Test Qualification for Passive Components in Automotive Applications n Operating temperature range up to 125 C n Low thermal derating factor n Higher hold currents at elevated temperature AE C- RH7 5 718 0 0S OM & PL AE IAN C T, CO * M *H PL AL IA O NT GE N n Choice of operating currents C * Q2 RoH 00 S C an OM d PL IA N n Compliant with AEC-Q200 Rev-C- Stress *R oH S T Features n RoHS compliant* and halogen free** n Resettable fault protection of general electronic equipment MF-RHT Series - High Temperature PTC Resettable Fuses Electrical Characteristics Model V max. Volts I max. Amps Ihold Amperes at 23 C Itrip Hold Trip MF-RHT050 30 40 0.5 0.92 MF-RHT100 30 40 1.0 1.8 MF-RHT070 MF-RHT200 MF-RHT200/32 MF-RHT300 MF-RHT400 MF-RHT450 MF-RHT500 16 40 16 100 16 100 16 100 32 16 16 50 100 100 0.7 2.0 2.0 3.0 4.0 4.5 5.0 1.4 3.8 3.8 6.0 7.5 7.8 9.0 Resistance Ohms at 23 C R1Max. RMin. (Post Trip) 0.4800 1.10 15.0 0.0220 0.054 0.0240 0.0175 MF-RHT650 16 100 6.5 12.0 0.0110 MF-RHT750 MF-RHT800 MF-RHT900 MF-RHT1000 MF-RHT1100 MF-RHT1300 16 16 16 16 16 16 16 100 100 100 100 7.0 7.5 8.0 9.0 100 10.0 100 13.0 100 11.0 0.43 0.110 0.060 0.045 24.0 0.0055 0.0041 3.0 9.0 3.0 3.3 3.6 3.6 5.5 4.3 0.0080 20.0 5.0 1.4 32.5 15.0 0.0062 25.0 5.0 1.4 0.026 0.025 18.5 22.5 3.0 3.5 0.0100 0.0074 20.0 3.0 1.4 6.0 13.0 16.5 12.5 4.0 27.5 0.0215 0.0094 3.5 0.037 0.0130 13.1 1.4 0.079 0.0150 MF-RHT700 5.2 0.0330 0.0450 10.0 10.8 5.0 12.5 5.5 6.0 0.9 0.110 100 100 Typ. 2.5 0.0450 16 16 Max. 0.80 0.1800 Tripped Power Dissipation Watts at 23 C 2.5 0.3000 MF-RHT550 MF-RHT600 Max. Time To Trip Amperes Seconds at 23 C at 23 C 0.022 0.020 0.017 0.015 0.013 0.010 30.0 35.0 37.5 40.0 5.0 7.0 7.0 8.0 45.0 10.0 55.0 11.0 50.0 60.0 9.0 13.0 4.1 4.0 4.5 4.2 5.0 5.3 5.5 6.9 Environmental Characteristics Operating Temperature.......................................... -40 C to +125 C Storage Temperature............................................. -40 C to +85 C Passive Aging........................................................ +85 C, 1000 hours................................................ 5 % typical resistance change Humidity Aging...................................................... +85 C, 85 % R.H. 1000 hours.............................. 5 % typical resistance change Thermal Shock...................................................... MIL-STD-202, Method 107.................................... 10 % typical resistance change +125 C to -40 C, 10 cycles Vibration................................................................ MIL-STD-883C, Method 2007.1,............................ No change Condition A Moisture Sensitivity Level (MSL)........................... Level 1 ESD Classification - HBM...................................... Class 6 Test Procedures And Requirements For Model MF-RHT Series Test Test Conditions Accept/Reject Criteria Visual/Mech........................................................... Verify dimensions and materials............................ Per MF physical description Resistance............................................................. In still air @ 23 C.................................................. Rmin R R1max Time to Trip............................................................ At specified current, Vmax, 23 C.......................... T max. time to trip (seconds) Hold Current.......................................................... 30 min. at Ihold...................................................... No trip Trip Cycle Life........................................................ Vmax, Imax, 100 cycles......................................... No arcing or burning Trip Endurance...................................................... Vmax, 48 hours...................................................... No arcing or burning Solderability........................................................... MIL-STD-202, Method 208.................................... 