Mimix Broadband, Inc., 10795 Rockley Rd., Houston, Texas 77099
Tel: 281.988.4600 Fax: 281.988.4615 mimixbroadband.com
Characteristic Data and Specifications are subject to change without notice. ©2007 Mimix Broadband, Inc.
Export of this item may require appropriate export licensing from the U.S. Government. In purchasing these parts, U.S. Domestic customers accept
their obligation to be compliant with U.S. Export Laws.
January 2007 - Rev 15-Jan-07
0.25-3.0 GHz
High Dynamic Range Amplifier
Page 1 of 10
Features
Circuit Description
Functional Block Diagram
CMM6004-SC
0.25 to 3.0 GHz Frequency Range
41 dBm Output IP3
2.1 dB Noise Figure
14.5 dB Gain
23.5 dBm P1dB
SOT-89 SMT Package
Single Power Supply
+3V to +5V Voltage Rail
The CMM6004-SC is a high dynamic range amplifier designed
for applications operating within the 0.25 to 3.0 GHz
frequency range. It is an ideal solution for transmit and receive
functions where high linearity is required. The amplifier has
the flexibility of being optimized for a number of wireless
applications. The combination of low NF and high IP3 at the
same bias point make it an ideal transmit or receive solution
when used in applications including cellular and PCS (personal
communications service) operating from 0.8 to 2.2 GHz; MMDS
(multichannel multipoint distribution systems) operating from
2.2 to 2.7 GHz; and WLAN (wireless LAN) operating at 2.4 GHz.
The CMM6004-SC is packaged in a low-cost, space efficient,
surface mount SOT-89 package which provides excellent
electrical stability and low thermal resistance. All devices are
100% RF and DC tested.
Input Ground Output
Bias
Ground
123
4
Supply Voltage
RF Input Power*
Storage Temperature (Tstg)
Junction Temperature
Operating Temperature
Thermal Resistance
+6.0 V
+20 dBm
-55 ºC to +125 ºC
150 ºC
-40 ºC to +85ºC
52 ºC/W
Absolute Maximum Ratings
Operation of this device above any of these parameters may cause damage.
*Operation with more than 10 dBm of input power may cause 2 dB
degradation in OIP3 performance.
Parameter Condition Min Typ Max Units
Frequency Range 0.25 3.0 GHz
Gain Externally matched 13.5 14.5 dB
Input Return Loss Externally matched -10 dB
Output IP3 +38 +41 dBm
Noise Figure 2.1 dB
Output P1dB 23 dBm
Operating Current Range 120 150 180 mA
Supply Voltage 5.0 V
Unless otherwise specified, the following specifications are guaranteed at room
temperature in a Mimix fixture.
Notes:
1. T = 25ºC, Vdd = 5.0, Frequency = 800 MHz, 50 Ohm system
2. OIP3 measured with two tones at output power of 5 dBm/tone separated by 10 MHz.
Electrical Characteristics (T=25ºC)
Frequency Range 900 1900 2400 MHz
Gain 16.5 14.5 13.6 dB
Input Return Loss -18 -15 -15 dB
Output Return Loss -14 -10 -12 dB
Output IP3 +41.5 +41.0 +41.0 dBm
Output P1dB 23.8 23.5 23.0 dBm
Noise Figure 1.8 2.2 2.3 dB
1. Typical values reflect performance in recommended application circuit.
Typical Parameters
Parameter Typical Units
0.25-3.0 GHz
High Dynamic Range Amplifier
Page 2 of 10
Typical Performance
CMM6004-SC
Mimix Broadband, Inc., 10795 Rockley Rd., Houston, Texas 77099
Tel: 281.988.4600 Fax: 281.988.4615 mimixbroadband.com
Characteristic Data and Specifications are subject to change without notice. ©2007 Mimix Broadband, Inc.
Export of this item may require appropriate export licensing from the U.S. Government. In purchasing these parts, U.S. Domestic customers accept
their obligation to be compliant with U.S. Export Laws.
