®Stripes of Quality
5
www.antenna.com
ASP-915 Series
Replacement conversion
antenna for ASP-910 and
ASP-912 Series. No mount
or cable. Fits A/S low
profile male-female
contact mount. See table
for frequency ranges.
ASP-910 Series
Complete 3/4 inch
hole mount antenna
including 17 ft (5.2 m)
cable and connector.
ASP-912 Series
Quick Grip® trunk
lid mount antenna
including 17 ft (5.2 m)
cable and connector.
ASP-911 Series
Adjustable angle
(up to 15°), 7/8 - 15/16
inch hole mount
antenna with integral
N female connector.
Cable (K-301
through K-304)
available separately.
ASPG918 & ASPG919
7/8 - 15/16 inch hole
mount antennas with
integral N female
connector. No spring or
angle adjustment. Cable
(K-301 through K-304)
available separately.
Attractive  all-black DURA-COAT appearance complements
new vehicle styling
High Performance  elevated-feed-point design provides
omnidirectional coverage when off-roof mounting is necessary
Versatile  ground-plane-independent design allows installation
wherever necessary . . . convertibles, special mounts, even
temporary fixed applications
Problem Solver  corrects coverage problems caused by
misapplication of rooftop antennas
Models
ASP-910ASP-911ASP-912ASP-915
ASPG918ASPG919
Elevated-Feed-Point
High Tech, 3 dB Gain Antennas
Antenna
Mounting
Options
Specifications
Electrical
Power 40 watts
10 watts (ASPG918, ASPG919)
Gain 3 dBd (5 dBi)
4.2 dBd (ASPG919)
Frequency Range 806-869 MHz (ASPA & ASPSA prefix)
890-960 MHz (ASPG prefix)
902-960 MHz (ASPG918)
VSWR 1.9:1
Impedance 50 ohms
Mechanical
Whip Material One-piece stainless steel collinear with black
DURA-COAT finish. Mounting this series
of antennas in a location where it may be
struck below the stainless steel whip is not
recommended
Antenna Length Approx. 24 inches (61 cm)
Spring Material Stainless steel, black DURA-COAT
Base and Fittings Positive male-female contact with stainless
steel, plated steel, aluminum or brass parts
Cable 17 ft (5.2 m) PRO-FLEX PLUS
(where supplied - see table below)
Connector See table (crimp tool required for most connectors)
TRUNKING MOBILE ANTENNAS
Available Model Configurations
Mount & Cable
Connector
Mini-UHF Male N Male TNC Male
3/4 inch ASPA910N ASPA910T
Hole Mount ASPG910T
Angle Adjustable ASPSA911
ASPG911
"Quick Grip" No Hole ASPSA912M ASPSA912T
Trunk Lid Mount ASPRG912T
Conversion ASPA915
Antenna ASPG915
Fixed Station ASPG919
ASPG918
No
Connector
or Cable