ASPI-0310FS
ELECTRICAL SPECIFICATIONS:
RoHS
Compliant
FEATURES: APPLICATIONS:
• Mobile phones
• MP3 & 4 and other portable communication equipment
• Digital cameras.
3.0 x 3.0 x 1.0mm
Pb
ABRACON IS
ISO9001:2008
CERTIFIED
OPTIONS AND PART IDENTIFICATION
ULTRA LOW PROFILE SHIELDED SMD CHIP POWER INDUCTOR
Abracon P/N: ASPI-0310FS Series
Operating Temperature & Humidity :
Storage Temperature & Humidity:
• Small size and low profile: 1.0mm
• Small DCR and high rated current
• High reliability to mechanical stress
• Magnetically shielded by magnetic powder molding
• Suitable for RoHS reflow profile
Part Number Inductance Inductance
Tolerance DCR DCR
Tolerance
Saturation
Current
Temperature
Rise Current
Units μH % mΩ % A A
Symbol L M, N DCR Isat Irms
ASPI-0310FS-1R0 1.0 N 50 ±25% 2.30 2.30
01.2 09.1 26 N 2.1 2R1-SF0130-IPSA
ASPI-0310FS-1R5 1.5 N 70 ±30% 1.65 2.00
09.1 54.1 08 M 2.2 2R2-SF0130-IPSA
08.1 50.1 031 M 3.3 3R3-SF0130-IPSA
07.1 58.0 571 M 7.4 7R4-SF0130-IPSA
03.1 07.0 062 M 8.6 8R6-SF0130-IPSA
09.0 06.0 053 M 0.01 001-SF0130-IPSA
08.0 05.0 015 M 0.51 051-SF0130-IPSA
07.0 04.0 087 M 0.22 022-SF0130-IPSA
05.0 23.0 0011 M 0.33 033-SF0130-IPSA
ASPI-0310FS-470 47.0 M 1600
±20%
0.28 0.35
Test Conditions
1. Inductance is measured in HP-4285A Precision LCR Meter.
2. RDC is measured in DU-5011 milli ohm meter.(or equivalent).
3. Isat : Based on inductance change ( L/Lo : ≤ -30%)
4. Irms : Based on temperature rise ( T : 40oC TYP. )
5. Test Freq: 100KHz, 1Vrms
-25°C to +120°C (Including self generated heat)
-10°C to +40°C, 30% to 70% RH
*M for L = 2.2 ~ 47µH
ASPI-3010FS- -
*N for L = 1.0 ~ 1.5µH
Inductance Code
Please refer to the
Electrical Spec Table
Packaging
T2: Tape and Reel (2kpcs / reel)
Tolerance
N: ±30%*
M: ±20%*
LLC
2 Faraday, Suite# B
|
Irvine
|
CA 92618
Revised: 02.23.16
Ph. 949.546.8000
|
Fax. 949.546.8001
Visit www.abracon.com for Terms and Conditions of Sale
OUTLINE DRAWING:
ASPI-0310FS
RoHS
Compliant
3.0 x 3.0 x 1.0mm
Pb
ABRACON IS
ISO9001:2008
CERTIFIED
ULTRA LOW PROFILE SHIELDED SMD CHIP POWER INDUCTOR
Mechanical and Material Information 1 (Effective date: 11/10/2011)
Circuit Schematic Recommended Land Pattern
No Polarity
Dimension: mm
Materials
No Part Name Material
1 Ferrite core Ni-Zn Ferrite
2 Terminals Ag/Ni/Sn
3 Coil Cu/P180 Grd 1
Adhesive Silicon Base Resin
4 Magnetic Powder Ni-Zn Ferrite
A B C Max.
3.0±0.1 3.0±0.1 1.0
LLC
2 Faraday, Suite# B
|
Irvine
|
CA 92618
Revised: 02.23.16
Ph. 949.546.8000
|
Fax. 949.546.8001
Visit www.abracon.com for Terms and Conditions of Sale
REFLOW PROFILE:
TAPE & REEL:
Dimension: mm
ASPI-0310FS
RoHS
Compliant
3.0 x 3.0 x 1.0mm
Pb
ABRACON IS
ISO9001:2008
CERTIFIED
ULTRA LOW PROFILE SHIELDED SMD CHIP POWER INDUCTOR
T2: 2,000pcs / reel
A 3.15
B 3.15
K 1.40
F 4
T 0.25
ATTENTION: Abracon Corporation’s products are COTS – Commercial-Off-The-Shelf products; suitable for Commercial, Industrial and, where designated, Automotive
Applications. Abracon’s products are not specifically designed for Military, Aviation, Aerospace, Life-dependant Medical applications or any application requiring high reliability
where component failure could result in loss of life and/or property. For applications requiring high reliability and/or presenting an extreme operating environment, written
consent and authorization from Abracon Corporation is required. Please contact Abracon Corporation for more information.
LLC
2 Faraday, Suite# B
|
Irvine
|
CA 92618
Revised: 02.23.16
Ph. 949.546.8000
|
Fax. 949.546.8001
Visit www.abracon.com for Terms and Conditions of Sale
