ACTP-1525 Coaxial Tunnel Diode Detector Features: * Contains hermetically sealed modules, internal RF matching, DC return, and RF bypass capacitor. * The video port is protected from static or transient charges. * Input impedance matching. * Models may be chosen for broadband RF performance of for optimized narrow bands Specifications: Parameter Specification Units GHz Typical TSS 1- 2 800 0.25 -51 Typical VSWR 2.5:1 Ratio 20 pF Frequency Range (min) Sensitivity (min) Flatness vs. Frequency (max) Nominal Video Capacitance mV/mW dB dBm Notes: SCREENING: Maximum input power: +14 dBm (3 dB guardband for +17 dBm possible burnout) Internal Visual per MIL-STD-883, Method 2017 Sensitivity is measured into an open circuit load (>10k ohm). VSWR is measured at or below -20 dBm input power level. Video capacitance is used for RF bypass. This value can be changed if required for video response time. Contact the factory for more information. Environmental Specifications: Temperature Cycle: -65C to +100C, 10 cycles OPTIONAL HIGH-REL SCREENING (Ref MIL-PRF-38534): Stabilization Bake per MIL-STD-883, Method 1008 Temperature Cycle per MIL-STD-883, Method 1010 Constant Acceleration per MIL-STD-883, Method 2001 Burn-in per MIL-STD-883, Method 1015 Designed to meet: Leak Test per MIL-STD-883, Method 1014 MIL-E-5400, MIL-STD-202, MIL-E-16400 External Visual per MIL-STD-883, Method 2009 Operating Temp: -55C to +125C Storage Temp: -65C to +150C Humidity: MIL-STD-202F, M103, Cond B Shock: MIL-STD-202F, M213, Cond B Altitude: MIL-STD-202F, M105, Cond B Vibration: MIL-STD-202F, M204, Cond B Thermal Shock: MIL-STD-202F, M107, Cond A Temperature Cycle: MIL-STD-202F, M105C, Cond D SIGNAL & CONTROL SOLUTIONS Revision Date: 10/5/2013 40 Industrial Way East, Eatontown , NJ 07724 [USA] Phone: (732) 460-0212, Fax: (732) 460-0214 www.aeroflex.com/ascs, email: ascs-sales@aeroflex.com ACTP-1525 Coaxial Tunnel Diode Detector SIGNAL & CONTROL SOLUTIONS Outline Drawing: STANDARD CASE STYLE C3 (Optional Case Styles - C8, C15, C32) Part Number Ordering Information: * * * * Add desired polarity suffix: "N" for Negative, "P" for Positive (Ex: ACTP-1525N) Add desired case style suffix: "C3" (Ex: ACTP-1525NC3) Add "R" suffix: Reverse Connector Configuration (Ex: ACTP-1525NC3R) (SMA Female Input/SMA Male Output) Add "-RC" suffix: RoHS-compliant (Ex: ACTP-1525NZC3-RC) ISO 9001:2008 certified Aeroflex Signal & Control Solutions Aeroflex Microelectronic Solutions 40 Industrial Way East Eatontown , NJ 07724 [USA] Fax: (732) 460-0214 Sales Phone: (732) 460-0212 ASCS-sales@aeroflex.com www.aeroflex.com/Microwave www.aeroflex.com/ASCS Aeroflex Signal & Control Solutions reserves the right to make changes to any products and services herein at any time without notice. Consult Aeroflex or an authorized sales representative to verify that the information in this data sheet is current before using this product. Aeroflex does not assume any responsibility or liability arising out of the application or use of any product or service described herein, except as expressly agreed to in writing by Aeroflex; nor does the purchase, lease, or use of a product or service from Aeroflex convey a license under any patent rights, copyrights, trademark rights, or any other of the intellectual rights of Aeroflex or of third parties. Copyright 2013 Aeroflex Signal & Control Solutions. All rights reserved. Revision Date: 10/5/2013 Our passion for performance is defined by three attributes represented by these three icons: solution-minded, performance-driven and customer-focused.