1.5KA12AHE3/54 - Vishay Semiconductors

1.5KA6.8 thru 1.5KA47A

www.vishay.com Vishay General Semiconductor

Revision: 09-Feb-11 1Document Number: 88300

For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

PAR® Transient Voltage Suppressors

High Temperature Stability and High Reliability Conditions

TYPICAL APPLICATIONS

Use in sensitive electronics protection against voltage

transients induced by inductive load switching and lighting

on ICs, MOSFET, signal lines of sensor units for consumer,

computer, industrial, automotive and telecommunication.

FEATURES

• Junction passivation optimized design

passivated anisotropic rectifier technology

•T

J = 185 °C capability suitable for high reliability

and automotive requirement

• Available in uni-directional polarity only

• 1500 W peak pulse power capability with a 10/1000 μs

waveform

• Excellent clamping capability

• Very fast response time

• Low incremental surge resistance

• Solder dip 275 °C max. 10 s, per JESD 22-B106

• AEC-Q101 qualified

• Material categorization: For definitions of compliance

please see www.vishay.com/doc?99912

MECHANICAL DATA

Case: Molded epoxy body over passivated junction

Molding compound meets UL 94 V-0 flammability rating

Base P/NHE3 - RoHS-compliant, AEC-Q101 qualified

Terminals: Matte tin plated leads, solderable per

J-STD-002 and JESD 22-B102

HE3 suffix meets JESD 201 class 2 whisker test

Polarity: Color band denotes cathode end

Notes

(1) Non-repetitive current pulse, per fig. 3 and derated above TA = 25 °C per fig. 2

(2) 8.3 ms single half sine-wave or equivalent square wave, duty cycle = 4 pulses per minute maximum

PRIMARY CHARACTERISTICS

VWM 5.5 V to 40.2 V

VBR 6.8 V to 47 V

PPPM 1500 W

PD6.5 W

IFSM 200 A

TJ max. 185 °C

Polarity Uni-directional

Package 1.5KE

Case Style 1.5KA

MAXIMUM RATINGS (TA = 25 °C unless otherwise noted)

PARAMETER SYMBOL LIMIT UNIT

Peak pulse power dissipation with a 10/1000 μs waveform (1) (fig. 1) PPPM 1500 W

Peak pulse current at TA = 25 °C with a 10/1000 μs waveform (1) (fig. 3) IPPM See next table A

Power dissipation on infinite heatsink at TL = 75 °C (fig. 5) PD6.5 W

Peak forward surge current 8.3 ms single half sine-wave (2) IFSM 200 A

Maximum instantaneous forward voltage at 100 A (2) VF3.5 V

Operating junction and storage temperature range TJ, TSTG - 65 to + 185 °C

1.5KA6.8 thru 1.5KA47A

www.vishay.com Vishay General Semiconductor

Revision: 09-Feb-11 2Document Number: 88300

For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

Notes

(1) VBR measured after IT applied for 300 μs = square wave pulse or equivalent

(2) Surge current waveform per fig. 3 and derate per fig. 2

(3) All terms and symbols are consistent with ANSI/IEEE C62.35

ELECTRICAL CHARACTERISTICS (TA = 25 °C unless otherwise noted)

DEVICE TYPE

BREAKDOWN

VOLTAGE

VBR (1) AT IT

(V)

TEST

CURRENT

(mA)

STAND-OFF

VOLTAGE

VWM

(V)

MAXIMUM

REVERSE

LEAKAGE

AT VWM

ID (μA)

TJ = 150 °C

MAXIMUM

REVERSE

LEAKAGE

AT VWM

ID (μA)

PEAK

PULSE

CURRENT

IPPM (2)

(A)

MAXIMUM

CLAMPING

VOLTAGE

AT IPPM

VC (V)

MAXIMUM

TEMP.

COEFFICIENT

OF VBR

(%/°C)

MIN. MAX.

