1.5KA6.8 thru 1.5KA47A www.vishay.com Vishay General Semiconductor PAR(R) Transient Voltage Suppressors High Temperature Stability and High Reliability Conditions FEATURES * Junction passivation optimized design passivated anisotropic rectifier technology * TJ = 185 C capability suitable for high reliability and automotive requirement * Available in uni-directional polarity only * 1500 W peak pulse power capability with a 10/1000 s waveform * Excellent clamping capability Case Style 1.5KA * Very fast response time * Low incremental surge resistance PRIMARY CHARACTERISTICS VWM 5.5 V to 40.2 V VBR 6.8 V to 47 V PPPM 1500 W PD 6.5 W IFSM 200 A TJ max. 185 C Polarity Uni-directional Package 1.5KE * Solder dip 275 C max. 10 s, per JESD 22-B106 * AEC-Q101 qualified * Material categorization: For definitions of compliance please see www.vishay.com/doc?99912 MECHANICAL DATA Case: Molded epoxy body over passivated junction Molding compound meets UL 94 V-0 flammability rating Base P/NHE3 - RoHS-compliant, AEC-Q101 qualified TYPICAL APPLICATIONS Use in sensitive electronics protection against voltage transients induced by inductive load switching and lighting on ICs, MOSFET, signal lines of sensor units for consumer, computer, industrial, automotive and telecommunication. Terminals: Matte tin plated leads, solderable J-STD-002 and JESD 22-B102 HE3 suffix meets JESD 201 class 2 whisker test per Polarity: Color band denotes cathode end MAXIMUM RATINGS (TA = 25 C unless otherwise noted) PARAMETER Peak pulse power dissipation with a 10/1000 s SYMBOL waveform (1) (fig. 1) Peak pulse current at TA = 25 C with a 10/1000 s waveform (1) (fig. 3) LIMIT UNIT PPPM 1500 W IPPM See next table A Power dissipation on infinite heatsink at TL = 75 C (fig. 5) PD 6.5 W Peak forward surge current 8.3 ms single half sine-wave (2) IFSM 200 A Maximum instantaneous forward voltage at 100 A Operating junction and storage temperature range (2) VF 3.5 V TJ, TSTG - 65 to + 185 C Notes (1) Non-repetitive current pulse, per fig. 3 and derated above T = 25 C per fig. 2 A (2) 8.3 ms single half sine-wave or equivalent square wave, duty cycle = 4 pulses per minute maximum Revision: 09-Feb-11 Document Number: 88300 1 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 1.5KA6.8 thru 1.5KA47A www.vishay.com Vishay General Semiconductor ELECTRICAL CHARACTERISTICS (TA = 25 C unless otherwise noted) DEVICE TYPE BREAKDOWN VOLTAGE VBR (1) AT IT (V) MIN. MAX. STAND-OFF TEST CURRENT VOLTAGE VWM IT (mA) (V) MAXIMUM REVERSE LEAKAGE AT VWM ID (A) TJ = 150 C MAXIMUM REVERSE LEAKAGE AT VWM ID (A) PEAK PULSE CURRENT IPPM (2) (A) MAXIMUM CLAMPING VOLTAGE AT IPPM VC (V) MAXIMUM TEMP. COEFFICIENT OF VBR (%/C) 1.5KA6.8 6.12 7.48 10 5.50 1000 10 000 139 10.8 0.057 1.5KA6.8A 6.45 7.14 10 5.80 1000 10 000 143 10.5 0.057 1.5KA7.5 6.75 8.25 10 6.05 500 5000 128 11.7 0.061 1.5KA7.5A 7.13 7.88 10 6.40 500 5000 133 11.3 0.061 1.5KA8.2 7.38 9.02 10 6.63 200 2000 120 