DATA SHEE
T
SURFACE-MOUNT CERAMIC
MULTILAYER CAPACITORS
Class 2, Y5V
6.3/10
V
Product Specification – Apr 05, 2004 V.8
Phycomp Product specification
Surface-mount ceramic
multilayer capacitors Class 2, Y5V
6.3/10 V
2004 Apr 05 Rev.8 2 www.yageo.com
FEATURES
• Six standard sizes
• High capacitance per unit volume
• Supplied in tape on reel or in bulk
case
• NiSn terminations.
APPLICATIONS
• Consumer electronics, for
example:
− Tuners
− Television receivers
− Video recorders
− All types of cameras.
DESCRIPTION
The capacitor consists of a
rectangular block of ceramic
dielectric in which a number of
interleaved metal electrodes are
contained. This structure gives rise
to a high capacitance per unit
volume.
The inner electrodes are connected
to the two terminations and finally
covered with a layer of plated tin
(NiSn). A cross section of the
structur e is sh own in Fig.1.
QUICK REFERENCE DATA
DESCRIPTION VALUE
Rated voltage Ur (DC) 6.3 V, 10 V
Capacitance range (E3 series) 100 nF to 47 µF; note 1
Tolerance on capacitance −20% to +80%
Test voltage (DC) for 1 minute: 2.5 × Ur
Sectional specifications IEC 60384-10, second edition 1989-04;
also based on CECC 32 100
Detailed specification based on CECC 32 101-801
End terminations NiSn
Climatic category (IEC 60 68) 25/85/21
Note
1. Measured at 25
°C, 1 V, 1 kHz for C < 22 µF and 0.5 V, 120 Hz for C ≥ 22
µF, using a four-gauge method.
MLB457
terminations
electrodes
ceramic material
Fig.1 Construction of a ceramic multilayer capacitor .
Phycomp Product specification
Surface-mount ceramic
multilayer capacitors Class 2, Y5V
6.3/10 V
2004 Apr 05 Rev.8 3 www.yageo.com
MECHANICAL DATA
MBB211
T
L4
L1
L2L3
W
Fig.2. Component outline.
For dimensions see Table 1.
Physical dimensions
Table 1 Capacitor dimensions; see Fig.2
T L2 and L3 .
CASE SIZE L1 W MIN. MAX. MIN. MAX.
L4
MIN.