95 % min. coverage * RoHSDirective2015/863,Mar31,2015andAnnex. **Bournsconsidersaproducttobe"halogenfree"if(a)theBromine(Br)contentis900ppmorless; (b) the Chlorine (Cl)contentis900ppmorless;and(c)thetotalBromine(Br) andChlorine(Cl)contentis1500ppmorless. Specifications are subject to change without notice. Users should verify actual device performance in their specific applications. The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf. Applications n Protection of automotive circuitry including engine control modules n Overcurrent surge protection of electronic equipment required to operate at high operating temperature ranges n Resettable fault protection of general electronic equipment MF-RHT Series - High Temperature PTC Resettable Fuses Thermal Derating Chart - Ihold (Amps) Model MF-RHT050 MF-RHT070 MF-RHT100 MF-RHT200 MF-RHT200/32 MF-RHT300 MF-RHT400 MF-RHT450 MF-RHT500 MF-RHT550 MF-RHT600 MF-RHT650 MF-RHT700 MF-RHT750 MF-RHT800 MF-RHT900 MF-RHT1000 MF-RHT1100 MF-RHT1300 -40 C 0.68 0.95 1.36 2.71 2.71 4.07 5.57 6.1 6.78 7.47 8.20 8.8 9.51 10.2 10.87 12.21 13.6 14.94 17.7 -20 C 0.62 0.87 1.24 2.49 2.49 3.74 5.11 5.6 6.22 6.86 7.50 8.1 8.73 9.4 9.98 11.19 12.5 13.72 16.3 0 C 0.56 0.79 1.13 2.26 2.26 3.41 4.65 5.1 5.67 6.24 6.80 7.4 7.95 8.6 9.08 10.16 11.4 12.49 14.8 Ambient Operating Temperature 23 C 0.5 0.7 1.0 2.00 2.00 3.00 4.00 4.5 5.0 5.5 6.0 6.5 7.0 7.5 8.0 9.0 10.0 11.0 13.0 40 C 0.44 0.62 0.89 1.77 1.77 2.65 3.62 4.0 4.44 4.85 5.3 5.7 6.17 6.6 7.06 7.97 8.8 9.7 11.4 50 C 0.4 0.56 0.80 1.60 1.60 2.40 3.29 3.6 4 4.41 4.9 5.3 5.61 6.1 6.41 7.20 8.10 8.82 10.5 How to Order 70 C 0.34 0.47 0.67 1.34 1.34 2.00 2.73 3.0 3.33 3.66 4 4.3 4.66 5.0 5.33 6.04 6.60 7.32 8.6 85 C 0.28 0.39 0.56 1.11 1.11 1.66 2.27 2.5 2.78 3.05 3.3 3.6 3.88 4.1 4.43 5.01 5.50 6.09 7.2 125 C 0.12 0.17 0.24 0.49 0.49 0.74 1.01 1.1 1.22 1.36 1.5 1.6 1.73 1.9 1.97 2.19 2.5 2.71 3.3 Typical Part Marking MF - RHT 200 /32 - __ - 14 Multifuse(R) Product Designator Series RHT = High Temperature Radial Leaded Component Hold Current, Ihold 050 - 1300 (0.50 - 13.00 Amps) Higher Voltage Option Blank = Standard Voltage /32 = 32 Volts Packaging Options Blank = Bulk Packaging - 2 = Tape & Reel* - AP = Ammo-Pak* Part Number Suffix Option - 14 = Kinked Leads in Place of Std. Straight Leads - 17 = Straight Leads in Place of Std. Kinked Leads 60 C 0.36 0.51 0.73 1.46 1.46 2.21 3.01 3.3 3.67 4.04 4.4 4.8 5.15 5.6 5.88 6.56 7.40 8.09 9.6 Represents total content. Layout may vary. PART IDENTIFICATION MANUFACTURER'S TRADEMARK RH750 7180S DATECODE (FIRSTDIGIT= LASTDIGITOFYEAR; NEXTTHREEDIGITS= DAYOFYEAR) EXAMPLE:7180=2017DAY180 COUNTRYOF MANUFACTURE (S=CHINA) *Packaged per EIA 486-B Specifications are subject to change without notice. Users should verify actual device performance in their specific applications. The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf. MF-RHT Series - High Temperature PTC Resettable Fuses Product Dimensions Model MF-RHT050 MF-RHT070 MF-RHT100 MF-RHT200 MF-RHT200/32 MF-RHT300 MF-RHT400 MF-RHT450 MF-RHT500 MF-RHT550 MF-RHT600 MF-RHT650 MF-RHT700 MF-RHT750 MF-RHT800 MF-RHT900 MF-RHT1000 MF-RHT1100 MF-RHT1300 A Max. 7.40 (0.291) 6.86 (0.27) 9.70 (0.382) 9.4 (0.37) 9.4 (0.37) 8.80 (0.35) 10.0 (0.394) 10.4 (0.41) 11.2 (0.441) 11.2 (0.441) 11.2 (0.441) 12.7 (0.50) 14.0 (0.55) 14.0 (0.55) 16.5 (0.65) 16.5 (0.65) 17.5 (0.689) 21.0 (0.65) 23.5 (0.925) B Max. 12.7 (0.500) 10.8 (0.425) 13.6 (0.535) 14.0 (0.55) 14.0 (0.55) 13.8 (0.55) 15.0 (0.591) 15.6 (0.61) 18.9 (0.744) 18.9 (0.744) 21.0 (0.827) 22.2 (0.88) 21.9 (0.862) 23.5 (0.93) 22.5 (0.88) 25.7 (1.012) 26.7 (0.51) 26.1 (0.88) 28.7 (1.17) Nom. 5.1 (0.201) 5.1 (0.201) 5.1 (0.201) 5.1 (0.201) 5.1 (0.201) 5.1 (0.201) 5.1 (0.201) 5.1 (0.201) 5.1 (0.201) 