10 | 9 8 7 6 | 5 | 4 3 2 19317 0220.38 d2+.015 g d1 REF a l OT t REF J B+0.50 14 iS B+.020 xm E+1.00M mn I inc F +039 MATERIAL WIRE RANGE A B ai 2D E L t ae NO. MCM mm2 , 50.0 36.0 95 8.4 27.0 66.0 32 42 oo 193171008 | 250-300 | 117-152 1.97 1.42 0.77 0.33 1.06 2.60 0.13 L+.079 to3t7400 | 250-300 | 117-152 POP ao, PEE azo |B a7 [Meo Pio. [Se se0 Po ors se3171012 | 250-300 | 117-152 Plas, PSE aie |B oa ene Pete [ee x60 Po os 193174027 SHOWN 50.0 36.0 195 15.0 27.0 66.0 32 193171014 | 250-300 | 117-152 197 7.42 0.77 6.59 1.06 2.60 0.13 to3171016 | 250-300 | 117-152 POP as7 PP aae |S or7 | wer Pte PO ze60 | oa 63.0 36.0 195 10.5 27.0 B1.0 32 193171110 | 250-300 | 117-152 2.48 7.42 6.77 0.33 7.06 3.19 6.13 63.0 36.0 195 13.0 27.0 81.0 32 NOTES: 193171112 | 250-300 | 117-152 2.48 1.42 0.77 6.51 7.06 3.19 6.13 ; 63.0 36.0 195 17.0 27.0 81.0 3.2 ; eeopucr ie Role COMPLIANT 19317116 | 250-300 | 117-152 9.48 742 6.77 6.67 7.06 3.19 6.13 rean71018 | 250-300 | 17-152 [630-7 360 [195 19.0 27.0 B10 82 3. TERMINAL MARKED AS SHOWN So : 0 - 05 - <0 0 S10 5 - 193171020 | 250-300 | 117-152 3.48 | 142 | 6.77 |. 0.83 | 06 | 19 | 13 63.0 36.0 195 23.0 27.0 81.0 3.2 193171022 | 250-300 | 117-152 248 742 0.77 0.91 706 519 6.13 63.0 36.0 195 25.0 27.0 81.0 3.2 193171024 | 250-300 | 17-152 Z48 442 6.77 6.98 7.06 519 6.13 63.0 36.0 195 28.0 27.0 81.0 3.2 193171027 | 250-300 | 117-152 248 442 0.77 7:10 7.06 519 6.13 a S = QUALITY GENERAL TOLERANCES DIMENSION STYLE SCALE DESIGN UNITS THIRD ANGLE =) =6&}) |symao_s| (UNLESS SPECIFIED) MM/IN 1:2 METRIC |OC] PROJECTION < 2s mm INCH __| DRAWN BY DATE _|TITLE Re SiZN-0 ZPLACES|IE---_[z-- MODELL 2009/02/18 SL_SERIES ee F 3 PLACESE--- |---~ [CHECKED BY DATE RING TYPE CONNECTORS Bex =|8/\/-0 Pcaces|t=-- [+=-- RDEROSS 2009/02/18 250-600MCM FS= 2 1 PLACE |t-- |t--- APPROVED BY DATE aif = ANGULAR ===*RDEROSS 2009/02/18 rKaldx MOLEX INCORPORATED oO S 3 oa e MATERIAL NO. DOCUMENT NO. SHEET NO. Oozze DRAFT WHERE APPLICABLE] SEE TABLE SD-19317-001 1 OF 4 SW GS el WITH. Deets SIZE] THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX H ff INCORPORATED AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION Rev. 2 2008/04/15 | 9 8 7 6 | 5 | 4 | 3 | 2 | 110 9 | 8 7 6 | 5 4 3 2 19317 go #0.38 d22.015 \ | T d1 REF | t [_______1 I @ | VED ti ww N B +.020 ~ t TTT TTT I I \Z E +100 E+.039 @ mm Inc A+1.00 MATERIAL WIRE _RANGE A B die d2o E L t A+t.039 NO. MCM mm2 =o 193172008 | 300-350 | 152-193 P2235 Poe ace Po oes [Po was ete [are Poo t, 53.0 38.5 21.0 105 285 69.0 35 193172010 | 300-350 | 152-193 2.09 4.52 0.83 0.41 4.12 2.72 0.14 53.0 38.5 21.0 13.0 28.5 69.0 35 493174027 SHOWN 193172012 | 300-350 | 152-193 2.09 152 0.83 0.51 4.12 2.72 0.14 19317201 | 300-350 | 152-193 P2250, P8S.co RIO a [BO [285 [09.0 BS 193172016 | 300-350 | 152-193 P2509 Poe aea | oes | 067 [ete (a2 Fo oe @ 19317202 | 300-350 | 152-193 OSE, Pease Be wes [Peo Pete PS Poon 193172018 | 300-350 | 152-193 |>-5%6 Poo sea | oes [Poors [ete Pe sae Po on 193172020| 300-350 | 152-193 |! 