Dimensions in millimetres
0402 1.0 ±0.05 0.50
±0.05 0.45 0.55 0.15 0.30 0.40
0603 1.6 ±0.10 0.8 ±0.07 0.73 0.87 0.25 0.65 0.40
0805 2.0
±0.10 1.25
±0.10 1.15 1.35 0.25 0.75 0.55
1206 3.2
±0.20 1.6
±0.15 1.45 1.75 0.25 0.75 1.40
1210 3.2
±0.20 2.5
±0.20 1.70 2.20 0.25 0.75 1.40
1812 4.5 ±0.20 3.2 ±0.20 2.30 2.70 0.25 0.75 2.20
Dimensions in inches
0402 0.040 ±0.002 0.020
±0.002 0.018 0.022 0.008 0.012 0.016
0603 0.063 ±0.004 0.032 ±0.003 0.029 0.035 0.010 0.026 0.016
0805 0.079
±0.004 0.049
±0.004 0.020 0.053 0.010 0.030 0.022
1206 0.126
±0.008 0.063
±0.006 0.020 0.069 0.010 0.030 0.056
1210 0.126
±0.008 0.098
±0.006 0.067 0.087 0.010 0.030 0.056
1812 0.177 ±0.006 0.126 ±0.006 0.091 0.106 0.010 0.030 0.087
Phycomp Product specification
Surface-mount ceramic
multilayer capacitors Class 2, Y5V
6.3/10 V
2004 Apr 05 Rev.8 4 www.yageo.com
SELECTION CHART FOR 10 V
10 V
C
(nF) LAST TWO DIGITS
OF 12NC 0402 0603 0805 1206 1210 1812
100 49
150 52 0.5 ±0.05
220 54
330 −
470 58 0.8 ±0.07
680 −
1,000 63 0.85 ±0.10
1,500 65
2,200 67 0.8 ±0.07
3,300 69 1.25 ±0.10
4,700 72 1.15 ±0.10
6,800 74
10,000 76 1.25 ±0.10 1.9 ±0.2
15,000 78 1.6 ±0.15
22,000 81 1.5 ±0.10
47,000 85 2.5 ±0.2
Note
1. Values in shaded cells indicate thickness class.
SELECTION CHART FOR 6.3 V
6.3 V
C
(nF) LAST TWO DIGITS
OF 12NC 0402 0603 0805 1206 1210
470 58 0.5 ±0.05
680 −
1,000 63 0.5 ±0.05
1,500 65
2,200 67 0.8 ±0.07
3,300 69
4,700 72
6,800 74 1.15 ±0.10
10,000 76 1.25 ±0.10
15,000 78
22,000 81 1.6 ±0.15
47,000 85 2.0 ±0.2
Note
1. Values in shaded cells indicate thickness class.
Phycomp Product specification
Surface-mount ceramic
multilayer capacitors Class 2, Y5V
6.3/10 V
2004 Apr 05 Rev.8 5 www.yageo.com
Thickness classification and packing quantities
8 mm TAPE WIDTH QUANTITY
PER REEL
12 MM TAPE
WIDTH
QUANTITY
PER REEL
∅180 mm; 7" ∅330 mm; 13" ∅180 mm; 7"
BLISTER
QUANTITY PER BULK
CASE
THICKNESS
CLASSIFICATION
(mm)
PAPER BLISTER PAPER BLISTER 1812 0402 0603 0805
0.5 ±0.05 10
,
000 − 50
,
000
−
−
50
,
000 50
,
000
−
0.8 ±0.07 4
,
000 − 15
,
000
−
−
− 15
,
000
−
0.85 ±0.10 4
,
000 − 15
,
000
−
−
− −
−
1.15 ±0.10 − 3
,
000
−
10
,
000
−
− −
−
1.25 ±0.10 − 3
,
000
−
10
,
000
−
− − 5
,
000
1.5 ±0.10 − 2
,
000
−
−
−
− −
−
1.6 ±0.15 − 2
,
500
−
7
,
000
−
− −
−
1.9 ±0.2 − 2
,
000
−
−
−
− −
−
2.0 ±0.2 − 1
,
000
−
−
−
− −
−
2.5 ±0.2 − −
−
−
500 − −
−
Phycomp Product specification
Surface-mount ceramic
multilayer capacitors Class 2, Y5V
6.3/10 V
2004 Apr 05 Rev.8 6 www.yageo.com
2 2 X X X X X X 9 X X X
Carrier type
22
38
50
55
54
blister
paper
blister (6.3 V)
paper (6.3 V)
bulk
Rated voltage - Termination
20
24 6.3 V ; NiSn
10 V ; NiSn
Size
7
6
0
1
2
4
0402
0603
0805
1206
1210
1812
Capacitance value(1)
Tolerance
8−20/+80%
Packaging(2)
1
5
4
reel: ∅180 mm; 7"
reel: ∅330 mm; 13"
bulk case
CCB239_a
(1) Refer to chapter “Selection chart for 6.3 V” and “Selection chart for 10 V”
(2) Quantity on reel depends on thickness classification, see section “Thickness classification and packing quantities”.
ORDERING INF OR MATION
Com
onents ma
be ordered b
usin
either a Ph
y
com
p
’s uni
q
ue 12NC or sim
p
le 15-di
g
it clear text code.
Ordering code 12NC (preferred)
Clear text code
EXAMPLE: 06032F105Z24BB0D
Size
Code Temp.
Char. Capacitance Tol. Vol. Termination Packing Marking Series
0402
0603
0805
1206
1210
1812
2F = Y5V 105 = 1000000
pF; the third di git
signifies the
multiplying f actor:
5 = × 100,000
6 = × 1,000,000
Z = −20 /+80% 5 = 6.3 V
6 = 10 V B = NiSn 2 = 180 mm; 7" paper
3 = 330 mm; 13" paper
B = 180 mm; 7" bliste r
F = 330 mm; 13" blister
P = bulk case
0 = no marking
D = BME
Phycomp Product specification
Surface-mount ceramic
multilayer capacitors Class 2, Y5V
6.3/10 V
2004 Apr 05 Rev.8 7 www.yageo.com
ELECTRICAL CHARACTERISTICS
Class 1 capacitors; Y5V dielectric; NiSn terminations
Unless otherwise stated all electrical values apply at an ambient temperature of 25 ±1 °C, an atmospheric pressure of
86 to 105 kPa, and a relative humidity of 63 to 67%.
DESCRIPTION VALUE
Capacitance range (E6 series); note 1
100 nF to 47 µF
Tolerance on capacitance after 1,000 hours
−20% to +80% (Z)
Tan δ; note 1
All 10 V (except 0402 and 220nF, 1210 and 22 µF; 1812 and 47 µF) ≤12.5%
6.3 V: 1210 and 22 µF, 1812 and 47 µF ≤15%
10 V: 0402 and 220 nF ≤15%
Insulation resistance after 1 minute at Ur (DC) Rins × C ≥ 500 seconds
Ageing typical 7% per time decade
Resistance to soldering heat 260 °C; 10 seconds
Note
1. Measured at 25
°C, 1 V, 1 kHz for C < 22 µF and 0.5 V, 120 Hz for C ≥ 22 µF, using a four-gauge method.