5.1 (0.201) 5.1 (0.201) 5.1 (0.201) 5.1 (0.201) 5.1 (0.201) 5.1 (0.201) 5.1 (0.201) 10.2 (0.402) 10.2 (0.402) 10.2 (0.402) C Tol. 0.7 (0.028) 0.7 (0.028) 0.7 (0.028) 0.7 (0.028) 0.7 (0.028) 0.7 (0.028) 0.7 (0.028) 0.7 (0.028) 0.7 (0.028) 0.7 (0.028) 0.7 (0.028) 0.7 (0.028) 0.7 (0.028) 0.7 (0.028) 0.7 (0.028) 0.7 (0.028) 0.7 (0.028) 0.7 (0.028) 0.7 (0.028) D Min. 7.6 (0.30) 7.6 (0.30) 7.6 (0.30) 7.6 (0.30) 7.6 (0.30) 7.6 (0.30) 7.6 (0.30) 7.6 (0.30) 7.6 (0.30) 7.6 (0.30) 7.6 (0.30) 7.6 (0.30) 7.6 (0.30) 7.6 (0.30) 7.6 (0.30) 7.6 (0.30) 7.6 (0.30) 7.6 (0.30) 7.6 (0.30) E Max. 3.0 (0.12) 3.0 (0.12) 3.0 (0.12) 3.0 (0.12) 3.0 (0.12) 3.0 (0.12) 3.0 (0.12) 3.0 (0.12) 3.0 (0.12) 3.0 (0.12) 3.0 (0.12) 3.0 (0.12) 3.0 (0.12) 3.0 (0.12) 3.0 (0.12) 3.0 (0.12) 3.0 (0.12) 3.0 (0.12) 3.6 (0.14) F Nom. 0.51 (0.020) 0.51 (0.020) 0.51 (0.020) 0.51 (0.020) 0.51 (0.020) 0.81 (0.032) 0.81 (0.032) 0.81 (0.032) 0.81 (0.032) 0.81 (0.032) 0.81 (0.032) 0.81 (0.032) 0.81 (0.032) 0.81 (0.032) 0.81 (0.032) 0.81 (0.032) 0.81 (0.032) 0.81 (0.032) 1.0 (0.040) Physical Characteristics Style Material 3 Sn/CuFe 1 Sn/CuFe 3 Sn/CuFe 3 Sn/CuFe 3 Sn/CuFe 2 Sn/Cu 2 Sn/Cu 2 Sn/Cu 2 Sn/Cu 2 Sn/Cu 2 Sn/Cu 2 Sn/Cu 2 Sn/Cu 2 Sn/Cu 2 Sn/Cu 2 Sn/Cu 2 Sn/Cu 2 Sn/Cu 2 Sn/Cu MM Packaging: 0.51 (24AWG) DIMENSIONS: (INCHES) BULK: MF-RHT050~MF-RHT800 = 500 pcs. per bag; MF-RHT900~MF-RHT1300 = 250 pcs. per bag 0.81 (20AWG) 1.0 (18AWG) TAPE & REEL: MF-RHT050~MF-RHT400 = 3000 pcs. per reel; MF-RHT450~MF-RHT700 = 1500 pcs. per reel; MF-RHT750~MF-RHT1300 = 1000 pcs. per reel AMMO-PACK: MF-RHT050~MF-RHT400 = 2000 pcs. per pack; MF-RHT450~MF-RHT900 = 1000 pcs. per pack, MF-RHT1000~MF-RHT1300 = 500 pcs. per pack A A E A E E B B B Also available with kinked and straight leads in place of standard leads (see How to Order). D D D C F C F C F Specifications are subject to change without notice. Users should verify actual device performance in their specific applications. The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf. MF-RHT Series - High Temperature PTC Resettable Fuses Typical Time to Trip at 23 C MF-RHT600 MF-RHT550 MF-RHT500 MF-RHT450 MF-RHT400 MF-RHT300 MF-RHT200, MF-RHT200/32 MF-RHT100 MF-RHT650 MF-RHT700 MF-RHT750 MF-RHT800 MF-RHT900 MF-RHT1000 MF-RHT1100 MF-RHT1300 1000 MF-RHT070 100 Time to Trip (Seconds) MF-RHT050 10 1 0.1 0.01 1 10 100 Fault Current (Amps) The Time to Trip curves represent typical performance of a device in a simulated application environment. Actual performance in specific customer applications may differ from these values due to the influence of other variables. MF-RHT SERIES, REV. N, 05/18 Specifications are subject to change without notice. Users should verify actual device performance in their specific applications. The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf. MF-RHT Series Tape and Reel Specifications Devices taped using EIA468-B/IEC60286-2 standards. See table below and Figures 1 and 2 for details. Carrier tape width W W Hold down tape width W0 W4 Dimensions Dimensions Tolerance 18 -0.5/+1.0 (.709) (-0.02/+.039) 11 min. (.433) Hold down tape No protrusion Dimension Description Top distance between tape edges IEC Mark W2 EIA Mark W6 Sprocket hole position W1 W5 Sprocket hole diameter D0 D0 Abscissa to plane (straight lead) H H Abscissa to plane (kinked lead) H0 H0 Abscissa to top: MF-RHT050 ~ MF-RHT450 H1 H1 Abscissa to top: MF-RHT500 ~ MF-RHT1300 H1 H1 Overall width w/lead protrusion: MF-RHT050 ~ MF-RHT450 C1 Overall width w/lead protrusion: MF-RHT500 ~ MF-RHT1300 C1 Overall width w/o lead protrusion: MF-RHT050 ~ MF-RHT450 C2 Overall width w/o lead protrusion: MF-RHT500 ~ MF-RHT1300 C2 Lead protrusion I1 L1 Protrusion of cutout L L Protrusion beyond hold-down tape I2 I2 P0 P0 3 (.118) 9 (.354) 4 (.157) 18.5 (.728) 16 (.63) 32.2 (1.268) 45.0 (1.837) 42.5 (1.673) 55.0 (2.165) 