This is information on a product in full production.
May 2013 DocID2023 Rev 4 1/13
HCF4013
Dual D-type flip-flop
Datasheet - production data
Features
•Set-reset capability
•Static flip-flop operation - retains state
indefinitely with clock level either “high” or “low”
•Medium speed operation 16 MHz (typ.), clock
toggle rate at 10 V
•Standardized symmetrical output
characteristics
•Quiescent current specified up to 20 V
•5 V, 10 V, and 15 V parametric ratings
•Input leakage current II = 100 nA (max.) at
VDD = 18 V, TA = 25 °C
•100 % tested for quiescent current
•ESD performance
–HBM: 2 kV
– MM: 200 V
–CDM: 1 kV
Applications
•Automotive
•Industrial
•Computer
•Consumer
Description
The HCF4013 is a monolithic integrated circuit
fabricated in metal oxide semiconductor
technology available in PDIP14 and SO14
packages.
The HCF4013 consists of two identical,
independent data type flip-flops. Each flip-flop has
independent data, set, reset, and clock inputs,
and Q and Q outputs. This device can be used for
shift register applications. It can also be used for
counter and toggle applications by connecting Q
output to the data input.
The logic level present at the D input is
transferred to the Q output during the positive-
going transition of the clock pulse. Setting or
resetting is independent of the clock and is
accomplished by a high level on the set or reset
line, respectively.
PDIP14 SO14
Table 1. Device summary table
Order code Temperature range Package Packing Marking
HCF4013M013TR -55 ° C to +125 ° C SO14
Tape and reel
HCF4013
HCF4013YM013TR (1) -40 ° C to +125 ° C SO14 (automotive grade)(1) HCF4013Y
HCF4013BEY -55 ° C to +125 ° C PDIP14 Tube HCF4013BE
1. Qualification and characterization according to AEC Q100 and Q003 or equivalent, advanced screening according to AEC
Q001 and Q002 or equivalent.
www.st.com
Contents HCF4013
2/13 DocID2023 Rev 4
Contents
1 Pin information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
2 Functional description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
3 Electrical characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
4 Package information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
4.1 PDIP14 package information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
4.2 SO14 package information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11
5 Ordering information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
6 Revision history . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
DocID2023 Rev 4 3/13
HCF4013 Pin information
13
1 Pin information
Figure 1. Pin connections (top view)
Table 2. Pin description
Pin no Symbol Name and function
3, 11 CLOCK1
CLOCK2 Clock inputs
4, 10 RESET1
RESET2 Reset inputs
6, 8 SET1, SET2 Set inputs
5, 9 D1, D2 Data inputs
1, 13 Q1, Q2 Data outputs
2, 12 Q1, Q2 Data outputs
7V
SS Negative supply voltage
14 VDD Positive supply voltage





4
&/2&.
5(6(7
'
6(7
966
4 4
&/2&.
5(6(7
'
6(7
9''
4
))
))
*$06&%
Functional description HCF4013
4/13 DocID2023 Rev 4
2 Functional description
Figure 2. Logic diagram
1. All inputs are protected by a COS/MOS protection network.
Figure 3. Input equivalent circuit
Table 3. Truth table
CLOCK(1)
1. Low level
D RESET SET Q Q
LLLLH
HLLHL
X(2) LLQQ
X(2)
2. Don’t care
X(2) HLLH
X(2) X(2) LHHL
X(2) X(2) HHHH