12.5 0.065 1.5KA8.2A 7.79 8.61 10 7.02 200 2000 124 12.1 0.065 1.5KA9.1 8.19 10.0 1.0 7.37 50 500 109 13.8 0.068 1.5KA9.1A 8.65 9.55 1.0 7.78 50 500 112 13.4 0.068 1.5KA10 9.00 11.0 1.0 8.10 20 200 100 15.0 0.073 1.5KA10A 9.50 10.5 1.0 8.55 20 200 103 14.5 0.073 1.5KA11 9.90 12.1 1.0 8.92 5.0 50 92.6 16.2 0.075 1.5KA11A 10.5 11.6 1.0 9.40 5.0 50 96.2 15.6 0.076 1.5KA12 10.8 13.2 1.0 9.72 2.0 10 86.7 17.3 0.076 1.5KA12A 11.4 12.6 1.0 10.2 2.0 10 89.8 16.7 0.078 1.5KA13 11.7 14.3 1.0 10.5 2.0 10 78.9 19.0 0.081 1.5KA13A 12.4 13.7 1.0 11.1 2.0 10 82.4 18.2 0.081 1.5KA15 13.5 16.3 1.0 12.1 1.0 10 68.2 22.0 0.084 1.5KA15A 14.3 15.8 1.0 12.8 1.0 10 70.8 21.2 0.084 1.5KA16 14.4 17.6 1.0 12.9 1.0 10 63.8 23.5 0.086 1.5KA16A 15.2 16.8 1.0 13.6 1.0 10 66.7 22.5 0.086 1.5KA18 16.2 19.8 1.0 14.5 1.0 10 56.6 26.5 0.088 1.5KA18A 17.1 18.9 1.0 15.3 1.0 10 59.5 25.2 0.088 1.5KA20 18.0 22.0 1.0 16.2 1.0 10 51.5 29.1 0.090 1.5KA20A 19.0 21.0 1.0 17.1 1.0 10 54.2 27.7 0.090 1.5KA22 19.8 24.2 1.0 17.8 1.0 10 47.0 31.9 0.092 1.5KA22A 20.9 23.1 1.0 18.8 1.0 10 49.0 30.6 0.092 1.5KA24 21.6 26.4 1.0 19.4 1.0 10 43.2 34.7 0.094 1.5KA24A 22.8 25.2 1.0 20.5 1.0 10 45.2 33.2 0.094 1.5KA27 24.3 29.7 1.0 21.8 1.0 10 38.4 39.1 0.096 1.5KA27A 25.7 28.4 1.0 23.1 1.0 10 40.0 37.5 0.096 1.5KA30 27.0 33.0 1.0 24.3 1.0 10 34.5 43.5 0.097 1.5KA30A 28.5 31.5 1.0 25.6 1.0 10 36.2 41.4 0.097 1.5KA33 29.7 36.3 1.0 26.8 1.0 10 31.4 47.7 0.098 1.5KA33A 31.4 34.7 1.0 28.2 1.0 10 32.8 45.7 0.098 1.5KA36 32.4 39.6 1.0 29.1 1.0 10 28.8 52.0 0.099 1.5KA36A 34.2 37.8 1.0 30.8 1.0 10 30.1 49.9 0.099 1.5KA39 35.1 42.9 1.0 31.6 1.0 10 26.6 56.4 0.100 1.5KA39A 37.1 41.0 1.0 33.3 1.0 10 27.8 53.9 0.100 1.5KA43 38.7 47.3 1.0 34.8 1.0 20 24.2 61.9 0.101 1.5KA43A 40.9 45.2 1.0 36.8 1.0 20 25.3 59.3 0.101 1.5KA47 42.3 51.7 1.0 38.1 1.0 20 22.1 67.8 0.101 1.5KA47A 44.7 49.4 1.0 40.2 1.0 20 23.1 64.8 0.101 Notes (1) V BR measured after IT applied for 300 s = square wave pulse or equivalent (2) Surge current waveform per fig. 3 and derate per fig. 2 (3) All terms and symbols are consistent with ANSI/IEEE C62.35 Revision: 09-Feb-11 Document Number: 88300 2 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 1.5KA6.8 thru 1.5KA47A www.vishay.com Vishay General Semiconductor ORDERING INFORMATION (Example) PREFERRED P/N UNIT WEIGHT (g) PREFERRED PACKAGE CODE BASE QUANTITY DELIVERY MODE 0.916 54 1400 13" diameter paper tape and reel 1.5KA6.8AHE3/54 (1) Note (1) AEC-Q101 qualified RATINGS AND CHARACTERISTICS CURVES (TA = 25 C unless otherwise noted) 150 IPPM - Peak Pulse Current, % IRSM PPPM - Peak Pulse Power (kW) 100 10 1 1.0 s 100 Half Value - IPP IPPM 2 50 10/1000 s Waveform as defined by R.E.A. td 10 s 100 s 1.0 ms 10 ms 0 1.0 2.0 3.0 td - Pulse Width (s) t - Time (ms) Fig. 1 - Peak Pulse Power Rating Curve Fig. 3 - Pulse Waveform 100 4.0 20 000 75 50 25 0 Peak Value IPPM 0 CJ - Junction Capacitance (pF) Peak Pulse Power (PPP) or Current (IPP) Derating in