42.5 (1.673) 54.0 (2.126) 1.0 (.039) 11 (.433) max. -0.5/+0.75 (-0.02/+0.03) 0.2 (.0078) 3.0 (.118) 0.5 (.02) max. max. max. max. max. max. max. max. Not specified 0.3 (.012) 1 Pitch tolerance 20 consecutive (.039) 25.4 0.6 Device pitch (1.0) (.024) 0.9 Tape thickness t t max. (.035) 1.5 Tape thickness with splice: MF-RHT050 ~ MF-RHT200 t1 max. (.059) 2.3 Tape thickness with splice: MF-RHT300 ~ MF-RHT1300 t1 max. (.091) 4.0 0.2 Splice sprocket hole alignment (.157) (.008) 1 Body lateral deviation h h 0 (.039) 0.3 Body tape plane deviation p p 0 (.012) 3.81 0.07 Ordinate to adjacent component lead P1 P1 (.015) (.028) Sprocket hole pitch 12.7 (0.5) DIMENSIONS: MM (INCHES) Specifications are subject to change without notice. Users should verify actual device performance in their specific applications. The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf. MF-RHT Series Tape and Reel Specifications IEC Mark Dimension Description EIA Mark Lead spacing: MF-RHT050 ~ MF-RHT900 F F Lead spacing: MF-RHT1000 ~ MF-RHT1300 F F Reel width: MF-RHT050 ~ MF-RHT450 w W2 Reel width: MF-RHT500 ~ MF-RHT1300 w W2 Reel diameter d a Space between flanges less device W1 h h Arbor hole diameter h f c h Core diameter Box n Reference plane Consecutive missing places P1 H1 Dimensions Dimensions Tolerance 5.08 -0.2/+0.8 (0.2) (-0.006/+0.031) 10.2 -0.2/+0.8 (0.402)(-0.006/+0.031) 56 max. (2.20) 63.5 max. (2.50) 370.0 max. (14.57) 4.75 3.25 (.187) (.128) 26.0 p p12.0 (1.02) (.472) 80.0 max. (3.15) 62355345 (2.44)(14.0) (13.6) 3H1 F Empty places per reel A L Taped Component Dimensions - Figure 1 H0 B W0 Not specified W1 W p h h I2 P0 I1 F A L I2 D0 Reference plane P1 H1 I1 H0 B P0 W0 D0 p User direction of feed Cross section A - B H1 H t W1 W User direction of feed Cross section A - B Reel Dimensions - Figure 2 max. H DIMENSIONS: MM (INCHES) t Reel Upper side Tape h d User direction of feed Lower side f Reel h w Upper side h Specifications are subject to change without notice. Users should verify actual device performance in their specific applications. Tape User The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf. d direction of Bourns PPTC Resettable Fuses 3312 - (R)2 Multifuse mm SMD(R) Trimming Potentiometer Application Notice * Users are responsible for independent and adequate evaluation of Bourns(R) Multifuse(R) Polymer PTC devices in the user's application, including the PPTC device characteristics stated in the applicable data sheet. * Polymer PTC devices must not be allowed to operate beyond their stated maximum ratings. Operation in excess of such maximum ratings could result in damage to the PTC device and possibly lead to electrical arcing and/or fire. Circuits with inductance may generate a voltage above the rated voltage of the polymer PTC device and should be thoroughly evaluated within the user's application during the PTC selection and qualification process. * Polymer PTC devices are intended to protect against adverse effects of temporary overcurrent or overtemperature conditions up to rated limits and are not intended to serve as protective devices where overcurrent or overvoltage conditions are expected to be repetitive or prolonged. * In normal operation, polymer PTC devices experience thermal expansion under fault conditions. Thus, a polymer PTC device must be protected against mechanical stress, and must be given adequate clearance within the user's application to accommodate such thermal expansion. Rigid potting materials or fixed housings or coverings that do not provide adequate clearance should be thoroughly examined and tested by the user, as they may result in the malfunction of polymer PTC devices if the thermal expansion is inhibited. * Exposure to lubricants, silicon-based oils, solvents, gels, electrolytes, acids, and other related or similar materials may adversely