Connector Accessories 290-011 and 290-012 Stainless Steel Molding Adapters To select the appropriate molding adapter, consider the following basic suggestions to ensure a high integrity, quality molded termination: * * Select a molding adapter which will provide adequate inside working room to accept the termination envelope, especially if there are shield terminations, splices, etc. If the termination is to be molded with neoprene or other material using a transfer molding process, select the molding adapter cable entry diameter close to the outside diameter of the cable or termination envelope. FIXED ENTRY VARIABLE ENTRY Tightening & Staking Indentations 1.28 (32.5) Max O-ring A Thread .60 (15.2) A Thread B C D E 290WS011-18 TABLE I B DIA MAX .855 (21.7) .965 (24.5) 1.090 (27.7) 1.220 (31.0) 1.370 (34.8) 1.525 (38.7) 1.655 (42.0) 1.775 (45.1) 290WS012-18 12 Shell Size (Table II) Entry Size (Table III) Metric dimensions (mm) are indicated in parentheses. C DIA .430 (10.9) .535 (13.6) .660 (16.8) .785 (19.9) .880 (22.4) 1.005 (25.5) 1.130 (28.7) 1.255 (31.9) TABLE II SHELL E DIA MAX A THREAD SIZE MAX ENTRY CLASS 2B 10 5/8 - 24 UNEF .855 (21.7) 10 12 3/4 - 20 UNEF .965 (24.5) 12 14 7/8 - 20 UNEF 1.090 (27.7) 14 16 1 - 20 UNEF 1.220 (31.0) 16 18 1 1/8 - 16 UN 1.370 (34.8) 18 20 1 1/4 - 16 UN 1.525 (38.7) 20 22 1 3/8 - 16 UN 1.655 (42.0) 22 24 1 1/2 - 16 UN 1.775 (45.1) 24 (c) 2003 Glenair, Inc. G Basic Part No. Prior to use, lubricate O-rings with high grade silicone lubricant (Moly- Shell Size (Table I) kote M55 or equivalent). A THREAD CLASS 2B 5/8 - 24 UNEF 3/4 - 20 UNEF 7/8 - 20 UNEF 1 - 20 UNEF 1 1/8 - 16 UN 1 1/4 - 16 UN 1 3/8 - 16 UN 1 1/2 - 16 UN F Tightening & Staking Indentations Basic Part No. SHELL SIZE 10 12 14 16 18 20 22 24 2.00 (50.8) Max .60 O-ring (15.2) D DIA .670 (17.0) .780 (19.8) .905 (23.0) 1.020 (25.9) 1.135 (28.8) 1.250 (31.8) 1.383 (35.1) 1.510 (38.4) REPLACEMENT O-RING PART NUMBERS * SHELL PISTON SIZE O-RING 10 2-014 2-016 12 2-018 14 2-020 16 2-022 18 20 2-024 22 2-026 24 2-028 * Parker o-ring part numbers. Compound N674-70 or equivalent. TABLE III ENTRY G F NO. DIA DIA 10 .670 (17.0) .430 (10.9) 12 .780 (19.8) .535 (13.6) 14 .905 (23.0) .660 (16.8) 16 .785 (19.9) 1.020 (25.9) 18 .880 (22.4) 1.135 (28.8) 20 1.005 (25.5) 1.250 (31.8) 22 1.130 (28.7) 1.383 (35.1) 24 1.255 (31.9) 1.510 (38.4) CAGE Code 06324 TORQUE VALUES ENTRY TORQUE NO. 5 IN. LBS. 80 10 100 12 120 14 16 120 140 18 140 20 140 22 24 150 Printed in U.S.A. GLENAIR, INC. * 1211 AIR WAY * GLENDALE, CA 91201-2497 * 818-247-6000 * FAX 818-500-9912 www.glenair.com E-Mail: sales@glenair.com 42