Features
Mechanical Data
Terminals: solderable per MIL-STD-750, Method 2026
Polarity: Color band denotes positive end( cathode) except
Bi-directional types.
Standard packaging: 16mm tape per ( EIA 481).
Weight: 0.007 ounce, 0.21 gram
Maximum Ratings @ 25oC Unless Otherwise Specified
Peak Pulse Current on
10/1000us waveform(Note2) IPPM
See page 2,3
Amps
Peak Pulse Power
Disspation on 10/1000us
waveform(Note2,3)
PPPM Minimum
5000 Watts
Operation And Storage
Temperature Range
TJ,
TSTG
-55oC to
+175oC
5.0SMLJ11A
THRU
5.0SMLJ400A
Transient
Voltage Suppressor
11 to 400 Volts
5000 Watt
DIMENSIONS
INCHES MM
DIM MIN MAX MIN MAX NOTE
A .079 .103 2.00 2.62
B .115 .121 2.92 3.07
C .002 .008 0.051 0.203
D .006 .012 0.152 0.305
E .030 .060 0.76 1.52
F ..305 .320 7.75 8.13
G .260 .280 6.60 7.11
H .220 .245 5.59 6.22
0.070”
0.190"
0.125”
SUGGESTED SOLDER
PAD LAYOUT
G
H
E
D
F
A
B
C
DO-214AB
(SMC) (LEAD FRAME)
For surface mount application in order to optimize board space
Low profile package
Glass passivated junction
Excellent clamping capability
Repetition Rate( duty cycle): 0.01%
Fast response time: typical less than 1ps from 0V to BV min
Typical IDless than 1uA above 10V
High temperature soldering: 260oC/10 seconds at terminals
Revision: K
2018/05/08
UL Recognized File # E480232
www.mccsemi .com
1 of 5
•Lead Free Finish/Rohs Compliant (Note1) ("P"Suffix designates
Compliant. See ordering information)
Note:
•Low Inductance
•Built in strain relief
•Epoxy meets UL 94 V-0 flammability rating
•Moisture Sensitivity Level 1
1. High Temperature Solder Exemptions Applied,see EU Directive Annex 7a.
2. Non-repetitive current pulse and derated above TA=25oC
3. Mounted on 8.0mm2 copper pads to each terminal.
4. 8.3ms, single half sine-wave or equivalent square wave, duty cycle=4 pulses per. Minutes
maximum.
Power Dissipation on infinite
heat sink at TL=75oCPD 6.5 Watts
•Halogen free available upon request by adding suffix "-HF"
Micro Commercial Components
M C C
R
Micro Commercial Components
130 W Cochran St, Unit B
Simi Valley, CA 93065
Tel:818-701-4933
Typical Thermal
Resistance 23℃/W
RθJA
MAXIMUM
CLAMPING
VOLTAGE
REVERSE
LEAKAGE
@Ipp @VRWM
Vc(V) ID(µA)
