1 of 19
FEATURES
Real-Time Clock (RTC) Keeps Track of
Hundredths of Seconds, Minutes, Hours,
Days, Date of the Month, Months, and Years
128K x 8 NV SRAM Directly Replaces
Volatile Static RAM or EEPROM
Embedded Lithium Energy Cell Maintains
Calendar Operation and Retains RAM Data
Watch Function is Transparent to RAM
Operation
Automatic Leap Year Compensation Valid
Up to 2100
Full 10% Operating Range
Over 10 Years of Data Retention in the
Absence of Power
Lithium Energy Source is Electrically
Disconnected to Retain Freshness Until
Power is Applied for the First Time
DIP Module Only
Standard 32-Pin JEDEC Pinout
Underwriters Laboratories (UL) Recognized
(www.maxim-ic.com/qa/info/ul/)
PowerCap Module Board Only
Surface Mountable Package for Direct
Connection to PowerCap Containing
Battery and Crystal
Replaceable Battery (PowerCap)
Pin-for-Pin Compatible with DS1244P and
DS1251P
PIN CONFIGURATIONS
Encapsulated DIP
(740-mil Flush)
RST
N.C.
13
1
2
3
4
5
6
7
8
9
10
11
12
14
A14
A7
A5
A4
A3
A2
A1
A0
DQ1
DQ0
A16
A12
A6
DQ2
GND
15
16
VCC
A15
WE
A13
A8
A9
A11
OE
A10
CE
DQ7
DQ5
DQ6
DQ4
DQ3
DS1248
TOP VIEW
1
RST
2
3
CC
WE
4
5
6
7
8
9
10
11
12
13
14
15
16
17
N.C.
A14
33
32
31
30
29
28
27
26
25
24
23
22
21
20
19
18
A13
A12
A11
A10
A9
A8
A7
A6
A5
A4
A3
A2
A1
A0
34
N.C.
X1
GND
V
BAT
X2
PowerCap Module Board
(Uses DS9034PCX+ PowerCap)
DS1248P
DS1248/DS1248P
1024K NV SRAM with Phantom Clock
19-6078; Rev 11/11
DS1248/DS1248P 1024K NV SRAM with Phantom Clock
2 of 19
ORDERING INFORMATION
PART TEMP RANGE VCC RANGE PIN-PACKAGE
DS1248Y-70+
0°C to +70°C
5V ±10%
32 EDIP
DS1248Y-70IND+
-40°C to +85°C
5V ±10%
32 EDIP
DS1248YP-70+
0°C to +70°C
5V ±10%
34 PowerCap*
DS1248W-120+
0°C to +70°C
3.3V ±10%
32 EDIP
DS1248W-120IND+
-40°C to +85°C
3.3V ±10%
32 EDIP
DS1248WP-120+
0°C to +70°C
3.3V ±10%
34 PowerCap*
DS1248WP-120IND+
-40°C to +85°C
3.3V ±10%
34 PowerCap*
+ Denotes a lead(Pb)-free/RoHS-compliant package.
* DS9034PCX+ or DS9034I-PCX+ (PowerCap) required. Must be ordered separately.
DETAILED DESCRIPTION
The DS1248 1024K NV SRAM with phantom clock is a fully static, nonvolatile RAM (organized as
128K words by 8 bits) with a built-in real-time clock. The DS1248 has a self-contained lithium energy
source and control circuitry, which constantly monitors VCC for an out-of-tolerance condition. When such
a condition occurs, the lithium energy source is automatically switched on and writes protection is
unconditionally enabled to prevent garbled data in both the memory and real-time clock.
PACKAGES
The DS1248 is available in two packages: 32-pin DIP and 34-pin PowerCap module. The 32-pin DIP
style module integrates the crystal, lithium energy source, and silicon in one package. The 34-pin
PowerCap module board is designed with contacts for connection to a separate PowerCap (DS9034PCX)
that contains the crystal and battery. This design allows the PowerCap to be mounted on top of the
DS1248P after completion of the surface mount process. Mounting the PowerCap after the surface mount
process prevents damage to the crystal and battery because of the high temperatures required for solder
reflow. The PowerCap is keyed to prevent reverse insertion. The PowerCap module board and PowerCap
are ordered separately and shipped in separate containers.
DS1248/DS1248P 1024K NV SRAM with Phantom Clock
3 of 19
PIN DESCRIPTION
PIN
NAME FUNCTION
EDIP
PowerCap
1 1 RST
Active-Low Reset Input. This pin has an internal pullup resistor
connected to VCC.
