SMBJ5.0 thru 188CA Vishay Semiconductors formerly General Semiconductor Surface Mount TRANSZORB(R) Transient Voltage Suppressors DO-214AA (SMB J-Bend) Cathode Band 0.155 (3.94) 0.130 (3.30) 0.086 (2.20) 0.077 (1.95) 0.180 (4.57) 0.160 (4.06) Stand-off Voltage 5.0 to 188V Peak Pulse Power 600W ed e d n Exte e Rang g a t l Vo Mounting Pad Layout 0.106 MAX (2.69 MAX) 0.083 MIN (2.10 MIN) 0.012 (0.305) 0.006 (0.152) 0.096 (2.44) 0.084 (2.13) 0.050 MIN (1.27 MIN) 0.060 (1.52) 0.030 (0.76) 0.220 (5.59) 0.205 (5.21) 0.008 (0.203) Max. 0.220 REF Dimensions in inches and (millimeters) Features Mechanical Data * Underwriters Laboratory Recognition under UL standard for safety 497B: Isolated Loop Circuit Protection * Low profile package with built-in strain relief for surface mounted applications * Glass passivated junction * Low incremental surge resistance, excellent clamping capability * 600W peak pulse power capability with a 10/1000s waveform, repetition rate (duty cycle): 0.01% * Very fast response time * High temperature soldering guaranteed: 250C/10 seconds at terminals Case: JEDEC DO-214AA molded plastic over passivated junction Terminals: Solder plated, solderable per MIL-STD-750, Method 2026 Polarity: For unidirectional types the band denotes the cathode, which is positive with respect to the anode under normal TVS operation Weight: 0.003 oz., 0.093 g Flammability: Epoxy is rated UL 94V-0 Packaging Codes - Options (Antistatic): 51 - 2K per Bulk box, 20K/carton 52 - 750 per 7" plastic Reel (12mm tape), 15K/carton 5B - 3.2K per 13" plastic Reel (12mm tape), 32K/carton Devices for Bidirectional Applications For bi-directional devices, use suffix C or CA (e.g. SMBJ10C, SMBJ10CA). Electrical characteristics apply in both directions. Maximum Ratings & Thermal Characteristics Parameter Ratings at 25C ambient temperature unless otherwise specified. Symbol Value Unit Peak pulse power dissipation with a 10/1000s waveform(1)(2) (Fig. 1) PPPM Minimum 600 W Peak pulse current with a 10/1000s waveform(1) IPPM See Table Below A Peak forward surge current 8.3ms single half sine-wave uni-directional only (2) IFSM 100 A Typical thermal resistance, junction to ambient(4) RJA 100 C/W Typical thermal resistance, junction to lead RJL 20 C/W TJ, TSTG -55 to +150 C Operating junction and storage temperature range Notes: (1) Non-repetitive current pulse, per Fig.3 and derated above TA = 25C per Fig. 2 (2) Mounted on 0.2 x 0.2" (5.0 x 5.0mm) copper pads to each terminal (3) Mounted on minimum recommended pad layout Document Number 88392 26-Sep-02 www.vishay.com 1 SMBJ5.0 thru 188CA Vishay Semiconductors formerly General Semiconductor Electrical Characteristics Ratings at 25C ambient temperature unless otherwise specified. V F Device Type Modified "J" Bend Lead +SMBJ5.0 +SMBJ5.0A(5) +SMBJ6.0 +SMBJ6.0A +SMBJ6.5 +SMBJ6.5A +SMBJ7.0 +SMBJ7.0A +SMBJ7.5 +SMBJ7.5A +SMBJ8.0 +SMBJ8.0A +SMBJ8.5 +SMBJ8.5A +SMBJ9.0 +SMBJ9.0A +SMBJ10 +SMBJ10A +SMBJ11 +SMBJ11A +SMBJ12 +SMBJ12A +SMBJ13 +SMBJ13A +SMBJ14 +SMBJ14A +SMBJ15 +SMBJ15A +SMBJ16 +SMBJ16A +SMBJ17 +SMBJ17A +SMBJ18 +SMBJ18A +SMBJ20 +SMBJ20A +SMBJ22 +SMBJ22A +SMBJ24 +SMBJ24A +SMBJ26 +SMBJ26A +SMBJ28 +SMBJ28A +SMBJ30 +SMBJ30A Device Marking Code UNI BI KD KD KE KE KF KF KG KG KH AH KK AK KL KL KM KM KN AN KP AP KQ AQ KR AR KS AS KT AT KU AU KV AV KW AW KX AX KY KY KZ KZ LD BD