Hyper Mini TOPLED(R) Hyper-Bright LED Lead (Pb) Free Product - RoHS Compliant LS M676, LA M676, LO M676, LY M676 Besondere Merkmale * Gehausetyp: weies SMT-Gehause, farbloser klarer Verguss * Besonderheit des Bauteils: kleine Bauform 2,3 mm x 1,3 mm x 1,4 mm * Wellenlange: 633 nm (super-rot), 615 nm (amber), 606 nm (orange), 587 nm (gelb) * Abstrahlwinkel: Lambertscher Strahler (120) * Technologie: InGaAlP * optischer Wirkungsgrad: 11 lm/W (gelb, orange, amber), 7 lm/W (super-rot) * Gruppierungsparameter: Lichtstarke, Wellenlange * Verarbeitungsmethode: fur alle SMT-Bestucktechniken geeignet * Lotmethode: Reflow Loten und Wellenloten (TTW) * Vorbehandlung: nach JEDEC Level 2 * Gurtung: 8 mm Gurt mit 3000/Rolle, o180 mm oder 12000/Rolle, o330 mm * ESD-Festigkeit: ESD-sicher bis 2 kV nach JESD22-A114-D * Erweiterte Korrosionsfestigkeit: Details siehe Seite 9 Features * package: white SMT package, colorless clear resin * feature of the device: small package 2.3 mm x 1.3 mm x 1.4 mm * wavelength: 633 nm (super-red), 615 nm (amber), 606 nm (orange), 587 nm (yellow) * viewing angle: Lambertian Emitter (120) * technology: InGaAlP * optical efficiency: 11 lm/W (yellow, orange, amber), 7 lm/W (super-red) * grouping parameter: luminous intensity, wavelength * assembly methods: suitable for all SMT assembly methods * soldering methods: reflow soldering and TTW soldering * preconditioning: acc. to JEDEC Level 2 * taping: 8 mm tape with 3000/reel, o180 mm or 12000/reel, o330 mm * ESD-withstand voltage: up to 2 kV acc. to JESD22-A114-D * Superior Corrosion Robustness: details see page 9 Anwendungen * Informationsanzeigen im Innenbereich * optischer Indikator * Einkopplung in Lichtleiter * Hinterleuchtung (LCD, Schalter, Tasten, Displays, Werbebeleuchtung, Allgemeinbeleuchtung) * Innenbeleuchtung im Automobilbereich (z.B. Instrumentenbeleuchtung, u.a.) Applications * indoor displays * optical indicators * coupling into light guides * backlighting (LCD, switches, keys, displays, illuminated advertising, general lighting) * interior automotive lighting. (e.g. dashboard backlighting, etc.) 2012-06-15 1 LS M676, LA M676, LO M676, LY M676 Bestellinformation Ordering Information Typ Emissionsfarbe Lichtstarke1) Seite 15 Lichtstrom2) Seite 15 Bestellnummer Type Color of Emission Luminous Intensity1) page 15 Luminous Flux2) page 15 IF = 20 mA IV (mcd) IF = 20 mA V (mlm) LS M676-P2R1-1 LS M676-Q2S1-1 LS M676-P2S1-1 super-red LA M676-Q2S1-1 LA M676-R2T1-1 LA M676-Q2T1-1 Ordering Code 56.0 ... 140.0 90.0 ... 224.0 56.0 ... 224.0 300 (typ.) 480 (typ.) 420 (typ.) Q65110A1897 Q65110A2363 Q65110A2364 amber 90.0 ... 224.0 140.0 ... 355.0 90.0 ... 355.0 480 (typ.) 760 (typ.) 660 (typ.) Q65110A2356 Q65110A2357 Q65110A2358 LO M676-Q2S1-24 LO M676-R2T1-24 LO M676-Q2T1-24 orange 90.0 ... 224.0 140.0 ... 355.0 90.0 ... 355.0 480 (typ.) 760 (typ.) 660 (typ.) Q65110A2359 Q65110A2360 Q65110A2361 LY M676-Q2S1-26 LY M676-R2T1-26 LY M676-Q2T1-26 yellow 90.0 ... 224.0 140.0 ... 