2
3
A16
Address Inputs
3
32
A14
4
30
A12
5
25
A7
6
24
A6
7
23
A5
8
22
A4
9
21
A3
10
20
A2
11
19
A1
12
18
A0
23
28
A10
25
29
A11
26
27
A9
27
26
A8
28
31
A13
31
2
A15
13
16
DQ0
Data In/Data Out
14
15
DQ1
15
14
DQ2
17
13
DQ3
18
12
DQ4
19
11
DQ5
20
10
DQ6
21
9
DQ7
22
8
CE
Active-Low Chip-Enable Input
24
7
OE
Active-Low Output-Enable Input
29
6
WE
Active-Low Write-Enable Input
30
4, 33, 34
N.C.
No Connect
32
5
VCC
Power-Supply Input
16
17
GND
Ground
DS1248/DS1248P 1024K NV SRAM with Phantom Clock
4 of 19
RAM READ MODE
The DS1248 executes a read cycle whenever WE (write enable) is inactive (high) and CE (chip enable) is
active (low). The unique address specified by the 17 address inputs (A0–A16) defines which of the 128k
bytes of data is to be accessed. Valid data will be available to the eight data-output drivers within tACC
(access time) after the last address input signal is stable, providing that CE and OE (output enable) access
times and states are also satisfied. If OE and CE access times are not satisfied, then data access must be
measured from the later occurring signal (CE or OE) and the limiting parameter is either tCO for CE or tOE
for OE, rather than address access.
RAM WRITE MODE
The DS1248 is in the write mode whenever the WE and CE signals are in the active (low) state after
address inputs are stable. The latter occurring falling edge of CE or WE will determine the start of the
write cycle. The write cycle is terminated by the earlier rising edge of CEor WE. All address inputs must
be kept valid throughout the write cycle. WE must return to the high state for a minimum recovery time
(tWR) before another cycle can be initiated. The OE control signal should be kept inactive (high) during
write cycles to avoid bus contention. However, if the output bus has been enabled (CE and OE active)
then WE will disable the outputs in tODW from its falling edge.
DATA RETENTION MODE
The 5V device is fully accessible and data can be written or read only when VCC is greater than VPF.
However, when VCC is below the power-fail point, VPF (point at which write protection occurs), the
internal clock registers and SRAM are blocked from any access. When VCC falls below the battery switch
point, VSO (battery supply level), device power is switched from the VCC pin to the backup battery. RTC
operation and SRAM data are maintained from the battery until VCC is returned to nominal levels.
The 3.3V device is fully accessible and data can be written or read only when VCC is greater than VPF.
When VCC falls below VPF, access to the device is inhibited. If VPF is less than VBAT, the device power is
switched from VCC to the backup supply (VBAT) when VCC drops below VPF. If VPF is greater than VBAT,
the device power is switched from VCC to the backup supply (VBAT) when VCC drops below VBAT. RTC
operation and SRAM data are maintained from the battery until VCC is returned to nominal levels.
All control, data, and address signals must be powered down when VCC is powered-down.
DS1248/DS1248P 1024K NV SRAM with Phantom Clock
5 of 19
PHANTOM CLOCK OPERATION
Communication with the phantom clock is established by pattern recognition on a serial bit stream of
64 bits, which must be matched by executing 64 consecutive write cycles containing the proper data on
DQ0. All accesses that occur prior to recognition of the 64-bit pattern are directed to memory.
After recognition is established, the next 64 read or write cycles either extract or update data in the
phantom clock, and memory access is inhibited.
Data transfer to and from the timekeeping function is accomplished with a serial bit stream under control
of chip enable, output enable, and write enable. Initially, a read cycle to any memory location using the
CE and OE control of the phantom clock starts the pattern recognition sequence by moving a pointer to
the first bit of the 64-bit comparison register. Next, 64 consecutive write cycles are executed using the CE
and WE control of the SmartWatch. These 64 write cycles are used only to gain access to the phantom
clock. Therefore, any address to the memory in the socket is acceptable. However, the write cycles
generated to gain access to the phantom clock are also writing data to a location in the mated RAM. The
preferred way to manage this requirement is to set aside just
one address location in RAM as a phantom clock scratch pad. When the first write cycle is executed, it is
compared to bit 0 of the 64-bit comparison register. If a match is found, the pointer increments to the next
location of the comparison register and awaits the next write cycle. If a match is not found, the pointer
does not advance and all subsequent write cycles are ignored. If a read cycle occurs at any time during
pattern recognition, the present sequence is aborted and the comparison register pointer is reset. Pattern
recognition continues for a total of 64 write cycles as described above until all the bits in the comparison
register have been matched (Figure 1). With a correct match for 64 bits, the phantom clock is enabled and
data transfer to or from the timekeeping registers can proceed. The next 64 cycles will cause the phantom
clock to either receive or transmit data on DQ0, depending on the level of the OE pin or the WE pin.
