4.0 16.0 5.0 4.0 18.0 4.0 4.0 20.0 3.5 4.0 14.0 6.0 5.0 15.5 5.0 5.0 18.0 4.0 5.0 24.0 2.5 5.0 IRMS (2) (A) ESR (3) (m) tan 10 kHz < (10-4) tan 100 kHz < (10-4) ORDERING CODE (1) 8.0 8.0 8.0 8.0 8.0 15.0 15.0 15.0 15.0 15.0 15.0 15.0 40 40 40 40 40 60 60 - MKP386M433125J** MKP386M439125J** MKP386M447125J** MKP386M456125J** MKP386M468125J** MKP386M482125J** MKP386M510125J** MKP386M512125J** MKP386M515125J** MKP386M518125J** MKP386M520125J** MKP386M522125J** 20 20 20 20 20 20 20 - MKP386M522125Y** MKP386M525125Y** MKP386M530125Y** MKP386M533125Y** MKP386M540125Y** MKP386M547125Y** MKP386M550125Y** 5.0 5.0 5.0 5.0 5.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 40 40 40 40 40 60 60 60 60 - MKP386M422160J** MKP386M427160J** MKP386M433160J** MKP386M439160J** MKP386M447160J** MKP386M456160J** MKP386M468160J** MKP386M482160J** MKP386M510160J** MKP386M513160J** MKP386M515160J** MKP386M518160J** MKP386M520160K** 15 15 15 15 - MKP386M515160Y** MKP386M520160Y** MKP386M522160Y** MKP386M525160Y** 5.0 5.0 5.0 5.0 5.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 15.0 15.0 15.0 15.0 30 30 30 30 30 50 50 50 50 50 50 50 75 75 - MKP386M347200J** MKP386M368200J** MKP386M410200J** MKP386M412200J** MKP386M415200J** MKP386M422200J** MKP386M427200J** MKP386M433200J** MKP386M439200J** MKP386M447200J** MKP386M456200J** MKP386M468200J** MKP386M468200Y** MKP386M482200Y** MKP386M510200Y** MKP386M515200Y** Document Number: 28170 5 For technical questions, contact: dc-film@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 MKP386M Snubber www.vishay.com Vishay Roederstein ELECTRICAL DATA AND ORDERING CODE URDC (V) 2500 CAP. (F) DIMENSION (mm) (4) W H L 0.047 0.068 0.10 0.12 0.15 0.18 0.22 0.33 0.39 0.47 0.47 0.56 0.68 0.82 22.0 22.0 22.0 22.0 22.0 22.0 22.0 30.0 30.0 30.0 25.0 30.0 35.0 35.0 30.5 30.5 30.5 30.5 38.0 38.0 38.0 46.0 46.0 46.0 45.0 45.0 50.0 50.0 33.5 33.5 33.5 33.5 44.0 44.0 44.0 44.0 44.0 44.0 58.0 58.0 58.0 58.0 dU/dt (V/s) Ipeak (A) 2500 2500 2500 2500 1000 1000 1000 1000 1000 1000 795 795 795 795 118 170 250 300 150 180 220 330 390 470 374 445 541 652 tan 1 kHz < (10-4) URAC = 800 V; Upp = 2260 V 6.0 20.0 3.0 7.0 14.0 3.0 8.5 10.0 3.0 9.5 8.0 3.0 9.5 12.5 4.0 10.0 11.0 4.0 11.0 8.5 4.0 15.0 6.0 4.0 16.0 5.0 4.0 18.0 4.0 4.0 15.0 5.5 5.0 17.0 4.5 5.0 20.5 4.0 5.0 22.5 3.0 5.0 IRMS (2) (A) ESR (3) (m) tan 10 kHz < (10-4) tan 100 kHz < (10-4) ORDERING CODE (1) 5.0 5.0 5.0 5.0 10.0 10.0 10.0 10.0 10.0 10.0 15.0 15.0 15.0 15.0 30 30 30 30 50 50 50 50 50 50 75 75 75 75 MKP386M347250J** MKP386M368250J** MKP386M410250J** MKP386M412250J** MKP386M415250J** MKP386M418250J** MKP386M422250J** MKP386M433250J** MKP386M439250J** MKP386M447250J** MKP386M447250Y** MKP386M456250Y** MKP386M468250Y** MKP386M482250Y** Notes (1) Change the symbol ** according special code for the terminals (see Packaging Information table) (2) Maximum RMS current at 100 kHz, + 85 C (3) The ESR (Equivalent Series Resistance) typical values at 100 kHz (4) Standard dimension PACKAGING INFORMATION URDC (V) 700 850 CAP. (F) ORDERING CODE (1) MASS (g) 0.47 0.68 1.0 1.5 2.0 2.2 3.0 3.3 4.0 4.7 5.0 0.47 0.68 