January 2007 - Rev 15-Jan-07
0.25-3.0 GHz
High Dynamic Range Amplifier
Page 3 of 10
Application Circuit - 900 MHz
CMM6004-SC
Typical Performance (50 Ohm System)
Ref Designator Value Description Size
C1, C2 56 pF MCH185A560JK 0603
L1 12 nH TOKO LL1608-F12NK 0603
L2 47 nH TOKO LL1608-F47NK 0603
S-Parameters vs Frequency
20
10
0
-10
-20
-300.1 1.1 2.1 3.0
Frequency, GHz
Magnitude, dB
S21
S11
S22
Frequency 900 MHz
Gain 16.5 dB
Input Return Loss -18.0 dB
Output Return Loss -14.0 dB
OIP3 41.0 dBm
Noise Figure 1.8 dB
Drain Current Id = 173 mA
P1dB 23.8 dBm
5V
900 MHz
16.2 dB
-19.0 dB
-16.0 dB
38.0 dBm
1.8 dB
Id = 173 mA
18.5 dBm
3.3V
uuuu
L1
12 nH
RF
IN
CMM6004-SC
SOT-89
T = 80 mil
INPUT MATCHING
NETWORK
RF
OUT
uuuu
C2
56 pF
L2
47 nH
Vcc
5V
C1
56 pF
T = 70 mil T = 500 mil
MIMIX
Mimix Broadband, Inc., 10795 Rockley Rd., Houston, Texas 77099
Tel: 281.988.4600 Fax: 281.988.4615 mimixbroadband.com
Characteristic Data and Specifications are subject to change without notice. ©2007 Mimix Broadband, Inc.
Export of this item may require appropriate export licensing from the U.S. Government. In purchasing these parts, U.S. Domestic customers accept
their obligation to be compliant with U.S. Export Laws.
January 2007 - Rev 15-Jan-07
0.25-3.0 GHz
High Dynamic Range Amplifier
Page 4 of 10
Typical Performance Over Voltage
CMM6004-SC
CMM6004-SC Evaluation board @ 900MHz
S21 Over Voltage
0
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
0 0.2 0.4 0.6 0.8 1 1.2 1.4 1.6 1.8 2 2.2 2.4 2.6 2.8 3
Freq (GHz)
S21 (dB)
4V
3V
2V
CMM6004-SC Evaluation board @ 900MHz
S11 Over Voltage
-30
-20
-10
0
10
20
30
0 0.2 0.4 0.6 0.8 1 1.2 1.4 1.6 1.8 2 2.2 2.4 2.6 2.8 3
Freq (GHz)
S11 (dB)
4V
3V
2V
CMM6004-SC Evaluation board @ 900MHz
S22 Over Voltage
-30
-25
-20
-15
-10
-5
0
5
10
15
20
0 0.2 0.4 0.6 0.8 1 1.2 1.4 1.6 1.8 2 2.2 2.4 2.6 2.8 3
Freq (GHz)
S22 (dB)
4V
3V
2V
CCMM6004-SC Evaluation board @ 900MHz
P1dB Over Voltage
12
14
16
18
20
22
24
26
1.5 2 2.5 3 3.5 4 4.5 5 5.5
Voltage (V)
Power (dBm)
CCMM6004-SC Evaluation board @ 900MHz
OIP3 Over Voltage
20.0
22.0
24.0
26.0
28.0
30.0
32.0
34.0
36.0
38.0
40.0
42.0
44.0
46.0
48.0
50.0
1.5 2 2.5 3 3.5 4 4.5 5 5.5
Voltage (V)
OIP3 (dBm)
Mimix Broadband, Inc., 10795 Rockley Rd., Houston, Texas 77099
Tel: 281.988.4600 Fax: 281.988.4615 mimixbroadband.com
Characteristic Data and Specifications are subject to change without notice. ©2007 Mimix Broadband, Inc.
Export of this item may require appropriate export licensing from the U.S. Government. In purchasing these parts, U.S. Domestic customers accept
their obligation to be compliant with U.S. Export Laws.
January 2007 - Rev 15-Jan-07
0.25-3.0 GHz
High Dynamic Range Amplifier
Page 5 of 10
Distribution Charts @ 3.3V
CMM6004-SC
Idss @ 3.3V Gain @ 3.3V
P1dB @ 3.3V OIP3 @ 3.3V
Note: Sample size is 250 samples taken from 3 different wafer lots.
Mimix Broadband, Inc., 10795 Rockley Rd., Houston, Texas 77099
Tel: 281.988.4600 Fax: 281.988.4615 mimixbroadband.com
Characteristic Data and Specifications are subject to change without notice. ©2007 Mimix Broadband, Inc.
Export of this item may require appropriate export licensing from the U.S. Government. In purchasing these parts, U.S. Domestic customers accept
their obligation to be compliant with U.S. Export Laws.
