LUCKY LIGHT Features High intensity 10mm diameter package Wide viewing angle General purpose leads Reliable and rugged Package Dimension: Part NO. Lens Color Source Color LL-1003GD2D-001 Green Diffused Green Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is 0.25(.010")mm unless otherwise noted. 3. Protruded resin under flange is 1.0mm(.04") max 4. Lead spacing is measured where the leads emerge from the package. 5. Specifications are subject to change without notice Part No. LL-1003GD2D-001 Spec No. S/N-01051408D S/N-01051408D Page 2 of 4 LUCKY LIGHT Absolute Maximum Ratings at Ta=25 Parameter MAX. Unit Power Dissipation 100 mW Peak Forward Current (1/10 Duty Cycle, 0.1ms Pulse Width) 100 mA Continuous Forward Current 50 mA Derating Linear From 50 0.4 mA/ Reverse Voltage 5 V Operating Temperature Range -40 to +80 Storage Temperature Range -40 to +80 Lead Soldering Temperature [4mm(.157") From Body] 260 for 5 Seconds Electrical Optical Characteristics at Ta=25 Parameter Symbol Min. Typ. Max. Unit Test Condition Iv --- 12 --- mcd IF=20mA (Note 1) 21/2 --- 60 --- Deg (Note 2) Peak Emission Wavelength p 560 564 570 nm IF=20mA Dominant Wavelength d 566 571 576 nm IF=20mA (Note 3) Spectral Line Half-Width --- 29 --- nm IF=20mA Forward Voltage VF 1.7 2.2 2.8 V IF=20mA Reverse Current IR --- --- 100 A VR=5V Luminous Intensity Viewing Angle Note: 1.Luminous intensity is measured with a light sensor and filter combination that approximates the CIE eye-response curve. 2.1/2 is the off-axis angle at which the luminous intensity is half the axial luminous intensity. 3.The dominant wavelength (d) is derived from the CIE chromaticity diagram and represents the single wavelength which defines the color of the device. Part No. LL-1003GD2D-001 Spec No. S/N-01051408D S/N-01051408D Page 3 of 4 LUCKY LIGHT Typical Electrical/Optical Characteristics Curves (25 (25 Ambient Temperature Unless Otherwise Noted) Spectral Radiance (Peak @ 564nm) 1.0 Normalized Response 0.8 0.6 0.4 0.2 0.0 380 400 420 440 460 480 500 520 540 560 580 600 620 640 660 680 700 720 740 760 780 Wave Length(nm) Forward Current vs Forward Voltage Forward Current IF(mA) 50 40 30 20 10 0 1.5 1.7 1.9 2.1 2.3 2.5 2.7 2.9 Forward Voltage VF(V) Relative Luminous Intensity vs Forward Current Relative Intensity (LOP@20mA=1) 3 2.5 2 1.5 1 0.5 0 0 10 20 30 40 50 Forward Current IF(mA) 0.8 0.6 0.4 0.2 0.2 0.4 0.6 0.8 1.0 Relative Intensity (LOP @ MAX=1) Part No. LL-1003GD2D-001 Spec No. S/N-01051408D S/N-01051408D Page 4 of 4