566 Pose | os [03 | te [a2 | SEE NOTES ON SHEET 1 193172022| 300-350 | 152-193 [7 >s%6 Poe see | oes Poo ete Pe sa2 Poe 193172024 | 300-350 | 152-193 |! 566 Poo sea | oa [098 | te [Sa | 193172027 | 300-350 | 152-193 [7 >see Poe sea [oes Pete [ete Besa Poon QO S = QUALITY] GENERAL TOLERANCES DIMENSION STYLE SCALE DESIGN UNITS THIRD ANGLE H = &] |sympois| (UNLESS SPECIFIED) MM/IN 1:2 METRIC | Cl eROvECTION << ec 2 DRAWN BY DATE TITLE Ss Ss mm INCH mo Rz\W-0 GPcAcesie---__[z--- MODELL 2009/02/18 SL_SERIES y a 3 PLACES|--- [+--- [CHECKED By DATE RING TYPE CONNECTORS GS =I8/\7-0 PLAces|t=-- _[+=-- RDEROSS 2009/02/18 250-600MCM FSS 24 1PLACE [--- |t-- APPROVED BY DATE off = ANGULAR ===*RDEROSS 2009/02/18 rKaldx MOLEX INCORPORATED ge S 3 oa e MATERIAL NO. DOCUMENT NO. SHEET NO. Cue tn DRAFT WHERE APPLICABLE] SEE TABLE SD-19317-001 2 OF 4 HH ) <t > WITH. Deets SIZE THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX H w B INCORPORATED AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION tb_frame_B_P_AM_T 9 8 7 | 6 | 5 | 4 | 3 | 2 | 1 Rev. E 2006/04/1510 | 9 8 | 7 6 | 5 4 3 2 19317 giz +0.38 22.015 (\ | T @d1 REF t | SER f+ =@ ww ; Pup ff B+0.50 t REF Ne B+.020 ~ pod I | L Hh E 1.00 mm. F 2.039 inch MATERIAL WIRE RANGE A B d1e d2o E L t A+1.00 NO. MCM mm A 2.039 : ooo 493173008 | 350-450 | 193-242 PE2s50 |Pazs [eos Po oss Pian [2a [oe tZ. 2.079 193173010 | 350-450 | 193-242 PE>350 [a7 [toe [Soa ae (aes Poe 493173012 | 350-450 | 193-242 PE2s50 |Pazs [Po oss (Poo Pease [eas [oe 193174027 SHOWN 193173014 | 350-450 | 193-242 PE2550 [Paz [Peas [Pose ies [ses [oa 56.0 44.0 24.0 17.0 315 72.0 4.0 193173016 | 350-450 pene 2.20 4,73 0.94 0.67 4.24 2.83 0.16 69.0 44.0 24.0 13.0 315 1.0 4.0 19317312 | 350-450 193-2655 2.72 1.73 0.94 0.51 4.2 3.58 0.16 soxi7ait6 | 350-450 | 193-249-1022 ee ed ens en 193173018 | 350-450 | 193-242 [P2-s5, |oaas Poo, [Poors Pian [Pace [oo 193173020 | 350-450 | 193-242 | -572 Mo ags [oases (oes | tae [Sse [ote SEE NOTES ON SHEET 1 193173022| 350-450 | 193-2462 [82o50 |oaas (oo, (eae Pian Pace [oo 493173024 | 350-450 | 193-242 [P2a59 |oaas (Poo, [2098 ioe Pais [6 193173027| 350-450 | 193-242 22-570 [Mags Peo, Pea Pe aas Pose | or a S = QUALITY GENERAL TOLERANCES DIMENSION STYLE