355.0 90.0 ... 355.0 480 (typ.) 760 (typ.) 660 (typ.) Q65110A1898 Q65110A2366 Q65110A2367 Anm.: Die oben genannten Typbezeichnungen umfassen die bestellbaren Selektionen. Diese bestehen aus wenigen Helligkeitsgruppen (siehe Seite 5 fur nahere Informationen). Es wird nur eine einzige Helligkeitsgruppe pro Gurt geliefert. Z.B.: LO M676-Q2S1-24 bedeutet, dass auf dem Gurt nur eine der Helligkeitsgruppen Q2, R1, R2 oder S1 enthalten ist. Um die Liefersicherheit zu gewahrleisten, konnen einzelne Helligkeitsgruppen nicht bestellt werden. Gleiches gilt fur die Farben, bei denen Wellenlangengruppen gemessen und gruppiert werden. Pro Gurt wird nur eine Wellenlangengruppe geliefert. Z.B.: LO M676-Q2S1-24 bedeutet, dass auf dem Gurt nur eine der Wellenlangengruppen -2, -3, oder -4 enthalten ist (siehe Seite 5 fur nahere Information). Z.B.: LA M676-Q2S1-1 bedeutet, dass das Bauteil innerhalb der auf Seite 4 spezifizierten Grenzen geliefert wird. Um die Liefersicherheit zu gewahrleisten, konnen einzelne Wellenlangengruppen nicht bestellt werden. Note: The above Type Numbers represent the order groups which include only a few brightness groups (see page 5 for explanation). Only one group will be shipped on each reel (there will be no mixing of two groups on each reel). E.g. LO M676-Q2S1-24 means that only one group Q2, R1, R2 or S1 will be shippable for any one reel. In order to ensure availability, single brightness groups will not be orderable. In a similar manner for colors where wavelength groups are measured and binned, single wavelength groups will be shipped on any one reel. E.g. LO M676-Q2S1-24 means that only 1 wavelength group -2, -3, or -4 will be shippable (see page 5 for explanation). E.g. LA M676-Q2S1-1 means that the device will be shiped within the specified limits as stated on page 4. In order to ensure availability, single wavelength groups will not be orderable. 2012-06-15 2 LS M676, LA M676, LO M676, LY M676 Grenzwerte Maximum Ratings Bezeichnung Parameter Symbol Symbol Werte Values Einheit Unit LS, LO, LA LY Betriebstemperatur Operating temperature range Top - 40 ... + 100 C Lagertemperatur Storage temperature range Tstg - 40 ... + 100 C Sperrschichttemperatur Junction temperature Tj + 125 C Durchlassstrom Forward current (TA=25C) IF 30 mA Stostrom Surge current t 10 s, D = 0.005, TA=25C IFM Sperrspannung3) Seite 15 Reverse voltage3) page 15 (TA=25C) VR 12 V Leistungsaufnahme Power consumption (TA=25C) Ptot 80 mW Rth JA 580 K/W Rth JS 330 K/W Warmewiderstand Thermal resistance Sperrschicht/Umgebung4) Seite 15 Junction/ambient4) page 15 Sperrschicht/Lotpad Junction/solder point 2012-06-15 3 0.8 0.2 A LS M676, LA M676, LO M676, LY M676 Kennwerte Characteristics (TA = 25 C) Bezeichnung Parameter Wellenlange des emittierten Lichtes Wavelength at peak emission IF = 20 mA Symbol Symbol (typ.) Dominantwellenlange 5) Seite 15 Dominant wavelength5) page 15 IF = 20 mA Werte Values Einheit Unit LS LA LO LY peak 645 622 610 591 dom 633 6 615 