361545_pp99_106.qxp:1 12/13/07 8:20 AM Page 102 Power Dividers Two Way Broadband Power Division * * * * Broadband Resistive Type DC-12.4 and DC-18.0 GHz bandwidth units Symmetrical Loss and Phase Balance Rugged Construction Meets Mil-E-5400 and Mil-E16400 Environment Midwest Microwave's series of Resistive Two Way Power Dividers are very broadband devices that are small, lightweight, ruggedly constructed units that possess consistent VSWR and insertion loss. They also exhibit excellent phase and amplitude tracking. Units are available in wideband frequency bandwidths covering the range of DC-12.4 GHz and DC-18.0 GHz. The units meet the environmental specifications of MIL-E-5400 and MIL-E-16400. Model Number: DC-12.4 GHz PWD-2532-02-SMA-79 SPECIFICATIONS Frequency: DC-12.4 GHz and DC - 18.0 GHz Impedance: 50 Ohms VSWR: 1.25 @ DC-10 GHz and 1.35 @ 10.0-18.0 GHz Amplitude Balance: 0.2 dB @ DC-4.0 GHz DC-18.0 GHz PWD-2533-02-SMA-79 0.4 dB @ 4.0-10.0 GHz 0.5 dB @ 10.0-18.0 GHz Phase Balance: 10 degrees max Insertion Loss: 6 dB nom +1.2/-0.2 dB @ DC-10 GHz 6 dB nom +1.5/-0.2 dB @ 10-18 GHz Power (In): 1 Watt avg Operating Temperature: -55 oC - +125 oC Connectors: Passivated Stainless Steel SMA* R.F. Signal Monitor * * * * Bite System Application Small Size, Light Weight Rugged Construction Meets Mil-E-5400 and Mil-E16400 Environment Midwest Microwave offers a wide variety of Signal Monitor components. The unit described here is a passive device that monitors the signal that is flowing in a transmission line. It is a linear device that extracts a very small portion of the energy in the primary line in order to monitor the presence of a signal on that line. The units meet the environmental specifications of MIL-E-5400 and MIL-E-16400. Model Number: SPECIFICATIONS Frequency: DC-2.5 GHz Impedance: 50 Ohms VSWR: 1.20:1 max Main RF Path Attenuation: 0.5 0.15 dB Sampled Port Coupling: 26 1.2 dB Power (In): 1 Watt avg Operating Temperature: -55 oC - +125 oC Connectors: Passivated Stainless Steel SMA* Note 102 RFM-7020-26-SMA-79 1. TNC, BNC, or Type N output connectors are available by substituting "TNC", "BNC", or "NNN" for "SMA" in the Model Number. 2. Overall dimensions will increase because of larger connectors.