Cycles to other locations outside the memory block can be interleaved with CE cycles without
interrupting the pattern recognition sequence or data transfer sequence to the phantom clock.
PHANTOM CLOCK REGISTER INFORMATION
The phantom clock information is contained in eight registers of 8 bits, each of which is sequentially
accessed 1 bit at a time after the 64-bit pattern recognition sequence has been completed. When updating
the phantom clock registers, each register must be handled in groups of 8 bits. Writing and reading
individual bits within a register could produce erroneous results. These read/write registers are defined in
Figure 2.
Data contained in the phantom clock register is in binary-coded decimal format (BCD). Reading and
writing the registers is always accomplished by stepping through all eight registers, starting with bit 0 of
register 0 and ending with bit 7 of register 7.
DS1248/DS1248P 1024K NV SRAM with Phantom Clock
6 of 19
Figure 1. Phantom Clock Register Definition
NOTE: THE PATTERN RECOGNITION IN HEX IS C5, 3A, A3, 5C, C5, 3A, A3, 5C. THE ODDS OF THIS PATTERN
BEING ACCIDENTALLY DUPLICATED AND CAUSING INADVERTENT ENTRY TO THE PHANTOM CLOCK IS
LESS THAN 1 IN 1019. THIS PATTERN IS SENT TO THE PHANTOM CLOCK LSB TO MSB.
DS1248/DS1248P 1024K NV SRAM with Phantom Clock
7 of 19
Figure 2. Phantom Clock Register Definition
AM/PM/12/24-MODE
Bit 7 of the hours register is defined as the 12-hour or 24-hour mode-select bit. When high, the 12-hour
mode is selected. In the 12-hour mode, bit 5 is the AM/PM bit with logic high being PM. In the 24-hour
mode, bit 5 is the 20-hour bit (20–23 hours).
OSCILLATOR AND RESET BITS
Bits 4 and 5 of the day register are used to control the RST and oscillator functions. Bit 4 controls the
RST (pin 1). When the RST bit is set to logic 1, the RST input pin is ignored. When the RST bit is set to
logic 0, a low input on the RST pin will cause the phantom clock to abort data transfer without changing
data in the watch registers. Bit 5 controls the oscillator. When set to logic 1, the oscillator is off. When set
to logic 0, the oscillator turns on and the watch becomes operational. These bits are shipped from the
factory set to a logic 1.
DS1248/DS1248P 1024K NV SRAM with Phantom Clock
8 of 19
ZERO BITS
Registers 1, 2, 3, 4, 5, and 6 contain one or more bits, which will always read logic 0. When writing these
locations, either a logic 1 or 0 is acceptable.
BATTERY LONGEVITY
The DS1248 has a lithium power source that is designed to provide energy for clock activity and clock
and RAM data retention when the VCC supply is not present. The capability of this internal power supply
is sufficient to power the DS1248 continuously for the life of the equipment in which it is installed. For
specification purposes, the life expectancy is 10 years at +25°C with the internal clock oscillator running
in the absence of VCC power. Each DS1248 is shipped from Maxim with its lithium energy source
disconnected, guaranteeing full energy capacity. When VCC is first applied at a level greater than VPF, the
lithium energy source is enabled for battery-backup operation. Actual life expectancy of the DS1248 will
be much longer than 10 years since no lithium battery energy is consumed when VCC is present.
See “Conditions of Acceptability” at www.maxim-ic.com/TechSupport/QA/ntrl.htm
CLOCK ACCURACY (DIP MODULE)
The DS1248 is guaranteed to keep time accuracy to within ±1 minute per month at +25°C. The clock is
calibrated at the factory by Maxim using special calibration nonvolatile tuning elements and does not
require additional calibration. For this reason, methods of field clock calibration are not available and not
necessary.
CLOCK ACCURACY (POWERCAP MODULE)
The DS1248P and DS9034PCX are each individually tested for accuracy. Once mounted together, the
module will typically keep time accuracy to within ±1.53 minutes per month (35ppm) at +25°C.