LE BE LF LF LG LG LH BH LK BK LL BL LM BM LN LN LP LM LQ LQ LR LR LS BS LT BT LU LU LV LV LW BW LX BX LY BY LZ BZ MD CD ME CE MF MF MG MG MH CH MK CK Breakdown Voltage V(BR) at IT (1) (V) Min Max 6.40 7.82 6.40 7.07 6.67 8.15 6.67 7.37 7.22 8.82 7.22 7.98 7.78 9.51 7.78 8.60 8.33 10.2 8.33 9.21 8.89 10.9 8.89 9.83 9.44 11.5 9.44 10.4 10.0 12.2 10.0 11.1 11.1 13.6 11.1 12.3 12.2 14.9 12.2 13.5 13.3 16.3 13.3 14.7 14.4 17.6 14.4 15.9 15.6 19.1 15.6 17.2 16.7 20.4 16.7 18.5 17.8 21.8 17.8 19.7 18.9 23.1 18.9 20.9 20.0 24.4 20.0 22.1 22.2 27.1 22.2 24.5 24.4 29.8 24.4 26.9 26.7 32.6 26.7 29.5 28.9 35.3 28.9 31.9 31.1 38.0 31.1 34.4 33.3 40.7 33.3 36.8 Test Current IT (mA) 10 10 10 10 10 10 10 10 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 Stand-off Voltage VWM (V) 5.0 5.0 6.0 6.0 6.5 6.5 7.0 7.0 7.5 7.5 8.0 8.0 8.5 8.5 9.0 9.0 10 10 11 11 12 12 13 13 14 14 15 15 16 16 17 17 18 18 20 20 22 22 24 24 26 26 28 28 30 30 = 3.5V at IF = 50A (uni-directional only) Maximum Maximum Maximum Reverse Leakage Peak Pulse Surge Clamping at VWM Current IPPM Voltage at IPPM (3) (2) ID (A) (A) VC (V) 800 62.5 9.6 800 65.2 9.2 800 52.6 11.4 800 58.3 10.3 500 48.8 12.3 500 53.6 11.2 200 45.1 13.3 200 50.0 12.0 100 42.0 14.3 100 46.5 12.9 50 40.0 15.0 50 44.1 13.6 20 37.7 15.9 20 41.7 14.4 10 35.5 16.9 10 39.0 15.4 5.0 31.9 18.8 5.0 35.3 17.0 5.0 29.9 20.1 5.0 33.0 18.2 5.0 27.3 22.0 5.0 30.2 19.9 1.0 25.2 23.8 1.0 27.9 21.5 1.0 23.3 25.8 1.0 25.9 23.2 1.0 22.3 26.9 1.0 24.6 24.4 1.0 20.8 28.8 1.0 23.1 26.0 1.0 19.7 30.5 1.0 21.7 27.6 1.0 18.6 32.2 1.0 20.5 29.2 1.0 16.8 35.8 1.0 18.5 32.4 1.0 15.2 39.4 1.0 16.9 35.5 1.0 14.0 43.0 1.0 15.4 38.9 1.0 12.9 46.6 1.0 14.3 42.1 1.0 12.0 50.0 1.0 13.2 45.4 1.0 11.2 53.5 1.0 12.4 48.4 Notes: (1) Pulse test: tp 50ms (2) Surge current waveform per Fig. 3 and derate per Fig. 2 (3) For bi-directional types having VWM of 10 Volts and less, the ID limit is doubled (4) All terms and symbols are consistent with ANSI/IEEE C62.35 (5) For the bidirectional SMBG/SMBJ5.0CA, the maximum V(BR) is 7.25V + Underwriters Laboratory Recognition for the classification of protectors (QVGQ2) under the UL standard for safety 497B and file number E136766 for both uni-directional and bi-directional devices www.vishay.com 2 Document Number 88392 26-Sep-02 SMBJ5.0 thru 188CA Vishay Semiconductors formerly General Semiconductor Electrical Characteristics Ratings at 25C ambient temperature unless otherwise specified. V F Device Type Modified "J" Bend Lead +SMBJ33 +SMBJ33A +SMBJ36 +SMBJ36A +SMBJ40 +SMBJ40A +SMBJ43 +SMBJ43A +SMBJ45 +SMBJ45A +SMBJ48 +SMBJ48A +SMBJ51 +SMBJ51A +SMBJ54 +SMBJ54A +SMBJ58 +SMBJ58A +SMBJ60 +SMBJ60A +SMBJ64 +SMBJ64A +SMBJ70 +SMBJ70A +SMBJ75 +SMBJ75A +SMBJ78 +SMBJ78A +SMBJ85 +SMBJ85A +SMBJ90 +SMBJ90A +SMBJ100 +SMBJ100A +SMBJ110 +SMBJ110A +SMBJ120 +SMBJ120A +SMBJ130 +SMBJ130A +SMBJ150 +SMBJ150A +SMBJ160 +SMBJ160A +SMBJ170 +SMBJ170A SMBJ188 SMBJ188A Device Marking Code UNI BI ML CL MM CM MN CN MP CP MQ CQ MR CR MS CS MT CT MU MU MV MV MW MW MX MX MY MY MZ MZ ND ND NE NE NF NF NG NG NH NH NK NK NL NL NM NM NN NN NP NP NQ NQ NR NR NS NS NT NT NU NU NV NV NW NW NX NX NY NY NZ NZ PD PD PE PE PF PF PG PG PH PH PK PK PL PL PM PM PN PN PP PP PQ PQ PR PR PT PT PS PS Breakdown Voltage V(BR) at IT (1) (V) Min Max 36.7 44.9 36.7 40.6 40.0 48.9 40.0 44.2 44.4 54.3 44.4 49.1 47.8 