5.0SMLJ 11A 11 12.2 13.5 10 18.2 275 800 5PEN
5.0SMLJ 12A 12 13.3 14.7 10 19.9 252 800 5PEP
5.0SMLJ 13A 13 14.4 15.9 10 21.5 233 500 5PEQ
5.0SMLJ 14A 14 15.6 17.2 10 23.2 216 200 5PER
5.0SMLJ 15A 15 16.7 18.5 1 24.4 205 100 5PES
5.0SMLJ 16A 16 17.8 19.7 1 26 193 50 5PET
5.0SMLJ 17A 17 18.9 20.9 1 27.6 181 20 5PEU
5.0SMLJ 18A 18 20 22.1 1 29.2 172 10 5PEV
5.0SMLJ 20A 20 22.2 24.5 1 32.4 155 5 5PEW
5.0SMLJ 22A 22 24.4 26.9 1 35.5 141 5 5PEX
5.0SMLJ 24A 24 26.7 29.5 1 38.9 129 5 5PEZ
5.0SMLJ 26A 26 28.9 31.9 1 42.1 119 5 5PFE
5.0SMLJ 28A 28 31.1 34.4 1 45.4 110 5 5PFG
5.0SMLJ 30A 30 33.3 36.8 1 48.4 103 5 5PFK
5.0SMLJ 33A 33 36.7 40.6 1 53.3 93.9 5 5PFM
5.0SMLJ 36A 36 40 44.2 1 58.1 86.1 5 5PFP
5.0SMLJ 40A 40 44.4 49.1 1 64.5 77.6 5 5PFR
5.0SMLJ 43A 43 47.8 52.8 1 69.4 72.1 5 5PFT
5.0SMLJ 45A 45 50 55.3 1 72.7 68.8 5 5PFV
5.0SMLJ 48A 48 53.3 58.9 1 77.4 64.7 5 5PFX
5.0SMLJ 51A 51 56.7 62.7 1 82.4 60.7 5 5PFZ
5.0SMLJ 54A 54 60 66.3 1 87.1 57.5 5 5RGE
5.0SMLJ 58A 58 64.4 71.2 1 93.6 53.5 5 5PGG
5.0SMLJ 60A 60 66.7 73.7 1 96.8 51.7 5 5PGK
5.0SMLJ 64A 64 71.1 78.6 1 103 48.6 5 5PGM
5.0SMLJ 70A 70 77.8 86 1 113 44.3 5 5PGP
5.0SMLJ 75A 75 83.3 92.1 1 121 41.4 5 5PGR
5.0SMLJ 78A 78 86.7 95.8 1 126 39.7 5 5PGT
5.0SMLJ 85A 85 94.4 104 1 137 36.5 5 5PGV
5.0SMLJ 90A 90 100 111 1 146 34.3 5 5PGX
5.0SMLJ 100A 100 111 123 1 162 30.9 5 5PGZ
5.0SMLJ 110A 110 122 135 1 177 28.3 5 5PHE
5.0SMLJ 120A 120 133 147 1 193 26 5 5PHG
5.0SMLJ 130A 130 144 159 1 209 24 5 5PHK
5.0SMLJ 150A 150 167 185 1 243 20.6 5 5PHM
5.0SMLJ 160A 160 178 197 1 259 19.3 5 5PHP
5.0SMLJ 170A 170 189 209 1 275 18.2 5 5PHR
DEVICE
MARKING
CODE
PART NUMBER PEAK PULSE
CURRENT
Ipp (A)
TEST
CURRENT
IT (mA)
BREAKDOWN
VOLTAGE
VBR(V)
MAX.@IT
BREAKDOWN
VOLTAGE
VBR(V)
MIN.@IT
REVERSE
STAND- OFF
VOLTAGE
VRWM(V)
5.0SMLJ11A~ 5.0SMLJ400A
www.mccsemi.com
2 of 5
Revision: K 2018/05/08
5.0SMLJ 180A 180 200 220 1 292 17.1 5 5PHT
5.0SMLJ 190A 190 211 258 1 308 16.2 5 5PHV
5.0SMLJ 200A 200 224 247 1 324 15.4 5 5PHW
5.0SMLJ 220A 220 246 272 1 356 14.0 5 5PHX
5.0SMLJ 250A 250 279 309 1 405 12.3 5 5PHZ
5.0SMLJ 300A 300 335 371 1 486 10.3 5 5PJE
5.0SMLJ 350A 350 391 432 1 567 8.8 5 5PJG
5.0SMLJ 400A 400 447 494 1 648 7.7 5 5PJK