January 2007 - Rev 15-Jan-07
0.25-3.0 GHz
High Dynamic Range Amplifier
Page 6 of 10
Application Circuit - 1900 MHz
CMM6004-SC
Typical Performance (50 Ohm System)
Frequency 1900 MHz
Gain 14.5 dB
Input Return Loss -15 dB
Output Return Loss -10 dB
OIP3 41.0 dBm
Noise Figure 2.2 dB
Bias Vds = 5V, Id = 174 mA
P1dB 23.5 dBm
20
10
0
-10
-20
-30 0 0.5 1.0 1.5 2.0 2.5 3.0
Frequency, GHz
Magnitude, dB
S-Parameters vs Frequency
S21
S11
S22
RF
OUT
uuuu
uuuu
C3
56 pF
L3
47 nH
Vcc
5V
C2
56 pF
L2
6.8 nH
RF
IN
CMM6004-SC
SOT-89
T = 70 mil
INPUT MATCHING
NETWORK
C1
2.2 pF
T = 70 mil
uuuu
L1
2.7 nH
T = 80 mil T = 80 mil T = 500 mil
Ref Designator Value Description Size
C1 2.2 pF KOA 2.2pF 50V CER 0603
CAP 0603 NPO ±.25pF
C2, C3 56 pF MCH185A560JK 0603
L1 2.7 nH TOKO LL1608-F2N7S 0603
L2 6.8 nH TOKO LL1608-F6N8K 0603
L3 47 nH TOKO LL1608-F47NK 0603
MIMIX
Mimix Broadband, Inc., 10795 Rockley Rd., Houston, Texas 77099
Tel: 281.988.4600 Fax: 281.988.4615 mimixbroadband.com
Characteristic Data and Specifications are subject to change without notice. ©2007 Mimix Broadband, Inc.
Export of this item may require appropriate export licensing from the U.S. Government. In purchasing these parts, U.S. Domestic customers accept
their obligation to be compliant with U.S. Export Laws.
January 2007 - Rev 15-Jan-07
0.25-3.0 GHz
High Dynamic Range Amplifier
Page 7 of 10
Application Circuit - 2400 MHz
CMM6004-SC
Typical Performance (50 Ohm System)
Frequency 2400 MHz
Gain 13.6 dB
Input Return Loss -15 dB
Output Return Loss -12 dB
OIP3 41.0 dBm
Noise Figure 2.3 dB
Bias Vds = 5V, Id = 175 mA
P1dB 23.0 dBm
20
10
0
-10
-20
-30 0 0.5 1.0 1.5 2.0 2.5 3.0
Frequency, GHz
Magnitude, dB
S21
S11
S22
S-Parameters vs Frequency
RF
OUT
uuuu
uuuu
C3
56 pF
L3
47 nH
Vcc
5V
C2
56 pF
L2
6.8 nH
RF
IN
CMM6004-SC
SOT-89
T = 70 mil
INPUT MATCHING
NETWORK
C1
1.2 pF
T = 70 mil
uuuu
L1
2.2 nH
T = 80 mil T = 80 mil T = 500 mil
Ref Designator Value Description Size
C1 1.2 pF PHYC 1.2pF 50V CER 0603
CAP 0603 NPO ±.25pF
C2, C3 56 pF MCH185A560JK 0603
L1 2.2 nH TOKO LL1608-F2N2S 0603
L2 6.8 nH TOKO LL1608-F6N8K 0603
L3 47 nH TOKO LL1608-F47NK 0603
MIMIX
Mimix Broadband, Inc., 10795 Rockley Rd., Houston, Texas 77099
Tel: 281.988.4600 Fax: 281.988.4615 mimixbroadband.com
Characteristic Data and Specifications are subject to change without notice. ©2007 Mimix Broadband, Inc.
Export of this item may require appropriate export licensing from the U.S. Government. In purchasing these parts, U.S. Domestic customers accept
their obligation to be compliant with U.S. Export Laws.