affect the performance of polymer PTC devices. * Aggressive solvents may adversely affect the performance of polymer PTC devices. Conformal coating, encapsulating, potting, molding, and sealing materials may contain aggressive solvents including but not limited to xylene and toluene, which are known to cause adverse effects on the performance of polymer PTCs. Such aggressive solvents must be thoroughly cured or baked to ensure their complete removal from polymer PTCs to minimize the possible adverse effect on the device. * Recommended storage conditions should be followed at all times. Such conditions can be found on the applicable data sheet and on the Multifuse(R) Polymer PTC Moisture/Reflow Sensitivity Classification (MSL) note: https://www.bourns.com/docs/RoHS-MSL/msl_mf.pdf MFAN 12/18 Specifications are subject to change without notice. Users should verify actual device performance in their specific applications. The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf. Legal Disclaimer Notice This legal disclaimer applies to purchasers and users of Bourns(R) products manufactured by or on behalf of Bourns, Inc. and its affiliates (collectively, "Bourns"). Unless otherwise expressly indicated in writing, Bourns(R) products and data sheets relating thereto are subject to change without notice. Users should check for and obtain the latest relevant information and verify that such information is current and complete before placing orders for Bourns(R) products. The characteristics and parameters of a Bourns(R) product set forth in its data sheet are based on laboratory conditions, and statements regarding the suitability of products for certain types of applications are based on Bourns' knowledge of typical requirements in generic applications. The characteristics and parameters of a Bourns(R) product in a user application may vary from the data sheet characteristics and parameters due to (i) the combination of the Bourns(R) product with other components in the user's application, or (ii) the environment of the user application itself. The characteristics and parameters of a Bourns(R) product also can and do vary in different applications and actual performance may vary over time. Users should always verify the actual performance of the Bourns(R) product in their specific devices and applications, and make their own independent judgments regarding the amount of additional test margin to design into their device or application to compensate for differences between laboratory and real world conditions. Unless Bourns has explicitly designated an individual Bourns(R) product as meeting the requirements of a particular industry standard (e.g., ISO/TS 16949) or a particular qualification (e.g., UL listed or recognized), Bourns is not responsible for any failure of an individual Bourns(R) product to meet the requirements of such industry standard or particular qualification. Users of Bourns(R) products are responsible for ensuring compliance with safety-related requirements and standards applicable to their devices or applications. Bourns(R) products are not recommended, authorized or intended for use in nuclear, lifesaving, life-critical or life-sustaining applications, nor in any other applications where failure or malfunction may result in personal injury, death, or severe property or environmental damage. Unless expressly and specifically approved in writing by two authorized Bourns representatives on a case-by-case basis, use of any Bourns(R) products in such unauthorized applications might not be safe and thus is at the user's sole risk. Life-critical applications include devices identified by the U.S. Food and Drug Administration as Class III devices and generally equivalent classifications outside of the United States. Bourns expressly identifies those Bourns(R) standard