PMK130 1 3 0 Wa t t O p e n Frame and U-Channel Power Supplies with PFC series 130 Watts Output Power Triple Outputs Universal 90-264VAC Input 4242VDC Input to Output Isolation Active Power Factor Correction 3" x 5" x 1.4" Model Number Output V1/V2/V3 Output I1/I2/I3 max. Ripple & Noise Efficiency(min/nom) Capacitive Load TRIPLE OUTPUT PMK130T-A (U)(-A) PMK130T-B (U)(-A) PMK130T-C (U)(-A) PMK130T-D (U)(-A) 5/12/-12 VDC 5/15/-15 VDC 5/24/12 VDC 12/24/5 VDC 15/5/1 Amps 15/5/1 Amps 4/4/2 Amps 8/2/3 Amps 75% / 80% 75% / 80% 75% / 80% 75% / 80% 100/120/120mV pk-pk 100/150/150mV pk-pk 100/240/120mV pk-pk 120/240/100mV pk-pk 25,000uF 25,000uF 25,000uF 15,000uF Note: 1. The PMK130 Series is offered in an optional U-Channel Chassis as well as with optional 3.96mm pitch 5 and 10 Pin Input and Output connectors (open frame construction and screw terminals are standard respectively). Simply add a "U" at the end of the Model Number to recieve the U-Channel configuration or a "-A" to receive the pins, or both if both are desired. For example: The Model Number "PMK130T-AU-A" represents a triple output (5/12/-12VDC) U-Channel supply with 3.96 pitched pins (5 Input; 10 Output) . See the Mechanical Dimensions on pages 3 through 8 in this specification 2. PMMK130T-A and all "U" options are not covered by UL Certification unless provided with more than 10 CFM forced air cooling applied 6-10cm above T1. 3. Derating curves acceptable up tp 40C for UL certified products All specifications are typical at nominal input, full load, and 25C unless otherwise noted * These are stress ratings. Exposure of the devices to any of these conditions may adversely affect long term reliability. Proper operation under conditions other than the standard operating conditions is neither warranteed nor implied. WWW.ASTRODYNE.COM Astrodyne products are not authorized or warranteed for use as critical components in life support systems, equipment used in hazardous environments, nuclear controls systems, or other mission-critical applications. ASTRODYNE USA: 1-800-823-8082 ASTRODYNE PACIFIC: 886-2-26983458 1 3 0 Wa t t O p e n Frame and U-Channel Power Supplies with PFC EMS INPUT SPECIFICATIONS Input Voltage Range Frequency Range Inrush Current, typ: Input Current Power Factor (cold start) Leakage Current 90-264VAC 47 - 63 Hz 60A @ 230VAC Input * 2.3~0.8A (90-264VAC) PF > 0.96 @ 230VAC <3.5mA @ 264VAC, 50Hz OUTPUT SPECIFICATIONS Voltage and Current Minimum Load Maximum Output Power Preset Accuracy (Note 6) Line Regulation (Note 5) Load Regulation Ripple/Noise (Notes 1,2,7) Turn On Hold Up Time / Rise Time Short Circuit Protection Over Voltage Protection Over Current Protection Transient Response Over Shoot/Under Shoot See Selection Chart 0.1A /10% of Max. load/ 0A 130 Watts 1% 0.5% nom / 1% max V1: 7% (20% to Full Load) V2: 11% (10% Load) V2: 3% (0A) See Selection Chart <4S, typ. 20mS, typ. / 30mS, typ. Auto recovery * 130% max., Auto recovery * 150% max., Auto recovery * 10mS <10% of Nominal O/P VDC GENERAL SPECIFICATIONS Safety Classification: Isolation (Note 3) Insulation Resistance EMI Efficiency UL/cUL60950-1, TUV: EN60950-1 CE: EN60601-1, EN60601-1:2001 CB: IEC60950-1 Class 1, 3-Pin (L, N FG) 4242VDC I/P - O/P * 2828 VDC I/P - GND * 707VDC O/P - GND * 20M (500VDC, 1S I/P-O/P) CISPR EN55022 class B See Selection Chart ENVIRONMENTAL SPECIFICATIONS Oper. Temperature (Note 4) Storage Temperature Relative Humidity Harmonics: Fluctuations: ESD: RS: EFT: Surge: CS: Dips: MTBF Vibration Drop Test PMK130 series IEC61000-3-2 Class D IEC61000-3-3 IEC61000-4-2, 6KV Contact, 8KV Air IEC61000-4-3 FR: 80MHz-2.5GHz Field Strength: 3V/M IEC61000-4-4 2KV on AC Line IEC61000-4-5 1KV (L-L); 2KV (L, N-PE) IEC61000-4-6 3V (EMF) IEC61000-4-11 95% 250CY, 70% 25CY, 40% 5CY, 5% 0.5CY 197,000 Hrs Singles 175,700 Triples to MIL-HDBK-217F 4G Pk, 50~500Hz, 3 Axes, 30 min* Test Height 70cm * PHYSICAL SPECIFICATIONS Size Open Frame: U-Channel: Weight Open Frame: U-Channel: 76.2 x 127 x 33mm (3" x 5" x 1.4") 127 x 80.5 x 38mm (5" x 3.17" x 1.50") 10.25 oz (291g) 13.38 oz (380g) NOTES: 1. All measurements should be made directly at the terminals of the power supply. 