LITE-ON SEMICONDUCTOR ES2A thru ES2J REVERSE VOLTAGE - 50 to 600 Volts FORWARD CURRENT - 2.0 Amperes SURFACE MOUNT SUPER FAST RECTIFIERS FEATURES SMB Glass passivated chip Super fast switching for high efficiency For surface mounted applications Low forward voltage drop and high current capability Low reverse leakage current Plastic material has UL flammability classification 94V-0 SMB A B C G MECHANICAL DATA H Case : Molded plastic Polarity : Color band denotes cathode Weight : 0.003 ounces, 0.093 grams D F E DIM. MIN. MAX. A 4.06 4.57 B 3.30 3.94 C 1.96 2.21 D 0.15 0.31 E 5.21 5.59 F 0.05 0.20 G 2.01 2.50 H 0.76 1.52 All Dimensions in millimeter MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25 ambient temperature unless otherwise specified. SYMBOL ES2A ES2B ES2C ES2D ES2G ES2J UNIT Maximum Recurrent Peak Reverse Voltage VRRM 50 100 150 200 400 600 V Maximum RMS Voltage VRMS 35 70 105 140 280 420 V Maximum DC Blocking Voltage VDC 50 100 150 200 400 600 V CHARACTERISTICS Maximum Average Forward Rectified Current @TL =110 C Peak Forward Surge Current 8.3ms single half sine-wave super imposed on rated load (JEDEC METHOD) I(AV) 2.0 A IFSM 50 A Maximum forward Voltage at 2.0A DC VF Maximum DC Reverse Current @TJ =25 C at Rated DC Blocking Voltage @TJ=125 C IR 1.25 0.92 1.30 5.0 350 V uA Maximum Reverse Recovery Time (Note 1) TRR 25 35 ns Typical Reverse Recovery Time TRR 20 30 ns Typical Junction Capacitance (Note 2) Typical Thermal Resistance (Note 3) Operating Temperature Range Storage Temperature Range CJ R JL pF 25 20 25 C/W TJ -55 to + 150 C TSTG -55 to + 150 C NOTES : 1.Reverse Recovery Test Conditions :IF=0.5A,IR=1.0A,IRR=0.25A. 2.Measured at 1.0MHz and applied reverse voltage of 4.0V DC. 3.Thermal Resistance junction to Lead. REV. 5, Sep-2010, KSGB01 AVERAGE FORWARD CURRENT AMPERES FIG.1 - FORWARD CURRENT DERATING CURVE 2.5 2.0 1.5 1.0 SINGLE PHASE HALF WAVE 60Hz RESISTIVE OR INDUCTIVE LOAD 0 20 60 40 80 100 120 140 PEAK FORWARD SURGE CURRENT, AMPERES RATING AND CHARACTERISTIC CURVES ES2A thru ES2J FIG.2 - MAXIMUM NON-REPETITIVE SURGE CURRENT 60 50 40 30 20 Pulse Width 8.3ms Single Half-Sine-Wave (JEDEC METHOD) 10 0 1 160 2 LEAD TEMPERATURE , C 20 10 50 100 NUMBER OF CYCLES AT 60Hz FIG.4 - TYPICAL REVERSE CHARACTERISTICS FIG.3 - TYPICAL FORWARD CHARACTERISTICS 1000 ES2A - ES2D INSTANTANEOUS REVERSE CURRENT ,(uA) 10 INSTANTANEOUS FORWARD CURRENT ,(A) 5 ES2J ES2G 1.0 TJ = 25 C 0.1 PULSEWIDTH:300us TJ = 125 C 100 10 TJ = 25 C 1.0 0.1 .01 0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 INSTANTANEOUS FORWARD VOLTAGE, VOLTS 1.8 0 20 40 60 80 100 120 140 PERCENT OF RATED PEAK REVERSE VOLTAGE, (%) Legal Disclaimer Notice ES2A thru ES2J Important Notice and Disclaimer LSC reserves the right to make changes to this document and its products and specifications at any time without notice. Customers should obtain and confirm the latest product information and specifications before final design, purchase or use. LSC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does LSC assume any liability for application assistance or customer product design. LSC does not warrant or accept any liability with products which are purchased or used for any unintended or unauthorized application. No license is granted by implication or otherwise under any intellectual property rights of LSC. LSC products are not authorized for use as critical components in life support devices or systems without express written approval of LSC.