Model BD2130J5050AHF Rev A Ultra Low Profile 0805 Balun 50 to 50 Balanced Description The BD2130J5050AHF is a low profile sub-miniature balanced to unbalanced transformer designed for differential inputs and output locations on next generation wireless chipsets in an easy to use surface mount package covering 802.11b+g+n. The BD2130J5050AHF is ideal for high volume manufacturing and is higher performance than traditional ceramic and lumped element baluns. The BD2130J5050AHF has an unbalanced port impedance of 50 and a 50 balanced port impedance. This transformation enables single ended signals to be applied to differential ports on modern semiconductors. The output ports have equal amplitude (-3dB) with 180 degree phase differential. The BD2130J5050AHF is available on tape and reel for pick and place high volume manufacturing. Detailed Electrical Specifications*: Specifications subject to change without notice. ROOM (25C) Features: * * * * * * * * * * * * 2.1 - 3.0 GHz 0.7mm Height Profile 50 Ohm to 2 x 25 Ohm 802.11 b & g +n Compliant Low Insertion Loss DCS, PCS & UMTS Input to Output DC Isolation Surface Mountable Tape & Reel Non-conductive Surface RoHS Compliant Halogen Free Parameter Min. Frequency Unbalanced Port Imp. Balanced Port Imp.** Return Loss Insertion Loss*** Amplitude Balance Phase Balance Power Handling 2.4 Operating Temperature -55 12 Typ. 50 50 17 0.75 0.45 2 Max Min. 2.5 2.1 Max Unit 3.0 1.2 1.0 5 2 GHz dB dB dB Degrees Watts +85 C 50 50 12 1.0 0.7 2 10 0.9 0.65 5 2 +85 Typ. -55 * Insertion Loss stated at room temperature (Insertion Loss is approximately 0.1 dB higher at +85 C) Outline Drawing TOP VIEW (Near Side) 2.040.10 SIDE VIEW BOTTOM VIEW (Far Side) 0.680.07 1 4x 0.37 2 3 2x 0.15 1.290.10 6x 0.98 Orientation Marker Denotes Pin Location Orientation Marker Denotes Pin Location 6x 0.22 6 5 4 4x 0.65 Mechanical Outline -Dimensions are in Millimeters 6x 0.30 Pin Designation 1 In 2 GND/DC Feed +RF GND 3 Out 1 4 Out 2 5 GND 6 NC Visit us at www.anaren.com USA/Canada: Toll Free: Europe: Asia: (315) 432-8909 (800) 411-6596 +44 2392-232392 +86 512-62749282 Model BD2130J5050AHF Rev A Typical Broadband Performance: 0 GHz. to 6.0 GHz. Visit us at www.anaren.com USA/Canada: Toll Free: Europe: Asia: (315) 432-8909 (800) 411-6596 +44 2392-232392 +86 512-62749282 Model BD2130J5050AHF Rev A Typical Performance: 2400 MHz. to 2500 MHz. Visit us at www.anaren.com USA/Canada: Toll Free: Europe: Asia: (315) 432-8909 (800) 411-6596 +44 2392-232392 +86 512-62749282 Model BD2130J5050AHF Rev A Mounting Configuration: In order for Xinger surface mount components to work optimally, the proper impedance transmission lines must be used to connect to the RF ports. If this condition is not satisfied, insertion loss, Isolation and VSWR may not meet published specifications. All of the Xinger components are constructed from organic PTFE based composites which possess excellent electrical and mechanical stability. Xinger components are compliant to a variety of ROHS and Green standards and ready for Pb-free soldering processes. Pads are Gold plated with a Nickel barrier. An example of the PCB footprint used in the testing of these parts is shown below. An example of a DC-biased footprint is also shown below. In specific designs, the transmission line widths need to be adjusted to the unique dielectric coefficients and thicknesses as well as varying pick and place equipment tolerances. DC Bias Footprint No Bias Footprint Circuit Pattern Dimensions are in Millimeters Mounting Footprint Circuit Pattern Footprint Pad (s) Footprint Pad (s) Solder Resist Solder Resist Dimensions are in Millimeters Mounting Footprint Plated thru holes to ground 0402 Capacitor 6x .41 4x .25 6x .41 Plated thru holes to ground 3x Transmission lines 3x Transmission lines .04 .04 6x .33 6x .33 .66 .66 Plated thru holes to ground 4x .25 Visit us at www.anaren.com Plated thru holes to ground USA/Canada: Toll Free: Europe: Asia: (315) 432-8909 (800) 411-6596 +44 2392-232392 +86 512-62749282 Model BD2130J5050AHF Rev A Packaging and Ordering Information Parts are available in reel and are packaged per EIA 481-2. Parts are oriented in tape and reel as shown below. Minimum order quantities are 4000 per reel. See Model Numbers below for further ordering information. 2.00 .81 4.00 1.75 3.50 8.00 1.60 4.00 2.41 .25 Visit us at www.anaren.com USA/Canada: Toll Free: Europe: Asia: (315) 432-8909 (800) 411-6596 +44 2392-232392 +86 512-62749282