6 -6/+3 -7/+8 nm 606* 587* nm Spektrale Bandbreite bei 50 % Irel max Spectral bandwidth at 50 % Irel max IF = 20 mA (typ.) 16 16 16 15 nm Abstrahlwinkel bei 50 % IV (Vollwinkel) Viewing angle at 50 % IV (typ.) 2 120 120 120 120 Grad deg. Durchlassspannung6) Seite 15 Forward voltage6) page 15 IF = 20 mA (min.) (typ.) (max.) VF VF VF 1.8 2.0 2.3 1.83 2.0 2.33 1.85 2.0 2.35 1.9 2.0 2.4 V V V Sperrstrom Reverse current VR = 12 V (typ.) (max.) IR IR 0.01 10 0.01 10 0.01 10 0.01 10 A A Temperaturkoeffizient von peak Temperature coefficient of peak IF = 20 mA; -10C T 100C (typ.) TCpeak 0.14 0.13 0.13 0.13 nm/K Temperaturkoeffizient von dom Temperature coefficient of dom IF = 20 mA; -10C T 100C (typ.) TCdom 0.05 0.06 0.07 0.10 nm/K Temperaturkoeffizient von VF Temperature coefficient of VF IF = 20 mA; -10C T 100C (typ.) TCV - 2.0 - 1.8 - 1.7 - 2.5 mV/K Optischer Wirkungsgrad Optical efficiency IF = 20 mA (typ.) opt 7 * Einzelgruppen siehe Seite 5 Individual groups on page 5 2012-06-15 4 11 11 11 lm/W LS M676, LA M676, LO M676, LY M676 Wellenlangengruppen (Dominantwellenlange)5) Seite 15 Wavelength Groups (Dominant Wavelength)5) page 15 Gruppe Group yellow orange Einheit Unit min. max. min. max. 2 580 583 600 603 nm 3 583 586 603 606 nm 4 586 589 606 609 nm 5 589 592 nm 6 592 595 nm Helligkeits-Gruppierungsschema Brightness Groups Helligkeitsgruppe Brightness Group Lichtstarke1) Seite 15 Luminous Intensity1) page 15 IV (mcd) P2 Q1 Q2 R1 R2 S1 S2 T1 56.0 ... 71.0 71.0 ... 90.0 90.0 ... 112.0 112.0 ... 140.0 140.0 ... 180.0 180.0 ... 224.0 224.0 ... 280.0 280.0 ... 355.0 Lichtstrom2) Seite 15 Luminous Flux2) page 15 V (mlm) 190 (typ.) 240 (typ.) 300 (typ.) 380 (typ.) 480 (typ.) 600 (typ.) 760 (typ.) 950 (typ.) Anm.: Die Standardlieferform von Serientypen beinhaltet entweder eine untere Familiengruppe, eine obere Familiengruppe oder eine Sammelgruppe, die aus nur 4 bzw. 6 Helligkeitsgruppen bestehen. Einzelne Helligkeitsgruppen sind nicht bestellbar. Note: The standard shipping format for serial types includes either a lower family group, an upper family group or a grouping of all individual groups of 4 or 6 individual brightness groups. Individual brightness groups cannot be ordered. Gruppenbezeichnung auf Etikett Group Name on Label Beispiel: R2-3 Example: R2-3 Helligkeitsgruppe Brightness Group Wellenlange Wavelength R2 3 Anm.: In einer Verpackungseinheit / Gurt ist immer nur eine Gruppe fur jede Selektion enthalten. Note: No packing unit / tape ever contains more than one group for each selection 2012-06-15 5 LS M676, LA M676, LO M676, LY M676 Relative spektrale Emission2) Seite 15 Relative Spectral Emission2) page 15 V() = spektrale Augenempfindlichkeit / Standard eye response curve Irel = f (); TA = 25 C; IF = 20 mA OHL00235 100 % Irel 80 V 60 yellow orange amber super-red 40 20 0 400 450 500 550 600 650 nm 700 Abstrahlcharakteristik2) Seite 15 Radiation Characteristic2) page 15 Irel = f (); TA = 25 C 40 30 20 10 0 50 OHL01660 1.0 0.8 0.6 60 