5(6(7 &/
7*
&/

'$7$
0DVWHUVHFWLRQ 6ODYHVHFWLRQ
&/
&/
&/
&/
7* 7*
&/
&/

6(7

&/
&/ &/
4
4


%XIIHUHGRXWSXWV
3LQ 9''
3LQ 966
*$06&%
9''
,1387
966
*$06&%
DocID2023 Rev 4 5/13
HCF4013 Electrical characteristics
13
3 Electrical characteristics
Absolute maximum ratings are those values beyond which damage to the device may occur.
Functional operation under these conditions is not implied. All voltage values are referred to
VSS pin voltage.
Table 4. Absolute maximum ratings (AMR)
Symbol Parameter Value Unit
VDD Supply voltage -0.5 to +22
V
VIDC input voltage -0.5 to VDD + 0.5
IIDC input current ±10 mA
PD
Power dissipation per package 200
mW
Power dissipation per output transistor 100
Top Operating temperature -55 to +125
°C
Tstg Storage temperature -65 to +150
Table 5. Recommended operating conditions
Symbol Parameter Value Unit
VDD Supply voltage 3 to 20
V
VIInput voltage 0 to VDD
Top Operating temperature -55 to 125 °C
Electrical characteristics HCF4013
6/13 DocID2023 Rev 4
Table 6. DC specifications(1)
Sym. Parameter
Test condition Value
Unit
VI (V) VO (V) |IO| (μA) VDD(V)
TA = 25 °C -40 to 85 °C -55 to 125°C
Min. Typ. Max. Min. Max. Min. Max.
IL
Quiescent
current
0/5 5 0.02 1 30 30
μA
0/10 10 0.02 2 60 60
0/15 15 0.02 4 120 120
0/20 20 0.04 20 600 600
VOH
High level
output
voltage
0/5 <1 5 4.95 4.95 4.95
V
0/10 <1 10 9.95 9.95 9.95
0/15 <1 15 14.95 14.95 14.95
VOL
Low level
output
voltage
5/0 <1 5 0.05 0.05 0.05
10/0 <1 10 0.05 0.05 0.05
15/0 <1 15 0.05 0.05 0.05
VIH
High level
input
voltage
0.5/4.5 <1 5 3.5 3.5 3.5
1/9 <1 10 7 7 7
1.5/13.5 <1 15 11 11 11
VIL
Low level
input
voltage
4.5/0.5 <1 5 1.5 1.5 1.5
9/1 <1 10 3 3 3
13.5/1.5 <1 15 4 4 4
IOH
Output
drive
current
0/5 2.5 <1 5 -1.36 -3.2 -1.15 -1.1
mA
0/5 4.6 <1 5 -0.44 -1 -0.36 -0.36
0/10 9.5 <1 10 -1.1 -2.6 -0.9 -0.9
0/15 13.5 <1 15 -3.0 -6.8 -2.4 -2.4
IOL
Output sink
current
0/5 0.4 <1 5 0.44 1 0.36 0.36
0/10 0.5 <1 10 1.1 2.6 0.9 0.9
0/15 1.5 <1 15 3.0 6.8 2.4 2.4
II
Input
leakage
current
0/18 Any input 18 ±10-5 ±0.1 ±1±1μA
CI
Input
capacitance Any input 5 7.5 pF
1. The noise margin for both level "1" and "0" is: 1 V min. with VDD = 5 V, 2 V min. with VDD = 10 V, and 2.5 V min. with
VDD = 15 V.
DocID2023 Rev 4 7/13
HCF4013 Electrical characteristics
13
Table 7. Dynamic electrical characteristics
(Tamb = 25 °C, CL = 50 pF, RL = 200 kΩ, tr = tf = 20 ns)
Symbol Parameter
Test condition Value(1)
1. The typical temperature coefficient for all VDD values is 0.3 %/°C.
Unit
VDD (V) Min. Typ. Max.
tTLH, tTHL
Propagation delay time
(CLOCK to Q or Q outputs)
5150300
ns
10 65 130
15 45 90
tPLH
Propagation delay time
(SET to Q or RESET to Q)
5150300
10 65 130
15 45 90
tPHL
Propagation delay time
(SET to Q or RESET to Q)
5200400
10 85 170
15 60 120
tTHL, tTLH Transition time
5100200
10 50 100
15 40 80
fCL(2)
2. Input tr, tf = 5 ns
Maximum clock input frequency
53.57
MHz10 8 16
15 12 24
tW
Clock pulse width
514070
ns
10 60 30
15 40 20
Set or reset pulse width
518090
10 80 40
15 50 25
tr , tf (3)
3. If more than one unit is cascaded in a parallel clocked application, tr should be made less than or equal to
the sum of the fixed propagation delay time at 15 pF and the transition time of the carry output driving stage
for the estimated capacitive load.
Clock input rise or fall time
515
μs10 4
15 1
tsData setup time
54020
ns10 20 10
15 15 7
Electrical characteristics HCF4013
8/13 DocID2023 Rev 4
Figure 4. Test circuit
1. Legend: CL = 50 pF or equivalent (includes jig and probe capacitance), RL = 200 KΩ, RT = ZOUT of pulse
generator (typically 50 Ω)
Figure 5. Dn to Qn timings (50 % clock duty cycle)
3XOVHJHQHUDWRU
57
9''
966 &/5/
'87
*$06&%
QV QV
9&&
'Q





 *1'
&/2&.
4Q4Q
9&&
*1'
92+
92/


WZWZ
WK
WV
IPD[
W3/+ W3+/
*$06&%
DocID2023 Rev 4 9/13
HCF4013 Electrical characteristics
13
Figure 6. Set and reset timings
QV
9&&


 *1'
4Q
WZ
W7+/
W3/+ W3+/
QV
9&&
*1'
92+
92/
92+
92/
4Q
6(7
5(6(7



 

 

 
WZ
W3/+
W3+/
W7/+
*$06&%
Package information HCF4013
10/13 DocID2023 Rev 4
4 Package information
In order to meet environmental requirements, ST offers these devices in different grades of
ECOPACK® packages, depending on their level of environmental compliance. ECOPACK®
specifications, grade definitions and product status are available at: www.st.com.
ECOPACK® is an ST trademark.
4.1 PDIP14 package information
Figure 7. PDIP14 package mechanical drawing
Table 8. PDIP14 package mechanical data
Ref
Dimensions
Millimeters Inches
Min. Typ. Max. Min. Typ. Max.
a1 0.51 0.020
B 1.39 1.65 0.055 0.065
b0.5 0.020
b1 0.25 0.010
D200.787
E8.5 0.335
e2.54 0.100
e3 15.24 0.600
F 7.1 0.280
I 5.1 0.201
L3.3 0.130
Z 1.27 2.54 0.050 0.100
*$06&%
=
E
H
%H
=
D ,
/
(
E
'
)