Percentage, % 0.1 0.1 s TJ = 25 C Pulse Width (td) is defined as the Point where the Peak Current decays to 50 % of IPPM tr = 10 s 0 25 50 75 100 125 150 175 200 TJ - Initial Temperature (C) Fig. 2 - Pulse Power or Current vs. Initial Junction Temperature Revision: 09-Feb-11 TJ = 25 C f = 1.0 MHz Vsig = 50 mVp-p 10 000 1000 Measured at Zero Bias Measured at Stand-Off Voltage VWM 100 1.0 10 100 VBR - Breakdown Voltage (V) Fig. 4 - Typical Junction Capacitance Unidirectional Document Number: 88300 3 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 1.5KA6.8 thru 1.5KA47A www.vishay.com Vishay General Semiconductor IFSM - Peak Forward Surge Current (A) PD - Power Dissipation (%) 100 60 Hz Resistive or Inductive Load 75 50 L = 0.375" (9.5 mm) Lead Lengths 25 200 TL = 75 C 8.3 ms Single Half Sine-Wave 100 10 0 0 50 25 75 100 125 150 175 1 200 10 100 Number of Cycles at 60 Hz TL - Lead Temperature (C) Fig. 5 - Power Derating Curve Fig. 6 - Maximum Non-Repetitive/Peak Forward Surge Current PACKAGE OUTLINE DIMENSIONS in inches (millimeters) Case Style 1.5KA 1.0 (25.4) MIN. 0.210 (5.3) 0.190 (4.8) DIA. 0.375 (9.5) 0.285 (7.2) 1.0 (25.4) MIN. 0.042 (1.07) 0.038 (0.96) DIA. Revision: 09-Feb-11 Document Number: 88300 4 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, "Vishay"), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer's technical experts. Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. (c) 2017 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED Revision: 08-Feb-17 1 Document Number: 91000 Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Vishay: 1.5KA10/54 1.5KA10HE3/54 1.5KA10HE3/73 1.5KA12/54 1.5KA12A/54 1.5KA12AHE3/54 1.5KA12AHE3/73 1.5KA12HE3/54 1.5KA12HE3/73 1.5KA13A/54 1.5KA13AHE3/54 1.5KA13AHE3/73 1.5KA15/54 1.5KA15A/4 1.5KA15A/54 1.5KA15AHE3/54 1.5KA15AHE3/73 1.5KA15HE3/54 1.5KA15HE3/73 1.5KA16/54 1.5KA16A/54 1.5KA16AHE3/54 1.5KA16AHE3/73 1.5KA16HE3/54 1.5KA16HE3/73 1.5KA18/54 1.5KA18A/4 1.5KA18A/54 1.5KA18AHE3/54 1.5KA18AHE3/73 1.5KA18HE3/54 1.5KA18HE3/73 1.5KA20/54 1.5KA20A/54 1.5KA20A-E3/51 1.5KA20A-E3/73 1.5KA20AHE3/54 1.5KA20AHE3/73 1.5KA20HE3/54 1.5KA20HE3/73 1.5KA22A/54 1.5KA22AHE3/54 1.5KA22AHE3/73 1.5KA24/4 1.5KA24/54 1.5KA24A/4 1.5KA24A/54 1.5KA24AHE3/54 1.5KA24AHE3/73 1.5KA24HE3/54 1.5KA24HE3/73 1.5KA27A/4 1.5KA27A/54 1.5KA27A-E3/51 1.5KA27AHE3/51 1.5KA27AHE3/54 1.5KA27AHE3/73 1.5KA27HE3/54 1.5KA27HE3/73 1.5KA30/54 1.5KA30A/54 1.5KA30HE3/54 1.5KA30HE3/73 1.5KA33/54 1.5KA33A/54 1.5KA33AHE3/51 1.5KA33AHE3/54 1.5KA33AHE3/73 1.5KA33HE3/54 1.5KA33HE3/73 1.5KA36/54 1.5KA36A/54 1.5KA36AHE3/54 1.5KA36AHE3/73 1.5KA36HE3/54 1.5KA36HE3/73 1.5KA39A/54 1.5KA39AHE3/54 1.5KA39AHE3/73 1.5KA43/54 1.5KA43A/4 1.5KA43A/54 1.5KA43AHE3/54 1.5KA43AHE3/73 1.5KA43HE3/54 1.5KA43HE3/73 1.5KA47A/4 1.5KA47A/54 1.5KA47AHE3/54 1.5KA6.8A/54 1.5KA6.8AHE3/54 1.5KA6.8AHE3/73 1.5KA6.8HE3/54 1.5KA6.8HE3/73 1.5KA7.5A/54 1.5KA7.5AHE3/54 1.5KA7.5AHE3/73 1.5KA7.5HE3/54 1.5KA7.5HE3/73 1.5KA8.2/54