Micro Commercial Components
M C C
R
MAXIMUM
CLAMPING
VOLTAGE
REVERSE
LEAKAGE
@Ipp @VRWM
Vc(V) ID(µA)
5.0SMLJ 11CA 11 12.2 13.5 10 18.2 275 800 5BEN
5.0SMLJ 12CA 12 13.3 14.7 10 19.9 252 800 5BEP
5.0SMLJ 13CA 13 14.4 15.9 10 21.5 233 500 5BEQ
5.0SMLJ 14CA 14 15.6 17.2 10 23.2 216 200 5BER
5.0SMLJ 15CA 15 16.7 18.5 1 24.4 205 100 5BES
5.0SMLJ 16CA 16 17.8 19.7 1 26 193 50 5BET
5.0SMLJ 17CA 17 18.9 20.9 1 27.6 181 20 5BEU
5.0SMLJ 18CA 18 20 22.1 1 29.2 172 10 5BEV
5.0SMLJ 20CA 20 22.2 24.5 1 32.4 155 5 5BEW
5.0SMLJ 22CA 22 24.4 26.9 1 35.5 141 5 5BEX
5.0SMLJ 24CA 24 26.7 29.5 1 38.9 129 5 5BEZ
5.0SMLJ 26CA 26 28.9 31.9 1 42.1 119 5 5BFE
5.0SMLJ 28CA 28 31.1 34.4 1 45.4 110 5 5BFG
5.0SMLJ 30CA 30 33.3 36.8 1 48.4 103 5 5BFK
5.0SMLJ 33CA 33 36.7 40.6 1 53.3 93.9 5 5BFM
5.0SMLJ 36CA 36 40 44.2 1 58.1 86.1 5 5BFP
5.0SMLJ 40CA 40 44.4 49.1 1 64.5 77.6 5 5BFR
5.0SMLJ 43CA 43 47.8 52.8 1 69.4 72.1 5 5BFT
5.0SMLJ 45CA 45 50 55.3 1 72.7 68.8 5 5BFV
PART NUMBER
REVERSE
STAND- OFF
VOLTAGE
VRWM(V)
BREAKDOWN
VOLTAGE
VBR(V)
MIN.@IT
BREAKDOWN
VOLTAGE
VBR(V)
MAX.@IT
TEST
CURRENT
IT (mA)
PEAK PULSE
CURRENT
Ipp (A)
DEVICE
MARKING
CODE
5.0SMLJ11CA~5.0SMLJ170CA
www.mccsemi .com
3 of 5
Revision: K
2018/05/08
For Bidirectional type having Vrwm of 20 volts and less,the Ir limit is double.
5.0SMLJ 48CA 48 53.3 58.9 1 77.4 64.7 5 5BFX
5.0SMLJ 51CA 51 56.7 62.7 1 82.4 60.7 5 5BFZ
5.0SMLJ 54CA 54 60 66.3 1 87.1 57.5 5 5BGE
5.0SMLJ 58CA 58 64.4 71.2 1 93.6 53.5 5 5BGG
5.0SMLJ 60CA 60 66.7 73.7 1 96.8 51.7 5 5BGK
5.0SMLJ 64CA 64 71.1 78.6 1 103 48.6 5 5BGM
5.0SMLJ 70CA 70 77.8 86 1 113 44.3 5 5BGP
5.0SMLJ 75CA 75 83.3 92.1 1 121 41.4 5 5BGR
5.0SMLJ 78CA 78 86.7 95.8 1 126 39.7 5 5BGT
5.0SMLJ 85CA 85 94.4 104 1 137 36.5 5 5BGV
5.0SMLJ 90CA 90 100 111 1 146 34.3 5 5BGX
5.0SMLJ 100CA 100 111 123 1 162 30.9 5 5BGZ
5.0SMLJ 110CA 110 122 135 1 177 28.3 5 5BHE
5.0SMLJ 120CA 120 133 147 1 193 26 5 5BHG
5.0SMLJ 130CA 130 144 159 1 209 24 5 5BHK
5.0SMLJ 150CA 150 167 185 1 243 20.6 5 5BHM
5.0SMLJ 160CA 160 178 197 1 259 19.3 5 5BHP
5.0SMLJ 170CA 170 189 209 1 275 18.2 5 5BHR
Micro Commercial Components
M C C
R
0.1
1
10
100
1000
0.000001 0.00001 0.0001 0.001
td-Pulse Width (Sec.)