products that are suitable for use in automotive applications on such products' data sheets in the section entitled "Applications." Unless expressly and specifically approved in writing by two authorized Bourns representatives on a case-by-case basis, use of any other Bourns(R) standard products in an automotive application might not be safe and thus is not recommended, authorized or intended and is at the user's sole risk. If Bourns expressly identifies a sub-category of automotive application in the data sheet for its standard products (such as infotainment or lighting), such identification means that Bourns has reviewed its standard product and has determined that if such Bourns(R) standard product is considered for potential use in automotive applications, it should only be used in such sub-category of automotive applications. Any reference to Bourns(R) standard product in the data sheet as compliant with the AEC-Q standard or "automotive grade" does not by itself mean that Bourns has approved such product for use in an automotive application. Bourns(R) standard products are not tested to comply with United States Federal Aviation Administration standards generally or any other generally equivalent governmental organization standard applicable to products designed or manufactured for use in aircraft or space applications. Bourns expressly identifies Bourns(R) standard products that are suitable for use in aircraft or space applications on such products' data sheets in the section entitled "Applications." Unless expressly and specifically approved in writing by two authorized Bourns representatives on a case-by-case basis, use of any other Bourns(R) standard product in an aircraft or space application might not be safe and thus is not recommended, authorized or intended and is at the user's sole risk. The use and level of testing applicable to Bourns(R) custom products shall be negotiated on a case-by-case basis by Bourns and the user for which such Bourns(R) custom products are specially designed. Absent a written agreement between Bourns and the user regarding the use and level of such testing, the above provisions applicable to Bourns(R) standard products shall also apply to such Bourns(R) custom products. Users shall not sell, transfer, export or re-export any Bourns(R) products or technology for use in activities which involve the design, development, production, use or stockpiling of nuclear, chemical or biological weapons or missiles, nor shall they use Bourns(R) products or technology in any facility which engages in activities relating to such devices. The foregoing restrictions apply to all uses and applications that violate national or international prohibitions, including embargos or international regulations. Further, Bourns(R) products and Bourns technology and technical data may not under any circumstance be exported or re-exported to countries subject to international sanctions or embargoes. Bourns(R) products may not, without prior authorization from Bourns and/or the U.S. Government, be resold, transferred, or re-exported to any party not eligible to receive U.S. commodities, software, and technical data. To the maximum extent permitted by applicable law, Bourns disclaims (i) any and all liability for special, punitive, consequential, incidental or indirect damages or lost revenues or lost profits, and (ii) any and all implied warranties, including implied warranties of fitness for particular purpose, non-infringement and merchantability. For your convenience, copies of this Legal Disclaimer Notice with German, Spanish, Japanese, Traditional Chinese and Simplified Chinese bilingual versions are available at: Web Page: http://www.bourns.com/legal/disclaimers-terms-and-policies PDF: http://www.bourns.com/docs/Legal/disclaimer.pdf C1753 05/17/18R