0.4 70 0.2 80 0 90 100 1.0 2012-06-15 0.8 0.6 0.4 0 20 6 40 60 80 100 120 LS M676, LA M676, LO M676, LY M676 Durchlassstrom2) Seite 15 Forward Current2) page 15 IF = f (VF); TA = 25 C Relative Lichtstarke2) 7) Seite 15 Relative Luminous Intensity2) 7) page 15 IV/IV(20 mA) = f (IF); TA = 25 C OHL00232 10 2 mA 5 OHL10233 10 1 IV I V (20 mA) IF 10 0 10 1 5 10 -1 10 0 5 10 -1 super-red yellow orange/amber 1 1.4 1.8 2.2 2.6 10 -2 10 0 3 V 3.4 10 1 mA IF VF Relative Lichtstarke2) Seite 15 Relative Luminous Intensity2) page 15 IV/IV(25 C) = f (Tj); IF = 20 mA Maximal zulassiger Durchlassstrom Max. Permissible Forward Current I F = f (T ) IF OHL00238 IV 2.0 OHL00773 35 mA 10 2 IV (25 C) 30 TS 1.6 orange yellow amber super-red 25 TA 1.2 20 15 0.8 orange yellow amber super-red 10 0.4 5 0 TA temp. ambient TS temp. solder point 0 20 40 60 0 -20 80 C 100 20 40 60 C 100 Tj T 2012-06-15 0 7 LS M676, LA M676, LO M676, LY M676 Zulassige Impulsbelastbarkeit IF = f (tp) Permissible Pulse Handling Capability Duty cycle D = parameter, TA = 25 C LS, LA, LO IF Zulassige Impulsbelastbarkeit IF = f (tp) Permissible Pulse Handling Capability Duty cycle D = parameter, TA = 85 C LS, LA, LO OHL00318 100 A IF 5 5 D= 0.005 0.01 0.02 0.05 0.1 0.2 0.5 10-1 D= T IF T 0.005 0.01 0.02 0.05 0.1 0.2 0.5 10-1 tP IF T 10-2 -5 10 10-4 10-3 10-2 10-1 10 0 101 s 10 2 10-2 -5 10 10-4 10-3 10-2 10-1 10 0 101 s 10 2 tp tp Zulassige Impulsbelastbarkeit IF = f (tp) Permissible Pulse Handling Capability Duty cycle D = parameter, TA = 25 C LY 5 t D = TP 5 tP IF OHL01416 tP D= 5 100 A 100 A Zulassige Impulsbelastbarkeit IF = f (tp) Permissible Pulse Handling Capability Duty cycle D = parameter, TA = 85 C LY OHL00316 tP D= T tP IF IF 100 A 5 T OHL01417 t D = TP tP IF T D= 10-1 D= 0.005 0.01 0.02 0.05 0.1 0.2 0.5 10-1 5 5 10-2 -5 10 10-4 10-3 10-2 10-1 10 0 101 s 10 2 10-2 -5 10 10-4 10-3 10-2 10-1 10 0 101 s 10 2 tp 2012-06-15 0.005 0.01 0.02 0.05 0.1 0.2 0.5 tp 8 LS M676, LA M676, LO M676, LY M676 Mazeichnung8) Seite 15 Package Outlines8) page 15 0.15 (0.006) 0.8 (0.031) 0.05 (0.002) Cathode marking A 0.5 (0.020) 0.3 (0.012) 1.0 (0.039) 1.9 (0.075) 2.3 (0.091) 2.1 (0.083) 2.1 (0.083) 1.4 (0.055) 1.2 (0.047) 0.71 (0.028) Light emitting area typ. 1.5 (0.059) x 1.0 (0.039) C 1.5 (0.059) 1.3 (0.051) Cathode marking GPLY6928 Korrosionsfestigkeit besser als EN 60068-2-60 (method 4): mit erweitertem Korrosionstest: 40C / 90%rh / 15ppm H2S / 336h Corrosion robustness better than EN 60068-2-60 (method 4): with enhanced corrosion test: 40C / 90%rh / 15ppm H2S / 336h Kathodenkennung: Cathode mark: Gewicht / Approx. weight: abgeschragte Ecke bevelled edge 7 mg Gurtung / Polaritat und Lage8) Seite 15 Verpackungseinheit 3000/Rolle, o180 mm oder 12000/Rolle, o330 mm Packing unit 3000/reel, o180 mm or 12000/reel, o330 mm Method of Taping / Polarity and Orientation8) page 15 4 (0.157) Cathode/Collector Side 2 (0.079) 1.55 (0.061) 4 (0.157) 2012-06-15 2.35 (0.093) 8 (0.315) 1.75 (0.069) 3.5 (0.138) 1.5 (0.059) OHAY0225 9 LS M676, LA M676, LO M676, LY M676 Empfohlenes Lotpaddesign8) 9) Seite 15 Recommended Solder Pad8) 9) page 15 Reflow Loten Reflow Soldering 0.8 (0.031) 1 (0.039) 2.8 (0.110) 2.8 (0.110) 1 (0.039) 0.8 (0.031) Padgeometrie fur verbesserte Warmeableitung Paddesign for improved heat dissipation Cu-Flache > 16 mm 2 Cu-area > 16 mm 2 Lotstopplack Solder resist 2012-06-15 OHLPY978 10 LS M676, LA M676, LO M676, LY M676 Lotbedingungen Soldering Conditions Reflow Lotprofil fur bleifreies Loten Reflow Soldering Profile for lead free soldering Vorbehandlung nach JEDEC Level 2 Preconditioning acc. to JEDEC Level 2 (nach J-STD-020D.01) (acc. to J-STD-020D.01) OHA04525 300 C T 250 Tp 245 C 240 C tP 217 C 200 tL 150 tS 100 50 25 C 0 0 50 100 150 200 250 s 300 t OHA04612 Profil-Charakteristik Profile Feature Symbol Symbol Pb-Free (SnAgCu) Assembly Minimum Ramp-up Rate to Preheat*) 25 C to 150 C Time tS TSmin to TSmax tS 60 Ramp-up Rate to Peak*) TSmax to TP Recommendation Maximum 2 3 100 120 2 3 Einheit Unit K/s s K/s Liquidus Temperature TL 217 Time above Liquidus temperature tL 80 100 s Peak Temperature TP 245 260 C Time within 5 C of the specified peak temperature TP - 5 K tP 20 30 s 3 6 K/s 10 Ramp-down Rate* TP to 100 C 480 Time 25 C to TP All temperatures refer to the center of the package, measured on the top of the component * slope calculation DT/Dt: Dt max. 5 s; fulfillment for the whole T-range 2012-06-15 C 11 s LS M676, LA M676, LO M676, LY M676 Barcode-Produkt-Etikett (BPL) Barcode-Product-Label (BPL) OSRAM Opto BIN1: XX-XX-X-XXX-X LX XXXX Semiconductors RoHS Compliant (6P) BATCH NO: 1234567890 ML Temp ST 2 260 C R (1T) LOT NO: 1234567890 (9D) D/C: 1234 Pack: R18 DEMY 022 B_R999_1880.1642 R (X) PROD NO: 123456789(Q)QTY: 9999 (G) GROUP: XX-XX-X-X OHA04563 Gurtverpackung Tape and Reel W1 D0 P0 A N F W E 13.0 0.25 P2 Label P1 Direction of unreeling Direction of unreeling W2 Gurtvorlauf: 400 mm Leader: 400 mm Gurtende: Trailer: 160 mm 160 mm OHAY0324 Tape dimensions in mm (inch) W 8 + 0.3 - 0.1 P0 P1 P2 D0 E F 4 0.1 4 0.1 2 0.05 1.5 + 0.1 1.75 0.1 3.5 0.05 (0.157 0.004) (0.157 0.004) (0.079 0.002) (0.059 + 0.004) (0.069 0.004) (0.138 0.002) Reel dimensions in mm (inch) A W Nmin W1 W2 max 180 (7) 8 (0.315) 60 (2.362) 8.4 + 2 (0.331 + 0.079) 14.4 (0.567) 330 (13) 8 (0.315) 60 (2.362) 8.4 + 2 (0.331 + 0.079) 14.4 (0.567) 2012-06-15 12 LS M676, LA M676, LO M676, LY M676 Trockenverpackung und Materialien Dry Packing Process and Materials Moisture-sensitive label or print Barcode label L VE el LE . see lab e H) nk, (R bla cod y If bar . dit RH mi % hu e ve /60 ed ag C ati rar ck rel 30 _ inf pa < % to ak of 90 urs d ). < ns (pe or urs d , Ho de cte itio Ho urs an bje ing C co 72 nd Ho urs 5 te C su ss 48 e Ho co ce 24 6 da e y 40 be tim C h l pro < tor tim e e or ). 