1.5KA6.8 6.12 7.48 10 5.50 1000 10 000 139 10.8 0.057

1.5KA6.8A 6.45 7.14 10 5.80 1000 10 000 143 10.5 0.057

1.5KA7.5 6.75 8.25 10 6.05 500 5000 128 11.7 0.061

1.5KA7.5A 7.13 7.88 10 6.40 500 5000 133 11.3 0.061

1.5KA8.2 7.38 9.02 10 6.63 200 2000 120 12.5 0.065

1.5KA8.2A 7.79 8.61 10 7.02 200 2000 124 12.1 0.065

1.5KA9.1 8.19 10.0 1.0 7.37 50 500 109 13.8 0.068

1.5KA9.1A 8.65 9.55 1.0 7.78 50 500 112 13.4 0.068

1.5KA10 9.00 11.0 1.0 8.10 20 200 100 15.0 0.073

1.5KA10A 9.50 10.5 1.0 8.55 20 200 103 14.5 0.073

1.5KA11 9.90 12.1 1.0 8.92 5.0 50 92.6 16.2 0.075

1.5KA11A 10.5 11.6 1.0 9.40 5.0 50 96.2 15.6 0.076

1.5KA12 10.8 13.2 1.0 9.72 2.0 10 86.7 17.3 0.076

1.5KA12A 11.4 12.6 1.0 10.2 2.0 10 89.8 16.7 0.078

1.5KA13 11.7 14.3 1.0 10.5 2.0 10 78.9 19.0 0.081

1.5KA13A 12.4 13.7 1.0 11.1 2.0 10 82.4 18.2 0.081

1.5KA15 13.5 16.3 1.0 12.1 1.0 10 68.2 22.0 0.084

1.5KA15A 14.3 15.8 1.0 12.8 1.0 10 70.8 21.2 0.084

1.5KA16 14.4 17.6 1.0 12.9 1.0 10 63.8 23.5 0.086

1.5KA16A 15.2 16.8 1.0 13.6 1.0 10 66.7 22.5 0.086

1.5KA18 16.2 19.8 1.0 14.5 1.0 10 56.6 26.5 0.088

1.5KA18A 17.1 18.9 1.0 15.3 1.0 10 59.5 25.2 0.088

1.5KA20 18.0 22.0 1.0 16.2 1.0 10 51.5 29.1 0.090

1.5KA20A 19.0 21.0 1.0 17.1 1.0 10 54.2 27.7 0.090

1.5KA22 19.8 24.2 1.0 17.8 1.0 10 47.0 31.9 0.092

1.5KA22A 20.9 23.1 1.0 18.8 1.0 10 49.0 30.6 0.092

1.5KA24 21.6 26.4 1.0 19.4 1.0 10 43.2 34.7 0.094

1.5KA24A 22.8 25.2 1.0 20.5 1.0 10 45.2 33.2 0.094

1.5KA27 24.3 29.7 1.0 21.8 1.0 10 38.4 39.1 0.096

1.5KA27A 25.7 28.4 1.0 23.1 1.0 10 40.0 37.5 0.096

1.5KA30 27.0 33.0 1.0 24.3 1.0 10 34.5 43.5 0.097

1.5KA30A 28.5 31.5 1.0 25.6 1.0 10 36.2 41.4 0.097

1.5KA33 29.7 36.3 1.0 26.8 1.0 10 31.4 47.7 0.098

1.5KA33A 31.4 34.7 1.0 28.2 1.0 10 32.8 45.7 0.098

1.5KA36 32.4 39.6 1.0 29.1 1.0 10 28.8 52.0 0.099

1.5KA36A 34.2 37.8 1.0 30.8 1.0 10 30.1 49.9 0.099

1.5KA39 35.1 42.9 1.0 31.6 1.0 10 26.6 56.4 0.100

1.5KA39A 37.1 41.0 1.0 33.3 1.0 10 27.8 53.9 0.100

1.5KA43 38.7 47.3 1.0 34.8 1.0 20 24.2 61.9 0.101

1.5KA43A 40.9 45.2 1.0 36.8 1.0 20 25.3 59.3 0.101

1.5KA47 42.3 51.7 1.0 38.1 1.0 20 22.1 67.8 0.101

1.5KA47A 44.7 49.4 1.0 40.2 1.0 20 23.1 64.8 0.101

1.5KA6.8 thru 1.5KA47A

www.vishay.com Vishay General Semiconductor

Revision: 09-Feb-11 3Document Number: 88300

For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

Note

(1) AEC-Q101 qualified

RATINGS AND CHARACTERISTICS CURVES (TA = 25 °C unless otherwise noted)

Fig. 1 - Peak Pulse Power Rating Curve

Fig. 2 - Pulse Power or Current vs. Initial Junction Temperature

Fig. 3 - Pulse Waveform

Fig. 4 - Typical Junction Capacitance Unidirectional

ORDERING INFORMATION (Example)

PREFERRED P/N UNIT WEIGHT (g) PREFERRED PACKAGE CODE BASE QUANTITY DELIVERY MODE

1.5KA6.8AHE3/54 (1) 0.916 54 1400 13" diameter paper tape and reel

0.1

100

0.1 µs 1.0 µs 10 µs 100 µs 1.0 ms 10 ms

td - Pulse Width (s)

PPM

- Peak Pulse Power (kW)

100

07525 50 100 125 150 175 200

TJ - Initial Temperature (°C)

Peak Pulse Power (P

) or Current (I

)

Derating in Percentage, %

100

150

= 10 µs

Peak Value

IPPM

Half Value -

IPPM

10/1000 µs Waveform

as defined by R.E.A.