Phycomp Product specification
Surface-mount ceramic
multilayer capacitors Class 2, Y5V
6.3/10 V
2004 Apr 05 Rev.8 8 www.yageo.com
TESTS AND REQUIREME NTS
Table 2 Test procedures and requirements
IEC
60384-10/
CECC 32 100
CLAUSE
IEC
60068-2
TEST
METHOD
TEST PROCEDURE REQUIREMENTS
4.4 mounting the capacitors may be
mounted on printed-circuit
boards or ceramic substrates
by applying wave soldering,
reflow soldering (including
vapour phase soldering) or
conductive adhesive
no visible damage
4.5 visual inspection and
dimension check any applicable method using
×10 magnification in accordance with
specification
4.6.1 capacitance at 25 °C
C < 22 µF, f = 1 kHz, 1 Vrms
C ≥ 22 µF, f = 120 Hz, 0.5 Vrms
within specified tolerance
4.6.2 tan
δ at 25 °C
C < 22 µF, f = 1 kHz, 1 Vrms
C ≥ 22 µF, f = 120 Hz, 0.5 Vrms
in accordance with
specification
4.6.3 insulation resistance
at Ur (DC) for 1 min u te in accordance with
specification
4.6.4 voltage proof 2.5 × Ur for 1 minute no breakdown or flashover
4.7.1 temperature
coefficient between minimum and
maximum temperature in accordance with
specification
4.8 adhesion a force of 5 N applied for 10 s
to the line joining the
terminations and in a plane
parallel to the substrate
no visible damage
mounted in accordance with
CECC 32 100, paragraph 4.4 no visible damage
4.9 bond strength of
plating on end face
conditions: bending 1 mm at a
rate of 1 mm/s, radius jig 340
mm
l∆C/Cl: ≤30%
resistance to
soldering heat preconditioning:
120 to 150 °C during 1 minute;
260 ±5 °C for 10 ±0.5 s in a
static solder bath
the terminations shall be well
tinned after recovery
l∆C/Cl: ±20%
tan δ: original specification
Rins: original specification
4.10 Tb
resistance to
leaching 260 ±5 °C for 30 ±1 s
in a static solder bath using visual enlargement of
×10, dissolution of the
terminations shall not
exceed 10%
Phycomp Product specification
Surface-mount ceramic
multilayer capacitors Class 2, Y5V
6.3/10 V
2004 Apr 05 Rev.8 9 www.yageo.com
IEC
60384-10/
CECC 32 100
CLAUSE
IEC
60068-2
TEST
METHOD
TEST PROCEDURE REQUIREMENTS
4.11 Ta solderability zero hour test, and test after
storage (20 to 24 months) in
original packing in normal
atmosphere;
unmounted chips completely
immersed for 2 ±0.5 s in a
solder bath at 235 ±5 °C
the terminations shall be
well tinned
4.12 Na rapid change of
temperature preconditioning:
−25 to +85 °C; 5 cycles no visible damage
after 48 hours recovery:
l∆C/Cl: ≤20%
4.14 Ca damp heat preconditioning:
(thermal treatment):
500 ±12 hours at 40 °C;
90 to 95% RH;
no visible damage
after 48 hours recovery:
l∆C/Cl: +30%/−40%
tan δ: ≤15%
Rins: 500 MΩ or RiCR ≥ 25 s,
whichever is less
damp heat;
with Ur load initialization: 48 hours after Ur
at 40 °C;
for 1 hour (for initial value
measurement);
500 ±12 hours at 40 °C;
90 to 95% RH; Ur applied
pretreatment:
Ur at 40 °C for 1 hour, after
48 hours recovery:
l∆C/Cl: +30%/−40%
tan δ: ≤15%
Rins: 500 MΩ or RiCR ≥ 25 s,
whichever is less
4.15 endurance initialization:
2 × Ur at 85 °C for 1 hour,
(initial value measurement after
48 hours, recovery at room
temperature) ;
1,000 hours at 85 °C and
2 × Ur applied
pretreatment:
Ur at 40 °C for 1 hour, after
48 hours recovery:
l∆C/Cl: +30%/−40%
tan δ: ≤15%
Rins: 1000 MΩ or RiCR ≥ 50 s,
whichever is less
Phycomp Product specification
Surface-mount ceramic
multilayer capacitors Class 2, Y5V
6.3/10 V
2004 Apr 05 Rev.8 10 www.yageo.com
REVISION HISTORY
Revision Date Change
Notification Description
Rev.5 2001 May 30 - - Converted to Phycomp brand.
Rev.6 2003 Jun 26 - - Updated company logo.
- Combined 6.3 V and 10 V data sheets.
- Capacitance range changed, refer to selection chart.
Rev.7 2003 Sep 26 - - Size 1206, 1210 L1 dimensions revised.
- Tan δ 6.3 V, 10 V amended.
Rev. 8 2004 Apr 05 - - Thickness for Y5V 1210 22uF 10V revised