Low Frequency AT-cut Cylindrical Type Microprocessor Crystal AB310 Pb RoHS Compliant Moisture Sensitivity Level (MSL) - This product is Hermetically Sealed and not Moisture Sensitive - MSL = N/A: Not Applicable FEATURES: APPLICATIONS: * High stability by tight vacuum sealing * Miniature high frequency cylinder type crystal * Suitable for wide range of application * Clocks for microprocessor * Consumer electronics * Test equipment * Computer peripherals 10.5 x O3.2mm | | | | | | | | | | | | | | | STANDARD SPECIFICATIONS: Parameters Minimum Frequency Range Operation Mode Operating Temperature Storage Temperature Frequency Tolerance @+25C Frequency Stability over the Operating Temperature ( ref. to +25C) Equivalent series resistance (R1) Shunt capacitance (C0) 3.500 Typical Maximum ----AT-cut, Fundamental -10 -----40 -----30 ----- Units Notes 4.000 MHz +60 +85 +30 C C ppm See options See options -50 ----- +50 ppm --------- --------- 200 5 pF Load capacitance (CL) ----- 16 ----- pF Drive Level Aging@25C3C Insulation Resistance -----5 500 ------------- 100 +5 ----- W ppm M See options 16 and 18pF nominal CL (See options) First year @ 100Vdc 15V OPTIONS AND PART IDENTIFICATION: (Left blank if standard) AB310 - MHz - - - - Freq. Stability Blank: 50 ppm Q: 100 ppm Frequency in MHz Please specify the frequency in MHz. e.g. 14.31818MHz Load Capacitance (pF) Please specify CL in pF or S for series (10pF min.) Please contact Abracon for values under 10pF Custom ESR if other than STD R : Specify a value in (e.g.: R40) Operating Temp. Blank: -10C ~ +60C E: 0C ~ +70C B: -20C ~ +70C D*: -40C ~ +85C Freq. Tolerance Blank: 30 ppm 5: 50 ppm *Frequency stability 100 ppm (option Q) only Packaging = Bulk, 1000pcs/bag ABRACON IS ISO9001:2008 CERTIFIED Visit www.abracon.com for Terms & Conditions of Sale Revised: 02.20.13 30332 Esperanza, Rancho Santa Margarita, California 92688 tel 949-546-8000| fax 949-546-8001| www.abracon.com Low Frequency AT-cut Cylindrical Type Microprocessor Crystal AB310 Pb RoHS Compliant 10.5 x O3.2mm | | | | | | | | | | | | | | | OUTLINE DIMENSION: 3.2 max. (1.1) 10.5Min (0.32) 10.5max. Dimensions: inches (mm) ATTENTION: Abracon Corporation's products are COTS - Commercial-Off-The-Shelf products; suitable for Commercial, Industrial and, where designated, Automotive Applications. Abracon's products are not specifically designed for Military, Aviation, Aerospace, Life-dependant Medical applications or any application requiring high reliability where component failure could result in loss of life and/or property. For applications requiring high reliability and/or presenting an extreme operating environment, written consent and authorization from Abracon Corporation is required. Please contact Abracon Corporation for more information. ABRACON IS ISO9001:2008 CERTIFIED Visit www.abracon.com for Terms & Conditions of Sale Revised: 02.20.13 30332 Esperanza, Rancho Santa Margarita, California 92688 tel 949-546-8000| fax 949-546-8001| www.abracon.com