SCALE DESIGN UNITS THIRD ANGLE H = &) |sympors| (UNLESS SPECIFIED) MM/IN 1:2 METRIC | Cl PROvECTION < 2s mm INCH __| DRAWN BY DATE _|TITLE aek R]ZIW-0 TPACES-[z- MODELL 2009/02/18 SL_SERIES a f 3 PLACES|---__[+--- _ | HECKED BY DATE RING TYPE CONNECTORS eSs ay \W/=0 [ZPLACES|t=-- _[+==- RDEROSS 2009/02/18 250-600MCM SN S wW 4 PLACE J--- +--- APPROVED BY DATE 5 2 Ps * ANGULAR =~ ENO roo woe NCORPORATES S26 . . SHEET NO. Cues DRAFT WHERE APPLICABLE] SEE TABLE SD-19317-001 3 OF 4 HH ) <t > WITH. Deets SIZE THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX H |g INCORPORATED AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION tb_frame_B_P_AM_T 9 8 7 | 6 | 5 | 4 | 3 | 2 | 1 Rev. E 2006/04/1510 | 9 8 6 | 5 4 3 2 19317 0220.38 d2+015 \ t { 1 | | d1 REF t p-------4 | @ YER NS t REF - US B+0.50 no B+.020 ~ | rere | | | L | E+1,00 EF +.039 mm Ax100 MATERIAL WIRE_RANGE A B dio d2e E L 7 A+,039 NO. cM L 22.00 193174008 | 500-600 | 245-325 [552 PO>to9 [aio Po was [tao sae | or L+.079 193174010 | 500-600 | 245-325 [552 Poe as5 [aio [Poa [tao Pace | or 193174027 SHOWN 193174012 | 500-600 | 245-325 |-57 Poe toe [Ste [Soom Piao Pesce or 193174014 | 500-600 | 245-325 [572 Pots [tio [Poss [tao Psa [or 193174016 | 500-600 | 245-325 [552 PO? ao9 [Seat [Vo wer [tao [sa | Or 193174112 | 500-600 | 245-325 Posi PoP tos [Ee aio [eos eta [Sais [or 193174116 | 500-600 | 245-325 Psa, POP ao5 [oat [Vo wer [eta [aie | or 805 505 28.0 19.0 35.5 105.2 [43 SEE NOTES ON SHEET 1 193174016 | 500-600 | 245-325 3.17 1.99 1.10 0.75 1.40 4.16 0.17 193174020| 500-600 | 245-325 [O>sa, Poe ao9 [eae Pe oes (eta [re Fon 193174022| 500-600 | 245-325 [Psa Poe tos [aio eae [tao [aie [or 193174024 | 500-600 | 245-325 [PO>-sa7 Poe tos [Scio (oo o98 | tao [a6 [oar 193174027 | 500-600 | 245-325 Psa Poets [aio Peete tao [ais [or Q S = QUALITY GENERAL TOLERANCES DIMENSION STYLE SCALE DESIGN UNITS THIRD ANGLE H = &) |sympots| (UNLESS SPECIFIED) MM/IN 1:2 METRIC | Cl eRoJECTION < 2s mm INCH __| DRAWN BY DATE _|TITLE eek R)ZW-0 TPAceS-[z- MODELL 2009/02/18 SL_SERIES oy a 3 PLACES|+--- [+-=- [CHECKED BY DATE RING TYPE CONNECTORS oS x =|8/\/-0 [2 PLACES|+--- _[+--- RDEROSS 2009/02/18 250-600MCM N= Z wW 4 PLACE J--- +--- APPROVED BY DATE off = ANGULAR ===*RDEROSS 2009/02/18 rKaldx MOLEX INCORPORATED g S 3 oa e MATERIAL NO. DOCUMENT NO. SHEET NO. Coe=e DRAFT WHERE APPLICABLE] SEE TABLE SD-19317-001 4 OF 4 HOt =e > WITH. Deets SIZE) THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX He INCORPORATED AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION tb_frame_B_P_AM_| 9 8 | 6 | 5 | 4 | 3 | 2 | 1 Rev. E 2006/04/15