0.82 1.0 1.5 2.0 2.2 3.0 3.3 4.0 4.7 5.0 6.0 7.0 8.0 10 MKP386M447070J** MKP386M468070J** MKP386M510070J** MKP386M515070J** MKP386M520070J** MKP386M522070J** MKP386M530070J** MKP386M533070J** MKP386M540070J** MKP386M547070J** MKP386M550070J** MKP386M447085J** MKP386M468085J** MKP386M482085J** MKP386M510085J** MKP386M515085J** MKP386M520085J** MKP386M522085J** MKP386M530085J** MKP386M533085J** MKP386M540085J** MKP386M547085Y** MKP386M550085Y** MKP386M560085Y** MKP386M570085Y** MKP386M580085Y** MKP386M610085Y** 41 39 38 35 59 57 91 89 86 82 80 40 39 38 36 60 56 55 88 86 86 79 78 93 90 121 114 Revision: 08-Jun-16 TERMINAL AVAILABLE - SPQ (pcs) T1 T2 42 42 63 63 63 63 63 42 42 63 63 63 63 63 42 42 42 63 63 63 50 50 45 45 35 35 42 42 42 63 63 63 50 50 45 45 35 35 T3 48 48 48 48 36 36 54 54 54 54 54 48 48 48 48 36 36 36 54 54 54 48 48 40 40 36 36 T4 42 42 63 63 63 63 63 42 42 42 63 63 63 55 55 45 45 40 40 T5 48 48 48 48 36 36 60 60 60 60 60 48 48 48 48 36 36 36 60 60 60 55 55 45 45 40 40 T6 42 42 63 63 63 63 63 42 42 42 63 63 63 55 55 45 45 40 40 T7 55 55 55 55 36 36 60 60 60 60 60 55 55 55 55 36 36 36 60 60 60 50 50 45 45 35 35 T8 42 42 63 63 63 63 63 42 42 42 63 63 63 50 50 45 45 35 35 Document Number: 28170 6 For technical questions, contact: dc-film@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 MKP386M Snubber www.vishay.com Vishay Roederstein PACKAGING INFORMATION URDC (V) 1000 1250 1600 CAP. (F) ORDERING CODE (1) MASS (g) 0.47 0.56 0.68 0.82 1.0 1.2 1.5 1.8 2.0 2.2 2.5 2.7 3.3 3.3 4.0 4.7 5.0 6.0 7.0 0.33 0.39 0.47 0.56 0.68 0.82 1.0 1.2 1.5 1.8 2.0 2.2 2.2 2.5 3.0 3.3 4.0 4.7 5.0 0.22 0.27 0.33 0.39 0.47 0.56 0.68 0.82 1.0 1.3 1.5 1.8 2.0 1.5 2.0 2.2 2.5 MKP386M447100J** MKP386M456100J** MKP386M468100J** MKP386M482100J** MKP386M510100J** MKP386M512100J** MKP386M515100J** MKP386M518100J** MKP386M520100J** MKP386M522100J** MKP386M525100J** MKP386M527100J** MKP386M533100J** MKP386M533100Y** MKP386M540100Y** MKP386M547100Y** MKP386M550100Y** MKP386M560100Y** MKP386M570100Y** MKP386M433125J** MKP386M439125J** MKP386M447125J** MKP386M456125J** MKP386M468125J** MKP386M482125J** MKP386M510125J** MKP386M512125J** MKP386M515125J** MKP386M518125J** MKP386M520125J** MKP386M522125J** MKP386M522125Y** MKP386M525125Y** MKP386M530125Y** MKP386M533125Y** MKP386M540125Y** MKP386M547125Y** MKP386M550125Y** MKP386M422160J** MKP386M427160J** MKP386M433160J** MKP386M439160J** MKP386M447160J** MKP386M456160J** MKP386M468160J** MKP386M482160J** MKP386M510160J** MKP386M513160J** MKP386M515160J** MKP386M518160J** MKP386M520160K** MKP386M515160Y** MKP386M520160Y** MKP386M522160Y** MKP386M525160Y** 39 39 38 37 35 60 58 56 92 90 88 86 81 78 75 90 89 119 114 40 39 38 37 36 60 59 56 91 88 86 84 81 79 76 93 123 119 116 40 39 38 37 35 61 59 57 54 87 84 79 76 75 87 119 115 Revision: 08-Jun-16 TERMINAL AVAILABLE - SPQ (pcs) T1 T2 42 42 42 63 63 63 63 63 50 50 45 45 35 35 42 42 42 63 63 63 63 63 50 50 45 45 35 35 42 42 42 63 63 63 63 50 50 50 45 35 35 35 42 42 42 63 63 63 63 50 50 50 45 35 35 35 42 42 42 42 63 63 63 63 50 45 35 35 42 42 42 42 63 63 63 63 50 45 35 35 T3 48 48 48 48 48 36 36 