P
PPM
-Peak Pulse Power (KW)
0.0000001
0.31x0.31" (8.0x8.0mm)
Copper Pad Area
Ratings and Characteristic Curves (TA=25°C unless otherwise noted)
IPPM- Peak Pulse Current, % IRSM
0
0
50
100
150
1.0 2.0 3.0 4.0
tr=10µsec
Peak Value
IPPM
IPPM
2
TJ=25°C
Pulse Width(td) is defined
as the point where the peak
current decays to 50% of IPPM
10/1000µsec. Waveform
as defined by R.E.A
td
t-Time (ms)
Half Value
IPPM ( )
0
20
40
60
80
100
0255075100 125 150 175
Peak Pulse Power (PPP) or
Current (IPP) Derating in
Percentage %
Tj-Initial temperature (ºC)
1
10
100
1000
10000
100000
1.010.0100.0 1000.0
Cj (pF)
VBR - Reverse Breakdown Voltage (V)
Bi-directional
@ VR
Uni-direct ional V
= OV
Bi-directional V
= OV
Uni-direct ional
@ VR
0
0.5
1
1.5
2
2.5
3
3.5
4
4.5
5
5.5
6
6.5
0255075100 125 150 175
PM(AV), Steady State Power Dissipation (W)
TA-Ambient Temperature (ºC)
Figure 1 - Peak Pulse Power Rating CurveFigure 2 - Peak Pulse Power or Current Derating Curve
vs Initial Junction Temperature
Figure 3 - Pulse Waveform Figure 4 - Typical Junction Capacitance
Figure 5 - Steady State Power Derating Curve
110100
Number of Cycles at 60 Hz
0
50
100
150
200
250
300
350
IFSM - Peak Forward Surge Current (A)
Figure 6 - Maximum Non-Repetitive Peak Forward
Surge Current Uni-Directional Only
5.0SMLJ11A~5.0SMLJ400A
Revision: K
2018/05/08
www.mccsemi .com
4 of 5
Micro Commercial Components
M C C
R
Revision: K
2018/05/08
www.mccsemi.com
5 of 5
Device Packing
Part Number-TPTape&Reel: 3Kpcs/Reel
Ordering Information :
***IMPORTANT NOTICE***
Micro Commercial Components Corp. reserves the right to make changes without further notice to any product herein to
make corrections, modifications , enhancements , improvements , or other changes . Micro Commercial Components
Corp . does not assume any liability arising out of the application or use of any product described herein; neither does it
convey any license under its patent rights ,nor the rights of others . The user of products in such applications shall assume all
risks of such use and will agree to hold Micro Commercial Components Corp . and all the companies whose products are
represented on our website, harmless against all damages.
***LIFE SUPPORT***
MCC's products are not authorized for use as critical components in life support devices or systems without the express written
approval of Micro Commercial Components Corporation.
***CUSTOMER AWARENESS***
Counterfeiting of semiconductor parts is a growing problem in the industry. Micro Commercial Components (MCC) is taking
strong measures to protect ourselves and our customers from the proliferation of counterfeit parts. MCC strongly encourages
customers to purchase MCC parts either directly from MCC or from Authorized MCC Distributors who are listed by country on
our web page cited below. Products customers buy either from MCC directly or from Authorized MCC Distributors are genuine
parts, have full traceability, meet MCC's quality standards for handling and storage. MCC will not provide any warranty
coverage or other assistance for parts bought from Unauthorized Sources. MCC is committed to combat this global
problem and encourage our customers to do their part in stopping this practice by buying direct or from authorized
distributors.
Note : Adding "-HF" suffix for halogen free, eg. Part Number-TP-HF
Micro Commercial Components
M C C
R