January 2007 - Rev 15-Jan-07
0.25-3.0 GHz
High Dynamic Range Amplifier
Page 8 of 10
Typical Scattering Parameters
CMM6004-SC
(Vds = +5V, Ids = 150 mA, T = 22ºC, unmatched device in a 50 ohm system)
Frequency S11 S21 S12 S22
(MHz) (Mag) (Ang) (Mag) (Ang) (Mag) (Ang) (Mag) (Ang)
300 0.337 -47.270 7.379 157.500 0.066 -3.397 0.067 -164.10
400 0.349 -58.240 7.259 151.400 0.066 -6.123 0.064 -173.50
500 0.363 -68.990 7.127 145.300 0.066 -8.429 0.062 -179.70
600 0.379 -79.290 6.986 139.300 0.066 -10.740 0.060 -173.90
700 0.396 -89.000 6.829 133.300 0.065 -12.900 0.059 -169.10
800 0.413 -98.120 6.666 127.400 0.065 -14.990 0.057 -165.00
900 0.430 -106.700 6.502 121.600 0.065 -16.990 0.055 -161.60
1000 0.447 -114.700 6.330 115.900 0.065 -18.970 0.053 -158.60
1100 0.467 -122.400 6.162 110.300 0.065 -20.840 0.052 -155.50
1200 0.475 -129.600 5.991 104.900 0.065 -22.900 0.049 -152.50
1300 0.490 -136.500 5.820 99.610 0.065 -24.660 0.047 -150.10
1400 0.502 -143.100 5.655 94.400 0.065 -26.510 0.046 -147.00
1500 0.513 -149.400 5.494 89.350 0.064 -28.490 0.044 -144.30
1600 0.524 -155.500 5.339 84.370 0.064 -30.130 0.042 -141.50
1700 0.534 -161.400 5.189 79.490 0.064 -32.120 0.041 -138.80
1800 0.543 -167.100 5.045 74.690 0.064 -34.010 0.040 -136.00
1900 0.551 -172.60 4.906 69.960 0.064 -35.800 0.039 -133.00
2000 0.559 -178.000 4.775 65.320 0.064 -37.620 0.038 -130.00
2100 0.565 176.800 4.647 60.730 0.064 -39.550 0.037 -127.20
2200 0.571 171.500 4.523 56.180 0.064 -41.370 0.037 -124.10
2300 0.577 166.400 4.402 51.720 0.064 -43.200 0.036 -119.80
2400 0.582 161.400 4.289 47.320 0.064 -45.090 0.035 -116.00
2500 0.588 156.500 4.183 42.960 0.064 -46.900 0.036 -111.50
2600 0.539 151.600 4.081 38.610 0.065 -48.790 0.035 -106.20
2700 0.597 146.800 3.983 34.330 0.065 -50.760 0.035 -101.30
2800 0.600 142.000 3.886 30.050 0.065 -52.670 0.036 -95.96
2900 0.605 137.200 3.795 25.810 0.065 -54.540 0.037 -90.92
3000 0.608 132.500 3.706 21.620 0.065 -56.660 0.038 -85.54
S-Parameter Data Files are available online at www.mimixbroadband.com.
Mimix Broadband, Inc., 10795 Rockley Rd., Houston, Texas 77099
Tel: 281.988.4600 Fax: 281.988.4615 mimixbroadband.com
Characteristic Data and Specifications are subject to change without notice. ©2007 Mimix Broadband, Inc.
Export of this item may require appropriate export licensing from the U.S. Government. In purchasing these parts, U.S. Domestic customers accept
their obligation to be compliant with U.S. Export Laws.
January 2007 - Rev 15-Jan-07
0.25-3.0 GHz
High Dynamic Range Amplifier
Page 9 of 10
Physical Dimensions
CMM6004-SC
123
4
DIMENSIONS IN MILLIMETERS
[INCHES]
4.50
[0.177]
1.73
[0.068]
0.46
[0.18]
3X 1.50
[0.059]
3.00
[0.118]
0.76
[0.030]
0.38
[0.015]
0.38
[0.015]
4.41
[0.163]
1.55
[0.061]
2.50
[0.096]
0.71
[0.028]
0.99
[0.039]
0.58
[0.023]
0.64
[0.025]
0.86
[0.034]
1.27
[0.050]
3.48
[0.137]
5.33
[0.210]
3.86
[0.152]
1.70
[0.067]
2.06
[0.081]
0.41
[0.016]
Mimix Broadband, Inc., 10795 Rockley Rd., Houston, Texas 77099
Tel: 281.988.4600 Fax: 281.988.4615 mimixbroadband.com
Characteristic Data and Specifications are subject to change without notice. ©2007 Mimix Broadband, Inc.