36 54 54 54 54 54 48 48 40 40 36 36 48 48 48 48 48 36 36 36 54 54 54 54 48 48 48 40 36 36 36 48 48 48 48 48 36 36 36 36 54 54 54 54 48 40 36 36 T4 42 42 42 63 63 63 63 63 55 55 45 45 40 40 42 42 42 63 63 63 63 55 55 55 45 40 40 40 42 42 42 42 63 63 63 63 55 45 40 40 T5 48 48 48 48 48 36 36 36 60 60 60 60 60 55 55 45 45 40 40 48 48 48 48 48 36 36 36 60 60 60 60 55 55 55 45 40 40 40 48 48 48 48 48 36 36 36 36 60 60 60 60 55 45 40 40 T6 42 42 42 63 63 63 63 63 55 55 45 45 40 40 42 42 42 63 63 63 63 55 55 55 45 40 40 40 42 42 42 42 63 63 63 63 55 45 40 40 T7 55 55 55 55 55 36 36 36 60 60 60 60 60 50 50 45 45 35 35 55 55 55 55 55 36 36 36 60 60 60 60 50 50 50 45 35 35 35 55 55 55 55 55 36 36 36 36 60 60 60 60 50 45 35 35 T8 42 42 42 63 63 63 63 63 50 50 45 45 35 35 42 42 42 63 63 63 63 50 50 50 45 35 35 35 42 42 42 42 63 63 63 63 50 45 35 35 Document Number: 28170 7 For technical questions, contact: dc-film@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 MKP386M Snubber www.vishay.com Vishay Roederstein PACKAGING INFORMATION URDC (V) 2000 2500 CAP. (F) ORDERING CODE (1) MASS (g) 0.047 0.068 0.10 0.12 0.15 0.22 0.27 0.33 0.39 0.47 0.56 0.68 0.68 0.82 1.0 1.5 0.047 0.068 0.10 0.12 0.15 0.18 0.22 0.33 0.39 0.47 0.47 0.56 0.68 0.82 MKP386M347200J** MKP386M368200J** MKP386M410200J** MKP386M412200J** MKP386M415200J** MKP386M422200J** MKP386M427200J** MKP386M433200J** MKP386M439200J** MKP386M447200J** MKP386M456200J** MKP386M468200J** MKP386M468200Y** MKP386M482200Y** MKP386M510200Y** MKP386M515200Y** MKP386M347250J** MKP386M368250J** MKP386M410250J** MKP386M412250J** MKP386M415250J** MKP386M418250J** MKP386M422250J** MKP386M433250J** MKP386M439250J** MKP386M447250J** MKP386M447250Y** MKP386M456250Y** MKP386M468250Y** MKP386M482250Y** 41 40 39 38 37 61 59 57 55 90 87 82 78 75 89 112 40 39 37 36 61 59 57 88 85 80 74 89 119 113 TERMINAL AVAILABLE - SPQ (pcs) T1 T2 42 42 42 42 63 63 63 50 50 45 35 42 42 42 42 63 63 63 50 50 45 35 42 42 42 63 63 63 50 45 35 35 42 42 42 63 63 63 50 45 35 35 T3 48 48 48 48 48 36 36 36 36 54 54 54 48 48 40 36 48 48 48 48 36 36 36 54 54 54 48 40 36 36 T4 42 42 42 42 63 63 63 55 55 45 40 42 42 42 63 63 63 55 45 40 40 T5 48 48 48 48 48 36 36 36 36 60 60 60 55 55 45 40 48 48 48 48 36 36 36 60 60 60 55 45 40 40 T6 42 42 42 42 63 63 63 55 55 45 40 42 42 42 63 63 63 55 45 40 40 T7 55 55 55 55 55 36 36 36 36 60 60 60 50 50 45 35 55 55 55 55 36 36 36 60 60 60 50 45 35 35 T8 42 42 42 42 63 63 63 50 50 45 35 42 42 42 63 63 63 50 45 35 35 Note (1) Change the ** symbol according special code for the terminals CONSTRUCTION Low inductive wound cells elements of metallized polypropylene film, potted with resin in flame retardant case. Series construction for 420 VAC to 600 VAC versions build in case width 44 mm and 450 VAC to 550 VAC versions build in case width > 44 mm. Triple construction for 700 VAC and 800 VAC versions build in case width 44 mm and 550 VAC to 700 VAC versions build in case width > 44 mm. MKP metallized polypropylene MKP metallized polypropylene Metal spray layer Metal spray layer Revision: 08-Jun-16 Series construction with 4 sections for 