23 tim at t wilnt l wit or fac C Flo s tim at or ca at re. Flo d tha ale el or nth nti Flo uiv du if: rea es l 4 5 Flo lab mo ide ce eq low g, l ve vic 5a is be de tin en 24 de , or pro ve l 6 Le e te co , g: un wh Le ve l ke r se da ba ed low ure Le ve mo % ba e ba al d Le ist urere en ref e e 10 tim for se ale op se for > se , Mo ististu ure 3 is or . , is ha se Mo be nk ist nk rd g -03 Mo in Flo r-p RH g, bla Mo ba TD po If bla hin % kin Ca life s (if ar t. s wit ar 10 ba tor J-S thi, va p. elf Ye ek _ < e icat me , C 1 urs Ye er tem ted Sh at ed low uir > 1 WeHo un Aft Indno uir DE 1. e 4 8 ref dy red reqy is 2. bo e Mo /JE tim 16 dit2b req : a) tim e e Sto es or mi IPC ed or g is tim vic b) e Hu en Flo oror tim De 2a kin nc te Flo op a) or 3. b) baere Flo da e l 1 2 Flo If al ref tim ve l 2a 4. se d ve l 3 Le g an ve l Le Ba te ure Le ve Le ist ure Da ist ure Mo ure Mo istist Mo Mo N RS ins VE ITI TO nta NSUC TIO U g EcoSEND CO Ais ba UR MI CThIST SE MO TO OP M RA OS Humidity indicator Barcode label Please check the HIC immidiately after bag opening. Discard if circles overrun. Avoid metal contact. Do not eat. Comparator check dot WET If wet, examine units, if necessary bake units 15% If wet, examine units, if necessary bake units 10% 5% If wet, parts still adequately dry. change desiccant Humidity Indicator MIL-I-8835 AM OS R Desiccant OHA00539 Anm.: Feuchteempfindliche Produkte sind verpackt in einem Trockenbeutel zusammen mit einem Trockenmittel und einer Feuchteindikatorkarte Bezuglich Trockenverpackung finden Sie weitere Hinweise im Internet und in unserem Short Form Catalog im Kapitel "Gurtung und Verpackung" unter dem Punkt "Trockenverpackung". Hier sind Normenbezuge, unter anderem ein Auszug der JEDEC-Norm, enthalten. Note: Moisture-sensitve product is packed in a dry bag containing desiccant and a humidity card. Regarding dry pack you will find further information in the internet and in the Short Form Catalog in chapter "Tape and Reel" under the topic "Dry Pack". Here you will also find the normative references like JEDEC. Kartonverpackung und Materialien Transportation Packing and Materials Barcode label MY DE R 18 -1 -1 +Q P OU P: GR T6 LE 76 P M ul LS ti Y TO 44 01 C: D/ (9 D) O TC BA P) (6 T LO (1 T) NO : OD PR (X ) M Y DE 18 R +Q P -1 GR OU P: (G ) u L lt S iT Y O T67 P L 6 01 998 D/ C: 21 (9 D) 00 M RA OS TY : 20 )Q (Q 5 R ic O S em 34 : 12 (X ) PR OD NO : (1 T) 11 00 LO T 14 2 NO (6 P) S 3G BA TC H H 12 NO : A 21 00 on M du O p ct to or s 44 M -1 E Bi D Bi n1 Bi n2 : Pn3 : Q- 1: 1- 20 M 20 2 L Te 2a 22 m 3 24 0 p ST Ad 26 0 C R 0 C R0 dit ion C R PA 77 al RT CK TE VA XT R: MO TO OP Muster 5 14 2 110 0 20 00 : 998 34 21 2100 (Q )Q TY : % /60 C 3G e S S em R ic AM on du O p ct to or H NO s . RH dit mi H 12 el see . lab e H) nk, (R bla cod y bar NO : 12 If hu ive d re ag _ < s s ur ). Ho ururs s de Ho co 72 Ho ur te 48 e Ho 24 6 da tim e e th tim or 23 tim e at t wi nt or l wi fac C Flo tim s at or e. ca ale at Flo or ur el nth tha nti Flo uiv if: read es ed l 4 5 Flo lab mo ide eq low g, oc ve l vic is de be 24 de or tin en l 5a6 pr Le ve e te co , w, g: un wh ve l e Le ke r se da ur