Axial Lead & Cartridge Fuses 5x20 mm > Fast-Acting > 235 Series 235 Series, PS E 5 x 20 mm, Fast-Acting Fuse Description 5x20mm fast-acting glass body cartridge fuse designed to UL specification. Features t %FTJHOFEUP6-$4" ANCE 248 Standard t 3P)4DPNQMJBOUBOE lead-free t "WBJMBCMFJODBSUSJEHF and axial lead format Applications Agency Approvals PS E Agency File Number Cartridge Certificates: NBK290502-E10480 G NBK290502-E10480 I Leaded Certificates: NBK290502-E10480 H NBK290502-E10480 J Certificates: SU05001 - 3007 SU05001 - 2002 SU05001 - 2003 Listed File: E10480 Guide No: JDYX File No: 029862 Certificate Class No: LR1422-01 Used as supplementary protection in appliance or utilization equipment to provide individual protection for components or internal circuits. Ampere Range 1A - 5A 6A & 7A Electrical Characteristics for Series 1A - 5A 6A & 7A % of Ampere Rating 100mA - 400mA 500mA - 3A 4A - 6A Ampere Rating 100% 135% 200% 100mA - 7A Opening Time 4 hours, Minimum 100mA - 7A 1 hour, Maximum 5 seconds, Maximum 100mA - 3A 4A - 6A 235 Series Agency 100mA - 7A (c) 2009 Littelfuse, Inc. Specifications are subject to change without notice. Please refer to www.littelfuse.com/series/235.html for current information. 293 Revised: January 7, 2009 235 Series Introduction to & Circuit Protection Axial Lead Cartridge Fuses Transientology 5x20 mm > Fast-Acting > 235 Series Electrical Characteristic Specifications by Item Amp Rating Amp Code (A) Voltage Rating (V) Interrupting Rating Nominal Cold Resistance (Ohms) Nominal Melting I2t (A2 sec) Agency Approvals PS E .100 0.1 250 8.4000 0.00312 x x x x .125 0.125 250 5.7500 0.00273 x x x x .200 0.2 250 3.1500 0.00867 x x x x .250 0.25 250 2.2500 0.01660 x x x x .300 0.3 250 1.6000 0.03215 x x x x .400 0.4 250 1.750 0.05845 x x x x .500 0.5 250 0.4265 0.06915 x x x x .600 0.6 250 0.3195 0.11200 x x x x .700 0.7 250 0.2625 0.15600 x x x x .800 0.8 250 0.1920 0.25300 x x x x 35A@250Vac, 10000A@125Vac 001. 1 250 0.1530 0.46750 x x x x x 1.25 1.25 250 0.1055 1.08500 x x x x x 0.0758 2.02500 x x x x x 0.0603 2.64500 x x x x x 01.6 1.6 250 002. 2 250 100A@250Vac, 10000A@125Vac 02.5 2.5 250 0.0437 5.44500 x x x x x 003. 3 250 0.0347 8.39500 x x x x x 03.5 3.5 250 0.0331 17.14000 x x 004. 4 125 0.0246 17.14000 x x x x x 005. 5 125 0.0184 27.41000 x x x x x 006. 6 125 0.0148 47.32500 x x x x x 007. 7 125 0.0157 64.81500 x x 10000@125Vac Temperature Rerating Curve x x 0.200A 0.250A 0.300A 0.400A 0.500A 0.600A 0.700A 0.800A 1A 1.25A 1.6A 2A 2.5A 3A 4A 5A 6A 0.100A 0.125A Average Time Current Curves 10000 1000 TIME IN SECONDS 100 10 1 0.1 0.01 0.1 1 10 100 1000 CURRENT IN AMPERES Please contact Littelfuse for details on T-C curve for 7A rating 235 Series 294 Revised: January 7, 2009 (c) 2009 Littelfuse, Inc. Specifications are subject to change without notice. Please refer to www.littelfuse.com/series/235.html for current information. Axial Lead & Cartridge Fuses 5x20 mm > Fast-Acting > 235 Series Soldering Parameters - Wave Soldering Recommended Process Parameters: 280 260 Wave Parameter 240 220 Lead-Free Recommendation 200 Preheat: 180 (Depends on Flux Activation Temperature) 160 140 120 100 80 60 40 (Typical Industry Recommendation) Temperature Minimum: 100 C Temperature Maximum: Preheat Time: 150 C 60-180 seconds Solder Pot Temperature: 260 C Maximum Solder Dwell Time: 2-5 seconds 240 230 220 210 200 190 180 170 160 140 150 130 120 110 90 100 80 70 60 50 40 30 0 0 20 20 10 Temperature (C) - Measured on bottom side of board 300 Recommended Hand-Solder Parameters: Time (Seconds) Cooling Time Preheat Time Solder Iron Temperature: 350 C +/- 5C Heating Time: 5 seconds max. Dwell Time Note: These devices are not recommended for IR or Convection Reflow process. Materials Body: Glass Cap: Nickel-plated brass Leads: Tin-plated Copper Operating Temperature -55C to +125C Terminal Strength MIL-STD-202G, Method 211A. Test Condition A Thermal Shock MIL-STD-202G, Method 107G, Test Condition B: (5 cycles -65OC + 125OC) Solderability Reference IEC 60127 Second Edition 2003-01 Annex A Vibration MIL-STD-202G, Method 201A Humidity Product Marking Cap 1: Brand logo, current and voltage rating Cap 2: Series and agency approval markings MIL-STD-202G, Method 103B, Test Condition A high RH (95%) and elevated temperature (40O C) for 240 hours Available in Bulk (M=1000 pcs/pkg) or on Tape/Reel (MRET1=1000 pcs/reel) Salt Spray Packaging MIL-STD-202G, Method 101D, Test Condition B (c) 2009 Littelfuse, Inc. Specifications are subject to change without notice. Please refer to www.littelfuse.com/series/235.html for current information. 295 Revised: January 7, 2009 235 Series 235 Series Product Characteristics Introduction to & Circuit Protection Axial Lead Cartridge Fuses Transientology 5x20 mm > Fast-Acting > 235 Series Dimensions Part Numbering System 0235 xxxx M X E P 20+0.5 5.2+0.1 -0.2 0235000P 5.1+0.6 Series Amp Code 5.1+0.6 Refer to Amp Code column of Electrical Characteristics Table 0235.100 XEP to 0235.400 XEP 40 22.5 MAX Quantity Code 6.0 MAX M = 1000 Packaging Code 0.65 X = Filler Option Code E = Axial Leaded 0235.500 XEP to 0235006.XEP 40 22.5 MAX Lead-free 5.8 MAX 0.65* All dimensions in mm Notes: * Ratings above 6.3A o0.8 mm dia lead Packaging Packaging Option 235 Series Bulk Bulk Reel and Tape 235 Series Packaging Specification Quantity Quantity & Packaging Code Taping Width N/A N/A EIA 296-E 1000 1000 1000 MX MXB MRET1 N/A N/A T1=52mm (2.062") 296 Revised: January 7, 2009 (c) 2009 Littelfuse, Inc. Specifications are subject to change without notice. Please refer to www.littelfuse.com/series/235.html for current information.