DS1248/DS1248P 1024K NV SRAM with Phantom Clock
9 of 19
ABSOLUTE MAXIMUM RATINGS
Voltage Range on Any Pin Relative to Ground (5V product)………………………..-0.3V to +6.0V
(3.3V product)………………… …..-0.3V to +4.6V
Storage Temperature Range
EDIP ..........................................................................................................................-40ºC to +85ºC
PowerCap ................................................................................................................-55°C to +125°C
Lead Temperature (soldering, 10s) ................................................................................................... +260°C
Note: EDIP is wave or hand-soldered only.
Soldering Temperature (reflow, PowerCap) ......................................................................................+260°C
This is a stress rating only and functional operation of the device at these or any other conditions beyond those indicated in the operation
sections of this specification is not implied. Exposure to absolute maximum rating conditions for extended periods of time can affect
reliability.
OPERATING RANGE
RANGE
TEMP RANGE
(NONCONDENSING)
VCC (V)
Commercial
0°C to +70°C
3.3 ±10% or 5 ±10%
Industrial
-40°C to +85°C
3.3 ±10% or 5 ±10%
RECOMMENDED OPERATING CONDITIONS
Over the Operating Range
PARAMETER SYMBOL MIN TYP MAX UNITS NOTES
Logic 1 VCC = 5V ±10% VIH
2.2
V
CC
+ 0.3
V 11
VCC = 3.3V ±10% 2.0 VCC + 0.3
Logic 0
V
CC
= 5V ±10%
VIL
-0.3
+0.8
V 11
VCC = 3.3V ±10% -0.3 +0.6
DC ELECTRICAL CHARACTERISTICS
Over the Operating Range (5V)
PARAMETER SYMBOL MIN TYP MAX UNITS NOTES
Input Leakage Current
IIL
-1.0
+1.0
µA
12
I/O Leakage Current
CE VIH VCC
IIO -1.0 +1.0 µA
Output Current at 2.4V
IOH
-1.0
mA
Output Current at 0.4V
IOL
2.0
mA
Standby Current CE = 2.2V ICCS1 5 10 mA
Standby Current
CE = VCC - 0.5V ICCS2 3.0 5.0 mA
Operating Current tCYC = 70ns ICC01 85 mA
Write Protection Voltage
VPF
4.25
4.37
4.50
V
11
Battery Switchover Voltage VSO VBAT V 11
DS1248/DS1248P 1024K NV SRAM with Phantom Clock
10 of 19
DC ELECTRICAL CHARACTERISTICS
Over the Operating Range (3.3V)
PARAMETER SYMBOL MIN TYP MAX UNITS NOTES
Input Leakage Current
IIL
-1.0
+1.0
µA
12
I/O Leakage Current
CE
VIH VCC
IIO -1.0 +1.0 µA
Output Current at 2.4V
IOH
-1.0
mA
Output Current at 0.4V
IOL
2.0
mA
Standby Current CE = 2.2V
ICCS1
5
7
mA
Standby Current
CE
= VCC - 0.5V
ICCS2 2.0 3.0 mA
Operating Current tCYC = 70ns
ICC01
50
mA
Write Protection Voltage
VPF
2.80
2.86
2.97
V
11
Battery Switchover Voltage VSO
V
BAT
or
VPF
V 11
CAPACITANCE
(TA = +25°C)
PARAMETER SYMBOL MIN TYP MAX UNITS NOTES
Input Capacitance
C
IN
5
10
pF
Input/Output Capacitance
C
I/O
5
10
pF
MEMORY AC ELECTRICAL CHARACTERISTICS
Over the Operating Range (5V)
PARAMETER SYMBOL
DS1248Y-70
UNITS NOTES
MIN
MAX
Read Cycle Time
tRC
70
ns
Access Time
tACC
70
ns
OE to Output Valid
tOE
35
ns
CE to Output Valid
tCO
70
ns
OE or CE to Output Active
tCOE
5
ns
5
Output High-Z from Deselection
tOD
25
ns
5
Output Hold from Address Change
tOH
5
ns
Write Cycle Time
tWC
70
ns
Write Pulse Width
tWP
50
ns
3
Address Setup Time