800 VAC versions build in case width > 44 mm. Document Number: 28170 8 For technical questions, contact: dc-film@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 MKP386M Snubber www.vishay.com Vishay Roederstein MOUNTING SOLDERING CONDITIONS Normal Use Storage Temperature The capacitors are designed for mounting on printed-circuit boards or IGBT or GTO modules. Tstg = - 25 C to + 35 C with RH maximum 75 % without condensation. Specific Method of Mounting to Withstand Vibration and Shock Ratings and Characteristics Reference Conditions In order to withstand vibration and shock tests, the capacitors shall be mechanically fixed by tabs it must be ensured that the tabs are screwed tightly on the test board. When the weight of the capacitor is bigger than 50 g it needs a clamp in the body of the capacitor. Unless otherwise specified, all electrical values apply to an ambient temperature of 23 C 1 C, an atmospheric pressure of 86 kPa to 106 kPa and a relative humidity of 50 % 2 %. For reference testing, a conditioning period shall be applied over 96 h 4 h by heating the products in a circulating air oven at the rated temperature and a relative humidity not exceeding 20 %. 4 Z () C/C (%) CHARACTERISTICS 3 100 Box length 33.5 mm Box length 44.0 mm Box length 57.5 mm 2 10 1 0 -1 1 1 F -2 -3 4 F 0.1 -4 10 F -5 -6 - 60 - 40 - 20 0 20 40 60 0.01 10 000 100 80 Tamb (C) Capacitance as a function of ambient temperature (typical curve) Z () Z () 1 000 000 10 000 000 f (Hz) Impedance as a function of frequency (typical curve) factor 10.00 100 000 1.2 1.0 1.00 0.8 0.10 0.6 0.4 0.01 5 F 0.00 10 000 100 000 0.2 2 F 1 000 000 f (Hz) 10 000 000 Impedance as function of frequency for box length 44.0 mm (typical curve) Revision: 08-Jun-16 0 - 60 - 20 20 60 100 Tamb (C) Max. DC and AC voltage as a function of temperature Document Number: 28170 9 For technical questions, contact: dc-film@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 MKP386M Snubber www.vishay.com Vishay Roederstein 108 T (C) RC (s) CHARACTERISTICS 16 14 12 10 8 106 6 4 2 104 0 20 0 40 60 80 - 60 100 - 40 - 20 0 20 40 60 80 100 Tamb (C) Tamb (C) Insulation resistance as a function of ambient temperature (typical curve) Maximum allowed component temperature rise (T) as function of the ambient temperature (Tamb) 1000 Capacitance in F 0.47 1.0 2.2 4.7 100 AC Voltage (V) AC Voltage (V) MAXIMUM RMS VOLTAGE (SINEWAVE) AS A FUNCTION OF FREQUENCY 1000 85 C < Tamb 105 C, 700 VDC 0.47 1.0 2.2 4.7 100 Tamb 85 C, 700 VDC Capacitance in F 10 10 100 1000 10 000 100 000 1 000 000 100 1000 10 000 100 000 1000 Capacitance in F 0.47 1.0 2.2 4.0 5.0 10 100 1 000 000 f (Hz) AC Voltage (V) AC Voltage (V) f (Hz) 1000 85 C < Tamb 105 C, 850 VDC 0.47 1.0 2.2 4.0 5.0 10 100 Tamb 85 C, 850 VDC Capacitance in F 10 10 100 1000 10 000 100 000 1 000 000 f (Hz) Revision: 08-Jun-16 100 1000 10 000 100 000 1 000 000 f (Hz) Document Number: 28170 10 For technical questions, contact: dc-film@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 MKP386M Snubber www.vishay.com Vishay Roederstein 1000 Capacitance in F 0.47 1.0 1.5 3.3 4.7 7.0 100 AC