DocID2023 Rev 4 11/13
HCF4013 Package information
13
4.2 SO14 package information
Figure 8. SO14 package mechanical drawing
Table 9. SO14 package mechanical data
Ref
Dimensions
Millimeters Inches
Min. Typ. Max. Min. Typ. Max.
A 1.75 0.068
a1 0.1 0.2 0.003 0.007
a2 1.65 0.064
b 0.35 0.46 0.013 0.018
b1 0.19 0.25 0.007 0.010
C0.5 0.019
c1 45 °45 °
D 8.55 8.75 0.336 0.344
E 5.8 6.2 0.228 0.244
e1.27 0.050
e3 7.62 0.300
F 3.8 4.0 0.149 0.157
G 4.6 5.3 0.181 0.208
L 0.5 1.27 0.019 0.050
M 0.68 0.026
S8 °8 °
*$06&%
/*
F
&
D E
(
6
$
D
H
H
E
'
0
)

Ordering information HCF4013
12/13 DocID2023 Rev 4
5 Ordering information
6 Revision history
Table 10. Order codes
Order code Temperature range Package Packing Marking
HCF4013M013TR -55 ° C to +125 ° C SO14
Tape and
reel
HCF4013
HCF4013YM013TR(1) -40 ° C to +125 ° C SO14
(automotive grade)(1)
1. Qualification and characterization according to AEC Q100 and Q003 or equivalent, advanced screening
according to AEC Q001 and Q002 or equivalent.
HCF4013Y
HCF4013BEY -55 ° C to +125 ° C PDIP14 Tube HCF4013BE
Table 11. Document revision history
Date Revision Changes
Sep-2001 1Initial release.
18-Feb-2013 2
Document template and layout updated
Removed “B” from part number
Added ESD information to Features
Updated package names (PDIP-14 and SO-14 instead of DIP-14
and SOP-14).
Added Applications
Added Device summary table
Updated symbol names in Table 7
Added Section 5: Ordering information
30-Apr-2013 3 Features: updated ESD information
30-May-2013 4 Features: updated ESD information
Updated footnote in Table 1 and Table 10
DocID2023 Rev 4 13/13
HCF4013
13
Please Read Carefully:
Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries (“ST”) reserve the
right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any
time, without notice.
All ST products are sold pursuant to ST’s terms and conditions of sale.
Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no
liability whatsoever relating to the choice, selection or use of the ST products and services described herein.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this
document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products
or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such
third party products or services or any intellectual property contained therein.
UNLESS OTHERWISE SET FORTH IN ST’S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED
WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED
WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS
OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT.
ST PRODUCTS ARE NOT AUTHORIZED FOR USE IN WEAPONS. NOR ARE ST PRODUCTS DESIGNED OR AUTHORIZED FOR USE
IN: (A) SAFETY CRITICAL APPLICATIONS SUCH AS LIFE SUPPORTING, ACTIVE IMPLANTED DEVICES OR SYSTEMS WITH
PRODUCT FUNCTIONAL SAFETY REQUIREMENTS; (B) AERONAUTIC APPLICATIONS; (C) AUTOMOTIVE APPLICATIONS OR
ENVIRONMENTS, AND/OR (D) AEROSPACE APPLICATIONS OR ENVIRONMENTS. WHERE ST PRODUCTS ARE NOT DESIGNED
FOR SUCH USE, THE PURCHASER SHALL USE PRODUCTS AT PURCHASER’S SOLE RISK, EVEN IF ST HAS BEEN INFORMED IN
WRITING OF SUCH USAGE, UNLESS A PRODUCT IS EXPRESSLY DESIGNATED BY ST AS BEING INTENDED FOR “AUTOMOTIVE,
AUTOMOTIVE SAFETY OR MEDICAL” INDUSTRY DOMAINS ACCORDING TO ST PRODUCT DESIGN SPECIFICATIONS.
PRODUCTS FORMALLY ESCC, QML OR JAN QUALIFIED ARE DEEMED SUITABLE FOR USE IN AEROSPACE BY THE
CORRESPONDING GOVERNMENTAL AGENCY.
Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void
any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any
liability of ST.
ST and the ST logo are trademarks or registered trademarks of ST in various countries.
Information in this document supersedes and replaces all information previously supplied.
The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners.
© 2013 STMicroelectronics - All rights reserved
STMicroelectronics group of companies
Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan -
Malaysia - Malta - Morocco - Philippines - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America
www.st.com