e ba ed flo Le ve mo % ba e ba al d e Le ist ur en re e 10 e tim ur e se for ale op se for > , Mo istist ur se is or . , 33 is ha se Mo nk be ist nk rd g -0 Mo in n Flo RH g, r-p bla Mo ba Ca TD po If blathi % kin t. life s (if ar wi 10 ba tor J-S thi va p. elf Ye ar ks s _ < me 1 Ye ee ur d, C ire icat Sh ter w, tem ted at > 1 W Ho un Af flody qu Indno ire DE 1. e 4 8 re ed re y is qu JE 2. bo Mo or tim e e 16 re C/ : es dit2b a) St tim or mi ed or g is IP tim e vic b) Hu Flo oror en tim De 2a kin ce te Flo a) op or 3. b) ba en Flo da e fer l 1 Flo If al re tim ve l 2 4. se d l 2a3 Le ve g an ve l e Le Ba te ur Le ve Le ist ure e Da ur e Mo istist ur Mo ist Mo Mo (G ) Muster L VE LE lat ra ck re 30 N s VE RS inf pa % k of ainITI TO to 90 ea d ntNSUC < ns (p or TIO d , cteg itio U g coSEND an bje C sin nd 5 C su es CO Ais baRE co y 40 be oc TU MI CThIS C pr < ll tor SE ). D Bin1 Bi Bi n2 : Pn3 : Q- 1ML : 1- 20 20 2 Te 2a 22 mp 3 24 0 ST Ad 26 0 C R 0 C R0 dit ion C R PA 77 al RT CK TE VA XT R: Barcode label Packing Sealing label 2012-06-15 13 OHA02044 LS M676, LA M676, LO M676, LY M676 Revision History: 2012-06-15 Previous Version: 2012-04-20 Page Subjects (changes since last revision) Date of change 1, 9 additional information 2009-12-07 9 correction of weight 2010-09-22 11 OS-IN-2012-005 2012-04-20 9 OS-IN-2012-017 2012-06-15 Attention please! The information describes the type of component and shall not be considered as assured characteristics. Terms of delivery and rights to change design reserved. Due to technical requirements components may contain dangerous substances. For information on the types in question please contact our Sales Organization. If printed or downloaded, please find the latest version in the Internet. Packing Please use the recycling operators known to you. We can also help you - get in touch with your nearest sales office. By agreement we will take packing material back, if it is sorted. You must bear the costs of transport. For packing material that is returned to us unsorted or which we are not obliged to accept, we shall have to invoice you for any costs incurred. Components used in life-support devices or systems must be expressly authorized for such purpose! Critical components 10 page 15) may only be used in life-support devices or systems 11) page 15 with the express written approval of OSRAM OS. 2012-06-15 14 LS M676, LA M676, LO M676, LY M676 Funoten: 1) Helligkeitswerte werden mit einer Stromeinpragedauer von 25 ms und einer Genauigkeit von 11% ermittelt. 2) Wegen der besonderen Prozessbedingungen bei der Herstellung von LED konnen typische oder abgeleitete technische Parameter nur aufgrund statistischer Werte wiedergegeben werden. Diese stimmen nicht notwendigerweise mit den Werten jedes einzelnen Produktes uberein, dessen Werte sich von typischen und abgeleiteten Werten oder typischen Kennlinien unterscheiden konnen. Falls erforderlich, z.B. aufgrund technischer Verbesserungen, werden diese typischen Werte ohne weitere Ankundigung geandert. 