Voltage (V) AC Voltage (V) MAXIMUM RMS VOLTAGE (SINEWAVE) AS A FUNCTION OF FREQUENCY 1000 85 C < Tamb 105 C, 1000 VDC 0.47 1.0 1.5 3.3 4.7 7.0 100 Tamb 85 C, 1000 VDC Capacitance in F 10 10 100 1000 10 000 100 000 1 000 000 100 1000 10 000 100 000 1000 Capacitance in F 0.39 0.68 1.5 2.2 3.0 4.7 100 1000 85 C < Tamb 105 C, 1250 VDC 0.39 0.68 1.5 2.2 3.0 4.7 100 Tamb 85 C, 1250 VDC Capacitance in F 10 10 100 1000 10 000 100 000 1 000 000 100 1000 10 000 100 000 1000 Capacitance in F 0.22 0.47 1.0 1.5 2.0 2.5 100 1 000 000 f (Hz) AC Voltage (V) f (Hz) AC Voltage (V) 1 000 000 f (Hz) AC Voltage (V) AC Voltage (V) f (Hz) 1000 85 C < Tamb 105 C, 2000 VDC 0.047 0.10 0.22 0.47 0.68 1.5 100 Tamb 85 C, 1600 VDC Capacitance in F 10 10 100 1000 10 000 100 000 1 000 000 f (Hz) Revision: 08-Jun-16 100 1000 10 000 100 000 1 000 000 f (Hz) Document Number: 28170 11 For technical questions, contact: dc-film@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 MKP386M Snubber www.vishay.com Vishay Roederstein 1000 AC Voltage (V) AC Voltage (V) MAXIMUM RMS VOLTAGE (SINEWAVE) AS A FUNCTION OF FREQUENCY Capacitance in F 0.047 0.10 0.22 0.47 0.68 1.5 100 1000 85 C < Tamb 105 C, 2000 VDC 0.047 0.10 0.22 0.47 0.68 1.5 100 Tamb 85 C, 2000 VDC Capacitance in F 10 10 100 1000 10 000 100 000 1 000 000 100 1000 10 000 100 000 1000 Capacitance in F 0.047 0.10 0.15 0.33 0.47 0.82 100 1 000 000 f (Hz) AC Voltage (V) AC Voltage (V) f (Hz) 1000 85 C < Tamb 105 C, 2500 VDC 0.047 0.10 0.15 0.33 0.47 0.82 100 Tamb 85 C, 2500 VDC Capacitance in F 10 10 100 1000 10 000 100 000 1 000 000 100 1000 IRMS operational/IRMS max. f (Hz) 10 000 100 000 1 000 000 f (Hz) 1.6 1.4 1.2 1.0 0.8 0.6 0.4 0.2 0 50 60 70 80 90 100 110 Maximum Ambient Temperature (C) Maximum IRMS current in function of the ambient temperature Revision: 08-Jun-16 Document Number: 28170 12 For technical questions, contact: dc-film@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 MKP386M Snubber www.vishay.com Vishay Roederstein MARKING Printing Example: Product Marking and Identification The capacitor is marked by laser print or stamp, with following information: 1. Manufacturer's logo VISHAY 5F J 386M F0825 2. Code for dielectric material (MKP) 3. Manufacturer's type designation (386) 4. Single metallized (M) 5. Rated capacitance value (5 F) 6. Tolerance on rated capacitance (J = 5 %) 700V MKP 7. Rated DC voltage (700 V) 8. Code for factory of origin (F) 9. Year and week of manufacture (e.g. 0825) Packing Bar Code Label Label Example: 1. 2. 3. 4. 5. Manufacturer's logo Country of origin Sub family Type description Capacitance value, tolerance, voltage and climatic category according to IEC 60068-1 6. Production center 7. Preference origin code: A Country of origin in code 8. Product type description 9. Batch number 10. Quantity and production date, year week code 11. Product code HEAT CONDUCTIVITY (G) AS A FUNCTION OF ORIGINAL PITCH AND CAPACITOR BODY THICKNESS IN mW/C Wmax. (mm) HEAT CONDUCTIVITY (mW/C) BOX LENGTH 33.5 mm BOX LENGTH 44.0 mm 22 75 100 BOX LENGTH 58.0 mm - 25 - - 155 30 - 140 170 35 - - 200 POWER DISSIPATION AND MAXIMUM