2. Ripple and Noise depend upon output voltage a specified per particular model. 3. Isolation for up to 1min duration. 4. Specified for free-air convection cooling. 5. Line regulation measured from 90 - 264VAC/100VAC minimum required for full load start. 6. Preset accuracy measured at nominal load, 120VAC input. 7. O/P oise measured directly at pins/terminals @ nominal load, 0uF by pass and 47uF electrolytic, pk-pk@ 20MHz bandwidth. Special EMC Notice: The end application shall provide an earth ground connection for conducted & radiated emission performance. Astrodyne is not liable for the end application without extra earth connection to PMK130S Open Frame Power Supply. -10C to +70C (See Derate Curve) -25C to +85C 10 to +90%, non-cond * WWW.ASTRODYNE.COM ASTRODYNE USA: 1-800-823-8082 ASTRODYNE PACIFIC: 886-2-26983458 1 3 0 Wa t t O p e n Frame and U-Channel Power Supplies with PFC PMK130 series MECHANICAL DIMENSIONS Open Frame (PMK130T-xx) 5.00in 127mm 4.55in 115.6mm .20in 5mm .22in 5.7mm .14in 4_ 3.5mm Vo3 Vo2 3.00in 76.2mm COM 2.61in 66.2mm GND COM Vo1 ACN Vo1 ACL 1.3in 33mm .10in 2.5mm Input connector : 3P / 8.25mm pitch TERMINAL BLOCK Output connector : 6P / 8.25mm pitch TERMINAL BLOCK Output Vo1 Model +5V A +5V B C +5V +12V D WWW.ASTRODYNE.COM .06in 1.6mm Vo2 Vo3 +12V -12V +15V -15V +24V +12V +24V +5V ASTRODYNE USA: 1-800-823-8082 ASTRODYNE PACIFIC: 886-2-26983458 1 3 0 Wa t t O p e n Frame and U-Channel Power Supplies with PFC PMK130 series MECHANICAL DIMENSIONS M3 hole size WWW.ASTRODYNE.COM ASTRODYNE USA: 1-800-823-8082 ASTRODYNE PACIFIC: 886-2-26983458 1 3 0 Wa t t O p e n Frame and U-Channel Power Supplies with PFC PMK130 series MECHANICAL DIMENSIONS - FAN PLACEMENT RECOMMENDATION WWW.ASTRODYNE.COM ASTRODYNE USA: 1-800-823-8082 ASTRODYNE PACIFIC: 886-2-26983458 1 3 0 Wa t t O p e n Frame and U-Channel Power Supplies with PFC PMK130 series MECHANICAL DIMENSIONS Open Frame (PMK130T-xx-A) 5.00in 127mm 4.55in 115.6mm .20in 5mm .22in 5.7mm .14in 4_ 3.5mm 3.00in 76.2mm Vo3 Vo2 COM COM COM COM COM Vo1 Vo1 Vo1 2.61in 66.2mm FG ACN ACL 1.3in 33mm .10in 2.5mm Input connector : 5P / 3.96mm pitch MOLEX 41791-0005 Output connector : 10P / 3.96mm pitch MOLEX 41791-0010 Output Vo1 Model +5V A +5V B C +5V +12V D WWW.ASTRODYNE.COM .06in 1.6mm Vo2 Vo3 +12V -12V +15V -15V +24V +12V +24V +5V ASTRODYNE USA: 1-800-823-8082 ASTRODYNE PACIFIC: 886-2-26983458 1 3 0 Wa t t O p e n Frame and U-Channel Power Supplies with PFC PMK130 series MECHANICAL DIMENSIONS M3 hole size WWW.ASTRODYNE.COM ASTRODYNE USA: 1-800-823-8082 ASTRODYNE PACIFIC: 886-2-26983458 1 3 0 Wa t t O p e n Frame and U-Channel Power Supplies with PFC PMK130 series MECHANICAL DIMENSIONS - FAN PLACEMENT RECOMMENDATION WWW.ASTRODYNE.COM ASTRODYNE USA: 1-800-823-8082 ASTRODYNE PACIFIC: 886-2-26983458 1 3 0 Wa t t O p e n Frame and U-Channel Power Supplies with PFC PMK130 series DERATE CURVES WWW.ASTRODYNE.COM ASTRODYNE USA: 1-800-823-8082 ASTRODYNE PACIFIC: 886-2-26983458 1 3 0 Wa t t O p e n Frame and U-Channel Power Supplies with PFC PMK130 series DERATE CURVES WWW.ASTRODYNE.COM ASTRODYNE USA: 1-800-823-8082 ASTRODYNE PACIFIC: 886-2-26983458 1 3 0 Wa t t O p e n Frame and U-Channel Power Supplies with PFC PMK130 series REGULATION PMK130T-A-A Regulaon - Load on Output 1 Varied, Output 2 load 10%, Output 3 load = 0 16 14 12 Output Voltage, V 10 8 6 4 2 0 0.00 2.00 4.00 6.00 8.00 10.00 12.00 14.00 Iout 1 Load, Amps Output 1 WWW.ASTRODYNE.COM Output 2 Output 3 ASTRODYNE USA: 1-800-823-8082 ASTRODYNE PACIFIC: 886-2-26983458