3) Die LED kann kurzzeitig in Sperrichtung betrieben werden. 4) RthJA ergibt sich bei Montage auf PC-Board FR 4 (Padgroe 5 mm 2 je Pad) 5) Wellenlangen werden mit einer Stromeinpragedauer von 25 ms und einer Genauigkeit von 1 nm ermittelt. 6) Spannungswerte werden mit einer Stromeinpragedauer von 1 ms und einer Genauigkeit von 0,1 V ermittelt. 7) Im gestrichelten Bereich der Kennlinien muss mit erhohten Helligkeitsunterschieden zwischen Leuchtdioden innerhalb einer Verpackungseinheit gerechnet werden 8) Mae werden wie folgt angegeben: mm (inch) 9) Gehause halt TTW-Lothitze aus 10) Ein kritisches Bauteil ist ein Bauteil, das in lebenserhaltenden Apparaten oder Systemen eingesetzt wird und dessen Defekt voraussichtlich zu einer Fehlfunktion dieses lebenserhaltenden Apparates oder Systems fuhren wird oder die Sicherheit oder Effektivitat dieses Apparates oder Systems beeintrachtigt. 11) Lebenserhaltende Apparate oder Systeme sind fur (a) die Implantierung in den menschlichen Korper oder (b) fur die Lebenserhaltung bestimmt. Falls sie versagen, kann davon ausgegangen werden, dass die Gesundheit und das Leben des Patienten in Gefahr ist. Remarks: 1) Brightness groups are tested at a current pulse duration of 25 ms and a tolerance of 11%. 2) 3) 4) 5) 6) 2012-06-15 7) In the range where the line of the graph is broken, you must expect higher brightness differences between single LEDs within one packing unit. 8) Dimensions are specified as follows: mm (inch) Package able to withstand TTW-soldering heat A critical component is a component used in a life-support device or system whose failure can reasonably be expected to cause the failure of that life-support device or system, or to affect its safety or the effectiveness of that device or system. 9) 10) 11) Published by OSRAM Opto Semiconductors GmbH Leibnizstrae 4, D-93055 Regensburg www.osram-os.com (c) All Rights Reserved. 15 Due to the special conditions of the manufacturing processes of LED, the typical data or calculated correlations of technical parameters can only reflect statistical figures. These do not necessarily correspond to the actual parameters of each single product, which could differ from the typical data and calculated correlations or the typical characteristic line. If requested, e.g. because of technical improvements, these typ. data will be changed without any further notice. Driving the LED in reverse direction is suitable for short term application. RthJA results from mounting on PC board FR 4 (pad size 5 mm 2 per pad) Wavelengths are tested at a current pulse duration of 25 ms and a tolerance of 1 nm. Forward voltages are tested at a current pulse duration of 1 ms and a tolerance of 0.1 V. Life support devices or systems are intended (a) to be implanted in the human body, or (b) to support and/or maintain and sustain human life. If they fail, it is reasonable to assume that the health and the life of the user may be endangered.