COMPONENT TEMPERATURE RISE The power dissipation must be limited in order not to exceed the maximum allowed component temperature rise as a function of the free air ambient temperature. The power dissipation can be calculated according type detail specification "HQN-384-01/101: Technical Information Film Capacitors" with the typical tgd of the curves. The component temperature rise (T) can be measured (see section "Measuring the Component Temperature" for more details) or calculated by T = P/G: * T = Component temperature rise (C) with maximum of 10 C rise (C) * P = Power dissipation of the component (mW) * G = Heat conductivity of the component (mW/C) Revision: 08-Jun-16 Document Number: 28170 13 For technical questions, contact: dc-film@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 MKP386M Snubber www.vishay.com Vishay Roederstein MEASURING THE COMPONENT TEMPERATURE A thermocouple must be attached to the capacitor body as in: Thermocouple Thermocouple The temperature is measured in unloaded (Tamb) and maximum loaded condition (TC). The temperature rise is given by T = TC - Tamb. To avoid radiation or convection, the capacitor should be tested in a wind-free box. APPLICATION NOTE AND LIMITING CONDITIONS These capacitors are not suitable for mains applications as across-the-line capacitors without additional protection, as described hereunder. These mains applications are strictly regulated in safety standards and therefore electromagnetic interference suppression capacitors conforming the standards must be used. To select the capacitor for a certain application, the following conditions must be checked: 1. The peak voltage (UP) shall not be greater than the rated DC voltage (URDC) 2. The peak-to-peak voltage (Upp) shall not be greater than the maximum (Upp) to avoid the ionization inception level 3. The voltage peak slope (dU/dt) shall not exceed the rated voltage pulse slope in an RC-circuit at rated voltage and without ringing. If the pulse voltage is lower than the rated DC voltage, the rated voltage pulse slope may be multiplied by URDC and divided by the applied voltage. For all other pulses following equation must be fulfilled: T 2 dU dU 2 -------- x dt U RDC x -------- dt dt rated 0 T is the pulse duration. 4. The maximum component surface temperature rise must be lower than the limits (see figure Max. Allowed Component Temperature Rise) 5. Since in circuits used at voltages over 280 V peak-to-peak the risk for an intrinsically active flammability after a capacitor breakdown (short circuit) increases, it is recommended that the power to the component is limited to 100 times the values mentioned in the table "Heat conductivity" 6. When using these capacitors as across-the-line capacitor in the input filter for mains applications or as series connected with an impedance to the mains the applicant must guarantee that the following conditions are fulfilled in any case (spikes and surge voltages from the mains included) VOLTAGE CONDITIONS FOR 6 ABOVE Tamb 85 C 85 C Tamb 105 C URAC 0.7 x URAC Maximum temporary RMS overvoltage (< 24 h) 1.25 x URAC 0.875 x