AMB8420 www.amber-wireless.de Compact Low-Cost Radio Module 868 MHz ISM Band Key Features Low-cost OEM radio module in 868 MHz ISM band Compact dimensions: 16 x 27.5 x 3.5 mm Supports low-power applications and WOR (wake-on radio) Integrated software stack with extensive functions Flexible addressing with up to 255 nodes in 255 networks Complies with requirements in EU RED 2014/53/EU Can be delivered in tape and reel Integrated ceramic antenna, optional: RF pin Network Topologies Description The AMB8420 is a compact and low-cost radio data transmission module for wireless half-duplex communication. The integrated microprocessor controls data communication, handling packet and checksum formation, addressing and resending unreceived packets. The host system does not have to perform any radio-specific tasks. Point-to-point The module can be configured in many ways and supports data transfer with fast channel and address switching. Measured field strength (RSSI value) offers the option of enhancing quality of the radio link. The GUI for the freely available Windows application AMBER-ACC makes it easy to set operating parameters. The AMB8420 is constructed on an SMD design and suitable for automatic component mounting. It can also be delivered in tape and reel packaging. The AMB2520 and AMB4420 provide pin-compatible modules for the frequency ranges 2.4 GHz and 433 MHz. AMBER wireless also offers customer-specific solutions based on the AMB8420. Interfaces Point-to-Multipoint The AMB8420 is connected to a host system via the UART interface with bit rates of up to 115.2 kbaud. Other pins can be used for data flow control and to switch between operating modes. An SPI interface can be implemented upon request (separate firmware). Using appropriate firmware, the module is also suitable for autonomously recording digital or analogue signals. Range of Application Data collection, monitoring, remote control and sensor networks. Its compact dimensions and low power consumption make the radio module ideal for battery-powered devices. Peer-to-Peer AMB8420 www.amber-wireless.de Dimensions Pin Assignment Pad Name Description VCC Positive supply voltage GND Negative supply voltage ANTENNA Antenna connection (optional) UTXD, URXD UART transmit , UART receive /RTS Ready to send/receive /DATA_INDICATE Signals incoming data /DATA_REQUEST Starts transmitting SLEEP, TRX_DISABLE Selection of low-power mode /CONFIG Change into command-mode /RESET* Reset-Input Specifications Performance General RF technology Conformity Range* up to 400 m (integrated antenna) up to 1000 m (external antenna) RF data rate up to 100 kbps UART data rate up to 115.2 kBaud Output power typ. 2 dBm e.r.p (10 dBm at 50 ) RF sensitivity down to -100 dBm (@4.8kbps, radiated), down to -108 dBm (@4.8kbps, 50 ) Power supply 2.7 - 3.6 V Power consumption TX: typ. 45 mA RX: typ. 20 mA Low Power: typ. 6 A Dimensions 16.0 x 27.5 x 3.5 mm Operating temperature -30 to +85 C Weight <2g Antenna integrated ceramic-antenna RF pin (optional) Addressing up to 255 nodes on 255 networks Frequency range 863.0 - 868.6 MHz Channel spacing 50 kHz Modulation 2-FSK, MSK Supported topologies Point-to-Point, Point-to-Multipoint, Peer-to-Peer Europe EN 300220, EN 301489, EN 60950, EN 50371 * Range stated is calculated assuming line-of-sight. Actual range will vary based upon specific board integration, antenna selection, and environment. Related Products AMB8420-EV AMB8465 AMB2520 2017 AMBER wireless GmbH AMB8420 DS V4_10 Ordering information Item no. Description AMB8420 868 MHz RF module with integrated ceramic-antenna AMB8420-TR on Tape & Reel, Reflow solderable, packing unit 400pcs AMB8420-2 868 MHz RF module with RF pin AMB8420-2-TR on Tape & Reel, Reflow solderable, packing unit 400pcs AMBER wireless GmbH Phone +49.651.993.550 Email info@amber-wireless.de Internet www.amber-wireless.de AMBER wireless GmbH assumes that the statements made in this data sheet are correct at the time of issue. AMBER wireless GmbH reserves the right to make changes to technical specifications or product functions without prior notice. AMBER wireless GmbH does not assume any responsibility for the use of the described products, neither does it convey any license under its patent rights. All trademarks, registered trademarks and product names are the property of their owners. .