tAW
0
ns
Write Recovery Time
tWR
0
ns
Output High-Z from WE
tODW
25
ns
5
Output Active from WE
tOEW
5
ns
5
Data Setup Time
tDS
30
ns
4
Data Hold Time from WE
tDH
5
ns
4
DS1248/DS1248P 1024K NV SRAM with Phantom Clock
11 of 19
PHANTOM CLOCK AC ELECTRICAL CHARACTERISTICS
Over the Operating Range (5V)
PARAMETER SYMBOL MIN TYP MAX UNITS NOTES
Read Cycle Time
tRC
65
ns
CE Access Time
tCO
55
ns
OE Access Time
tOE
55
ns
CE to Output Low-Z
tCOE
5
ns
OE to Output Low-Z
tOEE
5
ns
CE to Output High-Z
tOD
25
ns
5
OE to Output High-Z
tODO
25
ns
5
Read Recovery
tRR
10
ns
Write Cycle Time
tWC
65
ns
Write Pulse Width
tWP
55
ns
3
Write Recovery
tWR
10
ns
10
Data Setup Time
tDS
30
ns
4
Data Hold Time
tDH
0
ns
4
CE Pulse Width
tCW
60
ns
RST Pulse Width
tRST
65
ns
POWER-DOWN/POWER-UP TIMING
Over the Operating Range (3.3V)
PARAMETER SYMBOL MIN TYP MAX UNITS NOTES
CE at VIH before Power-Down tPD 0 µs
V
CC
Slew from V
PF(max)
to
VPF(min)( CE at VPF)
tF 300 µs
VCC Slew from VPF(min) to VSO tFB 10 µs
VCC Slew from VPF(max) to
VPF(min)(CE at VPF) tR 0 µs
CE at VIH after Power-Up tREC 1.5 2.5 ms
(TA = +25°C)
PARAMETER
SYMBOL
MIN
TYP
MAX
UNITS
NOTES
Expected Data-Retention Time
t
DR
10
years
9
Warning: Under no circumstances are negative undershoots of any amplitude allowed when device
is in battery-backup mode.
DS1248/DS1248P 1024K NV SRAM with Phantom Clock
12 of 19
MEMORY AC ELECTRICAL CHARACTERISTICS
Over the Operating Range (3.3V)
PARAMETER SYMBOL
DS1248W-120
UNITS NOTES
MIN
MAX
Read Cycle Time
tRC
120
ns
Access Time
tACC
120
ns
OE to Output Valid
tOE
60
ns
CE to Output Valid
tCO
120
ns
OE or CE to Output Active
tCOE
5
ns
5
Output High-Z from Deselection
tOD
40
ns
5
Output Hold from Address Change
tOH
5
ns
Write Cycle Time
tWC
120
ns
Write Pulse Width
tWP
90
ns
3
Address Setup Time
tAW
0
ns
Write Recovery Time
tWR
20
ns
10
Output High-Z from WE
tODW
40
ns
5
Output Active from WE
tOEW
5
ns
5
Data Setup Time
tDS
50
ns
4
Data Hold Time from WE
tDH
20
ns
4
PHANTOM CLOCK AC ELECTRICALCHARACTERISTICS
Over the Operating Range (3.3V)
PARAMETER SYMBOL MIN TYP MAX UNITS NOTES
Read Cycle Time
tRC
120
ns
CE Access Time
tCO
100
ns
OE Access Time
tOE
100
ns
CE to Output Low-Z
tCOE
5
ns
OE to Output Low-Z
tOEE
5
ns
CE to Output High-Z
tOD
40
ns
5
OE to Output High-Z
tODO
40
ns
5
Read Recovery
tRR
20
ns
Write Cycle Time
tWC
120
ns
Write Pulse Width
tWP
100
ns
3
Write Recovery
tWR
20
ns
10
Data Setup Time
tDS
45
ns
4
Data Hold Time
tDH
0
ns
4
CE Pulse Width
tCW
105
ns
RST Pulse Width
tRST
120
ns
DS1248/DS1248P 1024K NV SRAM with Phantom Clock
13 of 19
POWER-DOWN/POWER-UP TIMING
Over the Operating Range (3.3V)
PARAMETER SYMBOL MIN TYP MAX UNITS NOTES
CE at VIH before Power-Down
tPD
0
µs
V
CC
Slew from V
PF(MAX)
to
VPF(MIN)(
CE
at VIH)
t
F
300
µs
V
CC
Slew from V
PF(MAX)
to
VPF(MIN)(CE at VIH)
t
R
0
µs
CE at VIH after Power-Up
tREC
1.5
2.5
ms
(TA = +25°C)
PARAMETER SYMBOL MIN TYP MAX UNITS NOTES
Expected Data-Retention Time tDR 10 years 9
Warning: Under no circumstances are negative undershoots, of any amplitude, allowed when
device is in battery-backup mode.