URAC Maximum peak voltage (Vo-p) (< 2 s) 1.6 x URDC 1.1 x URDC ALLOWED VOLTAGES Maximum continuous RMS voltage Revision: 08-Jun-16 Document Number: 28170 14 For technical questions, contact: dc-film@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 MKP386M Snubber www.vishay.com Vishay Roederstein INSPECTION REQUIREMENTS General Notes Sub-clause numbers of tests and performance requirements refer to the "Sectional Specification, Publication IEC 60384-17". GROUP C INSPECTION REQUIREMENTS SUB-CLAUSE NUMBER AND TEST CONDITIONS PERFORMANCE REQUIREMENTS SUB-GROUP C1A PART OF SAMPLE OF SUB-GROUP C1 4.1 Dimensions (details) As specified in chapters "General Data" of this specification 4.3.1 Initial measurements Capacitance Tangent of loss angle: For C > 1 F at 1 kHz For C 1 F at 10 kHz 4.3 Robustness of terminations Tensile: Load 30 N; 10 s 4.4 Resistance to soldering heat No pre-drying Method: 1A Solder bath: 265 C Duration: 10 s 4.4.2 Final measurements No visible damage Visual examination No visible damage Legible marking Capacitance |C/C| 2 % of the value measured initially Tangent of loss angle Increase of tan : 0.002 Compared to values measured initially Insulation resistance 50 % values specified in section "Insulation Resistance" of this specification SUB-GROUP C1B PART OF SAMPLE OF SUB-GROUP C1 4.6.1 Initial measurements Capacitance Tangent of loss angle: For C > 1 F at 1 kHz For C 1 F at 10 kHz 4.6 Rapid change of temperature A = - 55 C B = + 105 C 5 cycles Duration t = 30 min Visual examination No visible damage 4.7 Vibration Mounting: See section "Mounting" of this specification Procedure B4: Frequency range: 10 Hz to 55 Hz Amplitude: 0.75 mm or Acceleration 98 m/s2 (whichever is less severe) Total duration 6 h 4.7.2 Final inspection Visual examination No visible damage 4.9 Mounting: See section "Mounting" for more information Pulse shape: Half sine Acceleration: 490 m/s2 Duration of pulse: 11 ms Visual examination No visible damage Shock Revision: 08-Jun-16 Document Number: 28170 15 For technical questions, contact: dc-film@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 MKP386M Snubber www.vishay.com Vishay Roederstein GROUP C INSPECTION REQUIREMENTS SUB-CLAUSE NUMBER AND TEST CONDITIONS PERFORMANCE REQUIREMENTS SUB-GROUP C1B PART OF SAMPLE OF SUB-GROUP C1 4.9.3 4.15 Final measurements Solvent resistance of the marking Capacitance |C/C| 2 % of the value measured initially Tangent of loss angle Increase of tan 0.002 Compared to values measured initially Insulation resistance 50 % values specified in section "Insulation Resistance" of this specification Isopropyl alcohol at room temperature Method: 1 Rubbing material: Cotton wool Immersion time: 5 min 0.5 min No visible damage Legible marking SUB-GROUP C1 COMBINED SAMPLE OF SPECIMENS OF SUB-GROUPS C1A AND C1B 4.10 Climatic sequence 4.10.2 Dry heat 4.10.3 Damp heat cyclic Test Db, first cycle 4.10.4 Cold 4.10.6 Damp heat cyclic Test Db remaining cycles 4.10.6.2 Final measurements Temperature: + 105 C Duration: 16 h Temperature: - 55 C Duration: 2 h Voltage proof = URDC for 1 min within 15 min after