01.0 2.0 3.0 4.0

t - Time (ms)

PPM

- Peak Pulse Current, % I

RSM

= 25 °C

Pulse Width (t

)

is defined as the Point

where the Peak Current

decays to 50 % of I

PPM

Measured at

Zero Bias

101.0 100

100

1000

10 000

20 000

- Junction Capacitance (pF)

- Breakdown Voltage (V)

= 25 °C

f = 1.0 MHz

sig

= 50 mVp-p

Measured at Stand-Off

Voltage V

1.5KA6.8 thru 1.5KA47A

www.vishay.com Vishay General Semiconductor

Revision: 09-Feb-11 4Document Number: 88300

For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

Fig. 5 - Power Derating Curve Fig. 6 - Maximum Non-Repetitive/Peak Forward Surge Current

PACKAGE OUTLINE DIMENSIONS in inches (millimeters)

100

07525 100 125 150 175 200

- Power Dissipation (%)

- Lead Temperature (°C)

L = 0.375" (9.5 mm)

Lead Lengths

60 Hz Resistive

or Inductive Load

11 0 100

IFSM - Peak Forward Surge Current (A)

Number of Cycles at 60 Hz

100

200

TL = 75 °C

8.3 ms Single Half Sine-Wave

1.0 (25.4)

MIN.

1.0 (25.4)

MIN.

0.375 (9.5)

0.285 (7.2)

0.210 (5.3)

0.190 (4.8)

DIA.

0.042 (1.07)

0.038 (0.96)

DIA.

Case Style 1.5KA

Legal Disclaimer Notice

www.vishay.com Vishay

Revision: 08-Feb-17 1Document Number: 91000

Disclaimer



ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE

RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.

Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,

“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other

disclosure relating to any product.

Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or

the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all

liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,

consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular

purpose, non-infringement and merchantability.

Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of

typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding

statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a

particular product with the properties described in the product specification is suitable for use in a particular application.

Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over

time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s

technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,

including but not limited to the warranty expressed therein.

Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining

applications or for any other application in which the failure of the Vishay product could result in personal injury or death.

Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk.

Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for

such applications.

No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document

or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.

Mouser Electronics

Authorized Distributor

Click to View Pricing, Inventory, Delivery & Lifecycle Information:

Vishay:

1.5KA10/54 1.5KA10HE3/54 1.5KA10HE3/73 1.5KA12/54 1.5KA12A/54 1.5KA12AHE3/54 1.5KA12AHE3/73

1.5KA12HE3/54 1.5KA12HE3/73 1.5KA13A/54 1.5KA13AHE3/54 1.5KA13AHE3/73 1.5KA15/54 1.5KA15A/4

1.5KA15A/54 1.5KA15AHE3/54 1.5KA15AHE3/73 1.5KA15HE3/54 1.5KA15HE3/73 1.5KA16/54 1.5KA16A/54

1.5KA16AHE3/54 1.5KA16AHE3/73 1.5KA16HE3/54 1.5KA16HE3/73 1.5KA18/54 1.5KA18A/4 1.5KA18A/54

1.5KA18AHE3/54 1.5KA18AHE3/73 1.5KA18HE3/54 1.5KA18HE3/73 1.5KA20/54 1.5KA20A/54 1.5KA20A-E3/51

1.5KA20A-E3/73 1.5KA20AHE3/54 1.5KA20AHE3/73 1.5KA20HE3/54 1.5KA20HE3/73 1.5KA22A/54

1.5KA22AHE3/54 1.5KA22AHE3/73 1.5KA24/4 1.5KA24/54 1.5KA24A/4 1.5KA24A/54 1.5KA24AHE3/54

1.5KA24AHE3/73 1.5KA24HE3/54 1.5KA24HE3/73 1.5KA27A/4 1.5KA27A/54 1.5KA27A-E3/51 1.5KA27AHE3/51

1.5KA27AHE3/54 1.5KA27AHE3/73 1.5KA27HE3/54 1.5KA27HE3/73 1.5KA30/54 1.5KA30A/54 1.5KA30HE3/54

1.5KA30HE3/73 1.5KA33/54 1.5KA33A/54 1.5KA33AHE3/51 1.5KA33AHE3/54 1.5KA33AHE3/73 1.5KA33HE3/54

1.5KA33HE3/73 1.5KA36/54 1.5KA36A/54 1.5KA36AHE3/54 1.5KA36AHE3/73 1.5KA36HE3/54 1.5KA36HE3/73

1.5KA39A/54 1.5KA39AHE3/54 1.5KA39AHE3/73 1.5KA43/54 1.5KA43A/4 1.5KA43A/54 1.5KA43AHE3/54

1.5KA43AHE3/73 1.5KA43HE3/54 1.5KA43HE3/73 1.5KA47A/4 1.5KA47A/54 1.5KA47AHE3/54 1.5KA6.8A/54

1.5KA6.8AHE3/54 1.5KA6.8AHE3/73 1.5KA6.8HE3/54 1.5KA6.8HE3/73 1.5KA7.5A/54 1.5KA7.5AHE3/54

1.5KA7.5AHE3/73 1.5KA7.5HE3/54 1.5KA7.5HE3/73 1.5KA8.2/54