SPECIFICATION * Supplier : Samsung electro-mechanics * Product : Multi-layer Ceramic Capacitor (Reference sheet) CL43C122JIINNNF * Samsung P/N : * Description : CAP, 1.2, 1000V, 5%, C0G, 1812 A. Samsung Part Number CL 43 C 122 J I I N N N F Samsung Multi-layer Ceramic Capacitor 1812 (inch code) L: 4.50 0.40 mm Series Size Dielectric Capacitance Capacitance tolerance Rated Voltage Thickness C0G 1.2 5% W: 3.20 0.30 mm Inner electrode Termination Plating Product Special Packaging 1000 V 2.00 0.20 mm Ni Cu Sn 100% (Pb Free) Normal Reserved for future use Embossed Type, 13" reel B. Structure and dimension Dimension() Samsung P/N CL43C122JIINNNF L W T BW 4.50 0.40 3.20 0.30 2.00 0.20 0.80 0.30 C. Samsung Reliability Test and Judgement condition Performance Capacitance Q Insulation Resistance Appearance Withstanding Voltage Temperature Characteristics Adhesive Strength of Termination Bending Strength Solderability Within specified tolerance 1,000 min 10,000Mohm or 500Mohmx Whichever is smaller No abnormal exterior appearance No dielectric breakdown or mechanical breakdown C0G Test condition 110% / 0.5~5Vrms 500 50 Vdc 605 sec. Microscop (X10) 120% of the rated voltage (From -55 to 125, Capacitance change should be within 30PPM/) No peeling shall be occur on the 500gxF, for 101 sec. terminal electrode Capacitance change : Bending to the limit (1mm) with 1.0mm/sec. within 5% or 0.5 whichever is larger More than 75% of terminal surface SnAg3.0Cu0.5 solder is to be soldered newly 2455, 30.3sec. (preheating : 80~120 for 10~30sec.) Resistance to Soldering heat Vibration Test High Temperature Resistance Temperature Cycling Capacitance change : Solder pot : 2705, 101sec. within 2.5% or 0.25 whichever is larger Tan , IR : initial spec. Capacitance change : Amplitude : 1.5mm within 2.5% or 0.25 whichever is larger Tan , IR : initial spec. Capacitance change : within 3% or 0.3 whichever is larger Q: 350 min IR : 1,000Mohm or 50Mohm x Whichever is smaller Capacitance change : within 2.5% or 0.25 whichever is larger Tan , IR : initial spec. From 10 to 55 (return : 1min.) 2hours 3 direction (x, y, z) With 100% of the rated voltage Max. operating temperature 1000+48/-0hrs 1 cycle condition Min. operating temperature Max. operating temperature 5 cycle test The reliability test condition can be replaced by the corresponding accelerated test condition. D. Recommended Soldering method : Reflow ( Reflow Peak Temperature : 260+0/-5, 10sec. Max ) Product specifications included in the specifications are effective as of March 1, 2013. Please be advised that they are standard product specifications for reference only. We may change, modify or discontinue the product specifications without notice at any time. So, you need to approve the product specifications before placing an order. Should you have any question regarding the product specifications, please contact our sales personnel or application engineers. 25 25 - Disclaimer & Limitation of Use and Application - Disclaimer & Limitation of Use and Application The products listed in this Specification sheet are NOT designed and manufactured for any use The products listed inset thisforth Specification and applications below. sheet are NOT designed and manufactured for any use and applications set forth below. Please note thatthat any misuse of the of products deviatingdeviating from products or informationor information Please note any misuse the products fromspecifications products specifications provided in this Spec sheet may cause serious property damages or personal injury. provided in this Spec sheet may cause serious property damages or personal injury. We will NOT be liable for any damages resulting from any misuse of the products, specifically We will NOT be liable for any damages resulting from any misuse of the products, specifically including using the products for high reliability applications as listed below. including using the products for high reliability applications as listed below. If you have any questions regarding this 'Limitation of Use and Application', you should first contact our sales personnel or application engineers. If you have any questions regarding this 'Limitation of Use and Application', you should first contact our sales personnel or application engineers. Aerospace/Aviation equipment Aerospace/Aviation equipment Automotive or Transportation equipment (vehicles, trains, ships, etc) Automotive or Transportation equipment (vehicles, trains, ships, etc) Medical equipment Military equipment Medical equipment Disaster prevention/crime prevention equipment Military equipment Power plant control equipment Disaster prevention/crime prevention equipment Atomic energy-related equipment Undersea equipment Any other applications with the same as or similar complexity or reliability to the applications Traffic signal equipment set forth above. Data-processing equipment Electric heating apparatus, burning equipment Safety equipment Any other applications with the same as or similar complexity or reliability to the applications