Export of this item may require appropriate export licensing from the U.S. Government. In purchasing these parts, U.S. Domestic customers accept
their obligation to be compliant with U.S. Export Laws.
January 2007 - Rev 15-Jan-07
XXXXP
aaaaaaa
CYYWW
‘XXXX’ = Part Number
(4 chars max)
‘aaaaaaa’ = Lot-Wafer Number
(7 chars max)
‘C’ = Country of Or igin
(1 char)
‘YY WW ’ = Dat e S tamp
(year-year-week-week)
‘P’ = P lat ing Opt ion ( 1 char )
Example:
Base Part #: 60 0 4
Lot -W a fer #: 5 010
Plating Option: G (matte tin)
Date Code: 2007, week 1
C o un try of Or igin: Philipp ines
6004G
5010
P0701
0.25-3.0 GHz
High Dynamic Range Amplifier
Page 10 of 10
CMM6004-SC
Handling and Assembly Information
CAUTION! - Mimix Broadband MMIC Products contain gallium arsenide (GaAs) which can be hazardous to the human
body and the environment. For safety, observe the following procedures:
Do not ingest.
Do not alter the form of this product into a gas, powder, or liquid through burning, crushing, or chemical
processing as these by-products are dangerous to the human body if inhaled, ingested, or swallowed.
Observe government laws and company regulations when discarding this product. This product must be
discarded in accordance with methods specified by applicable hazardous waste procedures.
Life Support Policy - Mimix Broadband's products are not authorized for use as critical components in life support
devices or systems without the express written approval of the President and General Counsel of Mimix Broadband. As
used herein: (1) Life support devices or systems are devices or systems which, (a) are intended for surgical implant into
the body, or (b) support or sustain life, and whose failure to perform when properly used in accordance with instructions
for use provided in the labeling, can be reasonably expected to result in a significant injury to the user. (2) A critical
component is any component of a life support device or system whose failure to perform can be reasonably expected
to cause the failure of the life support device or system, or to affect its safety or effectiveness.
Package Attachment - This packaged product from Mimix Broadband is provided as a rugged surface mount package
compatible with high volume solder installation. Care should be taken not to apply heavy pressure to the top or base
material to avoid package damage. Vacuum tools or other suitable pick and place equipment may be used to pick and
place this part. Care should be taken to ensure that there are no voids or gaps in the solder connection so that good RF,
DC and ground connections are maintained. Voids or gaps can eventually lead not only to RF performance degradation,
but reduced reliability and life of the product due to thermal stress.
Mimix Lead-Free RoHS Compliant Program - Mimix has an active program in place to meet customer and governmental
requirements for eliminating lead (Pb) and other environmentally hazardous materials from our products. All Mimix
RoHS compliant components are form, fit and functional replacements for their non-RoHS equivalents. Lead plating of
our RoHS compliant parts is 100% matt tin (Sn) over copper alloy and is backwards compatible with current standard
SnPb low-temperature reflow processes as well as higher temperature (260°C reflow) “Pb Free” processes.
Ordering Information
The CMM6004-SC is available in a surface-mount SOT-89 package and devices are available in tape and reel.
Part Number for Ordering Description
CMM6004-SC-0G00
CMM6004-SC-0G0T
Matte Tin finished RoHS compliant SOT-89 surface-mount power package in
bulk quantity
Matte Tin finished RoHS compliant SOT-89 surface-mount power package in
tape and reel
PB-CMM6004-SC-00A0 Evaluation Board with SMA connectors for CMM6004-SC matched at 900 MHz
PB-CMM6004-SC-00B0 Evaluation Board with SMA connectors for CMM6004-SC matched at 1900 MHz
PB-CMM6004-SC-00C0 Evaluation Board with SMA connectors for CMM6004-SC matched at 2400 MHz
We also offer the plastic package with SnPb (Tin-Lead) or NiPdAu plating. Please contact your regional sales manager
for more information regarding different plating types.
Mimix Broadband, Inc., 10795 Rockley Rd., Houston, Texas 77099
Tel: 281.988.4600 Fax: 281.988.4615 mimixbroadband.com
Characteristic Data and Specifications are subject to change without notice. ©2007 Mimix Broadband, Inc.
Export of this item may require appropriate export licensing from the U.S. Government. In purchasing these parts, U.S. Domestic customers accept
their obligation to be compliant with U.S. Export Laws.
January 2007 - Rev 15-Jan-07