58.4 47.8 52.8 50.0 61.1 50.0 55.3 53.3 65.1 53.3 58.9 56.7 69.3 56.7 62.7 60.0 73.3 60.0 66.3 64.4 78.7 64.4 71.2 66.7 81.5 66.7 73.7 71.1 86.9 71.1 78.6 77.8 95.1 77.8 86.0 83.3 102 83.3 92.1 86.7 106 86.7 95.8 94.4 115 94.4 104 100 122 100 111 111 136 111 123 122 149 122 135 133 163 133 147 144 176 144 159 167 204 167 185 178 218 178 197 189 231 189 209 209 255 209 231 Test Current IT (mA) 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 Stand-off Voltage VWM (V) 33 33 36 36 40 40 43 43 45 45 48 48 51 51 54 54 58 58 60 60 64 64 70 70 75 75 78 78 85 85 90 90 100 100 110 110 120 120 130 130 150 150 160 160 170 170 188 188 = 3.5V at IF = 50A (uni-directional only) Maximum Maximum Maximum Reverse Leakage Peak Pulse Surge Clamping at VWM Current IPPM Voltage at IPPM (3) (2) ID (A) (A) VC (V) 1.0 10.2 59.0 1.0 11.3 53.3 1.0 9.3 64.3 1.0 10.3 58.1 1.0 8.4 71.4 1.0 9.3 64.5 1.0 7.8 76.7 1.0 8.6 69.4 1.0 7.5 80.3 1.0 8.3 72.7 1.0 7.0 85.5 1.0 7.8 77.4 1.0 6.6 91.1 1.0 7.3 82.4 1.0 6.2 96.3 1.0 6.9 87.1 1.0 5.8 103 1.0 6.4 93.6 1.0 5.6 107 1.0 6.2 96.8 1.0 5.3 114 1.0 5.8 103 1.0 4.8 125 1.0 5.3 113 1.0 4.5 134 1.0 5.0 121 1.0 4.3 139 1.0 4.8 126 1.0 4.0 151 1.0 4.4 137 1.0 3.8 160 1.0 4.1 146 1.0 3.4 179 1.0 3.7 162 1.0 3.1 196 1.0 3.4 177 1.0 2.8 214 1.0 3.1 193 1.0 2.6 231 1.0 2.9 209 1.0 2.2 268 1.0 2.5 243 1.0 2.1 287 1.0 2.3 259 1.0 2.0 304 1.0 2.2 275 1.0 1.7 344 1.0 2.0 328 Notes: (1) Pulse test: tp 50ms (2) Surge current waveform per Fig. 3 and derate per Fig. 2 (3) For bi-directional types having VWM of 10 Volts and less, the ID limit is doubled (4) All terms and symbols are consistent with ANSI/IEEE C62.35 + Underwriters Laboratory Recognition for the classification of protectors (QVGQ2) under the UL standard for safety 497B and file number E136766 for both uni-directional and bi-directional devices Document Number 88392 26-Sep-02 www.vishay.com 3 SMBJ5.0 thru 188CA Vishay Semiconductors formerly General Semiconductor Ratings and Characteristic Curves (TA = 25C unless otherwise noted) Fig. 2 - Pulse Derating Curve Fig. 1 - Peak Pulse Power Rating Curve Peak Pulse Power (PPP) or Current (IPP) Derating in Percentage, % PPPM -- Peak Pulse Power (kW) 100 10 1 0.2 x 0.2" (0.5 x 0.5mm) Copper Pad Areas 100 75 50 25 0 0.1 0.1s 1.0s 10s 100s 1.0ms 10ms 0 td -- Pulse Width (sec.) Fig. 3 - Pulse Waveform 75 100 TJ = 25C Pulse Width (td) is defined as the point where the peak current decays to 50% of IPPM tr = 10sec. Peak Value IPPM 100 Half Value -- IPP 2 IPPM 50 10/1000sec. Waveform as defined by R.E.A. 1.0 0 3.0 2.0 200 VR, Measured at Stand-Off Voltage, VWM 100 TJ = 25C f = 1.0MHz Vsig = 50mVp-p Uni-Directional Bi-Directional 10 4.0 1 10 100 200 VWM -- Reverse Stand-Off Voltage (V) Fig. 6 - Maximum Non-Repetitive Peak Forward Surge Current Fig. 5 - Typical Transient Thermal Impedance IFSM -- Peak Forward Surge Current (A) 100 10 1.0 200 8.3ms Single Half Sine-Wave (JEDEC Method) Unidirectional Only 100 10 0.01 0.1 1 10 tp -- Pulse Duration (sec) www.vishay.com 4 175 1,000 t -- Time (ms) 0.1 0.001 150 Measured at Zero Bias td 0 125 Fig. 4 - Typical Junction Capacitance 6,000 CJ -- Junction Capacitance (pF) IPPM -- Peak Pulse Current, % IRSM 50 TA -- Ambient Temperature (C) 150 Transient Thermal Impedance (C/W) 25 100 1000 1 100 10 Number of Cycles at 60HZ Document Number 88392 26-Sep-02