MEMORY READ CYCLE (Note 1)
DS1248/DS1248P 1024K NV SRAM with Phantom Clock
14 of 19
MEMORY WRITE CYCLE 1 (Notes 2, 6, and 7)
MEMORY WRITE CYCLE 2 (Notes 2 and 8)
DS1248/DS1248P 1024K NV SRAM with Phantom Clock
15 of 19
RESET FOR PHANTOM CLOCK
READ CYCLE TO PHANTOM CLOCK
WRITE CYCLE TO PHANTOM CLOCK
DS1248/DS1248P 1024K NV SRAM with Phantom Clock
16 of 19
POWER-DOWN/POWER-UP CONDITION (5V)
POWER-DOWN/POWER-UP CONDITION (3.3V)
DS1248/DS1248P 1024K NV SRAM with Phantom Clock
17 of 19
AC TEST CONDITIONS
Output Load: 50pF + 1TTL Gate
Input Pulse Levels: 0 to 3V
Timing Measurement Reference Levels
Input: 1.5V
Output: 1.5V
Input Pulse Rise and Fall Times: 5ns
NOTES:
1) WE is high for a read cycle.
2) OE = VIH or VIL. If CE = VIH during write cycle, the output buffers remain in a high impedance state.
3) tWP is specified as the logical AND of CE and WE. tWP is measured from the latter of CE or WE going
low to the earlier of CE or WE going high.
4) tDH, tDS are measured from the earlier of
CE
or WE going high.
5) These parameters are sampled with a 50pF load and are not 100% tested.
6) If the CE low transition occurs simultaneously with or later than the WE low transition in Write Cycle
1, the output buffers remain in a high-impedance state during this period.
7) If the CE high transition occurs prior to or simultaneously with the WE high transition, the output
buffers remain in a high-impedance state during this period.
8) If WE is low or the WE low transition occurs prior to or simultaneously with the CE low transition,
the output buffers remain in a high impedance state during this period.
9) The expected tDR is defined as cumulative time in the absence of VCC with the clock oscillator
running.
10) tWR is a function of the latter occurring edge of WE or CE.
11) Voltages are referenced to ground.
12) RST (Pin 1) has an internal pullup resistor.
13) RTC modules can be successfully processed through conventional wave-soldering techniques as long
as temperature exposure to the lithium energy source contained within does not exceed +85°C. Post-
solder cleaning with water-washing techniques is acceptable, provided that ultrasonic vibration is not
used. See the PowerCap package drawing for details regarding the PowerCap package.
DS1248/DS1248P 1024K NV SRAM with Phantom Clock
18 of 19
PACKAGE INFORMATION
For the latest package outline information and land patterns (footprints), go to www.maxim-ic.com/packages.
Note that a “+”, “#”, or “-” in the package code indicates RoHS status only. Package drawings may show a
different suffix character, but the drawing pertains to the package regardless of RoHS status.
PACKAGE TYPE PACKAGE CODE OUTLINE NO. LAND PATTERN NO.
32 EDIP MDT32+2 21-0245
34 PWRCP PC2+3 21-0246
DS1248/DS1248P 1024K NV SRAM with Phantom Clock
19 of 19
Maxim cannot assume responsibility for use of any circuitry other than circuitry entirely embodied in a Maxim product. No circuit patent licenses are implied. Maxim
reserves the right to change the circuitry and specifications without notice at any time.
Maxim Integrated Products, 120 San Gabriel Drive, Sunnyvale, CA 94086 408-737-7600
© 2011 Maxim Integrated Products Maxim is a registered trademark of Maxim Integrated Products, Inc.
REVISION HISTORY
REVISION
DATE
DESCRIPTION
PAGES
CHANGED
11/11
Updated the Features, Ordering Information, AM/PM/12/24-MODE,
Absolute Maximum Ratings, and Package Information sections
1, 2, 7, 9, 18
Mouser Electronics
Authorized Distributor
Click to View Pricing, Inventory, Delivery & Lifecycle Information:
Maxim Integrated:
DS1248W-120+ DS1248W-120IND+ DS1248WP-120+ DS1248WP-120IND+ DS1248Y-70+ DS1248Y-70IND+
DS1248YP-70+