removal from test chamber No breakdown or flash-over Visual examination No visible damage Legible marking Capacitance |C/C| 3 % of the value measured initially Tangent of loss angle Increase of tan 0.002 Compared to values measured in 4.3.1 or 4.6.1 as applicable Insulation resistance 50 % of values specified in section "Insulation Resistance" of this specification SUB-GROUP C2 4.11 Damp heat steady state 4.11.1 Initial measurements Capacitance Tangent of loss angle at 1 kHz 4.11.3 Final measurements Visual examination Voltage proof = URDC for 1 min within 15 min after removal from test chamber No visible damage Legible marking No breakdown or flash-over Capacitance |C/C| 3 % of the value measured in 4.11.1. Tangent of loss angle Increase of tan 0.002 Compared to values measured in 4.11.1 Insulation resistance 50 % of values specified in section "Insulation Resistance" of this specification Revision: 08-Jun-16 Document Number: 28170 16 For technical questions, contact: dc-film@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 MKP386M Snubber www.vishay.com Vishay Roederstein GROUP C INSPECTION REQUIREMENTS SUB-CLAUSE NUMBER AND TEST SUB-GROUP C3A 4.12.1 Endurance test at 50 Hz alternative voltage CONDITIONS PERFORMANCE REQUIREMENTS Duration: 2000 h 1.25 x URAC at 85 C 0.875 x URAC at 105 C 4.12.1.1 Initial measurements Capacitance Tangent of loss angle at: For C > 1 F at 1 kHz For C 1 F at 10 kHz 4.12.1.3 Final measurements Visual examination No visible damage Legible marking Capacitance |C/C| 5 % compared to values measured in 4.12.1.1 Tangent of loss angle Increase of tan : 0.0015 for C 1 F 0.0015 for C > 1 F Compared to values measured in 4.12.1.1 Insulation resistance 50 % of values specified in section "Insulation Resistance" of this specification Capacitance Capacitance at - 55 C Capacitance at 20 C Capacitance at + 105 C For - 55 C to 20 C 0 % |C/C| 2.75 % or For 20 C to 105 C - 5.5 % |C/C| 0 % As specified in section "Capacitance" of this specification SUB-GROUP C4 4.2.6 Temperature characteristics Initial measurements Intermediate measurements 4.13 Charge and discharge 10 000 cycles (1...50 c/s) 2.5 x (dU/dt)R charge to URDC with maximum pulse slope 0.01 (dU/dt)R Duration: 5 ms Discharge resistance: Un V DC R = ---------------------------------------- 2.5 x C (dU/dt) 4.13.1 Initial measurements Capacitance Tangent of loss angle at: For C > 1 F at 1 kHz For C 1 F at 10 kHz 4.13.3 Final measurements Capacitance |C/C| 5 % compared to values measured in 4.13.1. Tangent of loss angle Increase of tan : 0.0015 for C 1 F 0.0015 for C > 1 F Compared to values measured in 4.13.1 Insulation resistance 50 % of values specified in section "Insulation Resistance" of this specification Revision: 08-Jun-16 Document Number: 28170 17 For technical questions, contact: dc-film@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, "Vishay"), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer's technical experts. Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. (c) 2017 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED Revision: 08-Feb-17 1 Document Number: 91000